Loops not showing up at all in Garageband.. but are on computer...

Hey,
My loops are not showing up... however I don't have my CDs with me at Uni. However, I disovered by using Spotlight that the loops are actually on the computer in a folder called "Apple Loops for Garageband". They are in my user library and the garage band preferences are set to "share loops with this user only" or whatever the option is called - suggesting that it is correct for this folder to be in the User libray and not the main library.
However I don't even have grayed out samples - they just are not there at all.
I tried dragging one or two from the folder to Garageband manually and they copied over fine and are now in the sample library... however it won't let me copy them over all in one go for some reason...??
I have a lot of samples so don't want to do them one by one... so before I resort to that - any advice...?? Whats going on?
Thanks in advance.

hey, yea i've been having the same problem, just bought this new imac, and none of the audio loops are working (they all show up gray). i actully spent the time, clicking and draging each one individually, but guess what? not all the loops are there!!! i'm sooo cofused, if anyone has figured this out, that would be extremely helpful thanks!!!!

Similar Messages

IPod not showing up at all on Mac but works fine on Windows?

I've been searching for an answer on these discussion boards for hours and have not yet found any situation that was quite like mine and I'm getting a bit frazzled and worried.
I have a 120GB iPod classic, which I've used for two years with an ACER laptop and it works perfectly. Two months ago, I switched to a Macbook Pro and synced my iPod with it; again everything worked fine. My iPod was synced with the Mac and all the new music had been transferred.
Today, I've been trying to connect my iPod to my Mac but nothing happens. It only charges (and I can't even be sure that it IS charging because the charging green sign does not show up on the iPod). It does not show up in Finder, or in the iTunes source list; it does not sync. I've reset it a billion times, restarted my mac, switched USB cords and USB ports, even downloaded and installed every software update imaginable but nothing is working.
If I leave the iPod connected to the Mac for a while, something even more alarming happens. It connects for around 3 seconds, and then ejects itself repeatedly. It's like watching someone go insane.
Naturally, I freaked out and tried to connect the iPod to a PC and it is working perfectly on the PC. Please, someone help. I have no idea what's going on.

Did you download and install the latest version of ITunes over the existing installation?
http://www.apple.com/itunes/download/
Be sure to try everything else mentioned in this article.
iPod not recognized in iTunes and Mac desktop
What if you connect the iPod in Disk Mode?
Putting iPod into Disk Mode
If the iPod is recognized okay on the PC, try restoring it there and then reconnecting it to your own laptop.
B-rock

Songs I have purchased on iTunes are not showing up in my Purchased playlist but are in my iTunes library

This has only been happening since updating my iPhone 5 to the new IOS 7.0.2 software and it has duplicated a new purchased playlist on my iTunes library. I have tried syncing the iPhone to my computer but still no luck they are not showing up in my purchased playlist.
In saying that, some songs I purchase do show up in the playlist but others don't or only half of an album shows even though I have downloaded the whole thing. It is driving me crazy!! Has anyone else got this problem and what did they do to sort it?
Thanks!

Hi samfergs,
I'm not sure how the Purchased Playlist decides what to put into it, but if you want to see all of your purchased items, then you need to go to the iTunes Store, and on the right side, under Quick Links, click on Purchased.
Then, click on the Music (or whatever other purchased items tab you want to look at). If you are looking at Music, click on All Songs, and then on "All" or "Not on this Computer" (depending on what you want to see).
Cheers,
GB

HT4759 change do not show up on all my divices like contacts

change do not show up on all my divices like contacts

Are you saying that changes to your contacts are not syncing to your other devices? If so, you need to make sure that the contacts you are changing belong to the iCloud account. To do this, open the contacts app on your device and tap Groups. Do you have any non-iCloud accounts listed, such as On My iPhone, Gmail, Yahoo or an exchange account?
Also go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section). Do you have the Default Account setting there, and if so, what is selected as your default account.

Why is my website not showing up AT ALL in Google?

I uploaded my website at the beginning of this week and it's working OK, but not showing up at all in Google. It is not so much an SEO question, because even if I google the exact website, it still doesn't show.
I have no idea what I did wrong, but I assume it's a meta data issue. What should I have filled out in the HTML for <head> box? It's blank now.
Thanks!!!

You didn't do anything wrong most likely. It takes time to get indexed. Could be months depending on how your site is optimized, your content and traffic you generate to it.

Accordion not showing up at all in IE6

I have a standard accordion set up at
www.taradeal.com/pow.html
and it works fine in Safari and Firefox, but does not show up at
all in IE6 (the initial load of the text bits flashes up, but the
Spry re-work of the code seem to fail). I'm using Spry 1.6.1,
freshly updated for DW CS3.
The accordion display a standard RSS XML.
Here's some code:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN">
<html>
<head>
<meta content="text/html; charset=iso-8859-1"
http-equiv="Content-Type">
<link rel="alternate" type="application/rss+xml"
title="RSS" href="pow-rss.xml">
<script src="SpryAssets-xpath.js"
type="text/javascript"></script>
<script src="SpryAssets-SpryData.js"
type="text/javascript"></script>
<script src="SpryAssets-SpryAccordion.js"
type="text/javascript"></script>
<script type="text/javascript">

</script>
<link href="SpryAssets-SpryAccordion.css" rel="stylesheet"
type="text/css">
</head>
<body>
... some table code
<div id="poems" spry:region="powrss" align="left">
<div id="Accordion1" class="Accordion" tabindex="0" >
<div class="AccordionPanel" spry:repeat="powrss">
<div class="AccordionPanelTab">{title}</div>
<div
class="AccordionPanelContent">{description}</div>
</div>
</div>
<script type="text/javascript">

</script>
</div>
...some more simple display, and a Google tracker
</body>
</html>
Thanks for any pointers on what's wrong.
-dan

Well, it seems to be a bug in the handling of the XML file
contents. I fixed it by changing the code in SpryData.js to force a
"manual" parse of the XML code. Not a good solution, but I don't
know the codebase well enough to find the root of the problem. I
know that the firstChild.nodeValue is "Object required" but I can't
figure out who sets that and why. Maybe no ActiveX object?
http://www.taradeal.com/pow2.html
still broken in IE6 if you want to check it
http://www.taradeal.com/pow.html
uses changed code and dynamic-data accordion works
Spry.Data.XMLDataSet.prototype.xhRequestProcessor =
function(xhRequest)
// XMLDataSet uses the responseXML from the xhRequest
var resp = xhRequest.responseXML;
var manualParseRequired = true; /*** DC for IE6 **/

Some Devices are not showing up at all in the Discovery reports

Hi all,
The first time I ran the CS device discovery I got 50 reachable devices. I scheduled the Device Discovery to be run every week. I added more subnets to the discovery but unfortunately the last discovery shows only 31 devices from the first discovered devices (50). I checked the DCR and there is only 44 devices out of the 50!
My question is:
Should not the scheduled Device Discovery discovers all devices -the previously discovered ones and the new ones-?
Why the rest of the devices are not showing up at all in the discovery reports (neither reachable nor unreachable) although all of them are pingable and responding to the snmpwalk tool from the CWLMS server.
Your kindly respond is highly appreciated.
Thanks in advance.

I ran the discovery again with the same settings after enabling debugging and I checked the following log files:
1. in the ngdiscovery.log I found a lot of errors all about Duplicate IpAddress example:
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-06 addNewDevice] : Duplicate IpAddress (127.0.0.51) found in addNewDevice().Device 1 ip = 10.8.113.29 , id1 = 127.0.0.51*F1COR.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.106 , id2 = 127.0.0.51*LCD.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-08 updateDevice] : Duplicate IpAddress (127.0.0.51) found in updateDevice().Device 1 ip = 10.8.113.93 , id1 = 127.0.0.51*UDS.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.73 , id2 = 127.0.0.51*F2COR.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-09 addNewDevice] : Duplicate IpAddress (10.8.113.42) found in addNewDevice().Device 1 ip = 10.8.113.42 , id1 = null, Device 2 ip = 10.8.113.86 , id2 = 10.8.118.251*OPS.xyz.sa*.1.3.6.1.4.1.9.1.501
2. in the CSDiscovery.log:
Error while changing the permission of the file C:\PROGRA~1\CSCOpx\objects\csdiscovery\1348\DiscoveryStatusObj
I checked the file and the casusers has a Modify permission
My Question is:
1. what is the meaning of those output exactly?
2. If CWLMS found duplicatedd IP address how it works in terms of (ignoring, updating existing devices, Adding the new devices, ... etc)
Many thanks for your help.

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
Power off the AirPort by pulling the power cord
Wait a minute or two
Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
Release the reset button and allow a full minute for the AirPort to restart
Now try to configure the AirPort again. If you continue to see the same symptoms as before, the AirPort will need to be replaced.

Calculate result as average in the report not showing average for all

Hello,
I have a calculated key figure in the query where its result should show average. I have made a setting for this calculated key figure as:
1. Calculations tab: Calculate result as "average" and calculate single value as "nothing defined"
2. Aggreagation tab: exception aggregation: Total and reference char: []
Now coming to report, BEX it showing correct average for all cells but when i run it in portal few values it is showing correct average but for few it is showing as blank. I exported this to excel then cell shows blank but cell has some values in the custom format and display values when i change the format to general from "format cells" option.
Please help me in resolving the issue- why portal not showing value for all.
Thanks,
Vijaya

SAP note solved the purpose.
Thanks & Regards,
Vijaya

HT1473 Sometimes when I copy a CD into iTunes all of the songs do not show y up in one album, but mutiple albums, all with the same name. Is there an easy way to get all of the songs into one album.

Sometimes when I copy a CD into iTunes all of the songs do not show y up in one album, but mutiple albums, all with the same name. Is there an easy way to get all of the songs into one album.

Generally adding a common album artist will fix things.
tt2

Why does the content of my emails not show on the main Mail page but does in the Inbox list of all emails?

Why does the content of my emails not show on the main Mail page but does in the Inbox list of all emails?

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

The default wallpapers are not showing up. All I see is a black screen. How do I get back default wallpapers?

Hello,
I have a problem with my iPhone. The default wallpapers are not showing up. All I see is a black screen. Can someone tell me what has to be done?

Go to the Home screen with one press of the home button. Then double press the Home button. When the Dock raises, tap and hold one of the app icons untill they all start jiggling and a red X appears. Tap the red X on the video app to quit the app.

When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

It's a bit hit and miss, Walter. Sometimes the box to enter text shows up straight away in the inspector under "text". Other times, although you click "text" in the inspector, there's nowhere to actually write anything.... then what you have to do is move the trackbar over the Title Box until you see the text boxes in the main Viewer. In the Viewer, double click a text box.... you can enter text there, but it's a bit flaky, but when you've clicked in it, you'll find that under "Text" in the inspector, the box for inputting text has magically appeared!
I'm not sure if anyone else has this trouble, but it is a bit of a pain!

How to make preflight profile witch find out if exist in document spot color with name "CutContour", if not show allert, I try many combinations but nothing works

How to make preflight profile witch find out if exist in document spot color with name "CutContour", if not show allert, I try many combinations but nothing works

Thanks very much for your help, but I'm still overlooking something. I double checked to make sure that I did not have a hidden .txt file extention. I then decided to abandon the lock on preferences idea until I get it working. I converted my mozilla.cfg file back to plain text. I made sure I do not have an extra blank line at the end of each file. The syntax looks good, as far as I can tell. I'll copy and paste what I have so far. Did I have the file locations correct posted above? Also, if you feel i can delete some lines of text in my mozilla.cfg file I'll be happy to do so.
mozilla.cfg
<pre><nowiki>//
pref("privacy.sanitize.sanitizeOnShutdown", true);
pref("privacy.sanitize.promptOnSanitize", false);
pref("browser.rights.override", true);
pref(“app.update.auto”, false);
pref(“extensions.blocklist.enabled”, false);
pref(“extensions.shownselectionUI”, true);
pref(“browser.shell.checkDefaultBrowser”, false);
pref(“toolkit.telemetry.enabled”, false);
pref(“toolkit.telemetry.prompted”, 2);
pref(“toolkit.telemetry.rejected”, true);
pref(“app.update.auto”, false);
pref(“browser.download.useDownloadDir”, true);
pref(“browser.search.update”, false);
pref(“signon.autofillForms”, false);
pref(“signon.rememberSignons”, false);
pref(“browser.download.manager.scanWhenDone”, true);
pref(“browser.formfill.enable”, false);
pref(“xpinstall.enabled”, true);</nowiki></pre>
channel-prefs.js
pref("app.update.channel", "release");
override.ini
[XRE]
EnableProfileMigrator=false
all-lmc.js
pref("general.config.filename", "mozilla.cfg");
defaultPref("browser.startup.homepage", "data:text/plain,browser.startup.homepage=http://bbc.co.uk");
Again, thank you very much for your time. Do I create my own browserconfig.properties, and firefox.js? Also, I forgot to mention I'm running Windows 8.

My images will not show in the Finder Pictures folders, but just display as jpeg thumbnails. I have to open each one to see what photo it is. This has just recently started to happen.

My images will not show in the Finder Pictures folders, but just display as jpeg thumbnails. I have to open each one to see what photo it is. This has just recently started to happen.

I made sure the 'Show Icon Preview' box was checked. This is about all I can do, really, Frank, as i don't know enough about the workings of these machines to start fiddling about.
Strangely the images show as previews in some folders, yet not in others, even though they come from the same sources (my camera and my phone).

Loops not showing up at all in Garageband.. but are on computer...

Similar Messages

Maybe you are looking for