Looping real instruments - follow time of project option not selectable

Hi,
I've recorded a real instrument track, now I would like to make it loopable and safe it to the instruments library.
So, I trimmed it to the desired lenght and wanted to export it.
Now my problem:
the export option "follow time and tonality" is not selectable irrespective whether or not I checked the box at the bottom in the edit track window that should allow the loop for following the project parameters.
Does anyone know what could be the problem?
THANKS

It seems that it is crucial to adjust the region one wants to loop to an integer bar lenght, then recheck the box, follow time and tonality in the track window. I have noticed that although following the same proceedure sometimes it not possible to export the such a loop as one that follows the tempo of the song (unable to check box, in the loop-export dialogue). To me the reason is not completely clear, often it requires some trial and error, import loop in new project to export it as a tempo following one.

Similar Messages

No matter how I try to finalize my imovie , I get the following message: "The project could not be prepared for publishing because an error occurred. (Error code = -49))"

No matter how I try to finalize an imovie I get the following message:
"The project could not be prepared for publishing because an error occurred. (Error code = -49)"

Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
Easiest way to find out if this is the problem is by:
• Create a new User-Account
• Log out of Your old one and into this
• Re-try iMovie
If it now works OK - then 99.9% the problem is iMovie pref. file that needs to be trashed.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occurs only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W

Too many real instruments for a new project?

I keep getting the notification which says "Part of the project was not played - This project has too many real instrument tracks to be played in real-time".
BUT the problem is that this occurs even when I open a new garageband file (i.e. no tracks!) and I'm only 3 seconds into recording the first track! So garageband is basically not working for me. I've tried uninstalling and reinstalling it to no avail. Just a few months back I was still able to use it comfortably to do edit many different tracks together so I really don't know what the problem is. I don't really know if its a problem with the processor as I barely use the memory on my macbook pro and even when recording CPU usage doesn't go above 20% so I'm really at a loss. Please help!

Oh apple support asked me to try that out too but it did not work.. In fact for some of the suggestions they gave (eg using a different user, or even locking the track) it only managed to extend the period of recording to about 10 seconds before the problem resurfaced and after that it was back to the same 3 second problem.
But that is an important clue, Josiah. If you cannot even record properly from a different user account with basic settings, we know that the settings in your user account cannot be causing this - this looks like system wide trouble.
You could run a hardware check over night, to check your hardware:
Intel-based Macs: Using Apple Hardware Test
and if the hardware check does not show any problems, I'd reinstall Mountain Lion.
See Linc Davis's post on how to reinstall: Re: Garageband doesn't open in Mac Mini mid 2011
Regards
Léonie

Follow Up Document - Items are not selectable (BUS2000117)

Hi CRM Experts,
we have created a service Order (BUS2000116) and afterwards we want to create a Service Notification (BUS2000117).
When pressing the button 'Follow-Up' a Pop-Up is opening where we normally should have the option to select the items which we want to have in the Service Notification.
The problem is that there is a message which says 'Items can not be copied' and this message is appearing for all items.
We have made all necesarry customizings in:
Customer Relationship Management -> Transactions -> Basic Settings -> Copying Control for Business Transactions -> Define Copying Control for Transaction Types
Here the flags for 'Copy Item Number' and 'Complete Reference' are marked.
We have made tests in customizing:
Customer Relationship Management -> Transactions -> Basic Settings -> Copying Control for Business Transactions -> Define Copying Control for Item Categories
and also:
Customer Relationship Management -> Transactions -> Basic Settings -> Copying Control for Business Transactions -> Define Item Category Determination when Copying
...But without succes.
Anybody knows what is going wrong? Is there another customizing we have to change?

Hi,
First check all the configurations are done in Copy Control of business transactions in SPRO.
Then check header ' system status' of Service Order (BUS2000116) , it should be "RELEASED" , If not then set the system status by changing the 'user status' . At one specific 'user status' , the system status will get changed to "RELEASED" . Then the option of copying line items will be enabled.
If you want to know for which specific header user status the line items get released , you can check in SPRO- 'Status management ' . Check out the header status profile of the service order and you can find all the user statuses and the corresponding system statuses .
regards,
Nithish

Recovering iPhoto from Time Machine - Project is not recovered, the book is

Having lost a book in iPhoto, I recovered iPhoto from Time Machine. The Project containing the book was there, but the pictures in the book were not. The pictures are in the photos section, but not in the book. I do not want to have to reload the pictures one by one. Any suggestions. Looks like a defect in Time Machine
Richard

I just recovered a library with a couple of books in them and all photos were in the book. You might try recovering a different backup of the same library. Go backward from the time of your last attempt and then, if necessary, forward. If all fail then you've got an problem with TM and that library. Check to see if other files can be recovered satisfactorily. If you use iWeb try recovering your domain file from a time back (select the option to keep both so you don't lose your work to date).
It might be a little late, i.e. the horse is out of the barn, but you might consider using a separate library for your books. That provides a couple of benefits: 1 - working in your primarary library, deleting files, etc. will have no effect on your book; 2 - it's easy to backup and archive the book for ordering additional copies in the future. Old Toad's Tutorials #9 and 9a describe two different methods. I prefer #9a.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: iPhoto 8's new option in it's rebuild library window, "Rebuild the iPhoto Library Database from automatic backup" may make this tip obsolete. We'll know when users have occasion to use it and see if that's the case.

Archice Project option not available

I cannot archive a project in Garage band, the archive button is grayed out when I "save as". Any thoughts?
Scott

http://www.bulletsandbones.com/GB/GBFAQ.html#saveasarchivedisabled

SWF animations loop even though option not selected

Anyone else experience that?
As was the problem with Cp3, they, once again, did not include the source files. I suspect that they are in AS2 and therefore don't work in an AS3 project.
Thoughts?
M-

Triple-click anywhere in the line below on this page to select it:
~/Library/Safari/LastSession.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder (or just Show Info)
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?
If you don't have read and write access to the item, change the settings as directed here. Note, however, that if one file has wrong access settings, most likely others do as well. If the item is locked, unlock it.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Cant hear real instruments on playback in Garage band

Can anyone tell me why I can't hear the real instruments in my song in garage band version 5.1 on macbook. I could hear everything while recording the tracks and the last time I listened to the song but now all I can hear are the software instruments. I can see the WAV data and the VU meters are moving on every track. I opened up a different song and I could here the real instrument on it. All settings etc are the same , nothing is solo'd, ? ! Any ideas please ? !

In the new GarageBand the quantize is per region.
For a real instrument region open the Track editor.
Select the "track" tab and click "Enable Flex"
Select the "Region" tab and you will see the "quantize" control.

NWDI Issue : The project is not in DTR

Hi Friends,
We have created a NWDI based project. 2 peoples are working on same NWDI based WD project on 2 diff view. After Sync the project its not allowing the other person to edit the project .Its giving the following error.
The operation requires the writeability of the following Objects:
The project is not in DTR, but there are readonly files!
Component Controller com.ibm.wcm.repord.ui.searchrepairorder.SearchRepairOrder
        readonly: C:\WCMworkspace.jdi\0\DCs\ibm.com\wcm\repord\ui\_comp\src\packages\com\ibm\wcm\repord\ui\searchrepairorder\SearchRepairOrder.wdcontroller.xlf
        readonly: C:\WCMworkspace.jdi\0\DCs\ibm.com\wcm\repord\ui\_comp\src\packages\com\ibm\wcm\repord\ui\searchrepairorder\SearchRepairOrder.wdcontroller
Please Help.
Regards,
Mithu

Hi,
Find the similar solutions under these:
error while trying to modify a project using JDI
Error :    The project is not in DTR, but there are readonly files!
dtr problem
Hope of any help.
Cheers,
Swathi
Do offer pts

Deploy of Essbase Cube from EPMA to Shared Services Project is not possible

We cannot deploy Essbase Cubes to shared services projects. The projects are not selectable in the box in the deploy dialog. Help is urgently needed. Our version is 11.1.1.3.
Many thanks
Michael

Hi,
It looks like a known issue
When deploying an Essbase application, the Shared Services project drop-down is not populated as expected. (8239445)
Cheers
John
http://john-goodwin.blogspot.com/

Real Instruments play beyond end of repeated loop

I've tried every google-fu trick I could think of to see if anyone else has had this problem.
I record a real instrument (say an electric guitar riff). I drag/repeat/loop it 3 or 4 times. It plays properly.
Then at some point I select it, and move it left or right.
The part starts at the right time, but will repeat an extra time beyond the visible onscreen loop. Once this glitch occurs, neither resaving, shrinking/re-repeating, moving it around and then back to where I want it make the track end when it's supposed to.
The only way I've found around it, is to end the repeat early and let the erroneous repeat play out, or just end the repeat entirely, and use cut'n'paste instead.
This happens to me *all the time*... anyone else seen this or have a resolution?

Thanks for the suggestions. I can't remember deleting any tracks... however, how would i check for "hidden" tracks?
The funny thing is i can hear the effect returns for the real instrument tracks...tracks that are heavily reverbed i can hear a faint echo of the track. and like i mentioned the drum loop and software piano still play fine.
And, I also see monitor activity in the real instrument tracks when i play the song. Everything looks normal, but of course, the sound isn't there.
Thanks again for your help!
Message was edited by: Ike the Longshoreman
P.S. I just tried Unsolo all tracks and Unmute all tracks... still the same problem.

Use the LabView time delay in a while loop instead of using the instrument inherent time loop.

I have a zes lmg500 that I use. It has the option of continues measuring data, with a user control cycle loop (still using a while loop but the delay is coming from the instrument). The problem is that the loop time is not constant. Can I use a very short time (100ms) as the instrument cycle time but use a longer time delay in the while loop that collect the data?
I know many instrument offer the same abilities, so the question is relevant to all of them.
Thanks for any help
Solved!
Go to Solution.

Does that measurement VI have built-in wait functionality and a timeout?
If not, then you are simply polling the VI at 1 kHz, but I suspect that this is not the case or your Waveform Chart probably wouldn't look as you expect (getting 0's put in everytime measurement data is not available).
I expect that if you have the instrument set up to send data at a fixed time interval (i.e. 100 ms), all the data that it is sending you will end up residing in your serial buffer (or the instrument driver will have taken it out and put it in another internal buffer), so if you come back to read it 1 sec later, then you will have 10 data points to go through. Whether you can read them all at once with the read VI or have to call it a whole bunch of times until empty I can't say.
What is your objective?

How Can I Turn A Software Loop Into A Real Instrument Loop?

My primary reason for wondering about this is that one of my songs requires a windchime sound throughout...but not too much of one. Just a touch of windchimes. The Orchestra Kit has a few pretty good windchime sounds BUT the natural sustain is too long for what I want. If figure I can get my wisp of a windchime if I can convert my miniscule software loop into a real instrument loop then whittle it down to the sound I want.
How can I make this conversion?

Well, Hangtime...You were absolutely right (again!) about messing around with the notes preferred over dissecting them.
I got an absolutely gorgeous windchime sound from applying a couple of carefully auditioned filters and then messing around with the volume at the end of each note. It actually turned out better than I had imagined. It turned out so very nice that I gave it a well spaced looping rhythm and now the windchime is throughout the entire song and the song is better for it.
My dissection effort didn't get a natural sounding windchime effect at all. I trashed it almost immediately.
hugs

FIND NOTES FROM REAL INSTRUMENT LOOP?

Hello,
Is there a way to get/find the notes to a real instrument blue loop (Cinematic Transition 43)?
When I edit it, it only shows me waves. Thanks and let me know anybody!

I think the plug-in "Melodyne" should be able to help you with the issue.

How to convert a real instrument file into a software instrument loop?

Thanks.

You can't convert real instrument to software instrument.
But you can have your real instrument make into a
real instrument loop.
In edit chose add to loop library (translation may not be accurate I use GB in french)
Your audio section must be higtligthen
Message was edited by: Vince Burn

Looping real instruments - follow time of project option not selectable

Similar Messages

Maybe you are looking for