Loops not appearing in loop browser, why?

I just got a new 20 inch iMac. I used Migration Assistant to help transfer the contents of my old G3 iMac DV SE from 2000. I was not running Garage Band on that computer.
When I open up GarageBand on my new computer and then click on the loop browser, it gives me a dialog box that says something like: "No Apple Loops found. Please reinstall... yada yada." So, then I looked at a GarageBand article and saw that you can drag the loops into the browser. Well, I found a folder on my hard drive that said "Apple Loops" and it has 1,198 .aif files in it and dragged them into the browser. The progress bar said that it was importing the loops. Then when it was done, the loops were still not in the browser and it gave me the same "No Apple Loops found" box. What is going on?
I had Final Cut Express preinstalled at the factory when I ordered this iMac. There is another folder with Soundtrack Loops. Could this be affecting GarageBand?
I just want to get my loops into the loop browser. How do I do this?
Also, I got discs that have the OS X reinstall on them, and Final Cut Express reinstall, but none with iLife. Was I supposed to get that disc too since it was preinstalled?

http://www.bulletsandbones.com/GB/GBFAQ.html#noloops

Similar Messages

  • Saved audio in ALU, though loop not appearing in loops browser

    I am following David Dvorin's Beyond the Basics and am up to the part about Apple Loops Utility.
    In it he uses an imported audio file called Chimey Guitar, the whole point is to use ALU, use its functions and then save it as an Apple Loop.
    When I have saved, it doesn't seem to be in the loops browser, it's not there.
    I followed the instructions fine.
    Any feedback would be great

    I see what you mean, I located it in the Finder menu and then added/dragged it to the loops browser (no probs). In the finder menu it had it down as an Apple Loop in the 'kind' column, but I suppose you have to actually drag it over to get it in the loops menu?
    In the loops browser it had the bpm as 120 (this was the original bpm of Dvorin's file/loop), though in the exercise we change the bpm to 110 on the bpm slider and pressed save. Shouldn't the loop say 110bpm in the loops browser? Considering that it is an Apple loop does it even matter?
    You've lead me on to something else here, whats the difference between using the APU or using the route of Region > Add to Apple Loops Library? (I understand that APU is for audio).
    Is APU more detailed, in the sense that you can do transients? (I read the ALU manual theres a bit of stuff about Soundtrack Pro (which I don't use)).
    Do you ever use APU?
    Anyway, its most appreciated that you got back!
    Logic and its ways are all falling into place its just these itsy bitsy Logic things.

  • Emails sent on my ipad do not appear on my macbook; why?

    Emails sent on my ipad do not appear on my macbook; why?

    Be more specific. What type of email account, IMAP, POP, Exchange, iCloud etc.?
    Or, are you saying you send email from your iPad to yourself at some other email account and you can't get this email on your computer in your computer's email client?
    Or, something else like email won't sync across multiple devices?

  • Why do my 3rd party loops not appear in the "Loop" tab?

    I have saved some Magix wav loops into the local apple users directory of Logic Express and though I can find them using the media browser they do not appear in the loops tab listing.
    Does anybody know the cure for this?

    If you drag your .wav loops into the arrange area do they function properly?  If not, you may need to convert them using Apple Loops Utility.  After doing that you can drag the folder with the .aiff conversions onto your loops tab to import them.
    You might find this old thread useful:
    http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=37200

  • IPhoto images will not appear in Media browser

    After updating my iLife apps (iLife '09), iPhoto images no longer appear in my media browser. In iMovie, it just says "Loading iPhoto Images", but never does. I am using a Macbook with OS X 10.5.8 and 2 GB memory. Images will not appear in iDVD either. Anyone have any thoughts?

    Do you still have the old library? Rebuilding it with iPhoto Library Manager would preserve most of your work.
    This will creates a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

  • Parts of Horizonal Navigation Bar Do Not Appear In the Browser???

    Hi,
    When I added 'Contact Us" to Horizontal Navitation Bar it appears in the browser.
    There is No Negative Offset.
    Cheers,
    Dreamer101.1

    Rather than attaching only the html page, can you upload to a server and give us a link?
    How did you add the new menu item? Did you use the Properties Inspector after clicking on the blue tab of the SpryMenuBarHorizontal in the Design View? Or did you just type it into the code.
    If you just typed it into the code, check to make sure that the appropriate classes are added (imitate one of the other menu/list items), because the new item won't function properly without them. No harm in typing them in yourself.
    Beth

  • I have CS5.5.  I want to create a QR Code with InDesign. Videos show it to be easy from an Adobe training video from the Object menu option. This does not appear in my version, why not?

    I have CS5.5  this video demonstrates how to create one. http://tv.adobe.com/watch/creative-suite-podcast-designers/how-to-create-qr-codes-using-ad obe-indesign-cc/
    However, no matter what I do the menu option demonstrated in the video is not listed.  Anyone know why?

    Take a read through this thread, it includes a few options down through it.
    [Ann] QR Code for InDesign CS4 and up
    Mike

  • Aperture library does not appear in Photos browser of FCPX. Why?

    I can't figure out how to make FCPX photo browser to show my Aperture library. Apple support tells: open photo browser and you will see all your aperture libraries. But my photo browser is empty. I searched the web, this forum and did not find the answer. Any suggestions?

    Thank you very much Luis Sequeira1 and Skyking.
    I tried it and it worked.
    Just strange that you should do something which is not listed in the official manual.

  • Movie does not appear in Media Browser

    I attempted to share a large movie file via Media Browser. It's about two hours of photos, movies and music. My iMac spent about 8 hours rendering (not sure if that's the correct word) overnight. All appeared well this morning, but in the Med Browser it says my movie has not been prepared for sharing. In the iMovie Projects folder, I displayed Package Contents. The folder within that for Movies had no apparent content though the Get Info shows it to be 11+ GB.
    Any thoughts greatly appreciated. Thanks.

    Have you read 'Preparing your Final Cut Express or Final Cut Pro movie to work with iDVD' at http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6652.html
    Note it ends by saying "A QuickTime file that references your Final Cut Pro movie is created on your hard disk. This is the file you will add to your iDVD project. When you are ready to add it to your iDVD project, you can simply drag the file from your hard disk directly into iDVD. "
    It also applies to Final Cut Express.
    That's what you need to do - drag the file from your hard disk directly into iDVD

  • Spouse name sometimes does not appear on printed labels - why?

    Last year, this forum helped me figure out how to get spouse names onto my Christmas card labels. Thanks! This year, I want to fix a tiny problem that came up last year. For some reason, about 10% of the labels do not include a spouse name, even though I have included the spouse's name in the 'spouse' field on the address card, in the same way as all the other cards. There does not seem to be any rhyme or reason to why some of the records will print with a spouse's name and others don't.
    Any thoughts?
    Our solution last year was to hand write the labels for the envelopes that were incomplete. This year, I thought I'd spend at least a few minutes trying to solve the problem before resorting to that.
    Thanks!

    I have experimented with this a great deal, with great frustration.This is indeed a very bug ridden area of Address Book.
    For instance, try the following: pick one of the spouses (similar problems exist when using partners) that won't print, then edit the spouse's name by inserting a period (.) at the front. E.g. change "Larry Stewart" to ".Larry Stewart", then see if the spouse's name appears on a label. Most of the time mine would, but if you take the period out again, you guessed it: no label. What kind of sense does all THAT make????
    Also, be aware that the main contact must have both a first and last name.
    When working properly, contacts and spouse with the same last name print as "Joan and Larry Stewart." When the last names are different, as typically with partners, you get "Joan Armatrading and Larry Stewart." Quite nice....except when it doesn't work at all, which for me has been about 50/50.
    I came on here today to find out if anyone knows of any downloadable or hard copy documentation for Address Book so I could see if there is an actual spec for entering data to print these kind of labels. Sometimes Apple has tech notes about stuff. Has anyone seen or heard of anything like this?
    Thanks, Patrick

  • Home Page View does not appear in IE Browser History

    Home Page Views in our High Interactivity FINS Application are not being added to the IE6 Browser History.
    Add to History = True
    I am able to get it to appear in the history if I do About View...

    Try repairing IE: http://support.microsoft.com/kb/318378
    You CAN'T download Flash Player ActiveX for Win 8 from here. There's a Windows Update KB patch that prevents it.

  • Right Side Red Line will not appear for full browser width.

    I had my top navigational bar set up to fill in a 100% browser width. Now, only the left side red line will appear and the right side will not work.
    http://waketestbykerry.businesscatalyst.com/index.html
    Any ideas on how to fix this?

    Ah, I understand now. Menus will stretch to 100% browser width in terms of any background applied to the top level Menu widget, but the actual items will not be stretched or fitted at the moment. I'd recommend adding that to our ideas section so that others can vote on it. It would also help if you clarify what you'd expect. Would you want the menu items to grow, or the space between them? And what would you expect if one of the menu items became too long for the container? Should the text wrap, or should it not be able to get smaller than that?

  • Some images do not appear in Nokia browser. 5630, ...

    Hi 2 all,
    I've got a problem with some images that do not showing up in Nokia browser. This is a major problem that randomly occurs with different Nokia handsets.
    Please check the .html page in the attachment.
    If you open the page in PC browser, you'll see "border" image, but if it's opened on Nokia 5630  (or E71, N95) page is blank.
    It would be great if you could suggest any workaround for this.
    Nokia 5630
    OS v. 012.020
    Custom v. 012.020.C04.01
    Thanks in advance
    Attachments:
    page.zip ‏16 KB

    Sorry, I didn't make myself clear.  I'm using a new Wordpress theme that is meant to be responsive.  The large image is for a header, than you scroll down to see the rest, one by one.  Some one the pages work OK on my iPad, typically the old ones where the maximum image size was 500 x 500.  It's the new pages and those I've updated that are causing the problem.  On the iPad the large image loads, then a couple of the small ones become visible as I scroll down, but then darkness (rather like my knowledge level).
    Being new to IOS and iPads, I'm trying to work out whether I should be looking here, or amongst the Wordpress stuff for a solution.
    Here's the website with its new theme: http://www.new-zealand-pictures.com/

  • Site not appearing correctly on browser or on iPhone

    Hi everyone,
    I have a site - http://www.amsivertson.com - if you go to the "photography" page, you'll see my problem. (tested in current versions of Firefox & Safari and on iPhone 3G)
    1.The text on the site can't be selected in order to copy/paste
    2.Try clicking and dragging on it and you'll see it follow your cursor as if it's an image -- and sometimes you'll notice it loads progressively like an image as well
    3. if you view it on an iPhone, all that appears are the first couple of headings, and then only the links - no other text - it actually appears as a large empty square - like an image that isn't fully downloaded - but any links appear where they should and function correctly.
    Any thoughts?
    Cheers,
    Aaron

    Aaron:
    1 - the reason the text box has been converted to a png file is possible caused by using non-web safe fonts, a drop shadow or some other enhancement to the text or box itself. Open iWeb's preferences and check the option to show text imaging indicator. Then any text box which will be changed will show this:
    Also consider using only Web Safe Fonts which will make viewing of your site on other platforms more uniform.
    2 - can't help you much with the iPhone issue but set the page width to 980 which is the iPhone's width in pixels. Any thing less causes problems I'm told.
    OT

  • The bookmarks button does not appear in my browser

    The button is supposed to be next to the home button, but it is not there

    You only see that button on the Navigation Toolbar if the Menu bar is hidden (View > Toolbars).
    If the Bookmarks Toolbar is visible then the button is displayed on that toolbar.
    Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily if the Menu Bar is hidden.

Maybe you are looking for