Loop on Next Step programmaticaly
Hello,
Can some one help me add this action to my Teststand program? I want to be able to pass a number to a step that will allow me to loop on the Next Step with iterations equal to the passed number.
Thanks,
Ayman
Hi,
Try the attached sequence file.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
Enter Loop Count.seq 30 KB
Similar Messages
-
I'm using a Virtex-5 and the LogiCORE IP Endpoint Block Plus v1.15 for PCI Express on an OEM board.
I don't know how to get to the next step.
Specifically, the PCI Express code is accessing a small number of dual port bram blocks. I want to add my own code to use the other port of the same blocks from the FPGA fabric, not from an embedded processor. But I've never done this before and I'm looking for a starting point. The endpoint users guide doesn't go this far with its examples.
My ignorance will show here... The ucf file includes four lines such as
INST "ep/pcie_ep0/pcie_blk/pcie_mim_wrapper_i/bram_retry/generate_sdp.ram_sdp_inst" LOC = RAMB36_X7Y4 ;
and I deduce that these are locking down which bram blocks are being used.
So I figure I need four related lines in the ucf to lock down other usage I code, to use the same blocks. I don't know how to do this.
Furthermore, regarding that other usage I code, I don't know how to code that, either. For test purposes, I figure I would do some kind of clock loop of state machine to predictably alter the bram contents. Except for the bram part itself, I know how to do this. I just don't know how to code the bram access (yet).
Your assistance is greatly appreciated.No advice out there, please?
-
Hi
I am trying to make a program
During execute a measurement count the time.
If measurement time is more than 90 second proceed to the next steps (or stop the measurement)
If measurement time is less than 90 second, wait until 90 second and then proceed to next steps or stop
I appreciate deeply if some help me.What sort of measurement are you talking about? What affects the time of your measurement? The very basic description you have is of a state machine and there are numerous examples of that
1. Actually I would like measure the time of "Alignment" function done by wafer test equipment name Prober ( the model is "UF3000" made by TOKYO SEIMITSU CO., LTD.
2.. Right now the "Alignment" function is started when a GPIB command is written as "N" and wait for resposne 70 in polling.
Please refer to the attachment for Alignement function if it help you.
In the attahement
For Alignment error delay we are using =600
Alignment counter =30000
align loop cnt = 30000
This is a program wriiten by another person and he is not availabe any more. What I am trying to do is
1. During execute a "Alignment " function count the time.
2. If "Alignment " function time is more than 90 second proceed to the next steps
3. If "Alignment " function is less than 90 second, wait until 90 second and then proceed to next steps
Attachments:
Alignment function.xlsx 153 KB -
Ipod not recognized by itunes...next step for nike+
when i started to set up the nike+ i downloaded the new version of itunes then later downloaded the new software update for the ipod nano...now when i plug the ipod into the computer using the usb cord, i get a message that says this...The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software....i have attempted to install, reinstall, remove and install again, itunes and the updated software... yet it still will not recognize the ipod when it is plugged in. How do i get the ipod to be recognized and then what is my next step for using the Nike+ shoes?
ipod nanoI can't even get the tab that says Nike+ when I am trying to sync up. I can't get it to even go on to the Itunes. I can purchase music no problem
-
Issues with MacBook hard drive - next steps to take?
Hello,
I have a 15-inch MacBook Pro that I purchased in early 2010 which came with Snow Leopard, later upgraded to Mountain Lion. The other day my machine completely froze up during run-of-the-mill web browsing. When I tried to manually restart, I got stuck on the gray Apple screen with the rotating circle for over an hour. I haven't been able to boot regularly since. I tried resetting the PRAM - nothing.
I tried booting to the Recovery drive, which worked at first, but when I would run Disk Utility, the Macintosh HD drive would suddenly randomly disappear from the Disk Utility sidebar during Verify or Repair operations, and then the system would just hang/freeze. Now I can't boot into Recovery at all - it just hangs on the gray Apple screen. I tried booting from a Snow Leopard install DVD and Disk Utility does the same thing - recognizes Mac HD at first, but it disappears from Disk Utility when I try to do anything.
I tried using a Diskwarrior DVD, and Diskwarrior does not recognize the hard drive at all - it only sees the Diskwarrior DVD.
When I boot into single user mode and run fsck -yf it says everything is OK. If I press Option while booting both Mac HD and Recovery show up, but I can't get into either anymore.
I opened up my laptop to make sure everything looked okay, and aside from a little dust, the HD cable seemed secure and connected.
I have some stuff on my HD that isn't backed up that I would like to be able to recover. So what would the next step be? I'm not sure if this is a failed HD issue or a failed cable issue. Should I buy an enclosure for my HD and see if I can get it going externally? Would that be the best way to see if it is the drive and not the cable? An enclosure is cheaper than buying a new SATA cable, so I'm hoping that's where I can start.
Thanks in advance for any advice.nodel9999 wrote:
Should I buy an enclosure for my HD and see if I can get it going externally? Would that be the best way to see if it is the drive and not the cable? An enclosure is cheaper than buying a new SATA cable, so I'm hoping that's where I can start.
Yes. See if the HDD will boot the MBP via a USB connection. You should probably have an external HDD for backups or a possible replacement of your boot drive.
Ciao. -
My iPhone 4S was stolen, so until I could get or buy another, I am using my husband's old 3GS. When I connect to iTunes, the left column recognizes the phone. Then I see the Setup page. It asks whether you have a new phone to add, or restore from a previous backup of my original 4S. I click restore from back up and click continue. It restores the 3GS, but the page doesnt move on to the next step. I have restored multiple times. The page/screen stays the same. What should I do? Am I doing something wrong?
You could follow the instructions in the support document that you linked from. There is a section regarding the passcode and the inability to use it or enter it. However, you may encounter more issues since you cannot use the screen.
-
I was trying to do a favor for my gf, and I accidentily on purpose uninstalled bonjour. It has seemed to really screw up iTunes for me. What are my next steps to get this back to normal? I have downloaded and using the icloud and ios5. I have two iPhones 3gs and our iPad2. And our computer is windows xp(yes it is time for an upgrade)
Try the troubleshooting help here. http://www.apple.com/support/iphone/assistant/phone/
You may need to restore your iPhone.
If it won't restore, try here. http://support.apple.com/kb/ht1808
If nothing helps, you need to contact Verizon for information for an exchange or refund. This is a user to user forum, not Apple.
Apple's policy for a refund or exchange is within 14 days of purchase. Verizon's policy may be different.
Definitely try restoring .. hopefully you won't have to go through the hassle of an exchange. -
what is the next step after editing or triming a video?
what type of file format should be save and what to do after that?In the early days of digital video editing, an export render could take hours! Not many applications are as hard on system resources as video editing, and rendering the final edit is probably the most system intense action of all.
Head on over to the Premiere Pro Hardware forum to see what sort of computer hardware the pros use for NLE (non linear editing), or to the PPBM5 site for a better look.
PPBM5 Benchmark
Also check out the specs on the Video Guys website -
Pls help me... what is next step ?
I am trying to fix missing MSI file ? what is next step?
I got this ouput . after executingbelow command :
Cscript FindSQLInstalls.vbs %computername%_sql_install_details.txt
output.text file
Products installed on the local system
================================================================================
PRODUCT NAME : Sql Server Customer Experience Improvement Program
================================================================================
Product Code: {93998800-1608-403F-9A51-420A77D23C25}
Version : 10.50.1600.1
Most Current Install Date: 20130729
Target Install Location:
Registry Path:
HKEY_CLASSES_ROOT\Installer\Products\008899398061F304A91524A0772DC352\SourceList
Package : sqlsqm.msi
Install Source: \x86\setup\
LastUsedSource: n;1;E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\
!!!! sqlsqm.msi DOES NOT exist on the path in the path E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\ !!!!
Action needed, re-establish the path to E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\
Installer Cache File: C:\Windows\Installer\1cca5bb.msi
!!!! C:\Windows\Installer\1cca5bb.msi DOES NOT exist in the Installer cache. !!!!
Action needed, recreate or re-establish path to the directory:
E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\then rerun this script to update installer cache and results
The path on the line above must exist at the root location to resolve
this problem with your msi/msp file not being found or corrupted,
In some cases you may need to manually copy the missing file or manually
replace the problem file overwriting it is exist:
Copy "E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\sqlsqm.msi" C:\Windows\Installer\1cca5bb.msi
Replace the existing file if prompted to do so.
Sql Server Customer Experience Improvement Program Patches Installed
I got below output...now pls suggest.
=================================================
Products installed on the local system
================================================================================
PRODUCT NAME : Sql Server Customer Experience Improvement Program
================================================================================
Product Code: {93998800-1608-403F-9A51-420A77D23C25}
Version : 10.50.1600.1
Most Current Install Date: 20130729
Target Install Location:
Registry Path:
HKEY_CLASSES_ROOT\Installer\Products\008899398061F304A91524A0772DC352\SourceList
Package : sqlsqm.msi
Install Source: \x86\setup\
LastUsedSource: n;1;E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\
!!!! sqlsqm.msi DOES NOT exist on the path in the path E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\ !!!!
Action needed, re-establish the path to E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\
Installer Cache File: C:\Windows\Installer\1cca5bb.msi
!!!! C:\Windows\Installer\1cca5bb.msi DOES NOT exist in the Installer cache. !!!!
Action needed, recreate or re-establish path to the directory:
E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\then rerun this script to update installer cache and results
The path on the line above must exist at the root location to resolve
this problem with your msi/msp file not being found or corrupted,
In some cases you may need to manually copy the missing file or manually
replace the problem file overwriting it is exist:
Copy "E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\sqlsqm.msi" C:\Windows\Installer\1cca5bb.msi
Replace the existing file if prompted to do so.
Sql Server Customer Experience Improvement Program Patches Installed
No Patches Found
================================================================================
PRODUCT NAME : SQL Server 2008 R2 SP1 Full text search
================================================================================
Product Code: {F96E9800-1B92-44FA-8A30-CE1D56D77F10}
Version : 10.51.2500.0
Most Current Install Date: 20140118
Target Install Location:
Registry Path:
HKEY_CLASSES_ROOT\Installer\Products\0089E69F29B1AF44A803ECD1657DF701\SourceList
Package : sql_fulltext.msi
Install Source: \x86\setup\
LastUsedSource: n;1;E:\D_DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\
sql_fulltext.msi exists on the LastUsedSource path, no actions needed.
Installer Cache File: C:\Windows\Installer\47a921.msi
Package exists in the Installer cache, no actions needed.
Any missing packages will update automatically if needed assuming that
the LastUsedSource exists.
Should you get errors about C:\Windows\Installer\47a921.msi or E:\D_DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\sql_fulltext.msi then you
may need to manually copy the file, if file exists replace the problem file,
Copy and paste the following command line into an administrative command prompt:
Copy "E:\D_DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\sql_fulltext.msi" C:\Windows\Installer\47a921.msi
SQL Server 2008 R2 SP1 Full text search Patches Installed
Display Name: Service Pack 1 for SQL Server Database Services 2008 FullText (KB2528583)
KB Article URL: http://support.microsoft.com/?kbid=2528583
Install Date: 20140118
Uninstallable: 1
Patch Details:
HKEY_CLASSES_ROOT\Installer\Patches\45BA0AD8B5846BC488E8DD346D52F708
PackageName: sql_fulltext.msp
Patch LastUsedSource: n;1;d:\0859867ecacfd38bdc\x86\setup\
Installer Cache File Path: C:\Windows\Installer\1cca9cb.msp
Per SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Patches\45BA0AD8B5846BC488E8DD346D52F708\LocalPackage
!!!! C:\Windows\Installer\1cca9cb.msp package DOES NOT exist in the Installer cache. !!!!
Action needed, recreate or re-establish path to the directory:
d:\0859867ecacfd38bdc\x86\setup\ then rerun this script to update installer cache and results
The path on the line above must exist at the root location to resolve
this problem with your msi/msp file not being found or corrupted,
In some cases you may need to manually copy missing files or manually
replace the problem file,
Copy "d:\0859867ecacfd38bdc\x86\setup\sql_fulltext.msp" C:\Windows\Installer\1cca9cb.msp
Replace the existing file if prompted to do so.
Use the following URL to assist with downloading the patch:
http://support.microsoft.com/?kbid=2528583
-
My iphone is activated in my computer but not on iphone whats the next step
my iphone is activated in my computer but not on iphone whats the next step
It sounds to me like you either got defective parts or otherwise did not make the repair correctly. We cannot help with self-repairs here, the iPhone officially not user servicable, but you can ask for advice in the forums on ifixit.com, a site which is dedicated to those attempting their own repairs.
Regards. -
The first time I connected my new My Passport portable hard drive to my MacBook Pro, the message asking if I want to use the drive to back up with Time Machine did not appear. I would like to set it up to do this. What would my next step be?
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Open Time Machine preferences to select this drive for use as the backup drive. Turn on Time Machine. -
Once I recieve my Network Access Code(NAC) for my iPhone 5, what are the next steps I follow to unlock it from vodafone to use on another network???
I have my other nano sim ready and waiting to port my number to it, but im just waiting on vodafone to email me the NAC code, which i checked up that I was eligible for!!!Ok many thanks for telling me this BUT 1 last thing, once vodafone get back to me then is it just a matter of plugging my iphone into itunes and letting it sync? Like will a message be displayed or anything on screen letting me know or confirming that the phone has been unlocked...???
-
iphone 3gs shows activation required, hooked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?
Instructions to get the phone back working temporary.. till there is a real fix.
1. turn off the phone
2. fire up iTunes
3. press and hold the home button, plug in the cable, hold till you get to see the recovery mode
4. iTunes will the allow to choose restore the phone back to 5.0.1 ( no other choice)
5. iTunes will then ask you to choose which previous backup to would like to recover.
(note: please do not reboot your phone unless necessary, i realize at times after reboot, it goes back to sq1) -
hi there, I bought and downloaded Adobe photoshop elemts 13 today. When trying to set it up, I was prompted for the serial number which upon being entered was deemed invalid. I know the serial number is the correct one. What is the next step, how do I contact Adobe store?!?
Error "The serial number is not valid for this product" | Creative Suite
if that doesn't help, contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html -
I downloaded Mountain Lion in my i have macbook pro retina display last month. but I don't get airplay the option on my macbook. I went to display preferences, but the airplay is not available. What is the next step?
You also need:
Apple TV (2nd or 3rd generation) with software update v5.0 or later.
Maybe you are looking for
-
WRT54G network cable unplugged
I
-
Sleep and hibernation is working on Server 2012 with started hypervisor! I do not know why...
Hi, I enabled Hyper-V role in the Microsoft Windows Server 2012 on testing computer (PC with i7 CPU and 16GB RAM). I found very strange behavior. The sleep mode was enabled and after command “powercfg /hibernation on” the hibernation is also working.
-
Hi, service purchase order created & placed to(X) vendor for service.We have made 50% Down payment for that vendor(X). The user requirement is that if he creates one more service purchase order against the same vendor(x) system should give some messa
-
Why am i getting icloud keychain verification codes when i didn't request any?
I just started getting multiple icloud keychaing verification codes and I don't have keychain enabled on any device that I know of. why am i getting these sent to me via txt?
-
Hi , I have a requirement where somewhere around 200 users may be logged into the portal at the same time . They will be accessing R3 transactions through portal using SAP transaction iviews . What server sizing would you suggest for such a scenari