Loose DBConsole configuration when database is cloned

We recently moved to Oracle 10G and implemented the DBConsole. We have a test database that frequently gets overlaid by production. However, once the database is cloned, the console looses all its settings, and in many cases, have to be rebuilt. Is there a way to keep the Console in tact (backup settings, etc), while having the capabality to occasionally overlay the database?

Hello,
Are you using RMAN to clone? WHat do you mean loose dbconsole configuration? Aren't you able to login? Generally after clone all 3 following users generally get locked up ; DBSNMP, MGMT_VIEW, SYSMAN. Can you confirm is this the case with you? What type of setting beside backup setting you loose, jobs...? or chains?
Regards

Similar Messages

Error message when Database details are not configured properly

Hi,
I am using JDeveloper 11.1.1.1.4 and ADF-BC in my project.
I use Weblogic Data Source connection to connect to Database.
I have a requirement that when data base details are not configured properly in Weblogic Data Source or when Database is down,I need to display an error message either when I access application task flows or in login page itself when application starts.
Can I achieve this???Please advice.
Regards,
Praveen

Praveen,
Check out Steve's example
https://blogs.oracle.com/smuenchadf/resource/examples#129
-Arun

DBACockpit Configuration - Remote Database backup of Java Stack.

Hi All,
I am configuring remote database backup of my SAP Java stack system.
I have successfully connected the system in dbacockpit. I have gateway installed also on the remote host system. but Database scheduling on DB13 failed.
On the OS of CEN system, I can connect to the host system of the remote using the OPS$ logon and i.e
sqlplus /@SID as sysdba - (It connected, to confirm i querried the v$instance I was also able to shutdown the remote system)
E:\>sqlplus /@SID as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Wed May 18 15:37:46 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
But when I ran the brtools to perform the backup I got this error.
"BR0301W SQL error -12560 at location BrDbConnect-2, SQL statement:

Hi Niyi,
This is a TNS error. The system is not able to connect TNS by using br*tools.
Firstly, check your environment variables. They should be as same as java system environmnt variables.
Secondly, check the link below;
[BR0301W SQL error -1017;
You need to create a synonym and SAPUSER table for the gateway installation <sid>adm user on Java database. By doing so, br*tools will be able to connect to the java database.
Best regards,
Orkun Gedik

RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation failed Cannot execute configure of database using RapidClone

dear associates,
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance

dear associates,
can u please assist me how can over come this error or problem.
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance

Moving Configuration Manager Database to a Different Drive

Hello,
Is there a way to move the Configuration Manager database to a different drive in the same machine? We are using Configuration Manager SP1 and SQL Server 2008 R2. We are running out of disk space in drive C: Please advise what would be
the possible solution for this. Thanks so much.
Regards,
Joann

Yes, follow the SQL Server documentation for moving database files.
http://technet.microsoft.com/en-us/library/ms345483.aspx
In general, I have an easier time when I have stopped the ConfigMgr services and the IIS websites first.
Usually, then I will run the "Relocation for Scheduled Disk Maintenance" procedure.
Regards,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

Configure Audit Database in BOBJ LCM

Hello,
Can anyone please provide me steps to configure Audit Database in BOBJ LCM?
When I goto SIA properties under configuration, I have configured Audit Database and i got message saying Audit Database completed. I have enabled AUDIT in Adaptive processing server too however when I goto properties of Audit Events I am getting message as "Auditing information is not being written to the auditing database. Please verify that the auditing data source is configured properly on the CMS".
Please guide me in solving this issue...
Thanks,
Sravanthi

Hello Stratos,
Yes, this is different oracle instance. I am tried with sysdba and i still dont see Audit tables in database. I appreciate, if you have any hints on checking the Audit tables.
How do I make sure Audit database has been created? and Could you please provide me the steps to configure Audit Database.
Thanks,
Sravanthi

Configure standby database

hi all;
how many system r required to configure standby database
i m configure standby database in a single(same) system where my primary database already running.if this possible or not
i have configured my standby
but when i start "c:\sqlplus sys@orclstdy as sysdba"
then he create error ora-12154: TNS:could not resolve the connect identifier specified
and when i start with "c:\set oracl_sid=orclstdy"
sql>conn as sys/pass as sysdba
connected to an idle instance
sql> startup
ora-02778: Name given for the log directory is invalid
how can solve this problem . please reply

Hi user569791
you can configure standby to multiple destinations(up to 9 different destinations) and it is also possible to configure in same system also.
you need to create standby controlfile for Physical standby database.
check whether the standby instance run as a separate service and whether you
have an relevant entry in tnsnames.ora file. note that the db_name is same for both
sites but only the instance name differs.
Ensure that you have a
1.valid cold backup of datafiles,
2.valid standby controlfile
3.standby init parameters with db_file_name_convert and log_file_name_convert
parameters are valid
4. a special init parameter called lock_name_space need to be given when you configure standby on same site.
check all these condition and Try again.
Regards
SM

Configurations with database control

I want to do configurations with database control but when i give servername like
http://pluto:1178
i am getting error that page cannot be displayed
$ more portlist.ini
iSQL*Plus HTTP port number =5570
Enterprise Manager Console HTTP Port (test) = 1178
Enterprise Manager Agent Port (test) = 3978

Thanks its working but its not showing the options like
Home
Performance Administration Maintenance
only startup and recovery options are there
Please let me know how to enable b] Performance Administration Maintenance

Configuring Oracle database as a resource

Hi All,
I have configured oracle database as a resource in OIM following the steps given in connector's documentation.
But now when I am trying to assign this resource to a user, I am getting following error:
Response: For input string: ""
Response Description: Unknown response received
Error Details
Setting task status... *"For input string: """ does not correspond to a known Response Code. Using "UNKNOWN".*
Any idea why I am getting this error?
Thanks
Gaurav

You need to supply more details.
Are you using the Database User Management connector?
What actions are you performing?
What does the log say when you enable the logging for that specific connector.
We can't answer a problem if you don't supply the details.
-Kevin

Configuring standby databases

Hello
Is there a way to configure standby databases in gc11g ?
When I enter sys credentials, I get the below error :
Failed to connect to the database: ORA-01033: ORACLE initialization or shutdown in progress The Connect Descriptor was (description=(address=(host=prddb)(protocol=tcp)(port=1824))(connect_data=(service_name=orclprd)(instance_name=orclprd)(UR=A)))

Ricardinho wrote:
Hello
Is there a way to configure standby databases in gc11g ?
When I enter sys credentials, I get the below error :
Failed to connect to the database: ORA-01033: ORACLE initialization or shutdown in progress The Connect Descriptor was (description=(address=(host=prddb)(protocol=tcp)(port=1824))(connect_data=(service_name=orclprd)(instance_name=orclprd)(UR=A)))Do you want to create a standby standby database?
You are trying to "orclprd" - is it your primary database? Are you sure that it's open?
Regards
Gokhan

Configure OEM after cold cloning

Dear All
After performing cold cloning ,I am trying to configure OEM which shows me error message in logfile,
CONFIG: ORA-20001: SYSMAN already exists..
Do I need to drop DBSNMP and SYSMAN schema and create repos from the beginning, if yes then is there any effect on database if I drop schemas.
kindly post steps about configuring OEM after cold cloning .
Database Version : 11.2.0.1
Thanks.

I'm not sure what you mean by "cold cloning." What version of EM are you using, and what is it you want to do?

How to configure the database monitoring (DBA Cockpit) after Support pack

Hi,
I did the Support Pack Upgrade for BW system and i ran SGEN as well, now i need to configure the database , could you please suggest how to configure the database monitoring (DBA Cockpit) after Support Pack Upgrade.
Server is MSSQL , Component is SAP NetWeaver 2004s and OS is Windows NT.
Plesae suggest.
Chandu.

Hi,
You are right. SAP delivers this functionality from SP-12. So when you have applied the SP-12, you must have done these config steps to enable the DBA Cockpit.
If you have done these steps earlier, So you must have DBA Cockpit enable right now and putting extra SPs like 13, 14 and so on, should not be a matter.
Now if you have not performed those config steps before, Please do them now and you will be able to use DBA cockpit.
Please understand that SP12 is the base to run DBA Cockpit.
With Regards,
Saurabh

Callback function may be NULL only when database handles are read-only

Hi,
I am getting some errors when trying to run my java code that will try to open a few cursors and join them to fetch the data.
ath .:/usr/src/db-4.7.25.NC/java/src:/usr/local/BerkeleyDB.4.7/lib/db.jar bdbtest
MyDbs: Callback function may be NULL only when database handles are read-only
Error on inventory secondary cursor:
java.lang.IllegalArgumentException: Invalid argument: Callback function may be NULL only when database handles are read-only
What does that error mean? How can I resolve it? I am following the sample program and I can't find anything related.
Here is my code.
import com.sleepycat.db.DatabaseException;
import com.sleepycat.db.Database;
import com.sleepycat.db.SecondaryDatabase;
import com.sleepycat.db.DatabaseConfig;
import com.sleepycat.db.DatabaseType;
import java.io.FileNotFoundException;
import com.sleepycat.db.DatabaseEntry;
import com.sleepycat.db.SecondaryCursor;
import com.sleepycat.db.Cursor;
import com.sleepycat.db.DatabaseException;
import com.sleepycat.db.LockMode;
import com.sleepycat.db.OperationStatus;
import com.sleepycat.db.SecondaryCursor;
import com.sleepycat.db.SecondaryConfig;
import com.sleepycat.bind.EntryBinding;
import com.sleepycat.bind.serial.SerialBinding;
import com.sleepycat.bind.tuple.TupleBinding;
import com.sleepycat.db.Cursor;
import com.sleepycat.db.DatabaseEntry;
import com.sleepycat.db.DatabaseException;
import com.sleepycat.db.LockMode;
import com.sleepycat.db.OperationStatus;
import com.sleepycat.db.SecondaryCursor;
public class bdbtest {
public static void main(String args[]) {
SecondaryDatabase myDatabase = null;
     Database primDB = null;
     Cursor cursor = null;
try {
// Open the database. Create it if it does not already exist.
DatabaseConfig dbConfig = new DatabaseConfig();
     dbConfig.setErrorStream(System.err);
dbConfig.setErrorPrefix("MyDbs");
     dbConfig.setType(DatabaseType.BTREE);
dbConfig.setAllowCreate(true);
     SecondaryConfig mySecConfig = new SecondaryConfig();
     mySecConfig.setErrorStream(System.err);
mySecConfig.setErrorPrefix("MyDbs");
     mySecConfig.setType(DatabaseType.BTREE);
mySecConfig.setAllowCreate(true);
     primDB = new Database("/tmp/bdb_ca_db.db",
"bdb_ca_db",
dbConfig);
dbConfig.setAllowCreate(true);
myDatabase = new SecondaryDatabase("/tmp/bdb_ca_sdb.db",
"ca_sdb_res_alias",
primDB,
mySecConfig);
     String res ="in-1";
     SecondaryCursor secCursor = null;
     DatabaseEntry searchKey =
new DatabaseEntry(res.getBytes("UTF-8"));
     DatabaseEntry foundKey = new DatabaseEntry();
DatabaseEntry foundData = new DatabaseEntry();
     secCursor =
myDatabase.openSecondaryCursor(null, config);
// Search for the secondary database entry.
OperationStatus retVal =
secCursor.getSearchKey(searchKey, foundKey,
foundData, LockMode.DEFAULT);
     if (retVal == OperationStatus.SUCCESS){
          System.out.println("succ");
     }else {
          System.out.println("fail");
while (retVal == OperationStatus.SUCCESS) {
String keyString = new String(foundKey.getData(), "UTF-8");
String dataString = new String(foundData.getData(), "UTF-8");
System.out.println("Key | Data : " + keyString + " | " +
dataString + "");
secCursor.getNextDup(searchKey, foundKey,foundData, LockMode.DEFAULT);
     } catch (Exception e) {
System.err.println("Error on inventory secondary cursor:");
System.err.println(e.toString());
e.printStackTrace();
     finally {
// Make sure to close the cursor
          try {
          cursor.close();
          }catch (com.sleepycat.db.DatabaseException e) {
System.out.println("All done.");
}

Hi,
The error is because either the primary database or the secondary database is configured as read only and the callback to create the secondary keys is null. A quick glance of the code, it appears as if you did not set up the secondary database correctly. In the Getting Started Guide for JAVA API chap 10, we have detailed information on what needs to be done as well as a code example. Please refer to http://www.oracle.com/technology/documentation/berkeley-db/db/gsg/JAVA/index.html and look for Chap 10.
regards,
Mike Brey, Oracle Berkeley DB

Problem configuring TassieDB database to work with JBoss Servlets + EJB app

Hi everybody
I have been unable to get Budi Kurniawan's Tassie Onine Bookstore example (
http://benmira.free.fr/en/j2ee/sessionEJB.htm#ch29lev1sec4) application to read anything from the database TassieDB . I am not sure what is wrong. I downloaded the database from the CD. Then since this was an older version of Access, I had to let my Access convert it to the newer form.
I then configured the Database the way I thought I should in order for it to work. I created a Data Source Name called TassieDB, by following the procedure to create a System DSN on Windows. I selected the Microsoft Access Driver and associated my Database which I named TassieDB1, which I deposited under C:\budibookstore which also contains the package com.brainysoftware.tassie.servlet.ejb
When I access the SearchServlet page and type in "Computer" in the search box nothing turns up. I wonder what is going on?
The following errors are spewed out by Apache in this process:
May 18, 2005 8:27:24 PM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-8080
Starting service Tomcat-Standalone
Apache Tomcat/4.1.31
May 18, 2005 8:27:28 PM org.apache.struts.util.PropertyMessageResources
INFO: Initializing, config='org.apache.struts.util.LocalStrings', returnNull=tru
e
May 18, 2005 8:27:28 PM org.apache.struts.util.PropertyMessageResources
INFO: Initializing, config='org.apache.struts.action.ActionResources', returnNul
l=true
May 18, 2005 8:27:29 PM org.apache.struts.util.PropertyMessageResources
INFO: Initializing, config='org.apache.webapp.admin.ApplicationResources', retur
nNull=true
May 18, 2005 8:27:33 PM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-8080
May 18, 2005 8:27:33 PM org.apache.jk.common.ChannelSocket init
INFO: JK2: ajp13 listening on /0.0.0.0:8009
May 18, 2005 8:27:33 PM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=10/150 config=C:\tomcatj\conf\jk2.properties
javax.naming.NoInitialContextException: Cannot instantiate class: org.jnp.interf
aces.NamingContextFactory [Root exception is java.lang.ClassNotFoundException: o
rg.jnp.interfaces.NamingContextFactory]
javax.naming.NoInitialContextException: Cannot instantiate class: org.jnp.interf
aces.NamingContextFactory [Root exception is java.lang.ClassNotFoundException: o
rg.jnp.interfaces.NamingContextFactory]
All help is gratefully acknowledged and accepted. Thanks in advance

Hi
Did you notyfy the Exception ?
class not found Exception "org.jnp.interfaces.NamingContextFactory"
add these packages to your class path.
Vinoth

Issue in configuring Standby Database from Active database in 11g by RMAN

POSTED THE SAME IN DATA GUARD CATEGORY UNABLE TO DELETE
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.
Edited by: 895188 on Dec 21, 2012 5:50 PM
Edited by: 895188 on Dec 21, 2012 6:09 PM
Edited by: 895188 on Dec 21, 2012 6:22 PM

Hello;
Script has to be run from auxiliary.
Great details, but what I don't see is how you connect in RMAN.
Example
Start RMAN
$ORACLE_HOME/bin/rman target=sys/@recover2 auxiliary=sys/@reclone
Recovery Manager: Release 11.2.0.2.0 - Production on Wed Feb 22 14:50:31 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: RECOVER2 (DBID=3806912436)
connected to auxiliary database: RECLONE (not mounted)Nothing in your tnsnames or listener jumps out as wrong. I copied them into my text editor and compared against my working ones.
Generally for active duplication I start the future standby on a pfile NOMOUNT.
Auxiliary Instance Initialization Parameters Needed :
DB_NAME
CONTROL_FILES
DB_BLOCK_SIZE
( add extra parameters like DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT instead of using the SET command - clean up standby spfile right after duplication )
Then start RMAN and finally run a single line duplication command.
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
RMAN>duplicate target database for standby from active database NOFILENAMECHECK;Best Regards
mseberg

Loose DBConsole configuration when database is cloned

Similar Messages

Maybe you are looking for