Looping table cells....... is it possible to loop more than one table cell?

Hi there
Hope everyone is doing well
I have been using the addt looper wizard and it works great.....
I usually put all the things I want to loop into one cell.... then select all the things and apply the looper.... which works fine....
But..... it is hard to align all the elements I want to loop
I have been using transparent gif images to space the loops evenly but when I space dynamic taxt on top of each other there is a large gap.....
It is a nightmare to get it looking even
Ok say I want to loop this.....
A thumbnail
Product ID
Price
It would look like this
A thumbnail
Product ID
Price
Because I cannot reduce the space between the lines......
So I would like to place all the different elements in separate table cells and loop them..... I have tried and get really strange results....
When you look at most online shops, their product pages have a thumbnail image the id, price, description, etc.... all spaced evenly.... and looks like is looped...... So.... how do I do it?
Is there any easier way to align the things I want to loop?
Any help would be great

Hi there
I seem to have figured out how to loop cells....
Should have thought of it earliar but anyway
Was easy....
Just create a looped (repeat) region and insert a table into the region and edit the table to align all the looped elements easily....
Cool

Similar Messages

JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC

Hi,
I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
Regards
Kumar

HI,
Yes it can be possible ,please see the following links
JDBC Receiver with Oracle Stored Procedures
configuring jdbc adapter with multiple tables
RFC -> XI -> JDBC Scenario Updating Multiple Tables
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
JDBC Adapter multiple Selects
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
Regards
Chilla..

How to create Criterian For more than one table

Hi,
I have one problem how to create criteria for more than one table in that using one criteria hot to get the values from database in that more than onetable for getting these values .Please send me the exampke code.
reagrds,
raghu

Hi,
I don't think its possible to create fieldcatalog for different tables,
but if you want to do so create a dummy table which has all the fields which you want in fieldcatalog.
populate the data from different table to that dummy table
then create fieldcatalog for that table and pass it in the function module...
Regards,
Siddarth

Simple journalization with more than one table

Hello,
I wanted to journalize more than one table with a simpe journalization?
is it possible?
I confgured my OdiWaitForLogData like that:
OdiWaitForLogData "-CONTEXT=GLOBAL" "-GLOBAL_ROWCOUNT=2" "-LSCHEMA=employe" "-OPTIMIZED_WAIT=AUTO" "-POLLINT=2000" "-SUBSCRIBER_NAME=SUNOPSIS" "-TIMEOUT=0" "-TIMEOUT_WITH_ROWS_OK=YES" "-UNIT_ROWCOUNT=1" "-TABLE_NAME=Departement,Employe"
when I executed my interface, my interface is still at the step running.
what happened please?
Thanks
Billyrose

Hello,
I wanted to journalize more than one table with a simpe journalization?
is it possible?
I confgured my OdiWaitForLogData like that:
OdiWaitForLogData "-CONTEXT=GLOBAL" "-GLOBAL_ROWCOUNT=2" "-LSCHEMA=employe" "-OPTIMIZED_WAIT=AUTO" "-POLLINT=2000" "-SUBSCRIBER_NAME=SUNOPSIS" "-TIMEOUT=0" "-TIMEOUT_WITH_ROWS_OK=YES" "-UNIT_ROWCOUNT=1" "-TABLE_NAME=Departement,Employe"
when I executed my interface, my interface is still at the step running.
what happened please?
Thanks
Billyrose

Persisting CMP bean over more than one table

Hello,
I was wondering if it is possible to persist an Entity Bean over more than
one table using CMP. For example 3 attributes go in table A and 2 attributes
go in table B.
I can see this might come in handy when having some kind of inheritance in
your architecture.
Thanks,
Rein Reezigt

CMP are based on one DB object however object could be a database table or a
view. You can create a view and base your bean on that view. This is mostly
useful for read-only entity beans that just do select queries because databases
have all kind of different restrictions on update froma view, ( for example
ORACLE allows update to only one table in view). However in case you need a
logical abstraction of multiple tables, consider EJB2.0 relations or a product
like toplink for your object to relational mapping.
Viresh Garg
Principal Developer Relations Engineer
BEA Systems
Rein Reezigt wrote:
Hello,
I was wondering if it is possible to persist an Entity Bean over more than
one table using CMP. For example 3 attributes go in table A and 2 attributes
go in table B.
I can see this might come in handy when having some kind of inheritance in
your architecture.
Thanks,
Rein Reezigt

Trigger for more than One table

Hi,
is it possible to create a trigger for more than one table?
I need a trigger that fires when anyone of the users updates a special value in one of the DB tables.
this value is in about 8 or 10 tables, or must i create a trigger for each table?
thanx
marcel

You would wrap the functionality required into a packaged procedure and then have a trigger on each of these tables that simply call this packaged procedure.
Yes, you would have one trigger per table.

How to delete the double records connected to one or more than one tables in SQL 2008?

Hi
Can anyone please help me with the SQL query. I Im having a table called People with columns names: personno., lastname, firstname and so on. The personno. is having duplicate records,so all the duplicate records i have written with "double" in
the beginning of the numbers. I tried deleting these double records but they are linked to one or more than one tables. I have to find out, all the tables blocking the deleting of double person. And then create select statements which creates update statements
in order to replace the current id of double person with substitute id. (The personno. is in the form of id's in the database)
Thanks

You should not append "double" in the personno. When we append it will not be able to join or relate to other table. Keep the id as it is and use another field(STATUS) to mark as duplicate. Also we will require another field(PRIMARYID) against
those duplicate rows i.e the main or the primary personno.
SELECT * FROM OtherTable a INNER JOIN
(SELECT personno, status, primaryid FROM PEOPLE WHERE status = 'Duplicate') b
ON a.personno = b.personno
UPDATE OtherTable SET personno = b.primaryid
FROM OtherTable a INNER JOIN
(SELECT personno, status, primaryid FROM PEOPLE WHERE status = 'Duplicate') b
ON a.personno = b.personno
NOTE: Please take backup before applying the query. This is not tested.
Regards, RSingh

NTLM Authentication : why is it not possible to create more than one NTLM realm ?

Hello,
I'm wondering why it is not possible to create more than one NTLM realm on a wsa.
Can you explain exactly what is the blocking point ?
Thanks in advance
Regards

Well, at this point (pre 7.5), there isn't an agent, the WSA is joined to the domain, just like a Windows box, it authenticates via that trust relationship. From that point it is all based on how NT/Active Directory domains work. As long as there is a trust between the domains, you can can auth users from as many domains as you like.
There is an agent in the works. The ADAgent will be released with 7.5. The code is already available, it was released with the ASA ver 8.4, and it will be used to pass authentication info to the WSA. At this point, current versions still require trust relationships between all of the domains touched.
Taken from the setup guide: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_install.html#wp1054011
Before you configure even a single domain controller machine using the
adacfg dc create
command, ensure that the AD Agent machine is first joined to a domain (for example, domain
J
) that has a trust relationship with each and every domain (for example, domain
D[i]
) that it will monitor for user authentications (through the domain controller machines that you will be configuring on the AD Agent machine).
Depending on your Active Directory domain structure, the following scenarios are possible:
1. Single Forest, Single Domain—There is only one domain, D[i] for all domain controller machines, which is one and the same as domain J. The AD Agent machine must first be joined to this single domain, and since no other domains are involved, there is no need to configure any trust relationship with any other domain.
2. Single Forest, Multiple Domains—All the domains in a single forest already have an inherent two-way trust relationship with each other. Thus, the AD Agent must first be joined to one of the domains, J, in this forest, with this domain J not necessarily being identical to any of the domains D[i] corresponding to the domain controller machines. Because of the inherent trust relationship between domain J and each of the domains D[i], there is no need to explicitly configure any trust relationships.
3. Multiple Forests, Multiple Domains—It is possible that domain J might belong to a forest that is different than the forest to which one or more of the domains D[i] corresponding to the domain controller machines belong. In this case, you must explicitly ensure that each of the domains D[i] has an effective trust relationship with domain J, in at least one of the following two ways:
a. A two-way external trust relationship can be established between the two domains, D[i] and J
b. A two-way forest trust relationship can be established between the the forest corresponding to domain D[i] and the forest corresponding to domain J

Layout issue - More than one table sections on report?

Hello all
I am wondering if any of you know if there is a way to have more than one table or table field on a report.
I'm asking this because I'd like to include a large number of fields in one report, but then that makes the report hard to read (everything is on one long line).
I am wondering if there is a way to have more than one table section on a report so I could have the address information at the top of the report than have other additional information below the address. Basically I'm interested in making things easier to read for the user.

Use Pivot tables to isolate the columns you want in each table in your report.
Mike L

How can i update more than one table at a time?

i would like to update more than one table at a time. In Java Studio creator2 how can i do table updation?

Hi,
Please go through the below thread might be of help to you.
http://forum.sun.com/jive/thread.jspa?forumID=123&threadID=51839
RK

Is it possible to email more than one photo at a time with the iPhone? Thanks

Is it possible to send more than one photo in an email using with the iPhone? Thank you in advance for your help

Yes. Open your camera roll in the thumbnail view, tap the arrow button on the top right, tap all of the photos you want included in your email, tap Share at the bottom, tap Email. Note: all email providers have limits on the size of emails that are permitted so be careful not to try to add too many or it may not be delivered.

Using Maverick, how is it possible to open more than one calendar window?

Hi, I'm using Maverick 10.9.1
My question is: how is it possible to open more than one calendar window? i would like to have on the right my personnal calendar dates and on the left, my company calendar.
Many thanks in advance for your help!
ph

See if the section on group calendar helps.
http://www.dummies.com/how-to/content/basics-of-calendar-in-os-x-mavericks.html

How to insert into more than one table at a time also..

hi,
i am a newbee.
how to insert into more than one table at a time
also
how to get a autoincremented value of an id say transactionid for a particular accountid.
pls assume table as
transactionid accountid
101 50
102 30
103 50
104 35
i want 102 for accountid 30 and 103 for accountid 50.
thank u

@blushadow,
You can only insert into one table at a time. Take a look here :
Re: insert into 2 tables
@Raja,
I want how to extract the last incremented value not to insert.Also, I don't understand your thread title... which was "how to insert into more than one table at a time also.. "
Insert, extract... ? Can you clarify your job ?
Nicolas.

Is it possible to add more than one page at a time in pages - word processing?

Is it possible to add more than one page at a time in pages - word processing?

I haven't been able to find a way to add more than one page at a time. I think you'll have to add them one at a time.

Is it possible to print more than one picture at a time on a single page and if so, how?

is it possible to print more than one picture at a time on a single page and if so, how?

Hi Rowegarth.
HP Photo Creations offers several ways to print multiple photos on a page. Here's a link to some preset grids. If you don't have HP Photo Creations already, you'll be prompted to download the software. (It's a free download.)
You could also start with a "Design Your Own" collage print with a white theme.
This video shows some ways to print multiple photos in HP Photo Creations to make them easier to cut out:
www.youtube.com/embed/VRoGjhXPm4I?rel=0
The beginning shows an older version of the software, but the second half (at 1:17) explains the grid settings.
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Oracle OUTER JOIN on more than one table

Hi!
Friends, please help with this urgent problem: How can an outer join be written on more than one table?
An SQL Server query:
SELECT * from a INNER JOIN b on a.id = b.id LEFT OUTER JOIN c ON c.id = a.id AND c.id = b.id
works fine with SQL SERVER
But Oracle query:
SELECT * from a,b,c WHERE a.id = b.id AND a.id = c.id (+) AND b.id = c.id (+)
gives an error: OUTER JOIN cannot be used on more than one table? Why?
I use OracleDriver from classes12.zip to connect to Oracle8i database.
Please, help!

The Oracle 8i and later SQL reference reads that the following "join_types" are supported and under this syntax it does not limit the LEFT OUTER JOIN (syntax the same as SQLServer example in original note) to two tables as implied in these notes:
The join_type indicates the kind of join being performed:
Specify INNER to indicate explicitly that an inner join is being performed. This is the default.
Specify RIGHT to indicate a right outer join.
Specify LEFT to indicate a left outer join.
Specify FULL to indicate a full or two-sided outer join. In addition to the inner join, rows from both tables that have not been returned in the result of the inner join will be preserved and extended with nulls.
You can specify the optional OUTER keyword following RIGHT, LEFT, or FULL to explicitly clarify that an outer join is being performed.

Looping table cells....... is it possible to loop more than one table cell?

Similar Messages

Maybe you are looking for