Loops not in browser

Trying to load loops into loop browser, garageband says " loops not in garageband format will not be displayed in browser' - this has not happened before.
aiff files were shown, how to get browser to show aiff loops?
thanks.
4bs.

Hangtime,
this is all a bit much for me; GB on my laptop (G4 PB ) accepts these loops, and GB on my PB is currently running as should. The problem occured when I copied the song over to my mates G5, so I could ( supposedly ) enjoy the benefits of G5 power and speed. All that happened was a series of errors as the copied song ( which still opens ok on the PB ) such as not finding files etc; From here things got worse as I tried to reload loops and at first it all worked, then loops not recognised, and then finally, loops will not show in browser.
I have a copy of the song bsck on my PB and it loads runs and sees loops just fine; plus, all the loops load into GB and are seen.
End state is that I have a prope running GB with all loops on my PB, but my mate now has a non working GB on his G5
4bs.

Similar Messages

  • Loops not appearing in loop browser, why?

    I just got a new 20 inch iMac. I used Migration Assistant to help transfer the contents of my old G3 iMac DV SE from 2000. I was not running Garage Band on that computer.
    When I open up GarageBand on my new computer and then click on the loop browser, it gives me a dialog box that says something like: "No Apple Loops found. Please reinstall... yada yada." So, then I looked at a GarageBand article and saw that you can drag the loops into the browser. Well, I found a folder on my hard drive that said "Apple Loops" and it has 1,198 .aif files in it and dragged them into the browser. The progress bar said that it was importing the loops. Then when it was done, the loops were still not in the browser and it gave me the same "No Apple Loops found" box. What is going on?
    I had Final Cut Express preinstalled at the factory when I ordered this iMac. There is another folder with Soundtrack Loops. Could this be affecting GarageBand?
    I just want to get my loops into the loop browser. How do I do this?
    Also, I got discs that have the OS X reinstall on them, and Final Cut Express reinstall, but none with iLife. Was I supposed to get that disc too since it was preinstalled?

    http://www.bulletsandbones.com/GB/GBFAQ.html#noloops

  • Some loops not showing.

    i installed gb3 on top of gb1, i found almost every loop appears twice in the loop browser. i then trashed the old "apple loops for garageband" folder and the old "apple loops index" folder.
    after that, problem solved, but some loops are now missing in the loop browser. i've checked, the "missing" loops are still in the loop folder.
    why would that happen?
    how to solve?
    k.

    Make sure Keyword BRowsing is turned off in GB's prefs. Also any loops not in the same time signature as your song won't be displayed.

  • HT201496 Hai there. I am facing trouble with my garageband apple loops.i don't see apple loops in my browser since quite some time i don't know what has happened to it and how it happened . i just wanted to learn some of basic things about music.can you h

    Hai there. i am having a trouble with the garage band apple loops to get into my macbook pro. . i had it some time back and i dont know where it has gone and how it get it back. is there anyone to help me to get the loops back into the browser . i will be grateful to you if some one can help me with it/ thanks.

    First check, if you do not accidentally have hidden or filtered your loops:
    Uncheck the "Filter for more relevant results" option in the Audio tab of the GarageBand Preferences.
    And the drop down menu on top of the Loop Browser should be set to "Loops", not to some Jam Pack or other collection.
    If you still don't see any loops, check if you have set your project to a special signature, like 9/8, for that no standard loops do exist.
    Then check, if any loops actually are installed in your system Library: Depending on your GarageBand version you should find the standard loops in the Audio folder of your system Library (Application Support > GarageBand):
        Your System Drive > Library > Audio > Apple Loops
    If the Loops are installed, but GarageBand does not show them, you need to rebuild your Apple Loops Index: See the FAQ for how to do it:
    Re-Index GarageBand's Loops
    This requires two steps:
    erase the old Apple Loops Index by deleting everything in
    Your System Drive > Library > Audio > Apple Loops Index
    and then rebuilding the Loops Index by dragging the folder containing all of your loops onto the Loop Browser in GarageBand.
    If no Loops are installed in your Library, you will have to restore them from your Backup.
    Regards
    Léonie

  • Open doc file in msWord but not in browser

    JDev 11.1.1.6.0
    My requirement is similar to that in https://forums.oracle.com/thread/2327005 but in 11g.
    The user has almost done it in making changes in web.xml but I am a beginner and I don't know how to make this happen on click of a command button or a command image link.
    Also, it would be nice if the doc file (new blank doc) opens in MS Word application and not in browser without making changes in browser level.

    Hi,
    if the requirement is similar and not the same its always worth spelling it out. You can reference document resources like Word from ADF by referencing the document URL from a goLink (which then allows you to set the target property to open the doc in a separate browser window or tab). If the browser opens Word, downloads the file or opens in the browser depends on the MIME type setting of the browser (e.g. can it display Word documents natively). If the document e.g is accessed from ADF through a servlet then you probably can set the Mime type explicitly to a specific one. However, it the client in the end that interprets how to process the document.
    Frank

  • When I am NOT private browsing Firefox will not allow me to delete or change the website address in the location bar. My only remedy is to open a new window and search in google then click the link to that site through google. How can I resolve this?

    Question
    When I am NOT private browsing Firefox will not allow me to delete or change the website address in the location bar. My only remedy is to open a new window and search in google then click the link to that site through google. When I swap to private browsing firefox allows me to anter the website address directly into the location bar - but this is a slow [prcess to swap back and forth - also by dint of using private browsing I loose my website information.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • IWeb pages reverting to older version- not a browser issue, deleting prefs/caches no help

    Hi everyone, forgive me if this is a newb question but I've scoured the internet for answers and all of them I've already tried with no luck. I'm using iWeb and encountering a problem that has me completely stumped. I'm trying to publish changes to my site, (I do not use mobileme, I publish to disk and upload files via Fetch) and for some reason something is changing my html files when I try to upload them. The html files are correct on my hard drive when I publish them, and yet when I upload them, they revert to the older version. This is not a browser issue, as I've cleared my cache, refreshed and tried using Safari, Firefox and Chrome with no luck. I've also tried 're-setting' iWeb by deleting iWeb preferences/cache, and tried moving the domain file from application support, creating a new website, deleting it and then re-loading the old site. Nothing, still the old site. It's new in iWeb, new when I open the html files on my drive, and old as soon as I upload.
    I seem to remember having this problem before, and what I found was iWeb's cache kept replacing my new pages with the old ones every time I wanted to upload them. 'Re-setting' iWeb did the trick then, but it's not doing it now. Any ideas on what is going on? It's a little disconcerting seeing a file correct on the disk and then change itself, while uploading, into an incorrect version.
    Using:
    iWeb 3.0.3
    Mac OS 10.6.7
    Mac Pro 2.66 Dual core

    If you make changes to a page there are files in the Scripts folder that get updated and must be uploaded also.  Depending on what you're using to up load the files it can be setup to upload just those new or modified files.
    Cyberduck is a free FTP client that works very well and if used in conjunction with this tutorial will upload only those new or modified files: #2 - Uploading only those new or newly edited and published files when using a 3rd party FTP client
    OT

  • Way to force .pdf to open in Reader and not in browser

    I saw where there was an Acrobat action called
    Convert PDF2FDF auto-save Action on the AcrobatUsers.com Action Exchange.
    which didn't work, it came in corrupted and unusable.  Does anyone know of an action or anything that will force a .pdf hosted online to open in the visitor's Reader program and NOT the browser they are in...?  No matter what browser.
    Any help you can give me with this is appreciated.   Looking for a consistent user experience here where they can fill in the information on the pdf form, save it and email it without too much hoopla.
    I am really surprised after all of the work I've put into this that this is not something that is more easily accomplished, but perhaps I am doing something wrong or don't have enough information.
    Thanks!
    Ruth

    Actions can be tricky, Are you aware that the method of encoding Actions or Batch Processes changed between versions 9 and 10 and again between 10 and XI?
    What version of Acrobat are you using?

  • Service working fine in Gateway but not in browser

    Hi All,
    I have a gateway service which is working fine in Development system but after transporting to Quality system, it is not working on browser.
    It is running perfectly in Quality gateway system but on browser it's throwing error:
                Model '' contains errors. Contact Adminstrator
    I am not even able to open metadata on browser.
    Please advise.
    Thanks.

    Hello Satya,
    The error is saying your model contains error, that means there is some problem with ur data model.
    But u also say that it works in GW Client and not in browser.
    Please try the below and check:
    1. Please make sure that the host and the port used are correct in browser. Get Host and Port info from GW Client and use accordingly.
    2. Clear your browser cache as well.
    3. Clear your model cache and try. Go to t-code /iwfnd/cache_cleanup and clear the cache and check again from browser.
    Regards,
    Ashwin

  • How can i delete search histiory, (not just browser history, j.jc

    how can i delete search history, ( not just browser h' i can do that) j.c.
    == This happened ==
    Every time Firefox opened
    == long time ago

    See [[Clear Recent History]] and http://kb.mozillazine.org/Deleting_autocomplete_entries
    See also http://kb.mozillazine.org/Search_Bar
    You can remove passwords in the Password Manager:
    Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"

  • When i edit my Pages in iCloud on a windows Machine it says not supported Browser.(Using Safari)

    When i tried to edit my iWorks on iCloud on Windows 7 machine, on Safari browser, it said not supported browser.
    I downloaded the Safari for Apple Website.
    Version of safari is 5.1.7.
    Can anyone help me on this.
    Thanks.

    Safari for Windows is not supported (or developed any more). You should use Internet Explorer 9.0.8 or later.
    See: http://support.apple.com/kb/HT5436
    Even on a Mac, you need Safari 6.0.3 or later, not Safari 5.

  • Set file filters in flex for save, not for browse

    How can i set file filters in flex for save, not for browse?
    Right now i am using filereferce class for saving purpose but i could
    not able to set filter. We can easily do it for browse.

    You can try to delete [http://kb.mozillazine.org/mimeTypes.rdf mimeTypes.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    * http://kb.mozillazine.org/File_types_and_download_actions#Resetting_download_actions
    Create a new profile as a test to check if your current profile is causing the problems.
    See:
    * [https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile Basic Troubleshooting: Make a new profile]
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See:
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • This form template is not currently browser-enabled. It must either be republished as a browser-enabled form, or opened using Microsoft Office InfoPath 2007

    Hi,
    When I try to open a Infopath related file from Sharepoint, I am receiving the below error. 
    This form template is not currently browser-enabled. It must either be republished as a browser-enabled form, or opened using Microsoft Office InfoPath 2007.
    Office Professional Plus 2010 and Infopath 2010 are installed in my Windows 7 Enterprise edition. Have executed ""C:\Program Files\Microsoft Office\Office14\InfoPath.exe" /cache ClearAll" the command. But still getting the same error.
    It works in different machine. Repaired Office 2010 and Infopath. 
    Please let me know if any solution available. 
    Regards,
    Boopathi S

    Hi,
    You can try Amit Bajaj's method in another thread which has fixed the same problem for several users:
    Check if the default “Form Templates” option in appearing under “View all site contents” page. If it is not enabled by
    default, then you can follow this following steps.
     If "Office SharePoint Server Enterprise Site Features" is enabled but we don't see the default "Form Templates" on the "View
    all site contents" page, then you should use the following steps.
    Make sure they have backup of everything.
    Opened the site http://<your site url> in SharePoint Designer.
    Select the root URL and click FILE >> NEW >> SharePoint Content
    Choose Document Library >> Form Library
    Under options type the name as “FormServerTemplates” and it will create the content.
    Now right click on “FormServerTemplate” and open “Properties”
    On settings Tab change the name to “Form Templates” and uncheck the option “Use a template for new documents”
    Click OK
    Now you should see “Form Templates” on the view all site content page.
    You should be able to publish the InfoPath form with "Enable this form to be filled out by using a browser."
    Reference:
    https://social.msdn.microsoft.com/Forums/en-US/c9617953-a54c-44ec-86cf-df215c750c18/this-form-template-is-browsercompatible-but-it-cannot-be-browserenabled-on-the-selected-site?forum=sharepointcustomizationlegacy
    Since this issue is more related to SharePoint, if above steps doesn't resolve the problem, I'd recommend you post your question in the following forum for further assistance:
    https://social.msdn.microsoft.com/Forums/en-US/home?forum=sharepointcustomizationlegacy
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected].

  • Third Party Apple Loops not being shown in Loop Browser.

    Hey Everyone!
    I posted this in the GB forum but nobody answered... maybe here someone can shed some light on this issue.
    I am a quite experienced user of GB, Logic and Soundtrack, and usually I find the workarounds for these kind of problems but I'm stumped here.
    -I've recently got 4 Big Fish "JamPacks" with a lot of apple loops (they were purchased as "apple loops" and they came in a folder called "apple loops")
    -I installed all of them in /library/audio/apple loops (this is my default location for ALL my apple loops)
    -I trashed the search indexes from /library/audio/apple loops Index (the only location where I have search indexes on my computer)
    -dropped the entire "apple loops" folder in the GB loops browser.
    -all the previously installed loops show up but only three of the new packs show up on the loop browser, the fourth one is nowhere to be found.
    I tried reindexing three or four times in different ways
    I also tried dropping just some of the apple loops of this particular folder directly on the loops browser and still no luck.
    Actually, these individually dropped loops appeared in the /library/audio/apple loops/user loops/single files folder, so GB took them. but they are not found in the loop browser.
    what's going on?
    Why other identically crafted loops in the same folder (but not the same subfolder) are indexed but not these?
    Could it be that they are wrongly formatted or not formatted at all as Apple Loops?
    How can I check that?
    Any Clues?
    Cheers!

    still nothing....
    Now I have an update: I ran some of the loop files through Apple Loops Utility and a a first glance, they are not tagged...
    Is there any good way to be sure they are/aren't formatted as apple loops?
    Shouldn't the loop browser take any .aiff file even if it is not tagged?
    I appreciate ANY input at all... I'm shocked.

  • Saved audio in ALU, though loop not appearing in loops browser

    I am following David Dvorin's Beyond the Basics and am up to the part about Apple Loops Utility.
    In it he uses an imported audio file called Chimey Guitar, the whole point is to use ALU, use its functions and then save it as an Apple Loop.
    When I have saved, it doesn't seem to be in the loops browser, it's not there.
    I followed the instructions fine.
    Any feedback would be great

    I see what you mean, I located it in the Finder menu and then added/dragged it to the loops browser (no probs). In the finder menu it had it down as an Apple Loop in the 'kind' column, but I suppose you have to actually drag it over to get it in the loops menu?
    In the loops browser it had the bpm as 120 (this was the original bpm of Dvorin's file/loop), though in the exercise we change the bpm to 110 on the bpm slider and pressed save. Shouldn't the loop say 110bpm in the loops browser? Considering that it is an Apple loop does it even matter?
    You've lead me on to something else here, whats the difference between using the APU or using the route of Region > Add to Apple Loops Library? (I understand that APU is for audio).
    Is APU more detailed, in the sense that you can do transients? (I read the ALU manual theres a bit of stuff about Soundtrack Pro (which I don't use)).
    Do you ever use APU?
    Anyway, its most appreciated that you got back!
    Logic and its ways are all falling into place its just these itsy bitsy Logic things.

Maybe you are looking for