Loose iphone clip audio half way through
Hi all...
I am putting together a movie in imovie consisting of video from my camcorder with clips inserted from an iphone 5 Just noticed, the iphone 5 clip audio just stops about 25% of the way through. Plays fine on the iphone.. I delted the clip from my project & re imported.... same issue
Any advise?
D
Same issue here. This is the 4th post I've found on this problem today from searching the forums.
Similar Messages
-
I have many songs on my iphone that play half way through and then the sound just stops, when I look at my phone the song is still playing, just no sound. Any help on how I can fix this?
Could be a defective SIM. Try a new one from your carrier.
-
HT4623 iPhone restore stuck half way through time remaining
Hi,
I updated my phone to IOS 6 which then required a restore. I have attempted this multiple times but keep getting stuck about half way through the restore with time remaining going up to 12hrs or more. Can anyone help?
ThanksI imagine a ton of people are attempting to activate after the update, and the server is getting overloaded. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.
-
I am trying to update my iphone and once it gets to the restoring process I get " An error occurred while restoring this iPhone (-20)". Once I hit ok I get "iTunes could not restore the iPhone " " because the backup was corrupt or not compatible with the iPhone that is being restored". But about a month ago we updated another iphone we have same model. Can someone tell me what to do or how to fix this?
Are you running modified software on your phone? This error seems to be common if the firmware has been modified and you're trying to restore the phone again.
-
CS 5.5 loses audio in clip half way through.
I've imported an AVCHD (MTS) clip into PP5.5. It plays fine thru vlc and quicktime, but once imported it loses the audio half way through. Any ideas?
1st Read Bill Hunt on Audio Conforming http://forums.adobe.com/thread/726693
2nd Metadata contained in folder http://forums.adobe.com/thread/1015001?tstart=0 -
Audio stops half-way through clip
Audio on movie clips stops half-
way through. This isn't downloaded music, but rather the background audio of the clips. Any suggestion
s?The footage appears the same from the Sony.
The full audio plays in the Organizer and from the clip in the project panel. The waveform shows for the entire length of the clip in the timeline.
I didn't see the blue progress bar you spoke about, but the program just went through the process of importing the clips and then the organizer opened.
Thanks. -
Anyone have an idea why clips imported are silent half way through the clip? The entire audio can be heard in quicktime.
Solved problem by converting to another file format.
The two that worked were .mov and MP4 that is .H264 -
Audio doesn't match video because repeated half way through
Hi guys,
I am currently editing videos from my Canon SLR with Adobe Premiere Elements (Windows).
In the same project, I have only uploaded videos taken the same day with the same equipment. I have been able to process them all normally apart from one. For some reason, when I play this file with a basic video player, everything works fine but when I import it in the Adobe software and play it either through the small window or in the timeline, I have the same problem:
Everything works fine (audio and video in sync), until it reaches a specific point (totally random as far as I can tell) when the video keeps going but suddenly the sound repeats itself from the beginning of the file (and the audio which would correspond to the video is replaced by it). For you to understand better the problem:
Video: ABCDEF
Audio: ABCABC
I have tried opening it in a different project and somehow it happens exactly at the same point.
I am totally clueless of what it comes from and getting really frustrated!
Any idea?
Cheers
BabsHello, I'm new to using forums like this. Is it appropriate for me to post that I'm having the same issue? Also sounds similar to Audio doesn't match video because repeated half way through as well.
My situation is:
Win7 64-bit, i7 920, 2.67GHz, 8GB RAM
Multiple Nikon D7000 video clips I've taken play back fine except for the following clip. In Windows Media Viewer, I have no problem, but in PE10, in the timeline editor, this clip repeats the audio from the beginning starting about 6 minutes into the video. I have Quicktime version 7.7.5 installed which I noticed was mentioned as a possible culprit in the other thread.
I've been using my camera primarily for stills, but decided to have my mom tell her story before she wasn't able to. I'm so frustrated with this problem because I know the audio is just fine since I can play it back synchronized throughout the entire clip in WMV. I've tried cleaning out PE caches as best I can figure them out and created new projects without any better luck.
Any help would be greatly appreciated. I'm open to getting a new version of PE or another program if I could believe that I wouldn't run into this issue again. This seems like such a vanilla problem since all my other clips seem to be fine and this one does too on WMV.
Thanks for any help you can provide. I don't really know where else to go to figure this out.
Joel
My Premier Elements Project settings are:
Editing Mode: DSLR
Timebase: 23.976frames/sec
Video:
Framesize: 1920 x 1080
Pixel Aspect Ratio: Square Pixels (1.0)
Fields: No Fields (Progressive Scan)
Display Format: 24fps Timecode
Audio:
Sampe Rate: 48000 Hz
Output from MediaInfo
General
Complete name : Z:\NikonVideo\MomsStory\JDB_20140702_6537.MOV
Format : MPEG-4
Format profile : QuickTime
Codec ID : qt
File size : 1.46 GiB
Duration : 10mn 32s
Overall bit rate : 19.8 Mbps
Encoded date : UTC 2014-07-02 18:22:46
Tagged date : UTC 2014-07-15 03:24:05
NCDT : NCTG
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 10mn 32s
Bit rate : 18.3 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.368
Stream size : 1.35 GiB (92%)
Language : English
Encoded date : UTC 2014-07-02 18:22:46
Tagged date : UTC 2014-07-02 18:22:46
Transfer characteristics : BT.470 System M
Matrix coefficients : BT.601
Audio
ID : 2
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : sowt
Duration : 10mn 32s
Bit rate mode : Constant
Bit rate : 1 536 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 116 MiB (8%)
Language : English
Encoded date : UTC 2014-07-02 18:22:46
Tagged date : UTC 2014-07-02 18:22:46 -
Audio cuts out half way through video after conversion.
I just put together some video clips I've shot into a single video, then ran it through conversion. Half way through the completed video, the audio cuts out for the rest of the film. Yet in iMovie, it's still there. I've converted twice and it cuts out in the same spot. Could corruption in a single clip, kill the audio for the following clips? Since it takes hours to convert, I thought I'd ask before deleting the suspect clip and starting again.
I've spliced together clips before without problem, using the same camera source.
Thanks.
CheersI figured a work-around. From the clip where the audio cut out till the end, I dragged those clips to a new iMovie project. After converting, the sound was intact for that portion. Then I opened the complete version with audio cut-off in Quicktime Pro. Deleted the the half with audio loss. Then joined the new half I just created. Voila!
Only when I went to post the video on my vlog, did my Internet connection die (Comcast strikes again). -
I have just been watching (The Adjustment Bureau) a rental movie and about half way through the audio cut out, I tried rerunning the chapter but still the same problem so I tried the restoring function and now I have lost the 48 hrs viewing of the movie. So how do I get the movie back without paying for it again and is this problem likely to reoccoure and if so how do I rest without loosing the movie?
Hi David.
This must be a glitch in the movie file on the iTunes server because my husband and I just reached the same point in he film (The Adjustment Bureau) and no audio! Totally cuts out and doesn't come back in. We tried the same - turned off, signed out, and also couldn't see the rental in the menu... Sign out, sign back in and click 'Check for rentals' in the 'General' menu just under where you signed in.
It may come up with a negative 'no more rentals can be found' or similar but go back to the main screen and check anyway. It should be there. -
I've downloaded the ios7 software to my iphone but it didn't let me install it over air so I connected my iphone to itunes and updated it .. it's now stuck half way through saying 'updating iphone software' it's been like that for 40 mins .. should I be worried?
I imagine a ton of people are attempting to activate after the update, and the server is getting overloaded. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.
-
i have been trying to update my iphone and when i tried to do so it said i needee to restore it first so tried this and since my phone just has the usb icon and itunes showing on it wont turn on or anything and half way through restore it comes up with an error message saying it cant complete it anybody know how i fix this please doin my head in
We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?
-
my iphone 6 wont go past the start up screen (white screen with black apple) iv treid restoring it on itunes but it disconects its self half way through. what can I do
Did you try to use recovery mode, explained in this article?
If you can't update or restore your iOS device
If it does not work after that, you'll have to get it serviced:
iPhone - Contact Support - Apple Support -
Making simple cross desolves at the end of still photo clips from my library.
Not making a clean disolve between clips.
Single frames from the previous clip are flashing half way through the desolve.
Did both a drag and drop and insert disolve.Making simple cross desolves at the end of still photo clips from my library.
Not making a clean disolve between clips.
Single frames from the previous clip are flashing half way through the desolve.
Did both a drag and drop and insert disolve. -
cannot update and download ios 5 to iphone 4 or ipad...everytime i try i get half way through a 2 hour download for it to say "network connection timed out" what do i do to download
When you get anything that says your network connection timed out it either means you lost internet connection or there is something blocking the connection between the computer and the servers that it is trying to connect to.
If you have a solid internet connection and can browse to websites fine it's either an anti-virus program or a firewall on the computer OR a firewall in the router's settings that you use to connect to the internet.
Reconfigure any security software to allow Apple's servers to pass.
Useful information for configuring your security software:
IMPORTANT: iTunes must be allowed to contact Apple using the following ports and servers:
▪ port 80
▪ port 443
▪ phobos.apple.com, deimos3.apple.com, albert.apple.com, gs.apple.com, itunes.apple.com, ax.itunes.apple.com, ax.init.itunes.apple.com, ax.phobos.apple.com.edgesuite.net
iTunes uses well known ports and these ports may need to be opened for iTunes: 80, 443, 3689, 5297, 5298, 5353, 8000-8999, and 42000-42999.
iTunes also contacts VeriSign servers during an iPhone restore and activation:
▪ evintl-ocsp.verisign.com
▪ evsecure-ocsp.verisign.com
For more information see Update and restore alert messages on iPhone and iPod touch
Temporarily disable or uninstall your security software
If the current available version of your security software is incompatible with iTunes, you can disable the security software and test if it is the source of the issue. It might also be necessary to temporarily uninstall security software after making sure you can reinstall it and note any required licenses. A temporary deinstallation might be required because parts of some security software remain active in the background though they appear to be deactivated.
To reduce any security risks that security software is designed to prevent, consider making sure all files needed to reinstall it are available and disconnect network connections before uninstalling security software. Should this not be possible, such as if a download without active security software is required, that required step should be the only process completed without security software. For assistance in checking your configuration, disabling, or uninstalling your security software, please contact the manufacturer.
Once disabled or uninstalled, perform only the steps required to verify your issue has been resolved. Complete whatever update, restore, syncing, back up, activation, or other task you were troubleshooting. Once that task is complete, install and configure compatible security software to ensure your PC is protected.
If it isn't a program or software on the computer contact your Internet Service Provider and/or Router Company to configure or disable the firewall in the router settings.
To isolate the issue to this you can also try disconnecting the router and plugging your computer directly in to the modem but this does not help for troubleshooting time-out issues directly on any apple mobile devices only if you are syncing or going through iTunes on the computer.
Maybe you are looking for
-
Download internal table to excel with header
Hi All, I have a requirement to download internal table contents to excel with field headings. I tried searching in forums before posting but didn't got much help. I have used GUI_DOWNLOAD, WS_DOWNLOAD and EXCEL_OLE_STANDARD_DAT. But unable to downlo
-
ITunes with Aiport Express on Windows 7 x64
Since I installed Windows 7 x64 RTM, I have had stuttering problems when connecting to an Airport Express to play music. When I only play the audio on my computer, it plays fine. When I connect to an Airport express (either by itself or with multiple
-
Define & describe "Noise Gate" Effect for Real Instrument
Newbie question: Can someone do this, or point me to a good discussion of the use of the Noise Gate effect? I searched for this term throughout the GB forum and found very little. I see that it dampens sounds at specific decibel levels, but how might
-
Hi- I created a slideshow with custom playlist in iPhoto. How/where can I publish to share with friends?? Thanks!
-
Request Tips for Setting up Test Modules (HRMS, AR, AP) in R12
Hi I am fairly new to Oracle Financials and recently installed R12 on my linux box for trying and testing. My question may sound silly to many but please bear with me. After Installation I could login with SYSADMIN account and I can see Oracle E Busi