Lookup server address

I enter the vCenter Server's IP address into the Lookup service address: https://10.10.15.40:7444
It re displays as https://10.10.15.40:7444/lookupservice/sdk
When I click Show Details I get this:
Certificate details
Issued to
Common Name
vCenter51.CHADD.ORG
Organization
<Not Part Of Certificate>
Organizational Unit
<Not Part Of Certificate>
Issued by
Common Name
RSA Identity and Access Toolkit Root CA
Organization
<Not Part Of Certificate>
Organizational Unit
<Not Part Of Certificate>
Validity
Issued On
22-June-2013
Expires On
01-January-2037
Fingerprints
SHA-1 Fingerprint
e0:dc:5a:e1:83:3e:20:1e:98:db:d8:a4:e1:4f:51:75:49:33:8c:e8
Extensions
Subject Alternative Names
IP address: 10.10.14.44
And Click OK
I then get this error message:
The server's certificate cannot be validated.
The name (10.10.15.40) is missing from the certificate. You cannot get access to the provided IP address or domain name.
Inspect the certificate and provide a valid IP address or domain name in the Lookup Service Address text box.
I can't seem to find any instructions on how to resolve this.
Can someone help?

Were you able to get it working? I tried the IP and the FQDN but I get this: The server's certificate cannot be validated. The name (xx.xx.x.xxx) is missing from the certificate. You cannot get access to the provided IP address or domain name. Inspect the certificate and provide a valid IP address or domain name in the Lookup Service Address text box.

Similar Messages

I am trying to add my Zimbra email to apple mail in Lion. No matter what I try i am either not able to connect to the server. I have the correct username, password, server address, act. But still no luck..Anyone got any suggestions? Im stumped

Have a Zimbra server at work for my work emails which I also use to recieve my emails on my Iphone. I have been trying to set up for email for our Zimbra server at work on my new Mac Mini's mail. I have server address, User Name, Password, and have tried all the various ways to set it up. On my Iphone 4 it is set up in the mail config as an exchange. I tried to copy the settings my iphone uses and imput them into the mail setup. Every time I have tried POP, IMAP, Exchange I get a message that it cannot connect to the server and I should check my connection to the internet. I kinda had a similar problem setting it up on my Iphone initially. I am starting to think that Apple is lacking when it comes to its native mail app. It has no problem registering my google email but for some unknown reason it wont take my work email through exchange. Really Scratching my head, any ideas?? Thanks again for taking the time to read.

I have yet to find an email server that does not work with Mail.app. Your solution will be to configure its ports and send/receive protocol according to the email server's requirements.
Try the Zimbra support forums. I found this excerpt from a relevant post:
http://www.zimbra.com/forums/users/46221-mac-mail-app-dont-work-outside-company. html
in which the following ports were suggested
ports 25, 465, and/or 487 to send mail.
port 143/993 to retrieve mail over IMAP

Wrong server address ---- needs to be changed on Apple ITUNES site

Dear Apple,
Please change our config to point to the right server for our campus.
I can not logout and login from our Apple ITUNES site because Apple has the wrong server address. Originally I signed up with www.belmont.edu but the actual ITUNES server is itunes.belmont.edu
also, if I leave open the client and select on a course the links are bad...point to the old server.
https://www.belmont.edu/cgi-bin/itunesu?destination=belmont.edu.1144766698
this I believe is not something we can fix.........
So, how do I change the server name to itunes.belmont.edu:8080/ItunesU or ItunesUPublic
thanks
Randall

Dear Apple,
Please change our config to point to the right server
for our campus.
I can not logout and login from our Apple ITUNES site
because Apple has the wrong server address.
Originally I signed up with www.belmont.edu but
the actual ITUNES server is itunes.belmont.edu
also, if I leave open the client and select on a
course the links are bad...point to the old server.
https://www.belmont.edu/cgi-bin/itunesu?destination=be
lmont.edu.1144766698
this I believe is not something we can fix.........
So, how do I change the server name to
itunes.belmont.edu:8080/ItunesU or ItunesUPublic
thanks
Randall
Looks like IIS can do redirects. Perhaps you can have your web support team do a redirect to the Apple supplied url.
Kenwrick
Powermac G5

How do I change an email server address?

To get work emails, I set up my Exchange ActiveSync months ago and it worked flawlessly. My company just changed email servers and I now get a sync error (understandable). However, when I go to account settings to try and change the server address to the new server, all I can change is the password. No matter how I get to any page where it'll supposedly let me configure the settings of a current email account, all the info but password is "grayed out" - for lack of a better term.
I know I can just create a new account with the new settings and delete the old one. My concern doing that is that all the linked contacts on my phone will unlink with the old one and I'll have to re-link them with the new one. Ugh!
Any help in this matter will be much appreciated.

@mayerpl, unfortunately there is NO way to rename the server for Exchange ActiveSync configuration. First you will have to remove the existing account and re-add it. Now here is the interesting part, HTC stores the links between contacts as additional inforamtion in the "Notes" field of your contact data (i think!). Atleast I have seen it. I think it stores the link in the account that you initially chose to link others with. So in some cases I have the link data in my exchange account, and in others I have it in my GMail.
In any case, it is highly likely that your links MAY be restored when you re-add the account. Unfortunately, I cannot guarantee it, and the only way you will find out is by doing it! But given the fact that there is no way to change the server without removing and re-adding the account, you are out of options.
If you do decide to remove and re-add, please post back and let me know if the links were reserved or you had to do them again.
Hope this helps!

Mail Server "Type" and Mail Server "Address" for Incoming & Outgoing Mail

First, the only browser I use is Mozilla's Firefox, the best browser hands down. Second, I have both a Yahoo email account and a Google "gmail" account that I use regularly (daily). I am trying to set up a mail washing program to rid myself of these ridiculous spammers & scammers, however I need to the the Incoming & Outgoing mail server "type" & "address" to do this and I seem to have guessed the yahoo settings, but I can't seem to get the Google gmail account set up properly. Yahoo settings that worked are: Server Type="POP3" and Server Address="pop.mail.yahoo.com", with advanced settings: Secure Authentication=Required, Secure Connection (SSL)=Required, Store Cached Emails=Yes, Server Port Number=995 (set), Pipelining=Enabled. The equivalent settings for the Google gmail account result in an error message = "Failed to log into POP3 Server". Of course user name & password triple checked, Type=POP3, Address=pop.mail.gmail.com, and , Address="pop.gmail.com" tried also, Port and other settings the same. Where can I find this info for both accounts? Tanks a million! -jw

Yahoo and Gmail support should be able to help you.
Not related to Firefox support, web mail doesn't use POP or SMTP protocols which is what email clients such as Thunderbird use for communicating with email servers.

Receiver File Adapter - Dynamic FTP Server Address

Hi, I would like to pass the FTP Server address to the Receiver File Adapter as an parameter. Is this possible and if so what Name Space / Parametr Names add to the Product to define these values.
Thanks
Andre

Hi Andre,
If you have your server as a part of your payload, thendynamic file server generation concept can be done is as follows.
In your server name field. just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
If you have any clarifications, do get back,
Regards,
Bhavesh

My i web version is 2.0.4. Can I publish my i web site directly to a FTP server address?

After Apple stopped hosting with Mobile Me, I moved hosting for my i web built web site to Network solutions. I was told by a Network solutions technician that I can publish an updated iweb site directly to a FTP server address. But I do not see that as an option with my 2.0.4 i web version. Can I update my
version of i web? Or do I need to purchase a later version of i web for this function?

You can open your iWeb 2 site in iWeb 3 and continue as before with the addition of FTP. However you should be able to upload with no problem in CyberDuck or Transmit - both are easy to use and reliable. Note that when you publish to a local folder you should usually upload the contents of the folder to the server, not the folder itself, unless you want the folder name (which must have no spaces in it) to appear in the URL.
Cyberduck is free (donation requested): Transmit is $34 but I think better. You will need the server address (your hosting service can tell you that), and your username and password for that service.

"Back to my Mac isn't working properly because your DNS server isn't responding. Contact your ISP for an alternate DNS server address, and enter it in Network Preferences".

Hi, i am trying to setup back to my mac at home but I get the error "Back to my Mac isn't working properly because your DNS server isn't responding. Contact your ISP for an alternate DNS server address, and enter it in Network Preferences".
There is no documentation on how to solve this anywhere.
I have an Arris router set to bridged mode which is connected to a 5th generation airport extreme. I have tried using the google dns servers instead of the one assigned by the cable company in the AE but I still get the same error.
Any help would be much appreciated
Kenneth

New to BTMM, I got stung today with the silly DNS problem message. Solution:
1) Flush DNS cache with:
dscacheutil -flushcache;sudo killall -HUP mDNSResponder
2)System preferences > iCloud > untick BTMM then tick it again. The warning should have disappeared.
Edit #1
Apologies for the noise. The warning has come back
Edit #2
Just found out that BTMM is not compatible with double NAT. That's not helpful.
http://support.apple.com/kb/TS1208

Can't delete grayed-out DNS server addresses

I want to replace two grayed-out DNS server addresses from the Network panel (under the DNS tab in "Advanced…"), to replace them with OpenDNS settings. But they can't be selected/deleted. How do I get around this problem?

That is correct - those are provided by your router and can not be deleted - you can add Open DNS servers (click the + sign) or log into the router admin page (I recommend this way) and have your router use the Open DNS servers fro everything on your network (this will change the grayed out ones)
LN

Error starting HTTP-Server: Address in use: JVM_Bind

I installed J2ee version of Oracle9iAS R2 for windows. When I start my application server, I always get the error "Error starting HTTP-Server: Address in use: JVM_Bind". In the previous version, if I met this message, I can change the port number in "http-web-site.xml", but now, no matter what port number I changed, I always get this error message.
Could anybody please help me with this issue?
Can Oracle provides a tool that can automatically free the port?
Thanks, Jessie

If you are getting this error while starting the Oracle9iAS by using the NT services or using command line (dcmctl) then there is a port conflict for the HTTP Server. You can go the EM Website and select HTTP Server ->Server properties and select the port# for the HTTP Server.
OC4J is configured to listen for AJP requests only and the ports are dynamically assigned. The port ranges can be specified : OC4J Instance -> Server Properties
regards
Debu Panda
Oracle

How to prevent changing DNS server address

I work for a public school district. We just purchased our first batch of Win 8.1 PCs, but they are not the Pro version, so there is no gpedit. I want to prevent students from accessing the TCP/IPv4 Properties dialog box in order to ensure that the
DNS server address is always obtained automatically. Can anyone tell me how to do this using regedit, or any other way? Thanks!

Easiest way is to assign these students a standard user account (without admin rights).. They cant change any system setting then.. Other than restricting privileges I don't think you have option here since you don't have group policy editor ..
There could be a possibility to do this using regedit But it is not recommended since there are no any official article for this other than below untested third party article form ehow
http://www.ehow.com/how_8110801_disable-tcpip-properties-regedit.html
Besides it could be tedious.. enabling and disabling it..

WRT54GS question.....DNS Server address?????

Someone please help,
          I had a problem with my wireless not working on my 2nd PC. I originally thought that it was because of that PC being old and possibly having some trojan horses or other virus's that i could not get off. I have since threw out that PC and bought a new notebook yesterday at BestBuy. I told the man from geeksquad that i was having a problem with my wireless at home. He said that if the notebook could not connect to the wireless to push the red reset button on the back of the router and start over with redownloading it on my PC.
        I have done that, but am stuck on step 8 of the wizard. I have the IP Address, Subnet Mask, and Gateway. It is now asking for DNS 1(DNS Server address). What is DNS & where would i find this? I've had this router for about 2 years, will there be any other important information that i may need when trying to connect my notebook through this router?
           Thanks for your advise.

I did find the DNS address's, but once i tried to finish the setup of the router it said, Unable to configure router, reset the router to factory default settings. Well in short, after some searching, i wired the PC directly to the modem. It would not connect to the internet. Did I do something or delete something I shouldn't have? Looks like it. UGH!! My notebook is working just fine connected directly to the modem, but I'm getting nothing with the PC connected to the modem or the router.
ANYONE HELP???????

How do I get a DNS server address?

How do I find my DNS Server address? I intalled my Airport to my new PC and it has a yellow light and while other wireless computers can see the network they cannot to the internet.

You cannot get a .mac address any longer - it is all now based on mobileme so xxx.me.com is the email addy domain.
To get one, you need to subscribe to the mobileme service - http://www.apple.com/mobileme/

How can I edit iCal server addresses in Mountain Lion? I keep getting an error with regards to my google calendar and I understand that the way to fix the problem is adjust the server address, but I cannot access it because the preferences are restrictive

How can I edit iCal server addresses in Mountain Lion?
I keep getting an error message with my google calendar, and I heard that if I delete the extra slash at the end of the address the problem will be fixed. But the iCal account preferences take me to system preferences > accounts every time I want to edit the account.
Does anyone know where I can edit the server address?

You should ask in the iCloud forum, this is for iMacs. https://discussions.apple.com/community/icloud/icloud_on_my_mac

How to pass KDC server address and REALM in Krb5LoginModule ??

Hi All,
I want to pass KDC server address and REALM in Krb5LoginModule() with using configuration file or command line options.
I tried with initialize method of Krb5LoginModule() with passing KDC configuration parameters in sharedState.
Map state = new HashMap();
state.put("javax.security.auth.login.name", "user");
state.put("javax.security.auth.login.password", "pass");
state.put("java.security.krb5.realm", "TEST.COM");
state.put("java.security.krb5.kdc", "kdc.test.com");
Map options = new HashMap();
options.put("debug", "true");
options.put("tryFirstPass", "true");
options.put("useTicketCache", "true");
options.put("doNotPrompt", "true");
options.put("storePass", "false");
options.put("forwardable", "true");
Krb5LoginModule login = null;
try {
login = new Krb5LoginModule();
login.initialize(new Subject(), new TextCallbackHandler(), state, options);
if(login.login()){
login.commit();
But i getting this exception:
[root@localhost TEST]# java JaasAcn1
Debug is true storeKey false useTicketCache true useKeyTab false doNotPrompt true ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is true useFirstPass is false storePass is false clearPass is false
Acquire TGT from Cache
Principal is null
null credentials from Ticket Cache
username from shared state is user
username from shared state is user
Exception in thread "main" java.lang.ClassCastException: java.lang.String
at com.sun.security.auth.module.Krb5LoginModule.promptForPass(Krb5LoginModule.java:773)
at com.sun.security.auth.module.Krb5LoginModule.attemptAuthentication(Krb5LoginModule.java:654)
at com.sun.security.auth.module.Krb5LoginModule.login(Krb5LoginModule.java:503)
at JaasAcn1.main(JaasAcn1.java:31)
Please give some pointers to solve the problem.
Thanks in advance.
Regards,
raj singh

The exception
Exception in thread "main" java.lang.ClassCastException: java.lang.String
at com.sun.security.auth.module.Krb5LoginModule.promptForPass(Krb5LoginModule.java:773)
at com.sun.security.auth.module.Krb5LoginModule.attemptAuthentication(Krb5LoginModule.java:654)
at com.sun.security.auth.module.Krb5LoginModule.login(Krb5LoginModule.java:503)
at JaasAcn1.main(JaasAcn1.java:31)clearly shows that your format for password is wrong in the shared state. String is evil, use char[] instead. Here it should be "pass".toCharArray().

Lookup server address

Similar Messages

Maybe you are looking for