Loopback fade out bug!!!

Hi!
I am trying to make Mainstage 2 work as my full instrument-setup on stage.
My setup in Mainstage is 3 loopers, 2 playbacks and a keyboard with different apps.
I just wanted to hear if anyone has discovered a bug when using fade out in the looper.
After pressing fade out it erases the recorded loop.
I really hope that a update is coming soon.
I would love to use mainstage because it is very easy and "logical" but right now there is still too many buts and bugs.

I've experienced this, however only when Loopback is not playing. Enough to make you say bad words....

Similar Messages

  • Fade in/out bug..!!!

    hello everyone ..recently i just discovered the most annoying bug in logic..so the problem goes like this:
    on my vocal track i create like fade in/fade out on it..when i played it before i close my project those fades still play fine..but when i close it and load my project next time, that vocal track that has fade in like played other tracks sound but only on the fade in section when and it happens on my whole project that has fade in/out on it, so every time theres a fade on it the track like playing other noise...has anyone ever stumbled to this kind of problem..could anyone tell me what should i do in order to avoid this kind of annoying bug..??
    thank you for your time.

    Hey, thanks Sampleconstruct.
    I was getting this bug from time to time too. What I did was shorten the region (first removing the fade) then putting the region back to the original length then re-applying the fade. It worked, but got tedious when it decided to do it on 12 or 16 tracks.
    Your solution worked perfectly and takes a lot less time and frustration when this occasionally raises it head. i wonder what causes the fades to corrupt.

  • Problems with fade outs - audio

    Hi
    I have a problem that's driving me crazy. Whenever I add a fade out transition at the end of a clip, a random piece of audio from earlier in the clip appears at full volume alongside the fade. Is this a bug and does anyone know a way round it? iMovie 5 never used to do this.
    Any help greatly appreciated.
    Thanks
    Ian

    I had a similar issue just on the weekend. But, it wan't just the "fade out transition". Other transitions were affected by this same "bug".
    I decided to fade out the audio first before applying the "fade out transition". This is not the solution which I wanted personally, but it did the trick. No random piece of audio.
    I do agree that a real solution to the issue would be excellent! Hopefully, tech support at Apple will have something for afrocelt1121.
    Good Luck!
    Rodger

  • Fade out problems

    I added a fade out to a slide by going into the timeline view, and double clicking on the "Captured Animation" track, and then selecting fade out on the options tab.
    When I preview it in the timeline, it looks fine.
    However, when I export it, I can see the marking from when I must have moved the mouse, as it fades out. -it is very choppy.
    Is there any way to make a clean fade out on a slide?
    Thanks!!

    Hi there
    You might layer in a Highlight Box that is configured to "Fade in only". It would then gradually fade in and eventually obscure what it covers. You would configure it for 0% transparency.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Fade out when object displaying for remainder of slide

    I have noticed that when you set an object to display for the rest of a slide, that the transition effect still stays at the default of fade in and out. This causes the image to fade out at the last half second of the timeline. Is there a way to set items to not fade out if displaying for the rest of a slide without having to either modify the defaults of every object or touch each ones transitions?
    Seems like there is either a preference I am missing or the beginning of a great feature to add
    Thanks in advance
    David

    Hi David
    Nope, you are understanding it. You might consider submitting a feature request to ask for it. (link is in my sig)
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

    hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

    Hey there Logic Pro21,
    It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
    Logic Pro X: Troubleshooting basics
    http://support.apple.com/kb/HT5859
    Verify that your computer meets the system requirements for Logic Pro X
    See Logic Pro X Technical Specifications.
    Test using the computer's built-in audio hardware
    If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
    Start Logic with a different project template
    Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
    Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
    Delete the user preferences
    You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
    In the Finder, choose Go to Folder from the Go menu.
    Type ~/Library/Preferences in the "Go to the folder" field.
    Press the Go button.
    Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
    If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
    Restart the computer.
    Isolate an issue by using another user account
    For more information see Isolating an issue by using another user account.
    Reinstall Logic Pro X
    Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
    In the Finder, choose Applications from the Go menu.
    Locate the Logic Pro X application and drag it to the trash.
    Open the Mac App Store
    Click the Purchases button in the Mac App Store toolbar.
    Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
    Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
    Click Install to download and install Logic Pro X.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Face time fades out and then tries to reconnect on new ipad retina display on WiFi.  Iphone 4s has no problem with face time from exact same location and same contact.  WiFi signal strong on both devices.  What gives?

    Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact.  What gives?

    rdallas001 wrote:
    Is the router to small?
    Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
    Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc.

  • How can I have an object toggle between fade out and fade in with button?

    Hello all,
    I have a problem and I was hoping someone out there could help me out with it.
    I have smart shape that is set to show for "rest of project" on one of my early slides.  It is not visible in output in the properties, but when a user clicks a button in the project, it should fade in and then stay visible.  If the user clicks the same button again, it should fade out and stay hidden.  So rather than toggle between show and hide, which I know how to do, I want it to toggle between fade in and fade out.  I am having trouble with this.  Setting its transition to fade in and fade out in the properties of the smart shape doesn't help...
    Here is the advanced action I have attached to the button that should allow the user to toggle between fade in and fade out.  The "if" parts works -- the object fades in and then finally "shows" at 100% the "else" part almost works.  It fades out, disappears, but then shows again, which I obviously dont want it to do.  I want it to stay hidden.
    If you can help, it would be great!! 

    I Don't
    But as a work around you could try increasing the canvas size to match the illustrator file, paste in the object then crop off the excess canvas in photoshop

  • How do I fade out audio in Premiere Elements 13?

    HOW DO I FADE OUT AUDIO IN PREMIERE ELEMENTS 13?

    ATR
    Thanks for answering,
    im moving slowely forward in speeding up making presentations by using the new discovered smart tricks or functions.
    So you understand my level of expertise:
    This step by step production methode im using now give's me controle without the (full) knowledge of all the (smart)functions in this program.and slowely learning the way arround.
    starting a project:  a mix of photo's and avi's, starting with manual time line filling with the selected files then the timesaving "Standard crosover on all selected".
    second: placing a header with the titel at the front and a ending a the end. (cut al the wrong or bad pieces and extend some photo viewingtime if needed.)
    And then adding subtitels/tekst and use some other crosovers to highlight the change of subject or stills to movie.
    And at last: placing the background music on "soundtrack": after some fiddeling around ive choose to cut the musictrack between the avi's instead of let the music play all the time and adjust the volume down to zero when a avi is playing.
    this have two advantages:
    1)  the songs can be streched by  by cut and jumping to the end of the avi soundtrack. (no loss of music through fading out and still let it play so need less musicsongs.)
    2) And the rightclick fade function with the standaard fadingtime => "fade out" and "fade in" is easly to use because of the end track avi and begin track music timeline. (And if needed lowering the fading slope/ extend the fading time by moving the "points" on the audio line)
    But; its a lot of work and after the first run through the presentation(or watching on TV) and there is a adjustment needed (fadingtime, volume-changes) you have to adjust every bit of the soundtrack. (keeping the volume "feeling" the same is the  difficult part.)
    I will read about the Smart Mix function and test  it on a other project. see of its fits my kind of using and expertise. (every automatic (smart) function needs understanding of its purpes and limitations and there are a lot of them in premiere
    What is in your opinion the most effective way of adjusting volume of audio parts across the hole project so its merged in to one audio/soundlevel?
    (and offcourse in the hole way of building the presentation.)

  • Can't fade in fade out in iMovie?

    I am now on my new mac mini using iMovie 10.0.6 and don't see the option to fade in - fade out in transitions.  Is there an earlier version of iMovie that works on yosemite that still has those transitions?

    Hello IntuitiveOne,
    Welcome to the Apple Support Communities!
    I understand that you are looking for different transitions in iMovie 10.0.6, specifically the fade transition. To change the style of a transition, please refer to the link and instructions below. 
    Modify transitions - iMovie Help
    With your project open in the timeline, select Transitions in the Content Library section of the sidebar, below the Libraries list.
    To preview a transition, skim it in the browser.
    Browse transitions to find the new transition you want to use.
    Drag the new transition to the transition icon  for the transition you want to replace in the timeline.
    The new transition replaces the old one.
    Have a great day,
    Joe

  • I am editing an idvd slideshow to have some of the music selections from itunes fade out at the end of each vacation segment using music reflecting the country visited.  Is there a way to fast-forward the slideshow to observe the where the music ends.

    I am editing an idvd slideshjow to have some of the music selections fade out at the end of each vacation segment.  Is there a way I can fast-forward through the slideshow so I can see where the music is ending and adjust the time to end properly?  (without repeatedly clicking the forward button on the e-remote) 

    Thanks very much, varjak paw.  I checked half a dozen tracks on my iMac from different albums which did not copy over, plus several which did copy over.  They all show the same location:
    Users/Christina/Music/iTunes/iTunes Media/Music/Brandenburg Concertos etc. (one example)
    What does this mean relative to the music which didn't copy? Is there another step?  or somewhere else I should look?
    And wow, thanks for the info about not having legal right to keep the tracks from the CDs.  I am embarrassed that I didn't know.  I gave most of my CDs to my sister. Before I delete all this highly prized music (400-500 tracks) -- if I get the CDs back from her and keep them at my house, can I continue to keep those tracks on my iMac?  (Sister does not have iTunes or even know what an mp3 is, so it's not like she has copied or imported the CDs -- I just didn't realize I needed to retain possession.)
    Or do I still need to remove all that music from my library?
    Thank you again for your help. 
    C.

  • Can i create a new function (Fade out, Amplify down, Fade In)

    Hi,
    I am using Adobe Audition version 3.0
    Is it possible to define a new function, so that i can select a short piece of the audio file within Edit View, so that the first 5 miliseconds (of the selected piece of audio) will be applied a Fade Out, and the last 5 miliseconds will be applied a Fade In, and in-between will be Amplified by -12dB.
    I have to do this hundreds of times within a 1 hour recording of speech which has many short pauses, in order to remove small external noises between the words.
    I normally select (one by one) the space/pause between the words and amplify this by -12 dB.  Then i select the preceeding 5 miliseconds and apply a Fade Out.  And the 5 miliseconds after the pause a Fade In.
    I have only discovered today how to create short-cuts, so at least i have a short cut for the Amplify, Fade Out and Fade In.
    But it would be great, if i could somehow define a function as i described above, to do all 3 steps within the one function.
    Any help or tips appreciated.
    Dave

    [email protected] wrote:
    Hi,
    I am using Adobe Audition version 3.0
    Is it possible to define a new function, so that i can select a short piece of the audio file within Edit View, so that the first 5 miliseconds (of the selected piece of audio) will be applied a Fade Out, and the last 5 miliseconds will be applied a Fade In, and in-between will be Amplified by -12dB.
    I have to do this hundreds of times within a 1 hour recording of speech which has many short pauses, in order to remove small external noises between the words.
    I normally select (one by one) the space/pause between the words and amplify this by -12 dB.  Then i select the preceeding 5 miliseconds and apply a Fade Out.  And the 5 miliseconds after the pause a Fade In.
    I have only discovered today how to create short-cuts, so at least i have a short cut for the Amplify, Fade Out and Fade In.
    But it would be great, if i could somehow define a function as i described above, to do all 3 steps within the one function.
    Any help or tips appreciated.
    Dave
    You might be able to - but this is going to require quite a complex script that would need some serious editing by hand, and even then I'm not absolutely sure that it would work. The previous problem with this sort of script was that due to an 'anomaly' in the program, the - (minus) sign wouldn't work in a script, but I think that with the 3.0.1 patch, it does again. And even with this working, it's going to require some experimentation. Initially you need to refer to ryclark's method of entering absolute values which you will find here, and then you have to find a way to realise the whole operation a step at a time. You'd have to handle the fade out and the fade in separately, but where I think you might come considerably unstuck is trying to fade to -12dB for the middle section - that's probably the bit that would perhaps require slightly more than might actually be possible. I'd be quite happy to be proved wrong about that though!
    I'm afraid that there's no documentation at all for the scripting language - this is something that Adobe, and Syntrillium before them, have never quite managed to provide, despite promising me some a while back. The good news though is that if you can make this work, then it's relatively straightforward to assign a shortcut key to it. But I should warn you now that this would be one hell of a script...

  • The volume on the second half of my Quicktime slideshow fades out--and I don't want it to do that!

    I used FotoMagico 4.0 to make a slideshow. There are options for exporting, and I chose the one called Custom, which makes a Quicktime movie. For some reason the volume in the second half of the show starts to fade out, and by the end I can barely hear anything. If I export to their Standalone Player, which allows the slideshow to play on a Mac computer, everything works just fine. I'm at my wits end trying to figure out how to fix this. I want to be able to export the slideshow to Vimeo so that people on Macs and Pc's can both watch it, but I can't do it with the volume the way it is.

    Go to System Preferences. Then under the General tab, there is a tick box saying "Restore windows when quitting and re-opening apps." Un tick that box. Once you start and quit Safari again, it will go back to your home page.

  • I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yel

    I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yellow line that graphs volume takes a sharp raise or dip at the beginning or end of the clip, but there is no change in volume when I play back. What am I doing wrong?

    rickeyt
    Thanks for the reply. Great news about the volume adjusts.
    Now about those fades for the volume. How are you doing that?
    1. Right click the Timeline video audio and select Fade and then
    see the Fade options (I had a video with audio file, so I saw the choices as shown in the screenshot)
    2. You can also create two volume keyframes at each end of the Timeline audio clip rubberband (orange line that goes horizontally across the middle of the audio clip). At the position of the Timeline Indicator, click the Add/Remove Keyframe icon, and then with the mouse cursor position the white dots (volume keyframes) to achieve the Fade In and Fade Out audio. In the screenshot below I have moved the Timeline Indicator so that you could better see the white dots (volume keyframes).
    Please let us know if any of the above works for you with regard to the audio fades.
    Thank you.
    ATR

  • Switching off the fade in/fade out transition when viewing previews

    In Library mode, when I'm switching between all my photos, there is a fade in fade out transition as it switches to the next photo.  Can I get rid of this transition?  I would like to just switch to the next photo without any fancy transition.  Possible?

    On my Mac version of Lr (4.1) I can't see any such "fade-in/out" effect. Going from one image to the next is pretty much instantaneous.
    Sadly, that's about the only thing in Lr 4 that is instantaneous for me.
    Phil

Maybe you are looking for