Loose my audio and video scenes when editing

I am using two extrnal hard drives. One is 500Gb and the other is 1Tb. With these plugged in and while using final cut pro, I loose my video scenes in the clips while editing and in the browsing menu. They will be there at the start and as soon as I add in a clip or something, they just dissapear and don't return. It is impossible to edit scenes when I cant see the video that is in that clip on the timeline. This is the same for audio and music clips also. I was looking into buying one new 3Tb Extrnal hard drive with a bigger data buffer and disk speed and transfering all my footage to that drive. Would this solve my problem? What would? I can take a screen shot of the problem if needed. Need help! Thank you!

The only thing I can suggest when weird things start happening is to trash the preferences with this free app
http://www.digitalrebellion.com/prefman/
Spending money rarely cures severe problems as they are more likely to be caused by user error or some application/computer configuration problem.

Similar Messages

Poor audio and video quality when in conference

I have a customer with poor quality in audio/video conferences.
P2P is going really well, there are no problems with sharing desktops and applications until they try to share a powerpoint presentation OR invites a third participant. The behaviour is the same even if the two users are on different network sites with a
WAN between them. Perfect audio and video until sharing ppt or inviting third participant.
The environment is as follows
3 hardware front end servers, two edge servers, Office web apps farm with two servers. All web services are loadbalanced with BigIP. There is a cisco firewall between clients and servers. QoS is implemented on clients, edge and FE-servers. Latest CU on all
servers. approx 390 users now(pilot) should be approx 6500 when fully deployed. There is another pool with same setup, but we do not have users on that pool yet. Users do not have internet.All conversations going bad are classified as green in monitoring reports.
No extreme values in the reports. Clients are running no policies, all servers are default. Servers are flatlining. approx 20 video calls a day at this point e.g. there si more than enough capacity in the network and on the servers.
At this point I suspect either packet inspection on the cisco firewall OR some odd configuration needed on the Frontends.
I have asked the network guys if there is a packet inspection being done on the firewall, and if there is done anythong to optimize this.
I have read about the conferencing policy but do not understand what maximum limits should have anything to do with it.
I am not sure where to start here.

Hi,
The media traffic bandwidth usage can be challenging to calculate because of the number of different variables, such as codec usage, resolution, and activity levels. The bandwidth usage is a function of the codec used and the activity
of the stream, both of which vary between scenarios. The following table lists the audio codecs commonly used in Lync Server 2013 scenarios.
You can refer to the link below of “Network bandwidth requirements for media traffic in Lync Server 2013” to check if the network bandwidth match the requirements (especially for conference
situation):
http://technet.microsoft.com/en-us/library/jj688118.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Audio and video problem when streaming after flash player update

After i updated to the latest flash player (11.7) I have problems with video streaming. The video plays but after a while the audio stops and the video will keep playing but will also stop after a few seconds. Is the new flash player update at fault?

hello volden, your system details list two versions of the flash plugin (Shockwave Flash 11.7 r700 & Shockwave Flash 11.6 r602) as being installed in firefox, which can lead to problems.
please try to use the [http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html flash uninstaller provided by adobe] to remove both versions and afterwards only install the current plugin from https://www.adobe.com/go/getflash

I am trying to export a video from Premiere Pro. I have both audio and video checked and the sequence is active but only the audio exports. There is no video at all. Can anyone tell me how to get the video to export. It was working fine until today.

Premiere Pro CC has been working fine until today. I have completed my sequence and it is active. I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate. I am choosing entire sequence. The audio exports but the video and title does not. Can anyone tell me how to troubleshoot this so I can complete this project? Please!

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Synchronize audio and video over RTP

Hi all,
I am new in jmf. Please any one tell me, how to synchronize audio and video streams, when we capture thru audio and video capture devices and send it over network thru rtp protocol and receive at client side. How to syncnronize at client side? Please send me reply if any one have solution in jmf.
Thanks in advance.

Does anyone know about how this is done? I'm doing a videoconference thing with jmf, QoS is a required componenet! So if anyone knows about how this is done, plz share with discussion! All I know so far is that I can buffer the incoming streams to some extend then call syncStart() to start the video with the starting time of the video!

Audio and video skip after installing USB Sound Blaster Audigy 2

Hi community,?Since installing my USB Sound Blaster Audigy 2 NX, audio and video skip when being played with either windows media player, winamp, iTunes, neroshow, winDVD 7, creatives own media players etc. in fact anything I can try, won't work. Games are fine, in fact the sound is brilliant. I'd be really grateful for any feedback on this, not being able to listen to music is driving me crazy. Thanks.

Hello thebro90,I had the same problem.After tryed everything, uninstall, reinstall audio drivers, etc, I finally manage to solved it by updating the CPU drivers... I have a AMD Atlhon X2 4800+Never had the problem again.Best regards.
S?rgio

Audio and video out of sync when using quicktime conversion

hello,
i am editing a hdv project and want to export to quicktime. the client needs it in a specific size (700x394). they do not want the video in the file compressed, just the size of image. they are compressing the video through flash for the web. anyways, i used to just use quicktime conversion, custom size and use 700x394, but now when i do that the audio and video are sparadically out of sync in the product. the wierd thing is that the project plays fine in the timeline, but when i export the problem occours. i then, exported to a full res fcp movie and it is fine. then tired reexporting through qt pro to 700x394. when i did this their were no sync issues but the quality of the file was not so good, it look more pixely, certainly not as good as when i did it using quicktime conversion.
how can i export through fcp to get the 700x394 file? someone said 'use current settings' instead of using quicktime conversion? how do i do this? what do i need to do and what are my settings?
any help is appreciated. thanks a ton in advance.
cheers,
clay

What format are you converting the HDV to?
If it's animation, it is quite possible your computer can't pull the data rate. In this case it would be a processor / hard drive issue not an out of sync issue.
x

When I try to import video clips into Premier Pro 6 the audio and video aren't synced.

When I try to import video clips into Premier Pro 6 the audio and video aren't synced. I can moved both of them around without the other. This creates a lot more work. I have looked on forums etc but can't find the answer Can you please help.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
-and Source Patching http://forums.adobe.com/thread/1442800?tstart=0
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Does your video use a VARIABLE Frame Rate or a Constant Frame Rate?

When exporting to quicktime audio and video out of sync

i am trying to export a small four minute movie to quicktime. the movie plays back fine in the timeline but when i go to export to quicktime, some of the audio and video is out of sync and it semmingly looses a second every now and then. very wierd. the project plays back flawlessly in the timeline, but when i export to quicktime using quicktime conversion the above occours. any tips, suggestions would be greatly appreciated. thanks.
Mac Pro Mac OS X (10.4.9)

don't use quicktime conversion. use 'current settings',
x

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

Audio and Video tracks don't go up/down together EVEN when linked selection is checked!

I'm sure this is something really simple but I just can't figure it out. And it must be a button or a option that I've checked because it didn't use to do that a few days ago.
Basically, I have a clip on the timeline which has a video and an audio track. I want to move the video clip up to the next video track but I want the audio to move down to the next audio track too. Right now it's not doing that. Only the video file moves up to the next track and the audio clip remains in the same track. How do I fix that so that however many tracks I move the video up by the audio goes down by that same number of tracks?

Hi Shooternz,
shooternz wrote:
Not sure how other NLES manage it but I think it would be a pain if audio automatically followed video in this respect. eg Blocked layers b'cos something is already there.
FCP &, and earlier behaved that way. I prefer the way Premiere Pro does it. You often do not need to move the audio to a different track when you move video to another track. I want to control the placement of audio and video separately now.
Thanks,
Kevin

Audio and Video out of sync during editing. PLEASE HELP

I am using a MacBook Pro. Specs are:
- OS X version 10.9.2
- 2.5GHz Intel Core i5 Processor
- 4GB 1600MHz DDR3 RAM
When I import a video into AfterEffects CC, the audio and video are out of sync. The audio and video files are the right size, length etc. but are way out of sync. By the end of a 2 minute video, it can be out by up to 5-6 seconds. This applies to videos imported from any device. iPhone, USB and even videos I've recorded directly from my computer. Most files I try and import are MP4 files, but I've found the same issues with all other video files. I've even tried importing them separetely as an audio file and then as a video file. Nothing seems to work. I am also experienceing the same issue with Premiere CC.
Please help. I am needing these programs to work for assessment items.
- Andrew

Without knowing the specs of your videos it is hard to say. I'm also running a Mac and am having no such issues.
My first thought is that you have something from a 3rd party installed that is causing conflicts. If all else fails try transcoding your mp4 files to a frame based codec using the Adobe Media Encoder. Pick one of the Apple production codecs or Jpeg compressed QuickTime.
Are you running a ram preview? Did you render your Premiere timeline? Are you new to AE?

Audio and video not in sync when exporting to Quicktime file

I use a digital camera to shoot video, which is in .avi format. I then import the clips into IMovie HD (selecting all the clips and dragging all at the same time into IMovie). If I play the video from beginning to end in IMovie, the audio and video line up fine. But, when I 'share' to Quicktime file, the longer the video is, the more out-of-sync the audio and video become.
I didn't have this problem when I used a mini-DV cam and imported using a firewire cable (in real time).
Any ideas as to how to get the audio to sync up with the video once it's shared as a Quicktime file? I've tried .mp4 and .mov, and I have the same problem.

Anything here help?
iMovie: Improving audio and video synchronization
http://docs.info.apple.com/article.html?artnum=42974

How can I combine the audio and video files from youtube downloads when they don't automatically combine?

I'm using YouTube Video and Audio Downloader. Sometimes the audio and video files combine automatically, sometimes they don't - remaining as separate " DASH - .m4a and DASH - .mp4 ". It used to be that when this would happen I could open up a "ffmpeg" window which would allow me to "manually" convert them to a combined .mp4 file. It was a "drag and drop" type of interface. For some reason I can no longer access that ffmpeg combining function. I tried clicking on ffmpeg.exe. I tried re-downloading ffmpeg several times, both from the Downloader options tab and from the ffmpeg website.
Thanks for your help.

Sounds like a question for the developer of the video download add-ons that you have installed.

Audio and Video are not synced up ONLY when viewed in full screen....?

Audio and Video are not synced up only when I view my project in full screen. I can watch it in the project viewer the audio and video play as they should. I have a presentation tomorrow and I can't figure this out. What am I doing wrong?

Have you updated to version 9.0.2 - this Software Update was released a couple of days ago and fixes audio sync problems as well as improving stability in iMovie '11.
John

Loose my audio and video scenes when editing

Similar Messages

Maybe you are looking for