Loop when loading after installing leopard

After installing leopard, my computer is not loading properly.
I can log in, the dock opens but then a window pops up saying "None of your preferred networks are available", displaying other networks; however the spinning coloured wheel appears and I am unable to advance from here.
The dock however works OK, and I can open dashboard (but cant use widgets). Finder is also not yet open, but if I click on it on the dock its light turns on (it "opens") and the top bar opens up, showing standard menu options and the spotlight icon. However after this it also freezes (spinning wheel again).
I suspect there is a problem (loop?) loading AirPort, which is blocking other apps and Finder. The computer gets stuck. I already tried "fix permissions" and "fix disc" using utilities, and I tried logging in safe mode, but it freezes immediately after the dock shows, not even showing the top bar, even before the point it freezes in normal mode.
Does anyone know how I can get around this?
(I can also access my HD using networking if I am connected by cable).

I am having the exact same issue on my G5. It's been sitting there hung up on "none of your preferred networks are available" for 30 minutes now. I repaired permissions before installing, and I'm able to boot from the CD and re-check them - everything's OK. Anyone have any suggestions?

Similar Messages

After installing Leopard, my G4 will no longer boot in OS 9.22. (Classic still works, but I need it to boot in OS 9.) Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? What can I do to fix it?

After installing Leopard, my G4 will no longer boot in OS 9.22.
(Classic still works, but I need it to boot in OS 9.)
Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? (And what can I do to fix it?)
Details:
G4 Gigabit Ethernet
Boot ROM version: 4.2.8fl
Accelerator card added: 1.6 MHz
1.5 Gig Ram
I have erased the partition that had Leopard installed on it.
I zapped the pram.
In Open Firmware, I "reset-nvram", and then "reset-all"
I tried to reinstall G4 FW Update 4.2.8, but that must be done when booted from OS 9, and of course, that's the problem: it won't boot into 9.
I tried restarting from 9.2.1 DVD.
I tried restarting from an external firewire drive containing OS 9.2.2.
I tried moving a fresh OS 9.2.2 system folder into an empty partition on an internal hard drive. (Partition was created WITH OS 9 drivers installed.)
All attempts to boot into OS 9 give me the same results - grey screen - no spinning beach ball, no icons or logos - just a blank grey screen.
This machine still works fine in OS 10.3 and 10.4, and it worked fine for many years booting into OS 9, until I installed Leopard, and I haven't been able to boot into OS 9 since then, although I have done considerable research online and tried many things.
I have since learned that this machine does not support Leopard - 10.5. Fine, but how did it break 9.2.2?
Any help greatly appreciated.

Thanks for checking in, BDAQua.
Problem solved.
In the docs that came with my Powerlogix accelerator card, I found this sentence buried:
"If you reset the PRAM, the NVRAM code for OS9 compatibility is cleared, so you will have to boot from the Firmawre Update CD and perform this process again in order to boot in OS9."
The "process" it's referring to is the process of setting up the NVRAM for booting into OS9 from the CD.
Fortunately, I was able to find the disk, and it worked as expected. I can now, once again boot into OS9.
Conclusion: My (unadvised) attempt to load Leopard on this old machine apparently reset the PRAM on the accelerator card and cleared the NVRAM code for OS9 boot. Although I did attempt to reset the NVRAM via Open Firmware, it did not reset it on the accelerator card.
So, thank you BDAQua, for your "Ah yes" . . . that's all I needed to steer me in the right direction.
Gratefully,
tupester

After installing Leopard I cant

After installing Leopard I cant upload pictures through myspace I have even tryed firefox and it doesnt work I also you safari . I called apple and they said something about a plug in issue. Has anyone else had this problem.
Just wondering?

I had installed Snow Leopard on my iMac 24" 2.4GHZ Intel machine. Previously everything had been working fine prior to my install. Coincidence being what it is, after I installed SL from DVD my menu bar items in the top right were not showing up and then my CD/DVD drive was not working. Would say that it can't read the inserted disc and my options were to choose ignore and eject.
I chose Ignore and went to Disk Utility and it could see the blank DVD I had inserted. But I could not burn the disc.
*Due to me having two issues at the same time, this complicates my ability to pinpoint what the solution was, but here's what I did and now everything is fine*
Before everything granular, I tried installing from SL disc again, in case that had been an issue...when that didn't work then...
First I removed a series of suggested .plist files that pertain to the menu bar, finder, clock, etc... That was for my menu bar issue (which didn't fix it by the way)
I then used disk utility from the SL DVD using that as start up disc, yes it loads fine. Verified and Repaired Disc permissions and drive. No issues.
I ran software update and installed 10.6.1 (still no fix to either problem)
I ran firmware update using the hold power button process during startup
(still no fix to either problem)
I reset the PRAM using boot up key sequence...still appeared to be no fix.
Then one more complete shut down and reboot...VOILA! *EVERYTHING REPAIRED*!!!
So I have no idea WHAT did it, or WHY. However, that process now has me burning DVDs successfully and I have all my menu items back.
I know it's not the most helpful response, but I can tell you everything works fine now.

My Creative Cloud Desktop app closes suddenly when loads palicativos installed. I can not update my apps. What i do?

My Creative Cloud Desktop app closes suddenly when loads palicativos installed. I can not update my apps. Already reinstalled the desktop app CC often using adobe cc cleaner. It does not uninstall the normal way. What do I do? I can not contact anyone here in Brazil. I've tried phone, facebook, email and chat.

Hi etges,
Kindly check the below mentioned link and revert if problem persists.
Link: CC applications crashes immediately after launch
Thanks,
Atul Saini

My external drive went dead after installing Leopard

Hey guys
I'm very bummed out, my external HD went dead after installing Leopard on my Dual 2.3 GHz PowerPC G5. It was working perfectly fine before, had not a single problem with it but now, I've just lost all my work. I tried Disk Utility from the disc with no luck, it gave tons of errors and it say it couldn't be repaired. Now, it doesn't show up at all. Every single time I connect it I get a message saying the disk I inserted is not readable by the computer. This is a 200GB Maxtor external drive. Is there anything I can do to fix it? Any hardcore Software to retrieve my files? I'd appreciate if anyone can help me with this.
Thank you in advance

Movies are currently a one time download. Because of this, it is your responsibility to back them up so when something like this happens, you can simply copy them over the new drive.
You can't download them again with purchasing once again.

Error Messages After Installing Leopard 2

After installing Leopard from the Install DVD, I used Software Update to update to 10.5.1, and updated QuickTime, etc. I also ran Cocktail, the Leopard edition. The Hard Drive checked out OK. When I ran Repair Permissions in Disk Utility, I got a number of error messages. One set starts like this: "Warning SUID file "System/Library/Private Frameworks/DiskManagement.framework/Versions/A/Resources/DiskManagementTool" has been modified and will not be repaired."
There are a number of messages like this. What shall I do?

Download and install this update, even though you've already updated.
(26492)

Finder not working after installing Leopard!!!

Hi everyone.
I'm getting a strange Finder behavior on my Intel iMac (not the newest version) after installing Leopard. The thing is, after instalation, when I start the computer, the top bar on the screen starts blinking, and there's no way to open a Finder window. And it stays like that forever! I tried to open Finder from the Dock, but the blue dot of the active programs blinks 3 or 4 times and then disapears. Plus, the only way to access the Apple logo on the corner to switch the computer off or restart it, is by opening one other program from the dock (in this case I have Safari running), because this way the top bar stops blinking.
So, I thought I should try to update Leopard to 10.5.1, and this could solve the problem. But no. It searches for new software updates, tells me that there are new updates, but I cannot see them nor install them!
This is really weird and annoying!
Anyone had this problem? Please, help me.
P.S.: Yes, I've tryed a second install of Leopard. Same thing!

anamorphis wrote:
Hi everyone.
I'm getting a strange Finder behavior on my Intel iMac (not the newest version) after installing Leopard. The thing is, after instalation, when I start the computer, the top bar on the screen starts blinking, and there's no way to open a Finder window. And it stays like that forever! I tried to open Finder from the Dock, but the blue dot of the active programs blinks 3 or 4 times and then disapears. Plus, the only way to access the Apple logo on the corner to switch the computer off or restart it, is by opening one other program from the dock (in this case I have Safari running), because this way the top bar stops blinking.
So, I thought I should try to update Leopard to 10.5.1, and this could solve the problem. But no. It searches for new software updates, tells me that there are new updates, but I cannot see them nor install them!
This is really weird and annoying!
Anyone had this problem? Please, help me.
P.S.: Yes, I've tryed a second install of Leopard. Same thing!
Do NOT install any updates until you resolve the problem, which is unrelated to any updates. Updating a computer that is not working correctly will only make the problems worse, never better.
If this is the second install, was it on an erased HD or did you import your previous programs, etc?
It sounds like you might have some errant 3rd party software running.
Did you run a disk check and file permission verify/repair before installing?
Check your startup program window and remove everything there. Write them down so you can put them back later.

Logging out behaviour after installing leopard

I believe that before I installed the Leopard upgrade when I would log out of one account on my machine and nothing was running, the system would just log off the account without prompting me and return the to the login screen.
After installing Leopard it seems to me that whether or not something is running the OS prompts me if I want to close all applications and continue logging out.
Is this a new behaviour of Leopard or is there something running in the background that I don't know about?
thanks

To be honest, I can't be completely certain how things were in Tiger since I have always used ⌥⇧⌘Q to log out immediately (assuming there aren't any unsaved changes), but the existence of both options suggests to me that the dialogue was always there. Maybe the wording was different, but I don't think the behaviour has changed...

Question about smc fancontrol after installing Leopard... please help

hi,, i recently had my macbook pro a clean install leopard,.. everything is going fine afterwards until i installed smc fancontrol, smc fancontrol is working fine, but my problem is, i forgot to set the default fan speed on the smc fancontrol which is 2000rpm before i did the clean install, the fan speed was 2500rpm when i clean installed leopard, forgetting to set the default 2000 rpm back,. and now after i installed leopard, and then i installed back the smc fancontrol, the default now is 2500rpm! i cannot set it back to the default, which is 2000rpm, when i tried smc fancontrol keeps telling me that it FELL SHORT OF MINIMUM, which it thinks the default rpm is 2500, how can i get it back to the real default rpm of macbook pro which is 2000rpm? i'm afraid that constantly running my macbook pro forever to 2500rpm will cause the wear and tear of my macbook pro's fans , please help me, i really don't know what i'll do here....

hi, thanks, btw, what would i look for in the activity monitor after i closed the smc fancontrol?
Check all your processes under the CPU tab. They should all be very low at idle--like right after you boot. If you have some process running like 30% for example, that could cause the fans to run faster.
should i check in the activity monitor if the smcfancontrol still runs after i closed it? i
It shouldn't show up in their after you close it.
-Bmer
Mac Owners Support Group - Join us @ MacOSG.com
  Mac611 Mobile Mac Support - about.Mac611.com
   iTunes:MacOSG Podcast | YouTube.MacOSG.com
                   An Apple User Group 
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

Can't get past setup assistant after installing leopard...

i am having trouble getting past the setup assistant after installing leopard on my other computer which is a 1.25 ghz G4 desktop. Everything seems to be going fine then the setup assistant comes up and i go through the exercise of filling it out and at the end it says click on done and then you can use the computer. unfortunately it goes right back into the setup assistant like i had never gone there before. it is in some kind of loop. would it be wise to reinstall leopard? if so, does it know that it was installed already and rewrite over the first install? or is there something else i may try. i tried resetting the PRAM and some other things recommended but nothing seems to work. any help will be appreciated.
thanks in advance...

mr_magicman,
I can imagine how frustrating this must be for you. It sounds like you went for the (default) Upgrade option.
Okay, how about trying this:
1. With the *OS X 10.5 Install Disk 1* still in the bay, Restart your computer. Without access to menus, you'll have to use the power switch to turn it off. +[Alternatively, if you do have access to menus, select the Restart command (in the Apple menu) — always the preferred method.]+
2. If you're using the power switch method, here, wait about 10 - 15 seconds then depress the power switch again for about 5 full seconds (or until you hear the computer come back to life). +[Alternatively, if you had selected the Restart command in Step 1, the computer will start up again on its own.]+ *Either way, as the computer starts up, press and keep pressing, the Mouse until the disk ejects.* By the way, if you're using a Mighty Mouse with a left and right option, press down on the left side only. Hopefully this will get you out of the loop caused by your Install DVD remaining in the drive.
Finally, to be fair to you, I must tell you that there's a more suitable Forum for your particular kind of problem, viz., *Installation and Setup* (http://discussions.apple.com/forum.jspa?forumID=1219) I recommend you check out the questions/answers in that Forum in case your question has already been asked and answered.
PS. If you do re-post your question in that Forum, don't forget to mention whether or not you internal hard disk has been backed up.
GOOD LUCK!
Bill

Problems connecting to internet after installing Leopard

I have been having problems connecting to the internet after installing Leopard. I have a G5 at my office and use safari and AOL, using a cable modem and router. Everything worked perfect until I installed Leopard. About 3 days after installing Leopard on my G5 I started having problems connecting to the internet. When opening "network" in preferences it tells me I am connected, but I cannot connect. So I have to restart my computer every time in order to connect. Then to top it off, often in the middle of the day I am able to get and send e-mail with AOL, but my Safari does not connect. And even more bizare, if I am connected and sign off my AOL, I lose Safari as well. Brought the G5 into the Mac store and after trying some stuff they told me "it should work now" but ....same problems. So last Monday, I installed Leopard on my Macbookpro which I use at home wirelessly, everything worked well until yesterday when the same issue with my G5 is happening with the macbookpro. No connection, it tells me I am connected, signal is strong, but nothing.....so restart and keep going. What is going on? Anyone else having same problem? Any solutions
Roberto

Roberto,
Is the install of Leopard on the G5 and MacBook Pro an upgrade install or a clean install?
Try some simple maintenance to see if this resolves it:
1. Run Repair Disk Permissions (Disk Utility)
2. Go to Network Utility and go to Ping enter in www.cnn.com and see if the packets are received/sent. This is just to see if you can get to the outside so to speak
3. See if your cable modem manfacturer has a leopard upgrade. Sometimes hardware companies need to upgrade their firmware when new Operating systems come out

After installing Leopard 10.5.3 Mail no longer works in SSL

After installing Leopard 10.5.3 Mail no longer supports SSL (Port 993) with password authentication. Setting it back to Port 143 seems to be fine. While this is not a problem at home when I am on the road it is a definite problem. Are other users finding similar problems? What are the work arounds (besides changing mail programs)?

No, all certificates are fine.
Three months on 10.5.3? Really? It seems to me that we had 10.5.2 three months ago.
Anyway, it seems that the mail problem may have been a coincidence with the release of 10.5.3 -- mail servers seem to be back up and mail, both SSL and non-SSL seem to be working as if 0730 EDT.
This then becomes more of an Apple problem of letting the community know that mail is down -- and that problems are most likely not related to the update of Leopard. This would be particularly helpful since many of us (very many, I suspect) have the auto update configuration for doing system updates turned on.

Problem with chess after installing Leopard

The other week I did an Archive and Install of Leopard on my MacBookPro running Tiger. Several applications failed to work following the install and this has been solved by downloading new versions. Although chess seems to be more problematic. Every time I launch chess I just get a message saying that chess has unexpectedly quit. However this behaviour is starting to become expectable. I have read other posts reporting similar problems after installing Leopard however they are able to play a couple of moves before it quits. For me chess does not even launch.
I have tried trashing the preference file, creating and using a new user account, and copying chess from another computer. The copied application just states that I can not use chess with this version of OSX.
Does anyone have any ideas as I really do not want to have to reinstall Leopard just for a application I only use when very bored (which is surprisingly often).
Thanks for any help you can give.
Chuck

Thanks for pointing out that app. Very useful indeed.
I have deleted my copy of chess and reinstalled a new copy from the OSX Leopard install disk and it still fails to launch.
Any other ideas?

After installing Leopard went 2 install life 08 computer will not accept DV

I, actually, have two issues occurring since my install but I will list them separately. After installing Leopard on my G4 Powerbook, which was running tiger fine, I went to install iLife 08 which I purchased at the same time and when I put the DVD in the drive it asks me to choose an option to open CD/DVD...usually install disks just pop up and you start the process...any way I chose "finder" and it pulled the iLife install disk up as a blank CD/DVD with options to burn if I wanted. Any idea what setting may have been altered by the Leopard install and how I might be able to fix it? I appreciate any advice any of you may have...oh, I, also, just had a new memory module added at the genius bar yesterday to upgrade my system, so I could install this software.

Starting in safe mode fixed this issue if anyone is having the same issue or related issues. It appears starting is safe mode clears many things up pertaining to Leopard.

After installing Leopard I cannot connect onto company server

After installing Leopard I am unable to connect to our company server. I was able to see the server when I was on tiger. I tried to connect the server manually but it seems I can't even do that. What to do next ? Server connects both PCs and Mac in the office.
I went into finder preference and click connect to server. I don't see any of our three servers that I saw on tiger. Not sure what to do next.
I get the message
The server does not exist or it is not operational at this time. Check the server name or IP address and your network connection and try again.

I wish I was writing with an answer, but all I can really offer is that "I feel your pain". In my case, after upgrading to Leopard, I can see many, but nowhere near all, computers on our network, and there's no obvious explanation for who appears and who doesn't. Worse, I can see the one I most need to see (my administrative assistant) but there is no option to file share through drop boxes or any other mechanism we've found (despite enabling those options in preferences) and the only option listed is to "share screen" -- which is interesting since my assistant's computer is running Tiger, and selecting it on my end fails every time!
What gives!?! It's tough being the local mac evangelical when s**t like this goes down!

Loop when loading after installing leopard

Similar Messages

Maybe you are looking for