Loop delay when using two VI's with picture controls simultaneously

Hey all,
I have observed an odd behavior and I'm not quite sure why it happens. I have two VI's that are mapping GPS coordinates onto XY graphs that are displayed on top of picture controls. When the maps from both of the VI's are visible on screen the loops get delayed by as much as a second, but if you just cover the map portion with another window they go back to looping at twice a second as they should. It took me a little while to figure this part out, let me tell you. There are no computing limitations that should be affecting it since my CPU is only at 10-12% and have 4GB of RAM available. I checked the GPU too just in case and it was sitting at 3% usage, so no hold up there. Anyone have any experience with something like this happening to them? It has me stumped.
I though it might have to do with how LabVIEW handled them, so I went ahead and made them into EXE's and tried it out with the same results.
Thanks in advance for any help or suggestions,
dnorman

dnorman wrote:
Is it possible to run the redraw of the picture tiles in parallel, on multiple cores, if they are going into the same control?
I doubt it. Even if the picture control wasn't pretty old (and it is), I don't know of any mechanism which will give you this level of control.
Here are potential options. I have no idea if they will help:
Instead of building separate commands, process the data in such a way that you have a single raster image (i.e. a 2D array) to place into the control. I believe this should be faster.
Use another type of display (such as a .NET indicator).
Instead of using the XY graph, overlay the data directly onto the image (there should be some graph VIs in the picture palette which might help).
Try defering panel updates before updating all the controls and undefering after. I don't think this will help, but it's probably the easiest change to make.
Try to take over the world!

Similar Messages

  • Delay when using doubletap and hold with bootcamp 5

    Hi,
    I just bought a 15" MBPro and discoverd a delay when I use doubletap and hold to scroll or to mark text or drag. Is this a know problem of the bootcamp trackpad driver?
    Hoping for answers
    Bye
    Michael

    I have the same problem, except that I'm using the Apple Trackpad in Windows 8 in Boot Camp on a 2012 iMac, so my guess is that the driver is to blame.

  • When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!

    When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!

    Hi,
       If you choose the incorrect settings for printing, yes - the print quality will be affected.
    Different papers absorb the ink differently, so you can end up with prints that are too light, too dark, or have a colour cast if you make incorrect choices in your Aperture or printer settings.

  • How to do consolidation using two chart accounts with different currencies

    Hi
    How to do consolidation using two chart accounts with different currencies and do we need to use same fiscal year variant ?
    What would be the impossible factors when we use two company codes with two chart of accounts ...
    Regards
    Kesharika

    Good Afternoon
    You need to use translationa and/or valuation
    translation takes account in foreign currency and translates to group currency
    valuation takes account in currency 1 and restates into currency 2 for a company with currency 2
    so depends on which company you are consolidating for, a company in a foreign currency in that currency or consolidating a compnay in foreign currency to parent company in another currency

  • When using two iPhones (iOS 5) on the same computer/iTunes Is there any way to choose which songs, contact info., etc. are sync'd to each device?

    When using two iPhones (iOS 5) on the same computer/iTunes Is there any way to choose which songs, contact info., etc. are sync'd to each device?

    For each iPhone...
    From the Summary tab select:  Sync only checked songs and videos.
    Under Options in the Summary tab select:  Sync with this iPhone over Wi-Fi
    If you want you can select: Manually manage music and videos.
    Select the music you want synced from your iTunes library, same with Contacts.

  • How do I use two external monitors with my laptop?

    I have a new Pavilion dm4-301 d cl Entertainment PC.   My OS is Windows 7.   I am used to using two external monitors with a docking station.   This new laptop does not have a docking station.  What do I need to get  to use two external monitors? 
    This question was solved.
    View Solution.

    Certainly not without a dock but even with, HP laptop docks pretty well limit you to one of the external monitor ports, even if there are two on the dock. We have used a device called an Atlona AT-HDPIX2 which is a usb to hdmi adapter. It provides a third monitor capability for a laptop....use the native external monitor port and the internal laptop display and then this device gives a third monitor which is full configurable from the Windows 7 display interface...clone, extend, etc. It allows full HD resolution and is responsive enough for even light gaming.  HP makes no true docking station for your laptop. 

  • How to use Two main windows with in a page in script ?

    Hi any body explain me...
    How to use Two main windows with in a page in script ?
    with  header data in one main window,
    & Item data in other main window.

    HI..,
    u need to go for <b>SPLITTING THE MAIN WINDOW</b> !!!
    Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
    Here is the procedure !!
    -->Create a page window and assign it to a page.
    Choose <b>Edit --> Main windows</b>.
    A dialog box appears.
    -->Enter values in the fields <b>Area width</b> and A<b>rea height</b> in accordance with the input guidelines for main windows.
    -->Enter values in the fields <b>Spacing</b> and Number in the <b>Horizontal group</b> if you want to use multiple columns. You can ignore the fields in the Vertical group.
    Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the <b>Horizontal and Vertical groups</b>.
    -->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:
    <b>
    Left margin of current column + Window width + Horizontal spacing = Left margin of next column</b>
    In label printing, the field Upper margin also varies from main window to main window:
    <b>
      Upper margin of current main window +  Window height + Vertical spacing = Upper margin of next main window</b>
    -->Enter a value in the field Start position.
    This is a counter. Enter a starting value which is equal to or greater than 1.
    -->The main windows are added to the list.
    -->Save your form.
    reward if it helps u...
    sai ramesh

  • Can i use two apple tvs with one itunes account?

    can i use two apple tvs with one itunes account?

    yes and you can use more then 2
    just don't give them the same name

  • Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

    Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

    The link is to a discussion started on 12/18 in the FiOS Internet forum.  Here's the link I get now, however it is different than the link I pulled a few hours ago.  If this system changes the link again, it may not work.
    http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
    You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
    Here's a link that is in the thread that gives more detail.
    https://secure.dslreports.com/faq/15984
    Good Luck!
    P.S.  "Copper Contributor" is my "rank."  gs0b is my user name.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Midi Delay when Using Rewire?

    I am experiencing really bad midi delay when using
    LE7.1 & Reason 3.0 in Rewire mode.
    Should this be happenening? I take it that I am setup properly for rewire or I would not hear anything at all. I can trigger Reason synths via LE in rewire mode but the delay is so bad that it is unplayable.I thought "latency" issues only occured when using audio. I have tried different buffer sizes to no avail.
    Any ideas?

    ok I'll answer my own post.
    Issue was a toggle box in LE prefs to control "Rewire Behaviour". Set it to "Live mode" not "Playback" mode solves this issue.

  • When using facetime having difficulty with video, sound is ok.screen says reconnecting.

    When using facetime having difficulty with video.msound is ok. Screen says reconnecting

    There have been numerous reports of FaceTime problems for the last several days and it is unclear what the cause if. Following is one of many discussions of the issue: https://discussions.apple.com/thread/6096640?tstart=120

  • LabView (8.2) hangs when using I/O operations with traditiona​l NI-DAQ 7.4.4 after aborting LabView program

    Hello!
    We have the following problem:
    LabView (8.2) hangs when using I/O operations with traditional NI-DAQ 7.4.4 after aborting LabView program
    We freshly installed LabView 8.2 (2006) and NI-DAQ 7.4.4 on a PC running Windows XP (Service Pack 3). We built a larger vi that remotely controls a traditional NI-DAQ card (AT-AO-10) on a second PC via NI-VISA 5.0.3. We were successfully running this program until a power failure caused the first computer to crash. After this crash we were unable to start the program again: LabView freezes while loading the vi. LabView itself can be started but freezes when adding I/O operations from the NI-DAQ palette to a block diagram.
    We have tried to re-install NI-DAQ 7.4.4, but it did not help. We then re-installed all NI software, but still no improvement. In the end we decided to reinstall ALL software, first Windows XP, then LabView and finally NI-DAQ 7.4.4. This worked. However, after a few days of running the program we had to abort LabView via Windows Task manager and afterward we again experienced the same problem as before: LabView freezes when loading the program.
    Obviously, we cannot afford to reinstall Windows every time. Are there any known Windows XP / NI-DAQ issues that might cause the freezing of LabView? We would be very grateful for any idea.
    Best regards,
    Matthias

    Hello Sprice,
    Browse the shipping examples according to “Directory Structure” and then select
    DAQ to find the Traditional DAQ examples. 
    There a lot of examples that are written for counters (Counter >>
    daq-stc.llb >> Count Edges (DAQ-STC).vi). 
    What kind of signals are your photons creating?  Are they TTL compatible at a certain
    frequency?  You don’t care about overwriting
    your buffer?
    Respectfully,
    Rob F
    Test Engineer
    Condition Measurements
    National Instruments

  • How to numberformat when using sql:query alogn with c:forEach JSTL tags

    Is there anyway to format the numeric values returned from the database when using <sql:query> alogn with <c:forEach> tags
    Here is my jsp code
    <sql:query..../>
    <c:forEach var="row" items="${queryResults.rows}">
    <tr>
    <td><c:out value="${row.COL1}" /></td>
    <td><c:out value="${row.COL2}" /></td>
    </tr>
    </c:forEach>
    Col1 values are numeric without any formats Eg: 1000, 10000, 1000000 etc.
    how can i format them to 1,000 , 10,1000 , 100,000 etc

    It is polite to mention what your answer was. These posts are not just here for you to ask questions, but to be used as a resource for other people to find answers. Saying "I solved it" with no details helps noone.
    I presume you discovered the JSTL <fmt:formatNumber> tag?

  • HT201178 when using apple bluetooth keyboard with iPad, hitting the enter/return key while typing in iMessage only adds another line not 'send' the message? is there a setting to change that somewhere?

    when using apple bluetooth keyboard with iPad, hitting the enter/return key while typing in iMessage only adds another line not 'send' the message? is there a setting to change that somewhere?

    Everywhere that I've checked it is not possible to do this. I would like to even do this using the vkb. I hate having to stretch my thumb all the way up just to send a message. It's messaging, not a report or email. Seems backwards. Hopefully some day Apple can add this option.

  • Can I use two separate computers with the same adobe ID.  I want to update my kobo from either unit

    Can I use two separate computers with the same adobe ID.  I want to update my kobo from either unit

    I doubt it is possible to run two instances of iTunes on the computer at the same time.  To do so would require two users to be signed in and running iTunes under each user.
    The better solution would be to either clean up and merge the two libraries or have iTunes running on a second computer.

Maybe you are looking for