Loose AirPort connection every time I reboot

Ever time I turn on the computer it has lost the internet connection and I have to run through the diagnostic to tell it that I am using AirPort!

I am having a similar problem, although I can't get mine to come up at all it just says: "No AirPort card installed"
This is an early 08 Mac Pro.
I tried deleting the AppleAirport.ktext and rebooting as previously described with no luck.

Similar Messages

Have to reboot my airport extreme every time i restart my PC.

Hello,
Why is it that i have to reboot my Airport Extreme every time i restart my PC? I am able to connect to the network but not the internet, unless/until i restart my base station.
My phones and tablets are connected to the internet, so i know the my ISP is not the issue.

It is impossible to work this out without lots of details.
Like what PC OS do you run?
What connection, wireless or ethernet?
What you use test with the other if possible. Does it work for example swapping from wireless to ethernet??
I presume wireless as it is the most trouble prone.. When you start the PC does the wireless connect? Do you get IP by DHCP .. if so does it match what you get after a reboot.. look particularly at dns and gateway addresses.
Is the PC showing location as home or work/public.. it must be home to work properly.. also firewall might matter.
Also what type of wireless card is used.. poor windows drivers abound.. particularly Intel cards in laptops.
Is the wireless name SMB compliant.. ie short, no spaces and pure alphanumeric?
Is the wireless password mix of only case and numbers.. nothing non-alphanumeric?

I get "There was a problem connecting to the server" every time I reboot

This has been going on for over a year I think, and it's driving me nuts. Every time I reboot my Mac Pro I get this message:
"MacBook Pro 2.6" is the name of my MacBook Pro, and as long as it's turned on and accessible via the network I won't get that message on the Mac Pro at boot. I have no idea why my Mac Pro is looking for my MacBook at launch. I've checked all of my User/Account Startup Items stuff, and there's nothing unusual there.
Anyone have any ideas on how I can track down what is wanting to connect to my other machine ever time I reboot my Mac Pro?
Thanks,
-Brian

Octo-Core-4:~ brian$ kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
com.AmbrosiaSW.AudioSupport (4.0)
Octo-Core-4:~ brian$ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfi x|x)/{print $3}'
com.autodesk.backburner_server
com.autodesk.backburner_manager
com.sharpcast.xfsmond
com.parallels.desktop.launchdaemon
com.noiseindustries.FxFactory
com.google.keystone.daemon
com.bombich.ccc
com.autodesk.backburner_start
com.adobe.fpsaud
Octo-Core-4:~ brian$ launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
com.wacom.wacomtablet
com.parallels.desktop.client.launch
com.google.keystone.root.agent
com.brother.LOGINserver
com.adobe.CS5ServiceManager
com.adobe.AAM.Scheduler-1.0
Octo-Core-4:~ brian$ ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
/Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
/Library/Components:
/Library/Extensions:
VirtualPCNetworking.kext
VirtualPCOSServices.kext
/Library/Frameworks:
.DS_Store
AECore.framework
AEProfiling.framework
AERegistration.framework
Adlm.framework
Adobe AIR.framework
ArcCon.framework
ArcSocketLib.framework
AudioMixEngine.framework
BaseFunction.framework
Cocoa2Carbon.framework
CommonDLL.framework
Compressor.framework
EWSMac.framework
FxPlug.framework
HPDeviceModel.framework
HPPml.framework
HPServicesInterface.framework
HPSmartPrint.framework
MacFUSE.framework
MagAppFramework.framework
MagCore.framework
MagImgTlsCtrl.framework
MagPCMac.framework
Maglib5.framework
MediaClub.framework
MediaServerAPI.framework
Motion.framework
NIKit.framework
NyxAudioAnalysis.framework
OpenAL.framework.zip
PluginManager.framework
ProFX.framework
ProMetadataSupport.framework
Qmaster.framework
Quesa.framework
RctXMLBase.framework
StuffIt.framework
TaskDLL.framework
WkMacLibX.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/InputManagers:
ChatFXloader
/Library/Internet Plug-Ins:
.DS_Store
DRM Plugin.bundle
DirectorShockwave.plugin
Disabled Plug-Ins
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Flip4Mac WMV Plugin.webplugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
Musicnotes
NPDjVu.plugin
NPEXVIEW
NPExView.plugin
NPVirtools.plugin
OfficeLiveBrowserPlugin.plugin
PangeaVR.bundle
Quartz Composer.webplugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
Silverlight.plugin
Unity Web Player.plugin
Unused
WacomNetscape.plugin
WacomSafari.plugin
flashplayer.xpt
iPhotoPhotocast.plugin
loading.vmo
npViewpoint.plugin
nsI4xScriptablePluginVirtools.xpt
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.CS5ServiceManager.plist
com.brother.LOGINserver.plist
com.google.keystone.agent.plist
com.parallels.desktop.launch.plist
com.wacom.wacomtablet.plist
/Library/LaunchDaemons:
com.adobe.SwitchBoard.plist
com.adobe.fpsaud.plist
com.apple.remotepairtool.plist
com.autodesk.backburner_manager.plist
com.autodesk.backburner_server.plist
com.autodesk.backburner_start.plist
com.bombich.ccc.plist
com.google.keystone.daemon.plist
com.noiseindustries.FxFactory.plist
com.parallels.desktop.launchdaemon.plist
com.sharpcast.xfsmond.plist
/Library/PreferencePanes:
.DS_Store
Apple Qmaster.prefPane
Flash Player.prefPane
Flip4Mac WMV.prefPane
MacFUSE.prefPane
StuffIt AVR.prefPane
TiVoDesktop.prefPane
WacomTablet.prefPane
/Library/PrivilegedHelperTools:
com.bombich.ccc
com.noiseindustries.FxFactory
/Library/QuickLook:
GBQLGenerator.qlgenerator
ParallelsQL.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
.DS_Store
AppleAVCIntraCodec.component
AppleHDVCodec.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
AppleProRes422.component
AppleProResCodec.component
CamTwist.component
CanonMJPEGAVI.component
DVCPROHDCodec.component
DVCPROHDMuxer.component
DVCPROHDVideoDigitizer.component
DVCPROHDVideoOutput.component
DVCPROHDVideoOutputClock.component
DVCPROHDVideoOutputCodec.component
DesktopVideoOut.component
FCP Uncompressed 422.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
IMXCodec.component
LiveType.component
MayaIFF.component
Motion.component
USBVision X.component
USBVision.component
/Library/ScriptingAdditions:
Adobe Unit Types
Adobe Unit Types.osax
/Library/Spotlight:
.DS_Store
GBSpotlightImporter.mdimporter
LogicPro.mdimporter
Microsoft Entourage.mdimporter
Microsoft Office.mdimporter
ParallelsMD.mdimporter
iMovie.mdimporter
iWeb.mdimporter
iWork.mdimporter
/Library/StartupItems:
Qmaster
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
Library/Fonts:
.DS_Store
Inkpen2
Opus
Library/Frameworks:
Library/InputManagers:
Smart Crash Reports
Library/Internet Plug-Ins:
Google Earth Web Plug-in.plugin
GoogleOneClickPlugin.plugin
Move-Media-Player.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.apple.AddressBook.MobileMeSharingAgent.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.7303EC26-3F7D-4C77-A9D2-765 2F9073811.plist
com.apple.SafariBookmarksSyncer.plist
Library/Mail/Bundles:
SpamSieve.mailbundle
Library/PreferencePanes:
.DS_Store
MouseZoom.prefPane
Opera Preferences
Octo-Core-4:~ brian$ osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
iTunesHelper, SugarSync Manager, TabMeister, Google Updater Helper
Octo-Core-4:~ brian$

Have to startup database every time I reboot Windows

Hi,
I have installed Oracle XE on Windows 2003 Server. Every time I reboot Windows, I have to logon as sysdba with SQL and startup the database.
Is it possible to have Oracle do this automatically after Windows startup?
Thanks,
Frank

Hi,
I encountered the kind of problem with my office PC , XP with 1G memory.
Sometimes when I started my computer, as what you described, the listner is on, the db is on, but if you are trying to access apex, or a normal schema rather than sys, there would be a message showing some error message, and if you login to sqlplus as sys, it will show message *'connected with a idle instance'*, and then you type startup, everything go up to normal.
I asked a few person at this forum, but not very good answers got.
But I was not like your condition now, all the time, everytimes, I encoutered this problem 2 out of 5 times I started or rebooted the machine.
First I don't know what to do, I just simply restart my pc, and it workes again, and then I found out that I can start it up manually under sqlplus as user 'sys', and I did that then.
and then, after my upgrading my memory to 2G, and I give more memory to the db xe, it works fine, the problem is gone,
So I think maybe you can try to allocate more memory to both SGA and PGA, or evern, add mor memory to your PC.(if without any other good solution).
Thanks,
Peter
p.s. memory adding is the simplest way to get better performance, on both your PC and db.
Edited by: PeterCN on Sep 17, 2008 9:08 PM

Logic asks for my serial number every time I reboot the computer. Anyone know what gives? I restored the program after a hard drive crash and now I need to enter the serial number every time. Why doesn't it remember the code?

After a computer crash I had to reinstall the whole system using Migration Assistant. The User ID is NOT the same as the original computer. And now every time I reboot the computer and load Logic the program asks me to enter my Serial Number with a "Licensing" window. Why can't the copy protection see that I have already done this? Am I missing some Pref file, or is it in the wrong location? The program works fine once I enter in the number and insert my Logic XSKey (from an older update). Thanks.

Hi!
Do you run automap 4.8/4.9? If so, then the chance is that automap is the culprit for slow undos/redos on LPX 10.1. Delete the Novation controller in the LPX controller surfaces. You find it under preferences/controller surfaces. If that is the solution for you, then uninstall automap. You find the uninstaller under applications-automap.
Good luck!

My ipad mini loses Internet connection every time it automatically locks.

My ipad mini loses Internet connection every time it automatically locks. I have to re-establish the connection but sometimes it would take too long for the Internet to be connected. I'm using a wireless connection

just browsing around I found this question. Also on my mini retina I fight with this problem. After a lot of searching I found that the only solution is to switch to
Airplane Mode, wait few seconds and switch again.
Or, if you are lucky, to find a Genius who replaces your unit. Cheers

I get a blank word document opening every time i reboot my iMac after upgrading to OS Lion.

I get a blank word document opening every time i reboot my iMac after upgrading to OS Lion. ANy ideas how to get rid of it? I have uncheked everything in mu users and groups and unchecked restore windows in the general file.

When you logout did you uncheck the Reopen windows when logging back in check box at the bottom of the logout window.

Cisco IME express 7.1.1, service crashes every time I reboot Windows

Cisco IME express 7.1.1, service crashes every time I reboot Windows
Event Type:    Error
Event Source:    Application Error
Event Category:    (100)
Event ID:    1004
Date:        12/14/2011
Time:        7:37:35 AM
User:        N/A
Computer:    ABN-WELLS-HP
Description:
Faulting application IMEServer.exe, version 0.0.0.0, faulting module unknown, version 0.0.0.0, fault address 0x00000000.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 49 4d 45   ure IME
0018: 53 65 72 76 65 72 2e 65   Server.e
0020: 78 65 20 30 2e 30 2e 30   xe 0.0.0
0028: 2e 30 20 69 6e 20 75 6e   .0 in un
0030: 6b 6e 6f 77 6e 20 30 2e   known 0.
0038: 30 2e 30 2e 30 20 61 74   0.0.0 at
0040: 20 6f 66 66 73 65 74 20    offset
0048: 30 30 30 30 30 30 30 30   00000000

Upgrade to 7.2.1 seems to have corrected problem

Why do I have to enable photo stream every time I reboot?

It seems that every time I reboot and then launch Aperture, Aperture asks me if I want to enable photostream. When I hit yes I have to re-download all of the images in my photostream. Has anybody noticed that Aperture always resets this photostream setting periodically If so, is there a known fix?

Well the iCloud compatible version of Aperture was never released to devs so that's why I posted here. originally but it might be worth asking if it turns out tha tonly devs are having this problem.
I'm running the final release version of 10.7.2 but that was upgraded from the beta release, and of course the final iCloud compatible release version of Aperture too.

Wifi drops connection every time i shut the lid.

wifi drops connection every time i shut the lid, even if only for 1 second and will not reauth with the wifi without removeing, then adding the wifi back and reauth to the network every time i shut the lid.
mbp 2011

Put the hard disk to sleep when possible in energy saving settings
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
1.     Shut down the computer.
2.     Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
3.     On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
4.     Release all the keys and the power button at the same time.
5.     Press the power button to turn on the computer.  Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Resetting PRAM and NVRAM
1.     Shut down the computer.
2.     Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3.     Turn on the computer.
4.     Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5.     Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6.     Release the keys

My iMac keeps showing an install bar every time I reboot or restart since upgrading to OS X Yosemite. This never occurred in any of the previous OS. Is this new or a problem?

My iMac keeps showing an install bar every time I reboot or restart since upgrading to OS X Yosemite. This never occurred in any of the previous OS. Is this new or a problem? I have an iMac (27-inch Mid 2010), Mac OS X (10.6.7).

they moved to a progress bag instead of the spinning gear or beach ball

Itunes play lists are deleted every time I reboot my PC

Hi there,
I've recently purchased a Sony Vaio laptop and have installed the latest version of itunes. Only problem is every time I create new playlists, itunes forgets them / erases them when I reboot! I also have to import my library every time I reboot as no songs come up. Any ideas why this is? It's a real pain as I need playlists to organise my huge song collection.
Many thanks,
Miksweety

Many Vaio owners have seen this exact problem. There is some Sony media management software that causes a conflict with itunes saving its library database file.
See Redkeefy's post here
http://discussions.apple.com/message.jspa?messageID=8537277

My audio aggregate device is not stable in Mountain Lion, it was fine before I upgraded from Snow Leopard - every time I reboot the computer it loses the configuration and so it is not available in Logic Pro

My audio aggregate device is not stable in Mountain Lion - it was fine before I upgraded from Snow Leopard. Every time I reboot the audio aggregate device (MOTU TRAVELER, MOTU PRE8 1, MOTU PRE8) has to be reconfigured so that it is available within Logic Pro.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Why is it that every time I reboot my computer I have to reload a new library since my old one is in the recycle bin.

Why is it that every time I reboot my computer I have to reload a new library since my old one is in the recycle bin.

Well I just recently downloaded the application "Whatsapp" again after I synced my new iPhone 5 to my computer and it wasn't there. So I actually went into the app store and downloaded it from that again. It didn't make me pay the .99 cents as before though. Maybe because I was already in the system. This has really agrovated me, because none of my friends that use "Whatsapp" with thier iPhones experience this problem.
Someone help please!

Why must I reinstall Flash every time I reboot?

I have WindowsXP and IE 7.
I have installed Adobe Flash Player 10.0.42.34 MANY times. It works fine, until a point that I need to reboot my computer. Once I reboot, Flash is still installed and a listed program, but no sites will open with Flash, stating it is not installed.
Only solution I have found is upon reboot I must delete my Flash and then reinstall it. Every time I reboot! I am living with it, but sure would love a solution.

LIKEWISE WHY IS THIS ISSUE BEING TOTALLY IGNORED
COME ON GUYS THIS IS NOT GOOD ENOUGH
A SOLUTION WOULD BE GOOD

Loose AirPort connection every time I reboot

Similar Messages

Maybe you are looking for