Looping a track whilst recording

Hi there, I am trying to record a new track, to a looping track in real time. But I am stopped short of my new recording track, at the end of the loop that repeats itself, and therefore can record no further than the end of my loop.
Hope that makes sense.
Any help would be much appreciated. Thanks.

That's strange. Is there a way to get around that?
Not the way you're doing it, no.
How do you record vocals over a loop for example?
You drag the bottom right corner of the loop as far out as you want to make it repeat.

Similar Messages

Creating new tracks when recording in Cycle (loop) mode

I'm having an issue when recording in cycle mode.. I'm able to record (in seperate tracks) in cycle mode. however I can only play the first take (first track) I recorded, however all the subsequent tracks that were recorded do not play. Even when I try 'soloing' them they still don't play. You can see in the arrange window that audio data was recorded on those tracks however they have a "faded" effect to them. They're also not muted. Am I missing a setting?

The issue you describe when recording in cycle mode was a huge frustration for me until I discovered that I was not aware of a simple principle that made all of the difference... I am wondering if the following explanation may be part of the problem that you are experiencing.
The principle is that muting a region, muting a track, and muting an audio channel are three distinct and separate functions. Until I got my head around that principle, I continued experiencing the same frustration that you are having with recording in cycle mode.
Recording in cycle mode results in muting the regions below the last take at the top. When trying to unmute the "tracks" below the top region to listen to the other takes, hitting the mute button results in ALL of the "tracks" either being muted or unmuted, yet the separate regions below are still muted!
The key is to unmute the REGION that you want to listen to (and not the track or the channel). The way to do this is to hit the escape key to bring up a local tool box menu wherever your cursor is... then click on the mute tool which changes the cursor into a mute tool, then click on whatever regions you want to unmute...
Hopefully the above will help.
Power Mac G5 Mac OS X (10.4.8)

Is it possible to lock an audio track in "record enabled" mode?

Here's how i write... i set up a drum loop to play for around 20 minutes, then I rec-enable one audio track to record vocals, and then finally, I skip around among hundreds of different midi tracks.
I just hit the down arrow button, and scroll through dozens and dozens of midi tracks. I quickly hit the keyboard to listen to the sounds. If i like a particular sound, i just want to hit record, and instantly record my vocals along with the midi performance.
Unfortunately, when i hit record, the vocal/audio track doesn't record. Right at the moment when i find an inspiring sound and hit record, the vocals just don't record.
I'm forced to scroll miles up the arrange window, to find
the vocal audio track. It's still blinking the red "rec" button, but this is misleading. It's not actually record enabled. I have to hold down shift, hit it once to turn it off, then hit it again to re-activate record function.
Only then can i record the midi AND vocals.
What I want and need is sooooooo simple to offer as a function, yet totally ruinous to my creative flow if it's not possible. (I used to do this easily on the far inferior
Cubase VST 5.1, OS 9)
Is there a way to record enable an audio track, so that,
until I specifically disable the record function, it's
ALWAYS ready to record the second I hit the record button?
Even after I've been hitting the down arrow to audition
various midi channels?
MacPro 3ghz, 8 gig RAM, 3 raptor drives Mac OS X (10.4.10) Logic 7.2.3, Kontakt 2 soft-sampler, RME 400

I tried to build screensets like you suggested. If I could
get this to work, I think it would be a great solution, but
I'm having serious problems.
I opened a separate mixer, with just the single vocal/audio
track showing.
Then I opened the main mixer, which has all the faders.
If I record-enable a midi track, and then hit the record-enable button on the audio track, the midi track becomes un-enabled. Incredibly frustrating.
The only way I've been able to do it has been to record-enable the vocal track, and then start recording.
Only if Logic is actually recording, can i then record-enable the midi track without deactivating the audio
track.
A big problem is, that when i click to record enable the
vocal track, the arrange window jumps all the way up to the
top, where the audio track is. THen i'm forced to travel
down, to re-find the midi track.
You mentioned in your post that the mixer needs to be
"unlinked". HOw is this done? Will it be possible for
me to click on the record-enable button on the mixer's audio track without the arrange window jumping to that track?

Looping a track infinitely

I want one track to keep on repeating forever, while I record a solo in the other.
Using "Cycle Region" causes both tracks to cycle.
I only want the loop track to cycle.
How do I loop a track infinite times?
I have used copy/paste to paste a loop repeatedly in one track.
But this approach limits me to a fixed recording time.
Thanks in advance!

Thanks, guys!
Yes, that works nicely and pragmatically.
Of course, the time of 20 minute solos in published music is gone.
The aim is to record long solos, but sample the sweetest excerpts to form a final arrangement, of less than 5 minutes.

How to track repeting record data using BAM in biztalk

Hi All,
am new bam, How can How to track repeting record data using BAM in biztalk,please find the below input record
<ns0:Employee xmlns:ns0="http://BizTalk_.Employee.Schemas.emp_In">
<Emp>
    <id>122</id>
    <sal>222222222</sal>
    <name>.srinu</name>
    <dept>java</dept>
</Emp>
   <Emp>
    <id>666</id>
    <sal>44444444</sal>
    <name>.srinu</name>
    <dept>java</dept>
</Emp>
   <Emp>
    <id>333</id>
    <sal>7777</sal>
    <name>.biztalk</name>
    <dept>C#</dept>
</Emp>
</ns0:Invoice>
am tried using TPE but its showing all the 3 rows as NULL in bam primary import database.
So please let know how can i achieve above issue.
Regards,
srinivas

Hi Srinivas,
Using TPE you cannot process repeating records. It doesn’t allow you to loop through your InvoiceDetails (repeating record), hence it shows null in tracked record. This
is one of the limitations when you use TPE.
This can be done using BAM API. If you use Orchestration or by writing a custom pipeline component you can use BAM API where you have the flexibility to loop through the
repeating record and insert each InvoiceDetails node as a record in your BAM activity. BAM API is the only option to track repeating items inside a message as separate activity instances.
Refer this MSDN article for more info:http://msdn.microsoft.com/en-us/library/aa559527.aspx
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How do I enable a track to record in Premiere Pro CS4?

I'm on a macbook. I have a SM57 mic plugged in via an XLR to USB cable. I have tested this mic via garage band, and it works and records fine.
In Premiere Pro preferences I have chosen C-media USB Audio Device.
In mac's Audio MIDI setup, I have chosen C-media USB Audio Device as Default Input.
In Premiere Pro, I have clicked on Audio 1 to highlight that's the track I want to record to.
Yet when I click on the Mic picture in the Audio Mixer to enable track for recording, it does nothing, no drop down box, no indication that I clicked it (other than highlighting itself in yellow for a brief moment).
Then I click the record button, it starts flashing, waiting for me to click play.
Then I click play and a message comes up "You cannont record without enabling at least one track for recording"
Where am I going wrong?
Any help is much appreciated.

ASIO4All - that's for Windows only, right? I'm on a mac.
I've been looking into using Soundbooth, which does recognise my USB connection.
Any tips for workflow between Premiere Pro and Soundbooth?
At the moment it looks like I'll have to edit my video footage first (it has no audio track),
then having watched the rough cut, record my voiceover in Soundbooth, adjust levels etc.
then import those voiceover files into Premiere Pro and edit them in timeline to match my video.
Not exactly ideal.
Is there any way of watching the rough cut while recording the voiceover?
Or am I better off recording the voiceover in Premiere Pro with my rubbish Line in connection, then taking it into Soundbooth to boost/clean up?
Thanks

How can I create a loop in a multi-record block (on the background)

I have a multi-record block.
In one item I change a value.
Upon this change, in the when-validate-item I would like to
change other records in the same block.
I planned to loop the block with go_record and to do my things
in each record. Unfortunately the go_record built-in is
restricted and cannot be used in a wvi-trigger.
Another approach can be to update the records in the database
and to perform an execute_query after this change. Also this
procedure cannot be used in a wvi.
How can I easily loop in a multi-record block???

You can try to put loop with go_record in KEY-NEXT-ITEM on that
field.
Or if you change something and then press KEY-COMMIT you can
update another records in database and after commit do again
execute_query. Something like :
on KEY-COMMIT:
update_another_records;
commit_form;
execute_query;

Split Tracks While Recording w/MediaSource Play

I'm converting some cassettes using MediaSource Player. Can I split tracks while recording, i.e. record the whole cassette and then split that into individual tracks? I've done that with Microsoft Plus!, but can't seem to find that functionality with MediaSource. Also--if I want the absolute best quality recording of the cassettes, am I right in thinking I'd select WAV stereo, w/96.00 kHZ and 24 bits? The cassettes are li've recordings that I'd like to?have professionally mixed in a studio and then released as CD's, so I need the optimal "starting point" as far as the digital files are concerned. Thanks for any advice.

Yes, recording at 24/96 wave is the best that you can go with.
If you have one of the Creative sound cards, check whether you have the Creative Smart Recorder application. It has a split track function.

What is the best approach to track deleted records

Dear all,
We have build a CMS platform which is based on SQL server 2012 tables structure hosted in Azure.
We have build on top of this some REST API method in order to access data from any type of client application.
The issues we need to solved now is what his the best way to track deleted records in order that client application gets informed through web service about deleted data from our CMS.
We were thinking of 2 path actually :
- having a kind of Ghost table for each of our real table where deleted records will be inserted into ( physical delete ). This would mean adding as many Ghost tables as we have production tables
- Adding a IsDeleted flag to each of our table which will be set to true when a record is deleted from our CMS ( logical delete ). This would means adding an IsDelete field to each of our tables, create and update all our store procedure and web services
in order to taken in account that new filter criteria to fetch our records. Quite huge job
Will there be any other approach ?
We are looking the best solution with minimum impact on our current solution
reagards
Your knowledge is enhanced by that of others.

Hello,
@Tom, based on your question
"The question would be what do you need to do with the deleted records and how long do you need to keep them?"
When records is deleted, then I simply want to delete them and informed any client application about deleted items in order to get data in Sync. I will not have any reporting on deleted data !
The only reason of tracking delete tables items, is simply to informed client application through web service sync about the data to be ignored. Client application have a caching database records for performance reason and is is require to not used data
from that local storage which has been reported as deleted by the SQL server on Aure.
Does this make sense ?
regards
Your knowledge is enhanced by that of others.

Why can't I enable an audio track for recording? (It won't let me)

I want to record VO but PP won't let me...
On Mac OS X 10.10 Yosemite in System Preferences:
• Sound Input is set to C-Media USB Headphone Set (an Alesis usb mic...works fine for VO in Final Cut Pro 7)
• Output is set to Headphone port
In Premiere Pro CC Audio Hardware Preferences:
• ASIO Hardware is set to "System Default Input/Output"
• I have also tried "C-Media USB Headphone Set but this, too, doesn't work
• With "System Default I/O" selected, Output Mapping is set to "Adobe Desktop Audio" (only choice), and shows:
     • "Built-in Output: Headphones 1
     • "Built-in Output: Headphones 2
     • "C-Media USB Headphone Set: Front Left
     • "C-Media USB Headphone Set: Front Right
all four of these have a couple of square icons to the right.
In order to record VO, I first need to "enable track for recording" in the Audio Track Mixer. There are no in or out points set in my timeline and the tracks are not locked or solo'd or anything. So why can't I select the audio track I want to use to record VO? I click it but there is no response. I just want to know why this software is not doing what it's designed to do.

is I learn still around -? That was VERY HANDY!

How to view score of one track while recording another.

I want to record audio on one track. I want to read the notes and chords from another track while recording. ( I want to use the previously recorded track only for providing me with the score ) I would very much prefer to have Logic chase the score so that I know where I am in the arrangement while recording.
I am aware I can print out the score as a a pdf file and view that, and its not so bad, however I would prefer Logic to follow along the score and let the playhead indicate the location.
I can do this when not recording. I can view the previous track just before I go into recording, but when I go into recording, the score switches to showing currently track being recorded ( which is empty)

Hi there,
Floating Windows all but disappeared with Logic 8 and many of us mourn their passing. Although some windows are, by default, floating (eg transport), the only one that you can choose to make float nowadays is the Environment, useful if you're setting up faders or some other real-time control.
Pete

Enable track for record

Just bought a new cheapie USB mic at work to do temp VO narrations. Running latest version of CC 14 and Mavericks. The OS recognizes the mic, as does Audition, but in Premiere, I'm unable to select the "R" button to arm a track to record. Any ideas?

Premiere is set to default input and output, which is what I have this mic set as. I do not see the microphone listed though.

Pause key not working whilst recording a video demo.

Hello,
The title says it all really. I've set the pause key to various different keys and have then pressed them whilst recording a video demo with narration.
On video playback, it is clear that the video recording was not paused at any point. What is the issue here? Is there a particular solution?
It isn't project specific as I have tried setting up various projects. The key is definitely set up in preferences and I always run Captivate with admin rights.
Is this a bug or am I missing something?
Thanks,
Jordan

Hi Vocusjordan,
Thank you for contacting Adobe Support.
The pause feature functionality in case of video demo is not available in Adobe Captivate.
However we appreciate for providing us the feedback and so you can use the below mentioned link to ask for a feature request:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Thanks
Loveesh

Switching Tracks;Disable Record Mode

Is there a way to disable the automatic recording mode that happens when you switch tracks.When i'm cleaning up tracks and going between them with my monitors on,the red recording mode button turns on and feedback occurs when the built-in mics kick on.Thank you.

That's something for the "things I'd like to see changed" list.
It never made sense to me since it seems to me that you choose a Track for recording only once or a few times, whereas you choose it for mixing, etc. many, many times and then always have to disarm it so there are no accidents.

Player Error: "You cannot record without enabling at least one track for recording"

So I'm trying to adjust my audio using the track mixer in premiere pro cc. I assigned 2 clips to a submix. When I tried to record, I got the following error: "You cannot record without enabling at least one track for recording." I disabled other tracks, then re enabled them all, muted them all, but still got the same error when I tried to record.

This is how I have just made a recording:
Select track to record (1), Select record (2) then press play to record.
Use the in-out markers in the program monitor to select the area to record.

Looping a track whilst recording

Similar Messages

Maybe you are looking for