Looping a slideshow with hdmi

I was needing to loop a slideshow hooked up to a tv. We got the hdmi adapter for the iPad. The video dies loop, but once you introduce the hdmi cable it does not loop. Any suggestions

Hi Mister,
the $$$$$ solution: buy DVDSP, you're able to set loops/write some scripts...
the solution: any dvd-player (hard/soft) is able to set looping points A/B and run in repeat mode.....

Similar Messages

Looping Slideshow with Videos. How please?

Hi
I just downloaded Keynote 09 as 08 did not support 1920x1080 Res. I'm pretty au-fait with Keynote but I'm a bit stuck with something.
I'm trying to create a looping slideshow with images and text and also videos. I want the slide show to just run on it's own without any clicking of buttons at all
The problem I have is that when I click play,the Presentation starts off fine, and shows the first few pages with static images and text, but when it gets to the pages with Video on, it plays the video for five seconds then moves on to the next slide, I don't want the slides with Videos on to move to the next one until the video has finished, how can I do this? I've looked at "recording a slideshow" but have been unable to fathom how that helps.
An answer would be much appreciated.
Thank You.

A few different ways about this. You could split the slide show into smaller sections that are withi the limits for posting and then post each section.
You could try a different encoding to make the file smaller. What settings did you use when you created and exported the slide show?

Apple TV slideshow with video and images

I want to make a "slideshow" with alternating video clips (from one movie) and pictures.Can I tell the movie to play for a certain amount of time and then switch to an image and then go back to the movie, repeating until the movie is over and then have the whole thing start over? Or can I use iMovie to break up the video and insert the image and make a movie to sync with the AppleTV? Is there an easy way to do this?

jimmyburan wrote:
is it fried?
probably
a graphics card issue? motherboard?
one of these most likely
HDMI?
probably not
has it turned into a paperweight?
sounds like it I'm afraid
What does the light do, constant amber flashing?
Any response to remote from the light?
Try unplugging all cables for a few mins then try again, if no improvement it's almost certainly had it.
If in warranty try an Apple Store if you have one nearby.

Creating Slideshow with audio

Hello!
I'm working on a Flash CS3 file (with Actionscript 3.0) and
I'm trying to create a slideshow with an audio track. I have 12
slide images and a 12 minute long audio presentation. I want to
pause the images for variable times during the presentation - 20
seconds during the first slide, 60 seconds for the second slide, 80
seconds for the third, etc. I've been able to write a script that
loops along the timeline for the given time over the image then
moves on to the next slide image. It works great if I don't want to
pause and restart the movie, but I'd like to do that.
I've been able to create a single button that pauses and
plays the sound. Here's the tutorial I used to create this:
http://twf23.wordpress.com/2008/02/06/start-and-stop-sound-with-actionscript-30/
But, I cannot get it to pause the timeline at the same time.
I can create a separate button that stops and starts the timeline.
I want one button to do both. It seems like I should be able attach
a function to the play_mc clip that also pause the timeline.
Eventually this will be a template for other such
presentations - where I can swap out the images and the audio thus
creating a PowerPoint-like slideshow for distribution on the
Internet.
Any thoughts?
Thanks!

Welcome to the Apple Discussions.
iMovie is a very straightforward way to do this.
Import your sound and your images, stitch them together and then export them in an iPod compatible format.
Job done.
Regards
TD

Photo "Slideshow" with Premier Pro CS3?

I've been given about 400 jpeg files to create a self-running video (bride and groom family pics) to run during a wedding. I'd like to imbed music to accompany the photos.
A - is it feasible to do this with PP?
B - suggestions for dos adn don'ts
C - What file format should I use to run this on a VCR/DVD player?
D - Do I just import MP3 music files and stuff them in the audio track?
E - I'm the father of the bride, and so there's no money involved--no music royalties to worry about, right?
I've started a PP project with 4 photos, cropping them beforehand with Photoshop to a consistent size (4x6) and file size (under 400kb) and used PP's "scale to frame size" option. They run okay in the program panel
I'll export these 4 to Encore and produce an MPEG, which will run on a VCR/DVD player, right?
Any tips are appreciated.
Merci beaucoup!

I'll agree with Eddie, with these addenda:
I'd not use MP3 as the file format for the Audio. If you are ripping from CD, then go with PCM/WAV. This will be at 44.1 KHz, and PrPro will easily handle the upconversion to 48KHz for DVD. If the Audio comes from iTunes, etc., and is already in MP3, watch out for any embedded "album art," as this has caused many problems for others in the past. As for E, I plead the same - as this depends and I'm not a lawyer either.
For the images, I'd resize (in Photoshop in my case) to the exact size required. If you're going to DVD, then that would be my first choice (720x480 PAR-0.9 for NTSC). If I need to pan/zoom, then I would resize those particular images to the exact dimensions that I needed. In Photoshop, one can create an Action to resize an entire folder. If I have some different sizes (due to pan/zoom), I'd put them into different folders to do the appropriate resizing. I am less a fan of PrPro's resizing algorithms, and opt for Photoshop's instead. I find the quality to be a bit better and the processing load on PrPro to be lessened a bit. Also, as I do my pans/zooms by hand, and specifically for the individual image, I know beforehand exactly how large/small the image will be. All of this is done, before I Import the image(s) into PrPro.
Just wrapping up a "slideshow" with what has become 1900+ still images (up from the original 1400), and PrPro (plus Photoshop) does a great job.
Good luck,
Hunt
PS remember to set the Duration of the stills, before you Import into PrPro. You can alter the Duration (by hand), for any that need more, or less, but decide on the main Duration BEFORE Import. Then, remember to reset the Preferences, should you alter it from what you might normally want.
PPS depending on how you wish to display the DVD footage, you can create a "looping" video in Encore by doing a Playlist and setting the End Action to the video's Timeline. Otherwise, you can do a traditional DVD with the scene selection Menus, etc..

Auto slideshow with progressive image load

Hello everyone,
Does anyone know of a good autoplay slideshow script that
starts with the
first image on page load and then downloads the additional
images when
called? In other words, if there are 20 images in the
slideshow, it doesn't
load all 20 images before displaying the first.
I have just a couple of specific requirements.
I don't need any controls (pause, forward, etc) on it.
Most of the javascript slideshows I've looked at in Google or
have in my
snippet list have the image name hardcoded in the script.
Image1.jpg, image2.jpg, etc, which won't work.
I'll be feeding the images dynamically depending on the
category the user
chooses and the image names are variable.
I'm currently using javascript that automatically shows and
hides divs with
the same class name by changing the display style from none
to block and
back to none as it loops through them.
This works well as I can dynamically write as many divs as
needed by looping
through all the items in a category.
But alas, this one still doesn't start to run until all the
images are
downloaded.
You can see it here:
http://www.onelongfellowsquare.com/
There's actually 3 "slideshows", stacked one on top of the
next, using this
in the "Featured" section.
Thank you for any help or ideas.
Take care,
Tim

Thanks, Jeff.
That's the functionality I was looking for.
I just need to figure out the best way to dynamically fill
the array with
image names from a database.
Take care,
Tim
"Jeff" <[email protected]> wrote in message
news:[email protected]...
> <head>
> <script language="JavaScript1.1">
> 
> </script>
> </head>
>
> <body>
> <a href="javascript:gotoshow()"><img
src="image1.JPG" alt="" name="slide"
> width="400" height="271" border=0
style="filter:blendTrans(duration=3)">
>
> <script language="JavaScript1.1">
> 
> </script>
> </body>
>
> Jeff
>
>
>
> ----- Original Message -----
> From: "TC2112" <[email protected]>
> Newsgroups: macromedia.dreamweaver
> Sent: Saturday, January 31, 2009 7:04 PM
> Subject: Auto slideshow with progressive image load
>
>
>> Hello everyone,
>>
>> Does anyone know of a good autoplay slideshow script
that starts with the
>> first image on page load and then downloads the
additional images when
>> called? In other words, if there are 20 images in
the slideshow, it
>> doesn't load all 20 images before displaying the
first.
>>
>> I have just a couple of specific requirements.
>> I don't need any controls (pause, forward, etc) on
it.
>> Most of the javascript slideshows I've looked at in
Google or have in my
>> snippet list have the image name hardcoded in the
script.
>> Image1.jpg, image2.jpg, etc, which won't work.
>> I'll be feeding the images dynamically depending on
the category the user
>> chooses and the image names are variable.
>>
>>
>> I'm currently using javascript that automatically
shows and hides divs
>> with the same class name by changing the display
style from none to block
>> and back to none as it loops through them.
>> This works well as I can dynamically write as many
divs as needed by
>> looping through all the items in a category.
>> But alas, this one still doesn't start to run until
all the images are
>> downloaded.
>> You can see it here:
>>
http://www.onelongfellowsquare.com/
>> There's actually 3 "slideshows", stacked one on top
of the next, using
>> this in the "Featured" section.
>>
>> Thank you for any help or ideas.
>>
>>
>> Take care,
>>
>> Tim
>>
>>
>
> "TC2112" <[email protected]> wrote in message
> news:[email protected]...
>> Hello everyone,
>>
>> Does anyone know of a good autoplay slideshow script
that starts with the
>> first image on page load and then downloads the
additional images when
>> called? In other words, if there are 20 images in
the slideshow, it
>> doesn't load all 20 images before displaying the
first.
>>
>> I have just a couple of specific requirements.
>> I don't need any controls (pause, forward, etc) on
it.
>> Most of the javascript slideshows I've looked at in
Google or have in my
>> snippet list have the image name hardcoded in the
script.
>> Image1.jpg, image2.jpg, etc, which won't work.
>> I'll be feeding the images dynamically depending on
the category the user
>> chooses and the image names are variable.
>>
>>
>> I'm currently using javascript that automatically
shows and hides divs
>> with the same class name by changing the display
style from none to block
>> and back to none as it loops through them.
>> This works well as I can dynamically write as many
divs as needed by
>> looping through all the items in a category.
>> But alas, this one still doesn't start to run until
all the images are
>> downloaded.
>> You can see it here:
>>
http://www.onelongfellowsquare.com/
>> There's actually 3 "slideshows", stacked one on top
of the next, using
>> this in the "Featured" section.
>>
>> Thank you for any help or ideas.
>>
>>
>> Take care,
>>
>> Tim
>>
>>
>
>

How to connect my Satellite C650 to TV with HDMI cable?

Connecting my laptop with my television??
I have Satelite C650 laptop which isnt that old, but ive connected my laptop to the television using a HDMI cable and it isnt working.
The television is a samsung 1080p one, i would be grateful for some advice.
Many thanks
Claire

Hello Claire
I presume you use your notebook with original preinstalled OS that you got with your notebook so it should work without problems.
Connect your notebook to the TV with HDMI cable. If your TV has several HDMI ports please enable right port on TV and after doing this use FN+F5 key combination to switch from notebook to the TV.
When you use FN+F5 key combination can you see several options including HDMI option?

How can I connect my 3gen apple tv with HDMI to my bush LCD32TV022HD which does not have an HDMI port but does have 1)S-Video I/P, 2)Video I/P, 3) L

How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
This does not have an HDMI port but does have:-
1) S-Video I/P,
2) Video I/P,
3) Audio Input (Left & Right)
4) Audio In jack (for VGA and DVI source)
5) DVI input
6) VGA input

Welcome to the Apple community.
The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
You may well wish to make sure that the DVI connection works before spending any money on a DAC..

[svn] 4136: Find loop variables initialized with "weak" types, e.g., NULL or VOID, and

Revision: 4136
Author: [email protected]
Date: 2008-11-18 14:50:38 -0800 (Tue, 18 Nov 2008)
Log Message:
Find loop variables initialized with "weak" types, e.g., NULL or VOID, and
use the variable type used within the loop to normalize the local's type.
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/adobe/abc/GlobalOptimizer.java

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

How do I use my late 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output.

May be this question has been asked thousand times. how do I use my mid 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output. if apple hasn't removed that feature and has just moved that functinoality to thunderbolt then how can I use it. currently there is no laptop available with thunderbolt output. no 3rd party converter available. whats the use of having feature on latest functionality if we cant use it. I wish they would have made one port has mini-dvi and other thunderbolt for backward compatibility untill some vendor comes up with converter.

It Says :
Mac (21.5-inch, Mid 2011) and iMac (27-inch, Mid 2011) and later computers support Target Display Mode via Thunderbolt to Thunderbolt cable (2 m) when the source is another Thunderbolt-equipped computer.
Name one computer model/vendor which has thunderbolt as output for display + audio. this is so stupid to move to new technology without availbility of its compatible devices.

Regarding apple loops that come with GB

I recently had help with reindexing my apple loops. After deleting all my loop indexes for both the Apple loops that came with GB and the ones I've bought from other sites, I dragged all the loop folders back into GB. I had no problems with dragging the user loops (the ones I bought) and reindexing them. However, for some reason, the apple loops folder that came with GB will not reinstall. The window comes up after I drag it into GB that it is reindexing and then the window comes up with me needing to sign in to ok the process. But when the reindexing is done and I go to show all to see if the apple loops are there, the only ones I can see under show all are the ones that I bought and downloaded. What is weird is that my apple loops that came with GB are on my hard drive as when I click on that folder (Mac hd/library/audio/apple loops/apple/apple loops for garageband) they are all showing there. I can click on them and the demo plays. When I check in the same path but choose apple loops index instead of apple loops, there are no indexes to be found (as should be as I dragged them earlier to trash), but obviously it means the reindexing wasn't done even though the window showed that the process was taking place. I still have all the indexes removed from both apple loops and user loops in my trash. I don't want to delete them in case I need to put something back to fix this problem.
Any help for me with this? I did do disk utility/repair permissions, but that doesn't seemed to have helped that problem as the list when it was finished did not include anything for GB. I really need to get these loops back in as I already have songs done for leading worship that need those loops.
Again, any help would be needed and much appreciated.
Steve

Let me know how it went if you do
i can't say i'm any clearer on the issue. another intel mac lists the premissions as
system Read/Write
admin Read/Write
everyone read Only
and a PPC shows
me
system
admin
others
all as Read/Write
maybe I should now remove myself from having permission to do it
without a more solid knowledge base from which to draw, it just seemed like a good idea. before i made a change like that and left it, i'd want to do a bit of reading on why permissions should/would be set the way they are. iow, find out if there's a reason i'm not listed, and granted full access as an admin.

How to connect my CQ60 notebook to TV with "HDMI to RCA" cable?

Hi there
I have a Compaq Presario CQ60-213TU notebook computer which has an HDMI port. I bought an "HDMI to 3RCA+VGA" cable from ebay. I was able to connect my laptop to the extenal display with VGA, but when i tried to connect my laptop to my non HD tv it did not connect.
Has anyone got a solution how to connect my laptop to my tv with "HDMI to 3RCA" cable.
Please reply asap.
Thanks

you said it did not connect. what do you mean. what was displayed? what input did you have the tv on? need more info than "did not connect"
click Kudos to say thanks if I helped

How to connect macbook pro to panasonic tv with hdmi cable

How to connect macbook pro to panasonic hd tv with hdmi cable

Hi m,
It depends which MPB you have and the inputs on the TV. The following assumes your TV has an HDMI input which will work with a computer.
This is if your MBP is from April 2010 or newer:
http://support.apple.com/kb/HT4241
First connect the adapter to the MBP and the HDMI cable from the adapter to the TV, then go to System Preferences > Sound > Output > select HDMI.
Or if your MBP is older than that and you have a Mini DisplayPort, you can use something like this: http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/
If it's older than that, for video you need a DVI or mini DVI to HDMI or whatever input your TV has. For audio, you need a 3.5mm stereo mini plug to RCA or optical (Toslink), depending on what audio input your TV has.

How do I connect my MacBook Pro to an LCD TV (with HDMI and S-Video ports)?

How do I connect my MacBook Pro to an LCD TV (with HDMI and S-Video ports)? I assume I would need to use the DVI to Video adapter that came with my computer to connect to my LCD tv. I'm just not sure which port I should use on the TV. The HDMI port is being used for digital cable.
Also, does anyone know if this can be done wirelessly?

For a 2010+ MBP you can connect with a Displayport to HDMI, which will include Audio.
With older MBP you will need a displayport to HDMI, if you want audio to the actually TV, then you will need to get a cable with either digital out from MBP to the HDMI, or USB audio mixed into the HDMI
eg
http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/

How do i connect a led cinema display 27" to notebook with hdmi port

how do i connect a led cinema display 27" to notebook with hdmi port

This is the way we did it:
Get this 5 inch Mini Displayport Female to Displayport Female Coupler:
http://estore.circuitassembly.com/products/5-inch-mini-displayport-female-to-dis playport-female-coupler.html#
Then get a DisplayPort to HDMI cable
http://www.startech.com/Cables/Audio-Video/DisplayPort/DisplayPort-to-HDMI-Cable -Male-to-Male~DP2HDMI2MM6
This combination will enable you to connect your CinemaDisplay (mini-display port) to your HDMI input on your laptop or PC

Looping a slideshow with hdmi

Similar Messages

Maybe you are looking for