Lookup in MS Access not working

I have three tables in my MS Access
1) Employee : having field as - Name , person id
2) Payudds : udds(number)
3) employeeuddslink : contains to lookup fields id (look upto name in employee table and pay (look up to udds in payudds table)
When I save the table and open employeeuddslink in datasheet view the table is empty.
Could you please help me with this.
Regards, Hitesh

1 of 2 causes:
1. because table employeeuddslink contains lookup fields does not automatically populate any data into it - so you must now enter (select) data to populate the table
2. a lookup field set up typically hides the key field, and displays the next field along side; this is a feature intended to quicken design in most cases. each field width is set in the properties of the field - separated by a ';' so if you see 0;1"
(or whatever) - - change that 0 to 1" (or whatever)

Similar Messages

Mail yahoo pop access not working.

This has been going on for 2 days now. Re set up my account in mail but nothing just the ! next to the mailbox. Anyone else having problems?

Sending an email is something totally different again - you can send yourself or anyone else an email to any email address.
You can also send or forward any email while on your Yahoo account to yourself or anyone else.
Setting up Yahoo to automatically forward emails to your home email address is something else. Here is an excerpt from Yahoo Help:
+The ability to access Yahoo! Mail using an email reader program such as Outlook, Eudora, or Thunderbird is only available to customers of our premium Yahoo! Mail Plus service. To determine whether you have purchased this service, please visit the My Services page.+
Although this does not mention Apple Mail, it functions exactly like Outlook, etc. so it will not work. Here is the link to the entire help page:
http://help.yahoo.com/l/us/yahoo/mail/yahoomail/mailplus/pop/pop-35.html;_ylt=An EHIP08O6GRC7cEYzjbTbe7myN4
I have no idea why it might have worked for you previously, but according to Yahoo, it cannot be done unless you pay for the service.
So, unless I've totally misunderstood what you are trying to say, I do not have a different answer and it does not have anything to do with your Mac or OS.

Expression using Map access not working....

I am attempting to use the ability to access a Map by key from a binding expression on the jsp. I have extended HashMap and overridden the get method in order to return a Boolean from the get(key) method.
This works:
rendered="#{bean.enabledFunctionSecurityMap['key1']}"
it ends up calling the bean.getEnableFunctionSecurityMap().get("key1");
This should work also but doesn't:
rendered="#{bean.enabledFunctionSecurityMap['key1'] or bean.enabledFunctionSecurityMap['key2']}"
Any reason why a single Boolean returned from a Map would work fine, but a more complex statement with 2 Booleans will not work. Doing a statement like this just accessing multiple boolean getter functions on a bean works, how come access muiltiple Map returns does not?
Any help is appreciated.
Thanks,
Mike

All righty then, I solved my own problem.
There were actually 2 issues.
1. I could so far only get this to work if the Overridden Map Object is registered as a manged-bean itself.
2. I was testing to see if it worked by using System.out.println methods in my overridden get() method. Appearantly the JSF EL is smarter than I am. If you have #{binding1 or binding2} and binding1 evaluates to True, binding2 is never evaluated. The expression is short circuited and returns true... DUH....
So this expression fires both bindings....
rendered="#{enabled['key1'] and not enabled['key2']}"
Where enabled is...
<managed-bean>
<managed-bean-name>enabled</managed-bean-name>
<managed-bean-class>security.EnabledFunctionSecurityMap</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
Next step will be to try and figure out how to get this to work where the EnabledFunctionSecurityMap is on another bean.
Hope this helps anyone trying to do the same.
Mike

IOS 8.02 guided access not working for Ipad 2

Will the next update for iOS 8 fix the issue for guides access for Ipad 2? Issue; function not working at all. And when will this update come?
We have now tried everything we can think of. Reset settings, totale factory reset etc. This doen both on the Ipad and thorugh iTunes.
For us the Ipad got useless with iOS 8 as we us it as a visitor kiosk using the app SIGN IN. We really regret updating.... please fix asap

I can confirm that this works on 3rd Generation iPads. But not 2nd Generation iPads. I have found that if Guided access was enabled prior to the upgrade it might reset in this process.
Turn off Guided Access in Accessibility / Settings.
Hard reboot. (Hold Home and Lock buttons for 7 seconds)
Turn on Guided Access in Accessibility / Settings. Reset Passcode.
Anyone have luck with a newer model?

Color lookup shapers and preluts not working as expected.

The color lookup adjustment layers do not seem to recognise shaper or pre-luts. Has anyone been able to get this working? Is there any documentation or specifications on this topic? I seem to be just getting the very basic "how to use a color lookup" catagories.
Thanks in advance

Cs6 13.01.
We have tried .3dl but the files were not showing up to select and load. .cube seems to be visible. Is there any documentation on what photoshop is actually doing to the image to be visible on the monitor..ie gamma 2.2 adjustments on the incoming files .icc profile?

10.8 Server - AFP Guest access not working

Hi Folks
I have a brand new Mac Mini server running the latest 10.8.4 and Server.app from the app store (10.8 / v2 / whatever it's called these days). I have everything up and running perfectly except that no matter what I do when users connect via AFP there is no option for them to connect as guest. It literally just does not even show up in the login dialog.
I have several AFP share points setup to allow guest access, I have enabled the option in System Prefs->Users and Groups->Guest User->Allow guests to connect to shared folders. I have even also enabled it via command line tool; serveradmin settings afp:guestAccess = yes
But no matter what I do any machines connecting (either via browsing to the server via finder and connecting or directly from "Connect to server" using the afp:// URI approach) the login dialog doesn't give us the option to select to connect as guest -- it's just not there at all in the dialog box.
This is fairly urgent, a few more days and this server needs to go into production at our school here and this is essential for the way we need to do things. A little more background information: we are bound to both a local OD setup and a campus wide AD setup (not sure if any of this matters or not).
Help and thanks!

And I guess toggling File Sharing on and off about a dozen times it seems to have finally picked up and is allowing guest access to work :/ Answer my own question!

Timed Access not working on new Airport Extreme (802.11n).

I bought a new Airport Extreme (802.11n) to use as a router for my network. The network has a mixture of Macs and PCs, using a mixture of wired and wireless connections.
I configured the security settings with on the Airport Extreme to Timed Access. I set the default setting is to No Access.
Three computers are set with "Everyday, Between 8:00am and 11:00pm"; however, when it's 11:00pm, nothing happens. The three computers continue to have access.
I know the MAC addresses I entered are correct. Does anyone know why the Timed Access is not working?

Yes, the printer was initially set the same way it always was on my old router. It used to pop right up on the list. After I switched I was getting communication errors. Ok, new setup, I wasn't worried yet. When I got to the setup window and it a new printer wasn't found I tried updating drivers. No luck. I then used the IPP mode to enter the IP address with the address on the Canon screen. It failed. I then did the same setup telling it which software from the driver list to use. It still could not see it. The odd part is that the Canon can obviously see the router as its LAN setting read active and it is receiving the IP. I have proceeded to play with every setting on the printer and it is back to factory reset. Oh, I should mention that I have also tried to use Canons network setup utility software and it can not find the connection either. So I really think this is a problem within the router. I have seen many complaints about this on other forums, but most were looking to use the usb on the print server. My Airport is nowhere near my printer and I don't want to lose my all-in-one functions. Some think hard lined ethernet is ancient, but it really is a nice setup. Fast and reliable.

Anonymous Access Not Working on 3 Lists (Slideshow provided in link)

There are three lists that have anonymous access settings configured.
The anonymous access settings however do not work for some reason. I need to know how to make them show up AGAIN.
The SharePoint administrator before me had all the lists working properly with anonymous access.
I, unfortunately, inherited permissions from parent on all lists and sites, and somehow broke the anonymous permissions. They don't work anymore.
Please see the slideshow to view what I am looking at. This will show all pages and their respective permissions per page.
Anonymous access permissions stopped working on all three lists when I disabled them. When I tried to enable them again, I assumed they would work easily, but they do not.
You will be viewing what I see as a site collection administrator. When I try to view in incognito with these settings it doesn't work.
http://s304.photobucket.com/user/mirzabaig1/slideshow/
http://s304.photobucket.com/user/mirzabaig1/library/?sort=9&page=1

Hi,
Thanks for your sharing! It will be beneficial to others in this forum who meet the same issue in the future.
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Music quick access not working

Apologies if this has been raised before, I had a quick look and couldn't find it.
I have an iPhone 4s and updated (begrudgingly) to IOS6 at the weekend.
I frequently use my iPhone at work for music. From standby I normally double press the home button and it brings up the play/pause menu for my music, from there I can control the current playlist. This still comes up but doesn't work anymore. Similarly if I'm in the quick access menu at the bottom of my phone and scroll left I get access to the music controls, but again these are not working. The only way to play/pause my music is from within the music app.
Does anyone know if this is a known issue with IOS6 or something I should investigate further?
Thanks,
Gillian.

I found a solution by accident, my phone battery died, when I charged it and turned it back on the quick access suddenly worked. The issue reoccurs every now and then, usually when I've rebooted my phone for whatever reason but another reboot always fixes it.
Hope this helps.
Gillian

Web access not working or too slow

I just purchased a new officejet pro 8500a multi task printer. I use wireless internet connect to my router. I am able to receive print jobs from my laptop thru the wireless just fine. But when I try to load an app. it says unable to receive content from web and also i send things through the email on eprint, and it show pending on the eprint site but wont transfer to my printer. I have excellent wireless signal. I'm not sure why my web access is not working . Both laptops I have are wireless and access the interest just fine. Must be something easy I hope.
Thanks

Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
You may also find better help on this board.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Priviledge access not working.

Hi,
After entering “enable” the device doesn’t prompt for any password – just refuses access by “ Error in Authentication”.
Config:
enable secret 4 AbzRD.
aaa new-model
aaa group server tacacs+ server
server 10.12.39.18
aaa authentication login default local enable
(Priv level 15 and the access for the same is not working)
Issue:
When I hit enable it's not providing/prompting me for any password - it says " Error in Authentication".
FarihaASR>en
% Error in authentication.
This happens after I upgraded to firmware to 15.1(S1) on ASR1006.
Any help would be appriciated.
Regards,
FAri

does your ASR have access to your TACACS+ server?
it appears that there is an authentication problem. did anything eles change?

Mac Mini Wake for Network Access Not working after upgrade

After upgrading to the latest OS (10.8) the WOL fuction is not work. This used to work before the release. i could see the Mac mini on my mac book pro even when it was asleep. Once I click on it under the shared resources area I could see the Mac wake up. Now as soon as it goes to sleep it drops from my mac book pro. I am connected via WIFI but also tried via LAN. Same result. Any ideas? Seems to be a bug as I google this issue it appears to be impacting many people.

Same issue here after updating my iMac to OS X 10.8. I can't use Logmein, wireless syncing to iTunes from my iOS devices, or my Logitech Server software for my Logitech Radio. Once the computer goes to sleep, it is invisible to the rest of the network. This all worked fine on 10.4-10.7. I have double-checked that Wake on Network Activity is turned on. I have disabled all networking interfaces except Ethernet. Nothing seems to help.

Oracle Developer Day Jdeveloper 10g early access not work

Oracle Developer Day Workshop Materials
Creating Persistence Services Using Toplink and POJOs
I use Jdeveloper 10 ea :
To create a new workspace with a new project for the model
Application Name EmployeeRequisitionApplication
Directory Name <JDEV_HOME>/mywork/EmployeeRequisitionApplication
Application Package Prefix objectmodel
Application Template No Template [All Technologies]
rename Project1 to Lab1_PersistenceServices
Set project properties
Click the Technology Scope node: Select TopLink in the Available Technologies and click the shuttle button to move to Selected Technologies.
see the following in the Applications Navigator:
--EmployeeRequisitionApplication
----Lab1_PersistenceServices
not like that :
--EmployeeRequisitionApplication
----Lab1_PersistenceServices
---toplink
---toplink mappings
I use Jdeveloper 1012 , Applications Navigator like :
--EmployeeRequisitionApplication
----Lab1_PersistenceServices
---toplink
---toplink mappings
why Jdeveloper 10g ea not work?

I'm not able to reproduce it exactly. It seems to depend on either what I was doing beforehand or what I have open at the same time.
I was able to make it happen on demand awhile ago, but I've closed and restarted the environment since then.
The best I can remember, I had been going up the dialog, starting at the bottom. I was looking for where to enter the location of SQL*Plus. I didn't expect to see it in accelerators, but I was just curious what was in there when...boom. I might have finished one pass thru most of the tree, then started on a second pass when I encountered the problem. Best guess at this point on how to reproduce would be to simulate a user persistently looking for a setting and just not stopping until he found it.
James Brockman

FTP access not working

The server has FTP running (green light is on). However, the Log (Library/Logs/FTP.transfer.log) remains empty in Server Admin.
Connecting to the server with SFTP (e.g., Fugu or WinSCP) is not working.
Fugu returns the error 'Permission denied (publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive).' Also, I cannot create a tunnel.
WinSCP returns the error 'No supported authentication methods available'. How the tunnel works in WinSCP is unclear to me.
Could it be a firewall problem? Which port does SFTP use? In Server Admin I can only see an SFTP port 115, but that is called 'Simple File Transfer Protocol'. Currently 20-21-22 are open.
Thanks for your help!
PS I am still a server novice!

Thanks MrHoffman.
Does that mean I can turn ftp off and turn off ports 20-21in the firewall without prejudicing my chances to establish an sftp/ssh connection?
ssh -vvv [email protected] may provide better diagnostics, but to me as a newbie it's unfortunately difficult to understand. Apparently there is a connection established, but authentication fails. This is the relevant second half of the message, with what I hope are the relevant details:
<snip>
debug1: Host 'xxx.xxx.xxx.xxx' is known and matches the RSA host key
debug1: Found key in /Users/.../.ssh/known_hosts:5
debug2: bits set: 504/1024
debug1: sshrsaverify: signature correct
debug2: kexderivekeys
debug2: set_newkeys: mode 1
debug1: SSH2MSGNEWKEYS sent
debug1: expecting SSH2MSGNEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2MSGNEWKEYS received
debug1: SSH2MSG_SERVICEREQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2MSG_SERVICEACCEPT received
debug2: key: /Users/.../.ssh/identity (0x0)
debug2: key: /Users/.../.ssh/id_rsa (0x100123fd0)
debug2: key: /Users/.../.ssh/id_dsa (0x0)
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive
debug3: start over, passed a different list publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethodisenabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /Users/.../.ssh/identity
debug3: no such identity: /Users/.../.ssh/identity
debug1: Offering public key: /Users/.../.ssh/id_rsa
debug3: sendpubkeytest
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive
debug1: Trying private key: /Users/.../.ssh/id_dsa
debug3: no such identity: /Users/.../.ssh/id_dsa
debug2: we did not send a packet, disable method
debug3: authmethod_lookup keyboard-interactive
debug3: remaining preferred: password
debug3: authmethodisenabled keyboard-interactive
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
debug2: inputuserauth_inforeq
debug2: inputuserauth_inforeq: num_prompts 1
Password:
debug3: packet_send2: adding 32 (len 26 padlen 6 extra_pad 64)
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
debug2: inputuserauth_inforeq
debug2: inputuserauth_inforeq: num_prompts 1
Password:
debug3: packet_send2: adding 32 (len 26 padlen 6 extra_pad 64)
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
debug2: inputuserauth_inforeq
debug2: inputuserauth_inforeq: num_prompts 1
Password:
debug3: packet_send2: adding 32 (len 26 padlen 6 extra_pad 64)
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive
debug2: we did not send a packet, disable method
debug1: No more authentication methods to try.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive).
Should that tell me something?
Your help is much appreciated!
Adriaanh

Lync 2013 mobility and external access not working

Hi all.
I installed and configured Lync Server 2013 Front End and Lync Server 2013 Edge on Windows Server 2012 R2.
Internal lync clients (not mobile) can successfully connect to server and everything works fine for them. External users can connect only with manual configuration of address of external lync server in lync client, autodiscovery doesn't work.
I also installed and configured IIS ARR Reverse Proxy on Windows Server 2012 R2 using this article -
http://blogs.technet.com/b/nexthop/archive/2013/02/19/using-iis-arr-as-a-reverse-proxy-for-lync-server-2013.aspx. But it doesn't work too. When I try to connect I get 'Unable to connect to the server. Check your network connection or the server address and
try again'.
I configured dns records in the external dns zone.
For Edge:
sip.extdomain.ru – IP1
lyncwebconf.extdomain.ru – IP2
lyncav.extdomain.ru – IP3
For Reverse Proxy:
lyncdialin.extdomain.ru - IP4
lyncmeet.extdomain.ru - IP4
lyncextweb.extdomain.ru - IP4
lyncdiscover.extdomain.ru - IP4
I issued all needed certificates by the internal CA and added following alternative names.
For FE certificate:
sip.cherry.loc
lync.cherry.loc
dialin.cherry.loc
meet.cherry.loc
admin.cherry.loc
lyncdiscoverinternal.cherry.loc
lyncdiscover.cherry.loc
lyncdialin.extdomain.ru
lyncmeet.extdomain.ru
lyncextweb.extdomain.ru
lyncdiscover.extdomain.ru
For Edge external and Reverse Proxy:
lyncav.extdomain.ru
sip.extdomain.ru
lyncwebconf.extdomain.ru
lyncdialin.extdomain.ru
lyncmeet.extdomain.ru
lyncextweb.extdomain.ru
lyncdiscover.extdomain.ru
cherry.loc
The root certificate of internal CA installed on all servers and client devices.
Using Wireshark I see that Reverse Proxy communicating with FE on port 4443.
Here is an excerpt from mobile client log.
GET https://lyncdiscover.extdomain.ru/?sipuri=sip:[email protected]
Request Id: 0x6f54648
HttpHeader:Cache-Control no-cache
HttpHeader:Content-Length 1006
HttpHeader:Content-Type application/vnd.microsoft.rtc.autodiscover+xml; v=1
HttpHeader:Date Mon, 22 Sep 2014 11:17:45 GMT
HttpHeader:Expires -1
HttpHeader:Pragma no-cache
HttpHeader:Server Microsoft-IIS/8.5
HttpHeader:StatusCode 200
HttpHeader:X-AspNet-Version 4.0.30319
HttpHeader:X-Content-Type-Options nosniff
HttpHeader:X-MS-Server-Fqdn lync.cherry.loc
HttpHeader:X-Powered-By ASP.NET, ARR/2.5
Ôªø<?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-
instance" AccessLocation="External"><Root><Link token="Domain" href="https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=extdomain.ru" /><Link token="User" href="https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru"
/><Link token="Self" href="https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root?originalDomain=extdomain.ru" /><Link token="OAuth"
href="https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=extdomain.ru" /><Link token="External/XFrame" href="https://lync.cherry.loc/Autodiscover/XFrame/XFrame.html" /><Link
token="Internal/XFrame" href="https://lync.cherry.loc/Autodiscover/XFrame/XFrame.html"
/><Link token="XFrame" href="https://lync.cherry.loc/Autodiscover/XFrame/XFrame.html" /></Root></AutodiscoverResponse>
</ReceivedResponse>
2014-09-22 15:17:53.041 Lync[299:715a000] INFO TRANSPORT CUcwaAutoDiscoveryResponse.cpp/119:location value is external
2014-09-22 15:17:53.042 Lync[299:715a000] INFO TRANSPORT CUcwaAutoDiscoveryResponse.cpp/195:User url is
https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru
2014-09-22 15:17:53.042 Lync[299:715a000] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x6f54648)
2014-09-22 15:17:53.042 Lync[299:3c2a218c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2014-09-22 15:17:53.043 Lync[299:3c2a218c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/290:Received a root response
2014-09-22 15:17:53.043 Lync[299:3c2a218c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with
url = https://lyncdiscover.extdomain.ru/?sipuri=sip:[email protected], userUrl = https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru, status = S_OK (S0-0-0)
2014-09-22 15:17:53.043 Lync[299:3c2a218c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. GET-UnAuthenticatedGet(0x6f54648): S_OK (S0-0-0) (Success); Done with req.; Stopping resend timer
2014-09-22 15:17:53.044 Lync[299:3c2a218c] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(1) returning: credType (1) signInName ([email protected]) domain (cherry) username (user) password.empty() (0) certificate.isValid() (0)
privateKey.empty() (1) compatibleServiceIds(1)
2014-09-22 15:17:53.044 Lync[299:3c2a218c] INFO TRANSPORT CMetaDataManager.cpp/403:Received a request to get the meta data of type 0 for url
https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru
2014-09-22 15:17:53.044 Lync[299:3c2a218c] INFO TRANSPORT CMetaDataManager.cpp/458:Sending Unauthenticated get to get the web-ticket url
2014-09-22 15:17:53.044 Lync[299:3c2a218c] INFO TRANSPORT CTransportThread.cpp/135:Added Request() to Request Processor queue
2014-09-22 15:17:53.045 Lync[299:3c2a218c] INFO TRANSPORT CAuthenticationResolver.cpp/109:Waiting on Meta Data from https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru
2014-09-22 15:17:53.045 Lync[299:659a000] INFO TRANSPORT CTransportThread.cpp/347:Sent Request() to Request Processor
2014-09-22 15:17:53.045 Lync[299:3c2a218c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. GET-AuthenticatedUserGetRequest(0x6e83da8)
2014-09-22 15:17:53.045 Lync[299:659a000] WARNING TRANSPORT CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning NULL credential
for serviceId (4) type (1)!
2014-09-22 15:17:53.046 Lync[299:3c2a218c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1263:Submitting Authenticated AutoDiscovery request to
https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru
2014-09-22 15:17:53.046 Lync[299:659a000] INFO TRANSPORT TransportUtilityFunctions.cpp/689:<SentRequest>
GET https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru
Request Id: 0x133b6a8
HttpHeader:Accept
</SentRequest>
2014-09-22 15:17:53.046 Lync[299:659a000] INFO UTILITIES CHttpStreamPool.cpp/399:Allocating stream 0x6e73850 for url - https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user with persistent id as 16
2014-09-22 15:17:53.047 Lync[299:659a000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/435:CHttpProxyHelper::discoverProxy : No proxy found for url
https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru. Sending over direct connection.
2014-09-22 15:17:53.050 Lync[299:659a000] ERROR TRANSPORT CHttpConnection.cpp/1029:Request Type = 0x%u0x6e743a0 Error domain = kCFErrorDomainCFNetwork code = 0x2 ErrorDescription = The operation couldn‚Äôt be completed. (kCFErrorDomainCFNetwork error 2.) ErrorFailureReason
= ErrorRecoverySuggestion =
2014-09-22 15:17:53.050 Lync[299:659a000] ERROR UTILITIES CHttpConnection.cpp/958:GetAddrInfo returned error 0x8
2014-09-22 15:17:53.050 Lync[299:659a000] INFO UTILITIES CHttpStreamPool.cpp/467:Releasing stream 0x6e73850.
2014-09-22 15:17:53.050 Lync[299:659a000] INFO UTILITIES CHttpStreamPool.cpp/599:Releasing stream 0x6e73850.
2014-09-22 15:17:53.051 Lync[299:659a000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request() with status = 0x22020001
2014-09-22 15:17:53.051 Lync[299:659a000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request resulted in E_ConnectionError (E2-2-1). The retry counter is: 0
2014-09-22 15:17:53.051 Lync[299:659a000] WARNING TRANSPORT CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning NULL credential
for serviceId (4) type (1)!
2014-09-22 15:17:53.052 Lync[299:659a000] INFO TRANSPORT TransportUtilityFunctions.cpp/689:<SentRequest>
GET https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru
Request Id: 0x133b6a8
HttpHeader:Accept
</SentRequest>
2014-09-22 15:17:53.052 Lync[299:659a000] INFO UTILITIES CHttpStreamPool.cpp/399:Allocating stream 0x14102a0 for url - https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user with persistent id as 16
2014-09-22 15:17:53.053 Lync[299:659a000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/435:CHttpProxyHelper::discoverProxy : No proxy found for url
https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru. Sending over direct connection.
2014-09-22 15:17:53.056 Lync[299:659a000] ERROR TRANSPORT CHttpConnection.cpp/1029:Request Type = 0x%u0x14080f0 Error domain = kCFErrorDomainCFNetwork code =
0x2 ErrorDescription = The operation couldn‚Äôt be completed. (kCFErrorDomainCFNetwork error 2.) ErrorFailureReason = ErrorRecoverySuggestion =
2014-09-22 15:17:53.056 Lync[299:659a000] ERROR UTILITIES CHttpConnection.cpp/958:GetAddrInfo returned error 0x8
2014-09-22 15:17:53.056 Lync[299:659a000] INFO UTILITIES CHttpStreamPool.cpp/467:Releasing stream 0x14102a0.
2014-09-22 15:17:53.056 Lync[299:659a000] INFO UTILITIES CHttpStreamPool.cpp/599:Releasing stream 0x14102a0.
2014-09-22 15:17:53.057 Lync[299:659a000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request() with status = 0x22020001
2014-09-22 15:17:53.057 Lync[299:659a000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request resulted in E_ConnectionError (E2-2-1). The retry counter is: 1
2014-09-22 15:17:53.057 Lync[299:659a000] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x133b6a8)
2014-09-22 15:17:53.058 Lync[299:3c2a218c] INFO TRANSPORT CMetaDataManager.cpp/572:Received response for meta data request of type 60 with status 570556417
2014-09-22 15:17:53.058 Lync[299:3c2a218c] ERROR TRANSPORT CMetaDataManager.cpp/588:Unable to get a response to an unauthenticated get to url
https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru
2014-09-22 15:17:53.059 Lync[299:3c2a218c] INFO TRANSPORT CAuthenticationResolver.cpp/208:MetaData retrieval for url https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru completed with status 570556417
2014-09-22 15:17:53.059 Lync[299:3c2a218c] INFO TRANSPORT CAuthenticationResolver.cpp/238:Deleting 1 pended Meta data requests for url
https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru
2014-09-22 15:17:53.059 Lync[299:3c2a218c] ERROR TRANSPORT CAuthenticationResolver.cpp/334:Unable to get the meta data for server url
https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=extdomain.ru
2014-09-22 15:17:53.059 Lync[299:3c2a218c] INFO TRANSPORT CAuthenticationResolver.cpp/337:Failing request to the request manager
2014-09-22 15:17:53.060 Lync[299:3c2a218c] INFO TRANSPORT CRequestManager.cpp/284:Failing secure request UcwaAutoDiscoveryRequest with status E_ConnectionError (E2-2-1)
2014-09-22 15:17:53.060 Lync[299:3c2a218c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2014-09-22 15:17:53.060 Lync[299:3c2a218c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1358:Received autodiscovery response with status E_ConnectionError (E2-2-1)
2014-09-22 15:17:53.060 Lync[299:3c2a218c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1316:Raising Autodiscovery event with status E_ConnectionError (E2-2-1) for eventType 0
2014-09-22 15:17:53.061 Lync[299:3c2a218c] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/417:Received event for type 0 with status E_ConnectionError (E2-2-1)
2014-09-22 15:17:53.061 Lync[299:3c2a218c] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/539:Autodiscovery scheduled retrial timer. Timer 0.000000 seconds
2014-09-22 15:17:53.061 Lync[299:3c2a218c] INFO APPLICATION CAlertReporter.cpp/64:Alert received! Category 1, Type 201, level 0, error E_ConnectionError (E2-2-1), context '', hasAction=false
2014-09-22 15:17:53.061 Lync[299:3c2a218c] INFO APPLICATION CAlertReporter.cpp/117:Alert cleared of Category 1, Type 201, cleared 0 alerts
2014-09-22 15:17:53.062 Lync[299:3c2a218c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. GET-AuthenticatedUserGetRequest (0x6e83da8): E_ConnectionError (E2-2-1) (RemoteNetworkTemporaryError); Done with req.; Stopping resend
timer
2014-09-22 15:17:53.062 Lync[299:3c2a218c] INFO UI CMAlertViewController.mm/87:ObservableListItem Added event received
2014-09-22 15:17:53.062 Lync[299:3c2a218c] INFO UI CMAlertViewController.mm/97:showalert is 1
2014-09-22 15:17:53.063 Lync[299:3c2a218c] INFO UI CMConversationCommon.mm/43:not signed in
2014-09-22 15:17:53.063 Lync[299:3c2a218c] INFO UI CMConversationCommon.mm/43:not signed in
2014-09-22 15:17:53.063 Lync[299:3c2a218c] INFO UI CMConversationCommon.mm/43:not signed in
2014-09-22 15:17:53.063 Lync[299:3c2a218c] INFO UI CMConversationCommon.mm/43:not signed in
2014-09-22 15:17:53.063 Lync[299:3c2a218c] INFO UI CMConversationCommon.mm/43:not signed in
2014-09-22 15:17:53.064 Lync[299:3c2a218c] INFO UI CMNotificationManager.mm/697:desired view is alert, size 1
2014-09-22 15:17:53.064 Lync[299:3c2a218c] INFO UI CMNotificationManager.mm/737:adding the desired view
2014-09-22 15:17:53.065 Lync[299:3c2a218c] INFO UI CMNotificationManager.mm/472:reposition floating views
2014-09-22 15:17:53.065 Lync[299:3c2a218c] INFO UI CMAlertViewController.mm/104:showalert is 1
2014-09-22 15:17:53.065 Lync[299:3c2a218c] INFO UI CMAlertViewController.mm/108:showalert is 0
2014-09-22 15:17:53.066 Lync[299:3c2a218c] INFO UI CMUIUtil.mm/410:Mapping error code = 0x22020001, context = , type = 201
2014-09-22 15:17:53.066 Lync[299:3c2a218c] INFO UI CMUIUtil.mm/1708:Mapped error message is 'Unable to connect to the server. Check your network connection or the server address and try again.

Result of Lync Connectivity Analyzer.
External Auto discover service : https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root
Starting Lync server autodiscovery
Please wait; this test may take several minutes to complete...
Starting automatic discovery for secure (HTTPS) internal channel
lyncdiscoverinternal.extdomain.ru can't be resolved by the DNS server. Skipping internal discovery.
Starting automatic discovery for secure (HTTPS) external channel
Server discovery has completed for https://lyncdiscover.extdomain.ru/.
Automatic discovery results for https://lyncdiscover.extdomain.ru/
Access Location : Internal
SIP Server Internal Access : lync.cherry.loc
SIP Server External Access : sip.extdomain.ru
SIP Client Internal Access : lync.cherry.loc
SIP Client External Access : sip.extdomain.ru
Internal Auth broker service : https://lync.cherry.loc/Reach/sip.svc
External Auth broker service : https://lync.cherry.loc/Reach/sip.svc
Internal Auto discover service : https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root
External Auto discover service : https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root
Internal MCX service : https://lync.cherry.loc/Mcx/McxService.svc
External MCX service : https://lync.cherry.loc/Mcx/McxService.svc
Internal UCWA service : https://lync.cherry.loc/ucwa/v1/applications
External UCWA service : https://lync.cherry.loc/ucwa/v1/applications
Internal Webscheduler service : https://lync.cherry.loc/Scheduler
External Webscheduler service : https://lync.cherry.loc/Scheduler
Total server discovery time: 5,0 seconds
Server discovery succeeded for secure (HTTPS) external channel against URL https://lyncdiscover.extdomain.ru/
Starting automatic discovery for unsecure (HTTP) external channel
Couldn't connect to URL http://lyncdiscover.extdomain.ru/[email protected] (HTTP status code NotAcceptable)
Server discovery failed for unsecured external channel against http://lyncdiscover.extdomain.ru/
Starting the requirement tests for Lync Mobile 2013 App
Please wait; this test may take several minutes to complete...
Testing the app requirements using the following discovery response:
Access Location : Internal
SIP Server Internal Access : lync.cherry.loc
SIP Server External Access : sip.extdomain.ru
SIP Client Internal Access : lync.cherry.loc
SIP Client External Access : sip.extdomain.ru
Internal Auth broker service : https://lync.cherry.loc/Reach/sip.svc
External Auth broker service : https://lync.cherry.loc/Reach/sip.svc
Internal Auto discover service : https://lync.cherry.loc/Autodiscover/AutodiscoverService.svc/root
Internal MCX service : https://lync.cherry.loc/Mcx/McxService.svc
External MCX service : https://lync.cherry.loc/Mcx/McxService.svc
Internal UCWA service : https://lync.cherry.loc/ucwa/v1/applications
External UCWA service : https://lync.cherry.loc/ucwa/v1/applications
Internal Webscheduler service : https://lync.cherry.loc/Scheduler
External Webscheduler service : https://lync.cherry.loc/Scheduler
Starting tests for Mobility (UCWA) service
Verifying internal Ucwa service: https://lync.cherry.loc/ucwa/v1/applications
Successfully created the UCWA service
Completed tests for Mobility (UCWA) service
Verification failed for Mobility (UCWA) service. The service could not be reached from an external network.
Select All results above for more information about the failures. Detailed information can also be found in the log file.
Your deployment meets the minimum requirements for Lync Mobile 2013 App.

Lookup in MS Access not working

Similar Messages

Maybe you are looking for