Loose plastic part (Photosmart C410b)

HP All-In-One Photosmart Premium C410b
Mac OS X 10.9.1
While clearing a paper jam at the back, I found a loose plastic part (see image).
Where does it belong?
Can I fix it myself?
If not, how can I get it fixed with expired warranty?

-True.
-I wouldn't really be confident enough taking the case off!
- (http://www.ukipodrepairs.co.uk/fixmyipod/parts/6GClassic) - which one would I choose? Although (http://www.ipodrepaircentre.com/index.shtml) has an option for 'dock connector' which pretty much suits it.
Thanks!

Similar Messages

Black plastic part under the screen is loose (MBA 11,6)

The black plastic part under the screen is a little loose. If you press with one finger you push it in and it will move a bit. Anybody else got this problem?

Hi, was it covered under your one year warranty, I opened my Macbook Air one day and heard a crack, when I looked in the back of the computer the hing had broken and something was hanging out of the back. When I tried to close it the screen turned green and then went off, so I took it to repair however was told it probably wasn't covered on the warrant. From googling the issue it appears that many other users have experienced the same thing. I'm assuming if enough users complain it will eventually become covered!

Nokia n8 upper plastic part broken..... help plea...

hi friendzz...
today morning by mistake i dropped my N8 nd due to this the plastic part around my n8 headphone jack is broken a bit and came out..
Now its looking bit wierd as that upper plastic part is broken.
can anyone please give me an advice what can i do..
is there a way to replace it free of cost as my mobile is still in warrenty period...
im bit worried about it..
please help....

we don't know the prices, the guy at the Care Point will see it ad tell you.
Greece Nokia X6 RM-559 v40.0.002

Where to buy new plastic parts for laptop

Hi everyone, I have my laptop (HP Pavilion DV7 7020ec) for more than two years and because of the everyday use it has significantly scratched plastic parts around the display, on the back page and several other scratches all around its body part. What is more, the parts which are connecting screen with the rest of the laptop are broken too and I am just waiting to tear the whole screen. Therefore I have decided to buy a completly new case for whole notebook - can you tell me where can I buy such thing? I am from Denmark. Thank you

The parts are usually available but you will not like the price very much. Plastic chassis parts are just way more expensive than you would think they would be. However, if you are dead set on this here is the Service Manual:
Manual
See the exploded diagram on page 22 and let us know which exact parts you need and if they are available in Europe we can help you find them.

Photosmart C410b loses connection to Solution Center

Dear Forum.
My Photosmart C410b loses connection to the Solution Center (“HP Photosmart Prem C410 series Disconnected!”). If remove and reinstall the HP software (latest version from the Web) it works for a while but the problem reoccurs. In the past, it has been working for longer periods. Browsed this forum for a solution but was not successful (many seem to have some form of ‘Solution Center Disconnect’ issue (!!))
I would very much appreciate advice from this forum to structurally solve this (very) nagging issue!
More details:
-       Product name: “HP Photosmart C410b”
-       Product number: “CQ521B”
-       Firmware version: “VAx2FN1121AR”
-       Windows 7 Ultimate, 64bit
-       PC connected wired to router
-       Printer connected wireless, signal quality 5 (1=low, 5=high)
-       Printer gets IP address from DHCP server (address reserved for the printer via its MAC address)
-       Printing from Windows works OK, Airprint works OK
-       Printer can be reached directly via its IP address in a browser
-       Using Microsoft Security Essentials and Windows Defender
-       Restarting PC and/or printer does not help
-       Power cycling printer does not help
-       Deactivating the “Windows Firewall” does not bring the connection back
-       Removing and reinstalling the HP software helps (for a while)
-       HP Print and Scan Doctor (HPPSDr version 4.1) detect this printer
-       HPPSDr completes ‘Fix Printing’ without problems
-       HPPSDr fails’Fix Scanning’ on the second test ‘Driver Check’ after passing the ‘Device Manager’ test. “Fails” in this case means it just hangs and the only way to close HPPSDr is to use the Task Manager to kill it.
-       I also have a G4050 scanner installed (USB) and this one passes HPPSDr ‘Fix Scanning’ without a problem
Thanks in advance,

Dear Teri,
Thanks for the suggestions. I followed your advice, please note my findings:
- I followed 'method 1' as suggested. However, I found multiple instances of the ...\temp\7zXXX\... folder containing the uninstall_L3.bat file, I randomly picked one, all these batch files seemed identical
- to run the batch file, one needs to set the default folder to point to the folder containing ccc_uininstaller.exe (which also contains uninstall_L3.bat. To that extend, I opened a CMD window and navigated to that folder and started uninstall_L3.bat from there
- uninstall_L3.bat ran without any error message, but also wanted to delete stuff related to my otherwise properly working G4050 scanjet. I accepted all. There were multiple requests for the G4050.
- I thereafter ran the freshly download installer for Windows 7 64 bit. This installar also ran without any error messages.
- The results is a connecetd C410b (but it would do this anyhow after each reinstall, the proof of the pudding is after some time: will it remain connected?)
-However...
The Solution Center now offers only the options to transfer images and to send a fax, there is no option for scanning. Also for the G4050, if I select this device in the Solution Center, there is no option at all. See screenshot:
I deliberately did not do or try anything else at this point in time, prefer to wait for your advice.
(I would guess that at a minimum I also need to run the installer for the Scanjet G4050)
W.
Update: after a restart of the PC, things got worse: the C410b vanished from the solution center. As stated no additional attempts done to recover.
W.

Self-adhesive plastic part on bottom of MSI H55M-E33?

Hi,
I just got an MSI H55M-E33 from my retailer. The problem is that I have the feeling that the board is not new (someone may had already installed it).
I found a small piece of black self-adhesive plastic on the bottom on the board which I had never seen before on any MoBo I have installed before. The black plastic part is about 1x3cm large and sticks on the bottom of the MoBo next to the IDE-port.
Is this a regular part of the MoBo or is this something that doesn't belong there? Has anyone recognized something like that on a brand new H55M-E33?
Thanks in advance,
Robert

That doesn't sound right. Here is a reference image of the bottom of the board as it should look fresh from the box:
http://www.nowpug.com/?document_srl=548597&mid=photo

Replacing all macbook casing from chipping/scratche (all the plastic parts)

Hi,
I've had my macbook for about a year and it's had the usual level of surface scratching on the white plastic. I'm still under warrenty, and recently my laptop has been chipping due to the fairly well known design fault at the palm area (above the status light and remote sensor).
However, can someone tell me if it will be fixed for free, and which parts will they replace? I was thinking of getting all the plastic parts replaced, if not, then the broken part (for free) and the front of the laptop (where the apple logo is). I'd be willing to pay the surplus. Will they accept this?
Anyone got similar experiences dealing with macbook chipping/etc repairs? thanks.

I can not believe Apple hasn't addressed this... first off the palm rest area where it chips is razor sharp - then it chips..
I have had 4 prior mac laptops and WTH? Let's change something that has worked fine for 5 years and still charge 1,400 bucks. IMHO it is unacceptable and I would never recommend a macbook to anyone. And to upsell to a pro is BS. Wait till the nest design. Maybe Apple employees don't use macbooks?
And to have to BUY a hard case for a design flaw??????????????

Plastic part on bottom of iPod loose?

So surrounding the bit at the bottom of the iPod where you charge it is a line of white plastic - the BOTTOM line of that is loose (http://i39.tinypic.com/1z5lmyq.jpg) so that I can push down on it with my finger nail and it clicks, then bends down
Is it safe to try and put a bit of super glue in there? I tried to put a bit on a sliver of paper then slide it in, but it dried too fast and I couldn't fit it in. I know it's not that much of a big deal but it would be great if I could try and fix it now-
Thanks for any help!

-True.
-I wouldn't really be confident enough taking the case off!
- (http://www.ukipodrepairs.co.uk/fixmyipod/parts/6GClassic) - which one would I choose? Although (http://www.ipodrepaircentre.com/index.shtml) has an option for 'dock connector' which pretty much suits it.
Thanks!

Need to find a little plastic part for G60-530US

I need to replace the little plastic connecter (white piece of plastic) that holds the ribbon to the HP G60-530US Keyboard. It broke when attempting to replace the keyboard. Please help me find a part number and where to buy it.

It has no part number and there is no standard market to buy it. It is technically part of the motherboard. You are going to have to find a junk unit and harvest the part from the motherboard or maybe find a parts house that will find one for you.

Creative HS-1200 - Broken Plastic Part - Can I get this replaced?

Hi,
I bought a Creative HS-1200 a few months ago, and the plastic housing that connects the headband to the metal frame for the earpieces has broken.
Just to be more specific, I mean the rectangular box that the metal framing slides through to allow you to adjust the size of the headphone. There are three screws in each one (the third is inside -- I can see it since mine broke), and it looks like the the small holes they screw in to just broke off such that the pieces can no longer stay together, i.e. I can't just screw it back together.
Would it be possible to get replacement parts somehow? I could screw it back together myself. Or if not, I can also send it in for warranty repair -- would this be covered?
As a temporary solution, I wrapped a piece of tape around the rectangular housing, and it'd holding together okay. Everything still works, I just don't want it to fall apart.
Thanks!
Andy

send it to shop for warranty replace..
came back with message
"warranty dosnt cover physical damage"
i guess the headset is mentally ok then -.-
im kind a pissed off..
i use 100€ to buy a headset and i can use it for 3months it gets broken cos they use to cheap plastic and warranty dosnt cover it -.-
guess this was my last computer accessory i buy from creative..

Possibility of fixing scratches on the plastic part of Magic Mouse

I have a magic mouse I bought used and the top plastic was severly scratched by the previous owner's girlfriend's ring. Is there a possibility of removing the scratches? I know for a fact that the plastic is identical to that the first intel iMac was made of, and I have seen someone removing scratch from one of those, but with the touch surface in this mouse will it harm to do so? You can see the scratches and fell it while using the mouse, it isn't like those scratches you see on the apple display mouse it's even worse.
I think i could replace the mouse but is it cover under the 3 year warranty the computer it came with (iMac mid 2011, purchased in Feb. 2012 and expiring at Feb. 2015)?

As far as I know, the Apple care warranty is transferable within the limitations of the country where the original machine was purchased. I believe it can be done on line and does not need the original receipt.
But this repair will not qualify because the fault is due to usage (or mis-usage) and not due to manufacturing failure.

Notebook docking station -what the plastic part used for?

I got a docking station for an Elitebook, and it had a plastic piece that I cant figure out? Where does it go?
Any ideas appreciated

I think that it could be a good guess like you suggested.
I can't say where the piece was located since someone else opened it, sadly.. sigh..

New email send freeze. have to refresh screen to send, and usually loose some part of email response. 1.17 on mac.

I reply to an email and when I go to send, nothing happens. I have to refresh to make it work. I have learned to copy the text before I refresh, or I will loose some of it. Don't have this problem with other browsers.

Update your firefox
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
*''Once you get the pop-up, just select "'Start in Safe Mode"''
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I just got my ipod 4g screen fixed a few weeks ago and when I got it back my screen was loose and part of my keyboard did not work. Then I fell and it cracked majorly, doi send it back?

How can I fix this?

Did Apple do the work? Apple does not repair you iPod they exchange it for one they already refurbished.

Need a replacement plastic key part for my laptop keyboard. Where do I get it?

Where can I get the inner white plastic part to fix a key on my Pavilion DV7 keyboard?

You can find those parts easily on this website:
http://www.machinaelectronics.com/store/keylab/
They have guides to help you install the keys and they will also help you find the right type of mechanism for your keyboard. Good luck!

Loose plastic part (Photosmart C410b)

Similar Messages

Maybe you are looking for