Loops iPad

How do I insert loops on iPad?? (3rd generation)

boncers wrote:
How do I insert loops on iPad?
tap the loop icon toward the topRight of the screen to display the available loops, swipe up on the list to scroll through them, then tap and drag a loop into a blank area of the timeline

Similar Messages

FIX: IPad turns on and off in a loop during charging, boots to home screen and reboots

Ok, after having my ipad 2 3rd Generation for about a year, its bombed out on me,playing on it until battery drained. Didn’t think anything of it, plugged into charge thinking it would be charged by the morning. This didn’t happen.
It was stuck on the apple sign, booted to home screen and switched off again due to low battery. Continued on this loop for the whole day……
I searched the internet and it seemed all doom and gloom that I would need to by another one. Then I stumbled upon a forum where the advice so far has worked for me.
The reason why it gets stuck in a loop is because the IPad was not shut down manually, so therefore keeps trying to boot up soon as it has some battery power. Problem is, its gone beyond a point and now and there isn’t enough battery life to boot to main or home screen after apple logo.
The remedy is quiet simple, follow these steps to get the ipad to home screen to power it down so it has sufficient time to charge up and boot normally and get off the endless loop.
Plug into wall socket to get it charging.
Wait until the apple logo appears and wants to boot up.
QUICKLY hold down home button and reset/ sleep button at the same time until it reboots.
Release buttons now. should now power down and reboot
Repeat step 3 at least 30 to 40 times which is about 10 minutes in duration everytime you see the logo appear on the screen.
Now Let IPad boot up fully, should see home screen with about 2% battery life
QUICKLY hit the rest/ sleep button down for about 2 to 5 seconds.
Swipe the screen to when slider appears to switch off the ipad.
This will now power down the IPad which now will not reboot by itself so it can now charge without any interruption’s.
Allow battery to charge for a least an hour or two without trying to put it on.
Switch the IPad on
You should now have about 10 to 20% battery Life
Power it down again by holding the reset/ Sleep button down again and swipe the screen to power down, let it charge fully to 100% now which will take few hours
Enjoy your IPad again
Lesson learnt. When your battery power is low, dont wait for it drain completely, rather power the pad down manually and let it charge when there is only about 2 to 4% battery life left.
Hope this guide helps people with the same problem as I had. Took me about 2 days of research and searching until I found a solution that worked. Hopefully this will assist anyone going through the same pain, and possibly not have to buy another one which seems to be the case when people take the pad to an istore with the same issue.
Cheers,

I tried to restore using recovery mode it give error 4013, also tried the same with iMac with my friend again error.
Let me give little more details:
1. After iOS 8.2 upgrade, 2-3 days often 3-4 times a day it used to restart again and again then will get Home screen.
2. Also at times it happened, it boots again and again left the device as it is then it comes to Home screen.
3. Lastly it did the same behavior but it did not boot up, but keep booting again and again apple logo is shown then restart
4. Tried to get into recovery mode, windows PC error 4013, now in the recovery mode.
My Battery was in good condition, when it happened it was ~80% now may be very less did not charge until now.
I read somewhere in the forum keep re-starting manually again and again, someone said since it did not shutdown properly there is a problem, please help.
The device is 1.2 yrs old ONLY.
Best regards
Prabu

Loops for ipad

Can you get apple loops for garage band on ipad, I have used the loops on mac and like them, I just want to use them on my ipad.
Thamks :-)

On the App Store. But never mind I found them. All I needed to do was press reset in the loops folder to bring them all up. Thanks.

How can I add loops in GarageBand from my ipad.

I have purchased an app known GarageBand in my ipad 4,
I wanted to make some music through it but some loops are not there in it as compared to mac eg:beats n all. I wanted to know how to add it or find it in the application.
Thank you.

jtetard wrote:
Hi,
You only able to do it by ITune.
No.
You can easily delete songs on the iPad.
Open the Music app.
Tap Songs at bottom
Swipe left or right across the song then tap Delete.

I have GarageBand for iPad 2 and noticed that there are far fewer loops for iPad than for apple laptops. Is there a library available of apple loops? I haven't been able to find any if there are. Any help would be greatly appreciated.

I have GarageBand for iPad 2 and noticed that there are far fewer loops for iPad than for apple laptops. Is there a library available of apple loops? I haven't been able to find any if there are. Any help would be greatly appreciated.

Update: An Apple rep called me today to update the status of my return. I was told that the replacements for the BLACK iPad 2's was still another 3 weeks out (at least) so they offered me a brand new WHITE 16GB iPad 2. I could have that or continue waiting. I opted to go ahead and accept the offer of a new white one. Worst case scenario if I don't like the white one I have buddy that just bought a 16GB black one that he would be willing to swap it.

I am trying to update and restore a backup of an iPad. I ended up in an infinite loop of restoring and re-setting up the iPad. Help???? Suggestions?

This iPad had iOS 4.3.3 and I wanted to update it to the most recent software, 7.1. The first thing I did was I backed it up to my computer so I would be able to restore all of the photos and data after I had updated. At first, I tryed just clicking Update. It kept failing with error 9006. Then, I tryed the Restore and Update. This timed out even though it seemed to be moving alone just fine. The last thing I tried was to wipe the iPad and then update it. This worked. When it came up on my computer, it asked if I wanted to restore from a backup. I said yes and selected the backup that I made. It said Restoring. Afterwards, it took me through the normal process that you would go through to set up a new iPad. at the end of the setup, it asked if I would like to set it up as a new iPad, or restore from a backup. ???????? I tried to restore from backup and it started and endless loop of restoring and setting up, and restoring again. I eventually selected to set up as a new iPad. I cannot firgure out how to get the pictures back onto the iPad from the backup if the restore won't work. I was wondering if it is possible to find the picture files on my computer??? Does anybody have any suggestions or ran into the same problem???
FYI: I was a bit disapointed to learn that the online support chat now costs $20

Restore from iTune Backup
1. Settings>General>Reset>Erase all content and settings
2. You will be asked twice if you want to erase iPad
3. Slide to set up
4. Select Language
5. Select Country
6. (a) Use Location Service (b) Don't use Location Service
7. Choose Wi-Fi Network
8. Enter Wi-Fi password
9. (a) Setup as new (b) Restore from iCloud Backup (c) Restore from iTune Backup
10. Select "Restore from iTune Backup"
11. You will be instructed to connect to iTune (computer)
On computer
12. Two options offered
13. (a) Set up as new iPad (b) Restore from backup (a list of backup will be shown)
14. Select Restore from backup and select the backup
15. Continue
16. Restoring iPad from backup
17. The settings for iPad restored

Is there a way to have presentation run automatically on iPad and run in a loop?

I have built a presentation that I would loke to run in a loop without continually touching the screen. Is that possible?

Better to ask in the community dedicated to iWork for iOS. Those of us here don't all have an iPad.

HT201263 new iPad air. set it as new device. asked in itunes to restore from previous older iPad backup. it's not restored\i'm asked to do it agagin and again, in loop

new iPad air. set it as new device. asked in itunes to restore from previous older iPad backup. it's not restored\i'm asked to do it agagin and again, in loop
tried defining the iPad as new - the same problem. started it in recovery mode - the same

The definition of insanity.....
Does it ask for the old device by name? How do you know it isn't restored? Have you completed setup and checked on the device?
Are you using the same iTunes account and Apple ID?
On your iTunes account, Open preferences, go to devices tab
Look in the box for a backup of your old device. Is there a backup?
If there is no backup, you have nothing to restore.

HT4623 Updated iPad2 to ios 7.0.4. iPad restarts and wants to go through setup. I get to the "Set Up iPad" screen; it is asking to restore or setup as new iPad. I pick "Restore from iTunes Backup". I do the restore, but it loops back again to setup

the iPad seems to be in a loop between setup and restore. Not sure if I did something wrong, maybe selecting a wrong option after the ios update.

You are most welcome

How can I move a loop in Mac version. It's easy on iPad

Hi,
I just want to move a loop back and forth on the track. I can do it easily on an iPad but every time I try to move it in the Mac version it shortens or lenghthens the loop but it will not let me move the position. Tearing hair out after trying for hours to grab the loop somehow. What is the secret?
I'm using Mavericks with the latest Garageband.
Dave

Dave,
you have to hold down on the loop right on the center of the loop, not close to the ends. Then drag and hold the loop to move it.The cursor should remain an arrow and not turn into a bracket. If you see a bracket-shaped cursor, you will trim the loop instead of moving it.
Léonie

Anyone else having reset loop issues with ipad or ipad mini after IOS 7.02 update ? Based on my research it looks like this release is a total disaster for a lot of users. Locking up phones and ipads. Hopefully 7.03 will fix this mess.

My Ipad mini is in a constant reset loop since 7.02 upgrade. Did a full recover twice to Factory setting thru Itunes. That did not work. Any thoughts on this release and it's implications. Looks like many people are having the same issues.

Hi gruhland,
Thanks for your reply. It sounds like your device is actually in a restart loop, which is different from the process of a soft reset. Specifically, what I wanted you to try is this:
Resetting your device
If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
If resetting does not break the restart loop, it sounds like a different direction may be warranted here. Due to the nature of your issue you may find more assistance by using another one of Apple's support resources:
http://www.apple.com/support/contact/
Take care,
- Ari

My iPad 3 64gb is in recovery mode and will not startup correctly, stuck in the boot logo loop..

problem is iTunes wants to restore while I have no backup(i know stupid move on my part esp. since I just got back from an amazing summer trip and so....yea Ive been busy and really it is my fault. I had bought this iPad from ebay for a good deal tho it did have some physical damage and a small glitch. I had it for a year now and it was working just fine up until a couple of weeks ago. I think my kid brother tried to update to iOS 8 and it caused it to do what it is doing now. I heard people have been able to get to of the loop without restoring. I'm a college student and so I've had little time to work on it. I tried a few ways using wondershare and some other program but nothing has worked. I'm really trying to avoid restore on iTunes so if you guys can help me get my iPad back to normal that would be great!!
If I do restore and then (I'm sure) it will delete all my pics (which is what I'm most worried about) then will there be some way I can get them back using a program like wondershare dr phone?? I am especially asking those who have experience with this. if it is a bit complicated, do you think I should take it to some professional they'd be able to take care of this problem?
thank your for your time! i do appreciate it!!

I checked more than once.. sometimes I turn it off for different reasons
what ***** is I planned on uploading the pics but then this happened..I'm not sure why it even went into the apple logo loop. I heard you can get out of it but I tried a few problems and was unsuccessful. If you or anyone have knowledge of any programs I could use I'd greatly appreciate it
thanks for your response!!!

IPAD 2 is wiped and in endless restore loop with 5.1

I downloaded and installed iOS5.1 about 7 hours ago after being prompted on both my iPad2 and iPhone4S via WIFI. No problem with the iPhone,works great. However, when the iPad rebooted it told me I needed to restore the device, which I attempted to do so over a dozen times on two differnet PC's (office and home) and each time I get an error "The iPad "iPad" could not be restored. An unknown error occurred (1)." I have checked many forunm and sites for help. I tried everything that Apple and other posts suggested but no luck at all in the endless restore loop.
I am really shocked that Apple would release this IOS 5.1 disaster out with any real help or guidance. The worse part is the erasure of all data on the device, including the device name. The ITunes window can't even identify the capacity or serial number. What a cluster.

In case anyone was wondering how this was resolved, I had to ring Apple Support. Secondly, this problem was compounded by the fact that I only backed up to the Cloud, not my PC. Stupidly, on my iPad after it lost all it's data, I clicked on 'sync to the Cloud', which overwrote my good backup.
I had to set my iPad in iTunes up as a new iPad, and move everything back over. From now on I am only going to sync to the PC.

Can you set a .mov file to loop for ipad?

Spent now hours trying to get clips to loop when viewed on a ipad... it shows fine in explorer or on my Mac but on the ipad it will not autoplay or loop
Tried this
<video src="http://linktovideo.mov" width="576" height="576" controls="controls" autoplay="autoplay" loop = "loop" qtnext1="goto0" controller="false" kioskmode="true"></video>
But does not work for me any ideas or is it just not possible?

From : Safari HTML5 Audio and Video Guide
Warning: To prevent unsolicited downloads over cellular networks at the user’s expense, embedded media cannot be played automatically in Safari on iOS—the user always initiates playback. A controller is automatically supplied on iPhone or iPod touch once playback in initiated, but for iPad you must either set the controls attribute or provide a controller using JavaScript.
Read this too : Preparing Your Web Content for iPad
Here's what you can do : HTML5 Video
Here's an advanced way of showing movies : Culture Club - Movies

HT1414 ipad. Settings / subscription & Access / after being asked to enter password and doing so it is now in a loop with the circle going non-stop. Switching off tapping anything nothing changes. I am a Telegraph subscriber and this is involved with tt

My ipad is locked in a loop. in the subscriptions area validate I entered the correct password but ipad is still in a loop the circle never stopping even after switch off of every kind and over a day.. ipadi s now uselss. How can I recover?? Joan.

Hi egualmente73,
If you haven't already done so, does restarting or resetting the iPad help the issue?
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If not, we may want to restore your iPad using a computer with iTunes.
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
If you are unable to restore your iPad, try placing it into recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

Loops iPad

Similar Messages

Maybe you are looking for