Loop Problems. There are no Apple Loops installed on your System.

When I first open Garage Band I get a message that says
"There are no Apple Loops installed on your System. Please reinstall the Apple Loop Package"
Where is the Loop Package, how do I reinstall it, and overall.. how do I fix this problem?

WH,
I did and with no luck. But I was able to solve the problem.
What I found out was that the folder under the main library has the wrong rights which wouldn't allow the index files to be updated.
So, I change the Audio folder and all enclosed folders to allow All Others the ability to Read/Write. I deleted the files out of the Apple Loops Index and launched GB. I dropped a loop onto the loop browser and the index was rebuilt.
Eventually I copied the Jam Pack folders over to the Macintosh HD > Library > Audio > Apple Loops > Apple folder. Then dopped another loop on the loop browser for the index to be rebuilt again. Doing this allowed all users on this computer to have access to the loops.
Race.
Message was edited by: Race Proffitt

Similar Messages

When I open Garage Band '09 it says" No Apple Loops found; There are no Apple Loops installed on your System. Please reinstall the Apple Loop Package".

I have garage band '09 on my mac. When I open garage band a little notice pops up saying "No Apple Loops found; There are no Apple Loops installed on your System. Please reinstall the Apple Loop Package" I have followed the instructions on the apple web page and it didn't work. I looked in all of the locations on my mac and all of the folders that should contain apple loops are empty. Is there a way I can redownload the apple loops to my mac without buying garage band '11 or one of the jam packs????????????????

swimmerT wrote:
I have followed the instructions on the apple web page and it didn't work.
without knowing what you did, it's impossible to guess what might be wrong
swimmerT wrote:
Is there a way I can redownload the apple loops to my mac
no
swimmerT wrote:
without buying garage band '11 or one of the jam packs????????????????
yes!!!!!!!!!!!!!!!!!!!!! reinstall GB 09:
http://www.bulletsandbones.com/GB/GBFAQ.html#reinstallgb
(Let the page FULLY load. The link to your answer is at the top of your screen)

ThinkVantage System Update - "There are no applicable packages found for your system"

QuestionWhen running TVSU, I am getting a system notification of "There are no applicable packages found for your system"
AnswerThis issue has occured at various times, and may more commonly occur when TVSU updates itself. At the time this article was originally written, the symptom was noted by some customers after updating from version 4.01.0010.
After updating System Update, if no packages are found for your system, please try the following to uninstall and manually reinstall the current version of system update.
Click Start
Click Control Panel
Click Programs and Features
Select System Update
Click Uninstall
Reboot
Download latest version of ThinkVantage System Update
Install it and reboot
Run ThinkVantage System Update and the list of updated drives will now populate correctly.

There are a few comments here that have come in over 3 years...
1) Please update to the latest version of TVSU appropriate for your version of operating system. TVSU should update itself, but please check the reported version when TVSU starts up against the most recent version available to download on support.lenovo.com. Uninstall, download the newer version, and re-install if it does not auto update and you have confirmed a newer version.
2) From time to time, there are issues with the TVSU catalog and updates may not be reported as available for a specific system. Lenovo software teams do their best to ensure the update catalog is current for all supported models, but in the event that you find no updates for your system and believe this is in error, please manually check several of the principle driver versions in device manager and compare with the versions available for manual download on the support site for your model. If later versions of drivers and BIOS are available on the support site, but not made available through TVSU, then use this feedback link to notify the e-support team so they may investigate.
http://support.lenovo.com/us/en/websitefeedback
3) If you have recently changed the system board in your system, or service has changed the board, and TVSU can no longer find updates, or reports an error detecting your system, please reboot and press F1 to enter BIOS. (Note, you may need to shut and restart to enter BIOS). In BIOS, check that the system model type and serial number are correctly displayed. These should match the type and serial numbers on the sticker on the bottom of your system. TVSU identifies correct updates by checking these values in BIOS. When a system board is replaced, there is a service proceedure to update the type and serial number values in BIOS to match that of the new system. If these are shown as blank, this was not performed, and is the reason TVSU is not detecting updates. Please contact Lenovo service if this is the case.

"There are no Loops Installed on your System." Missing Loops?

Hi everyone. I just purchased my very first Mac today and so far the experience has been great with the exception of two things. One of the things being that I don't seem to have loops on my Mac for GarageBand. When I open the Loop Browser, it simply says "There are no loops installed on your system," and gives me an empty loop browser. Did I miss something? Was I supposed to install the loops off of a disc or something? I would've assumed that the loops would've already been on my Mac, but please inform me if this is not true. Also, I still have all the discs that I got with my Mac since I just got it earlier today, so if anyone knows what discs the loops are on or any other way to get GarageBand Loops, please let me know. I'd appreciate your help very much. Thanks.
Black MacBook 1GB RAM, 2.16GHz Intel Core 2 Duo, 160GB Hard drive Mac OS X (10.4.9)

Good.
Do a search for this folder: "Apple Loops Index".
There will likely be more than one, although only one folder probably has all your Indexed Loops.
So, when you find the one with the "Search Index..." files, delete them.
Then, open a project in GarageBand, open the Loops Browser, and drag that Loops folder onto the Loops Browser.
Wait for it to index them, and you should be good to go.
Good luck,
WH [:c)~

I have GarageBand for iPad 2 and noticed that there are far fewer loops for iPad than for apple laptops. Is there a library available of apple loops? I haven't been able to find any if there are. Any help would be greatly appreciated.

I have GarageBand for iPad 2 and noticed that there are far fewer loops for iPad than for apple laptops. Is there a library available of apple loops? I haven't been able to find any if there are. Any help would be greatly appreciated.

Update: An Apple rep called me today to update the status of my return. I was told that the replacements for the BLACK iPad 2's was still another 3 weeks out (at least) so they offered me a brand new WHITE 16GB iPad 2. I could have that or continue waiting. I opted to go ahead and accept the offer of a new white one. Worst case scenario if I don't like the white one I have buddy that just bought a 16GB black one that he would be willing to swap it.

HT201496 Hai there. I am facing trouble with my garageband apple loops.i don't see apple loops in my browser since quite some time i don't know what has happened to it and how it happened . i just wanted to learn some of basic things about music.can you h

Hai there. i am having a trouble with the garage band apple loops to get into my macbook pro. . i had it some time back and i dont know where it has gone and how it get it back. is there anyone to help me to get the loops back into the browser . i will be grateful to you if some one can help me with it/ thanks.

First check, if you do not accidentally have hidden or filtered your loops:
Uncheck the "Filter for more relevant results" option in the Audio tab of the GarageBand Preferences.
And the drop down menu on top of the Loop Browser should be set to "Loops", not to some Jam Pack or other collection.
If you still don't see any loops, check if you have set your project to a special signature, like 9/8, for that no standard loops do exist.
Then check, if any loops actually are installed in your system Library: Depending on your GarageBand version you should find the standard loops in the Audio folder of your system Library (Application Support > GarageBand):
Your System Drive > Library > Audio > Apple Loops
If the Loops are installed, but GarageBand does not show them, you need to rebuild your Apple Loops Index: See the FAQ for how to do it:
Re-Index GarageBand's Loops
This requires two steps:
erase the old Apple Loops Index by deleting everything in
Your System Drive > Library > Audio > Apple Loops Index
and then rebuilding the Loops Index by dragging the folder containing all of your loops onto the Loop Browser in GarageBand.
If no Loops are installed in your Library, you will have to restore them from your Backup.
Regards
Léonie

GB won't open- This is what I get... Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser

Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser. Then I get this message...
Instrument Library Invalid
GarageBand Ecpects a valid instrument foledr in /Libraty/Application Support/GarageBand
Please choose a valid instrument Library folder or quit and re-install GB
Any solutions?

Is this a new installation of GarageBand or has it worked before on the same computer?
Or have you transferrred your GarageBand from a different computer?
The error message is saying, that your GarageBand installation is incomplete. There are essential foldrs missing in your system library.
Check, if indeed both folders are missing or if only the permissions are set incorrectly.
Your system library (the folder "System" directly on your system drive) should have the following folders inside the folder "Audio", and they need to be readable by the system and by administrators.
And in the folder /Library/Application Support there should be the Instrument Library.
If these folders do not exist (or no longer exist), restore them from your backup- If your GarageBand version is a new installation, the application may not hve been downloaded or installed completely, then reinstall GarageBand.
What is your GarageBAnd version, and how did you install it originally?
Regards
Léonie

How does AppleCare work if there are no Apple stores in the area?

Asking this for my mother who just purchased an iPhone 6 based on my suggestion that it was the easiest to learn coming from a flip phone.
She leaves in Ocala, FL and there are no Apple retail stores in the vicinity. When I looked up for 'authorized repair locations' the closest was over 45 minutes away in Gainesville, FL. Is there a way to purchase AppleCare+ and have local support within the greater Ocala, FL area... via Best Buy (where we got the phone), Verizon Wireless (our service) or any other repair services? Otherwise I may need to consider SquareTrade. Verizon and Best Buy insurance is very expensive for a 2 year plan.
I just want something where she will not be without a phone for days if it needs to be repaired.
Thanks for your reply,
Don

Databaseninja wrote:
Asking this for my mother who just purchased an iPhone 6 based on my suggestion that it was the easiest to learn coming from a flip phone.
She leaves in Ocala, FL and there are no Apple retail stores in the vicinity. When I looked up for 'authorized repair locations' the closest was over 45 minutes away in Gainesville, FL. Is there a way to purchase AppleCare+ and have local support within the greater Ocala, FL area... via Best Buy (where we got the phone), Verizon Wireless (our service) or any other repair services? Otherwise I may need to consider SquareTrade. Verizon and Best Buy insurance is very expensive for a 2 year plan.
I just want something where she will not be without a phone for days if it needs to be repaired.
Thanks for your reply,
Don
Another thing to consider. Square Trade, and the insurance you are talking about are different than Apple Care +. Apple Care + is an extension of the manufacturer's warranty. Square Trade and the Verizon and Best Buy insurance are just that, to cover the device if lost or stolen. That does not cover warranty work. Only Apple warranties the device. You are actually lucky there is an Apple Store that close. My closest one is 2 hours away. Others are less fortunate than that. But, as rbrylawski indicated, you can call Apple Care and ship the device to Apple for warranty service if necessary. The easiest way to prevent her from being without a phone is to take it to the store, but you can also ask for Apple Care to ship a phone to her before she sends hers back, but that requires a credit card and they put a hold for the cost of the phone until they receive the phone back.

Stack.xml There are no stack independent files in your selection error

Hi experts,
I am trying to do EHP upgrade from SR3 to EHP 6 , while generating stack.xml file using MOPZ I am facing the problem as like...
" There are no stack independent files in your selection "
Please find the attachment and help us if any one aware of it.
Note: Windows 2008 on Oracle 10 .2

Hi
Manu Mohandas
Thanks for your reply,
But We have selected those DB dependent Kernel files and DB independent kernel files in the previous step.
As you said we have clicked the " continue" .
PFA of next screen It is giving the same as previous ...
CHEERS
HSK

Build 10049 breaks openvpn: "There are no TAP-Windows adapters on this system"

openvpn is unable to find the (existing) TAP network device after an upgrade from build 10041. uninstalling and reinstalling openvpn and/or the tap device does not help.
error log:
Tue Mar 31 09:49:36 2015 OpenVPN 2.3.6 i686-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [IPv6] built on Mar 19 2015
Tue Mar 31 09:49:36 2015 library versions: OpenSSL 1.0.1m 19 Mar 2015, LZO 2.08
Enter Management Password:
Tue Mar 31 09:49:37 2015 Control Channel Authentication: using 'redacted-tls.key' as a OpenVPN static key file
Tue Mar 31 09:49:37 2015 UDPv4 link local (bound): [undef]
Tue Mar 31 09:49:37 2015 UDPv4 link remote: [AF_INET]123.123.123.123:1194
Tue Mar 31 09:49:38 2015 [vpn.mycompany.com] Peer Connection Initiated with [AF_INET]123.123.123.123:1194
Tue Mar 31 09:49:40 2015 There are no TAP-Windows adapters on this system. You should be able to create a TAP-Windows adapter by going to Start -> All Programs -> TAP-Windows -> Utilities -> Add a new TAP-Windows virtual ethernet adapter.
Tue Mar 31 09:49:40 2015 Exiting due to fatal error
the TAP adapter does indeed exist.
had no problem using openvpn in any of the previous builds. the problem also exists in other (openvpn) clients that make use of the TAP driver, for example securepoint's client.

openvpn is unable to find the (existing) TAP network device after an upgrade from build 10041. uninstalling and reinstalling openvpn and/or the tap device does not help.
error log:
Tue Mar 31 09:49:36 2015 OpenVPN 2.3.6 i686-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [IPv6] built on Mar 19 2015
Tue Mar 31 09:49:36 2015 library versions: OpenSSL 1.0.1m 19 Mar 2015, LZO 2.08
Enter Management Password:
Tue Mar 31 09:49:37 2015 Control Channel Authentication: using 'redacted-tls.key' as a OpenVPN static key file
Tue Mar 31 09:49:37 2015 UDPv4 link local (bound): [undef]
Tue Mar 31 09:49:37 2015 UDPv4 link remote: [AF_INET]123.123.123.123:1194
Tue Mar 31 09:49:38 2015 [vpn.mycompany.com] Peer Connection Initiated with [AF_INET]123.123.123.123:1194
Tue Mar 31 09:49:40 2015 There are no TAP-Windows adapters on this system. You should be able to create a TAP-Windows adapter by going to Start -> All Programs -> TAP-Windows -> Utilities -> Add a new TAP-Windows virtual ethernet adapter.
Tue Mar 31 09:49:40 2015 Exiting due to fatal error
the TAP adapter does indeed exist.
had no problem using openvpn in any of the previous builds. the problem also exists in other (openvpn) clients that make use of the TAP driver, for example securepoint's client.
I have exactly the same issue with Open VPN... :(...

Cannot find Microsoft Word installed on your system

Hi,
Wonder if anyone can help...
I just tried to generate my printed documentation in RoboHelp
and everytime I try I get the error message 'Cannot find Microsoft
Word installed on your system'.
It is installed, and when I go to Tools > Options >
Tool Locations you can see it is pointing to the right location
(C:\Program Files\Microsoft Office\Office12\WINWORD.EXE).
This is the first project I have done with RoboHelp 7.0 on
Vista- does anyone have any ideas?
Thanks

First, thanks to Wkugelman for this new initiative. I think
we are a big step nearer, but not quite there yet.
Nitabeck wrote
quote:
If I manually type in the path to the shortcut, RoboHelp
tells me the path is invalid.
This happens to me on XP too, so there must be some other
problem. I do have adminsistrator rights on this PC. Here's what I
do
1) Find WINWORD.EXE and create a shortcut to it on my
desktop. I rename it to WINWORD.EXE
2) In RH. Menu:Tools > Options > Tab:Tool Locations
> Pane: HTML Editors
3) Select the line Word 2003 and click the Edit... button to
change the path
4) I get a popup called HTML Editor with Word 2003 grayed out
above, and a path selector text box below.
5) Now it doesn't matter whether I use the path browser icon
and navigate to my new shortcut, or whether I enter the path
manually. When I click OK I get a popup saying the path is invalid
or I return to the HTML Editor popup but the path to Word has not
changed (it remains C:\Program Files\Microsoft
Office\OFFICE11\WINWORD.EXE ).
Notes: It doesn't matter whether the path is on C:\ where
Program Files (with Office11 And Adobe Robohelp 7 reside), or on
D:\ where my "My Documents" directory is with subdirectory My
Robohelp projects.
I have also played around with the two radio buttons at the
bottom of the Tool Locations tab:
* Auto-select editor and
* Use default editor
But to no avail. Can someone explain what these options
change?
If protections on the OFFICE11 directory or Winword
executable are the problem, wouldn't it be simpler to loosen these
so that RH can use it?

Cannot find Microsoft Word Installed on your system - RH10 - a solution

I started receiving the error "Cannot find Microsoft Word Installed on your system" whenever I tried to generate printed documentation from RoboHelp 10. This occurred after I installed Open Office 3.4.1.
Clicking the "Printed Documentation" option in the SSL pod generated the error. However, right-clicking on the "Printed Documentation" option, selecting "Properties", then clicking "Save and Generate" did work. Go figure.
I am using Word 2007.
All of these suggested solutions to resolve the problem didn't work, unfortunately.
Uninstalling and reinstalling Open Office with the correct option selected for file associations as suggested here:
http://www.grainge.org/pages/authoring/printing/print_issues.htm#other_issues
Tried reinstalling the MPJ2DOC.DLL as suggested here:
http://helpx.adobe.com/robohelp/kb/error-cannot-find-microsoft-word.html
Tried all the suggestions here:
http://forums.adobe.com/message/4173839
Spent 2 hours with Adobe support (they were helpful but could not fix the problem) uninstalling and reinstalling RoboHelp, including reinstalling and registering the dll again.
Finally I fixed the problem by following the simple solution here. I found that the problem was that the Word file associations were corrupt and you simply need to reregister word.
http://www.word.mvps.org/FAQs/AppErr...gisterWord.htm
Here's the solution in case the link does not work:
How to re-register Word when problems crop up opening files
Article contributed by Cindy Meister
If you find that Word files do not open in the desired version of Word when you double-click them in Windows Explorer, or that when opening them from the Desktop or Explorer, a series of messages appear claiming that the file cannot be opened, such as:
“Cannot open C:\My”
“Cannot open "Documents\The”
“Cannot open "Test.doc"”
.. you need to re-register Word. To fix the problem:
Word 97 and above
Click Start | Run (bottom- left corner of your screen).
In the “Open“ box, type:
winword /rand press Enter. Note that there is a space before the forward slash
Word 95
Locate the file winword.reg on your system
Double-click it to re-register Word
Hope this helps anyone else who has struck this problem.
Cheers Mark

I am not surprised that the DLL is crashing your system. If you read the Knowledge Base item for that file it specifically refers to RoboHelp 9. Your first step is to restore the correct DLL for Rh10. I hope you backed it up.
What is your operating system?
Have you tried uninstalling and reinstalling?
Is your Normal.dot file on your local drive or on a network.
Are you generating the printed document to your local drive?
At what point does the generation crash?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

While installing Acrobat XI Pro, the installation automatically rolls back and I get the message "The wizard was interrupted before Adobe Acrobat XI Pro (11.0.07) could be completely installed. Your system has not been modified. To complete installation a

While installing Acrobat XI Pro, the installation automatically rolls back and I get the message "The wizard was interrupted before Adobe Acrobat XI Pro (11.0.07) could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again." How to resolve it.
How do I modify the system.

Hi Rgardezi,
The only reason why Acrobat installation fails and throw this error message is when there are some services running in the background causing the installer not to complete the installation. My take is try the following steps and suggest if you were able to install the products or not :
1) Navigate to control panel and confirm that there is no line Item that talks about Acrobat. If you see Acrobat XI listed there, please remove them.
2) Perform a selective Start up using the steps mentioned in this link.
Please suggest if the above mentioned steps were able to resolve the query for you or not.
Cheers,
Kartikay Sharma

Need help: Cannot find Microsoft Word installed on your system.

I am having issues trying to generate a pdf from a robohelp 7 html project. Whenever I try to generate a pdf I get the error "Cannot find Microsoft Word installed on your system."
I have tried to uninstall both Office (2003) and robohelp, re-installing office first and then robohelp, but it doesn't help. Can anyone shed some light on this issue?

Colum,
Thanks for the reply, but it's Microsoft Office, not Open Office.
I have read many threads here and tried most of the suggestions, up to and including:
Uninstall/Reinstall of Office and RH 7
Adjusting Macro security
comparing registry entries
There are others but I can't think of them all right now. Point being, nothing has worked thus far. I must admit this is fairly frustrating but I haven't given up yet. Any more suggestions are welcome, and I will review the link you gave me just to make sure I cover all my bases.

Cannot find the HTML browser installed on your system

Guys forgive me if you have answered this before, I have
tried a search of previous issues TNA.
I have reloaded R/H 6 to my laptop (with full admin rights
set against my user name) everything except works except generating
in Microsoft HTML Help I get the following error when I click
Finish: cannot find the HTML browser installed on your system
Any ideas welcome. With thanks, J

Hi JayRichard
You might try the following.
Inside RoboHelp HTML, click Tools > Options...
Click the Tool Locations tab
At the bottom of the dialog should be an area listing
"Browser paths". You should see one for Internet Explorer and one
for Netscape. Try clicking the little file folder icon to the right
of one of them. (Whichever browser you are using)
Navigate to and select the executable file for the browser.
Mine for Internet Explorer says:
D:\Program Files\...\iexplore.exe (The full path is
D:\Program Files\Internet Explorer\iexplore.exe
Dismiss the dialogs by clicking the Open and OK buttons until
they are all gone.
Keep us posted on whether this helps... Rick

Loop Problems. There are no Apple Loops installed on your System.

Similar Messages

Maybe you are looking for