Loose random picture in Aperture 3.3.2 etc
I use 10.7.4. After updating to Aperture 3.3.2 the following problems occured:
-there are items in my aperture bin but invisible when opening the bin
-over 700 (out of 4000) pictures (raw [neff], jpg, tif [niksoftware] ) are only shown with a thumb the original is not available
-conecting to my ipad (which should sync w/ aperture folders) will try to conect w/ iphoto
I tried to "repair" but not succefull at all. Restoring from back up saved 99% BUT still 1 picture is lost
and the 5 (invisible) items in the bin. I fear when I empty the aperture bin I will loose pictures again and start
restoring again.
Does anyone have the same problem or even better a solution?
THX
We will need more information to be able to understand what the problem is:
What is the Aperture version you upgraded from - an Aperture 3.2.x version or an Aperture 3.3 version?
If you upgraded from Aperture 3.2.x or earlier, you may need to rebuild your Aperture library, not only repair it. Also repair the permissions.
there are items in my aperture bin but invisible when opening the bin
What do you mean by "bin"? The Aperture Trash bin?
-over 700 (out of 4000) pictures (raw [neff], jpg, tif [niksoftware] ) are only shown with a thumb the original is not available
Is this still the case after the "repair" you did? And where are your original (master) image files located, do you reference the originals outside the library or is your library managed? And where is the library - on the system drive or an external drive? If your images are referenced and you know heir location, you can use "File > Recoonect originals" to connect the versions to the missing originals. But if your library is managed, this will not be so easy. Post back, if rebuilding the library reconnects the images and helps with the trash problem.
conecting to my ipad (which should sync w/ aperture folders) will try to conect w/ iphoto
Do you sync with iTunes? Then you need to select Aperture in the "Photos" tab of your iPad in the iTunes library inspector pane.
Regards
Léonie
Similar Messages
-
Since I believe you can't create a Photo Album (Book) in Apperature, what is the best way to transfer my pictures from my Apperature Library to iPhoto (in order to create my book) without loosing any picture quality ?
Since I believe you can't create a Photo Album (Book) in Apperature, what is the best way to transfer my pictures from my Apperature Library to iPhoto (in order to create my book) without loosing any picture quality ?
Why do you think that? You can create printed Books in Aperture with similar themes as in iPhoto, and with more options to create custom themes on your own.
See this page - http://www.apple.com/aperture/what-is.html - scroll down to see the example books.
But if you prefer the iPhoto themes and layout, you can open your Aperture library in iPhoto, if you have both the current version of iPhoto and Aperture. Simply use the command "File > Open Library in iPhoto" and you can create your book in iPhoto.
And switch back to Aperture by using the command "File > Open Library in Aperture".
See: Aperture 3.3: Using a unified photo library with iPhoto and Aperture
Regards
Léonie -
Import causes me to loose 400 pictures .. Please help
Hy,
I have been an Aperture user since 1.0 but now im puzzled.
I imported my A2 library into A3 trial but i have 400 pictures less than i started with ...
Situation :
23000 pictures on referenced raid5 array
No missing pictures, all online in aperture 2.
Succesfull import, no crashes
I have multiple backups so i loose no pictures but could someone help me to explain what happened, if this persists i will not buy A3.
I will make bug report today as well.
Thanx and please excuse my bad english.
Message was edited by: Royemans due to bad spellingNobody ???
-
My friend's iPod touch 5th gen is locked somehow for 41 years and she does not have a backup. Is there a way to unlock the iPod without restoring it or loosing the pictures and videos from the camera roll, the applications can be redownloaded and she had no music. Is there any known bug about ipods locking on their own because no one seemed to have tried to bypass the 4 digit code and it is locked for 26 million minutes.So thank you if anyone has any information or help for us.
Your friend may have placed the ipod next to an object that repeatedly pressed the screen. Under certain circumstances this can lead to what appears to the iTouch to be failed attempts to access the system. After repeated failed attempts, the Touch increases the waiting time required for the password and may ultimately lock in the way you describe.
It's been a while since this was posted, but this might be informative to someone else who finds themself in a similar predicament. -
Although all photos in my libraries are rotated to the correct orientation, random pictures still show up in the wrong position when viewed on Apple TV.
Any suggestions?silvergc
Thanks for your comments
Several of our iPhone users in the UK reported the problem this morning, and as the Apple fan in the office I've got the job of resolving the issue
The original Excel was an old .xls file, but I have saved it as a .xlsx and the problem still appears
I haven't spoken with our developer yet, but I assume he has created the Excel file using some programming tools rather that directly using Excel
In the meantime I have created a simply spreadsheet with 8 cells contain values
In the first 4 cells, I have formatted them using Currency, and have used the currencies USD, DEM, GBP and CHF
In the remaining cells I have formatted them using the Accounting option, using the same currencies
When I review the spreadsheet on the iPhone (or iPad), the first 4 remain the same yet the last four all show the £ symbol
I have now changed the Region Format of the iPhone to United States, and when viewing on the iPhone the bottom 4 values are now all showing the $ sign!
If I had created the spreadsheet I would have put the Currency code in a seperate cell and purely used a numeric format for the number, and there would be no issue. That might be the only solution
Yes, the Director has the full MS Excel app on his Windows 8 device, but I can't expect all of our clients to go and do the same, in business many of them will have the iPhone
We may have to change the way we produce the report because of Apple's failings here, and it's not the first time that we have had to change something because Apple devices can't display them properly
In business, submitting a potential job contract only for the recipient to get the wrong idea of the costs is a major concern -
I have the photographer plan With Photoshop and Lightroom. Now suddenly The creative cloud app says that Lightroom isn´t installed. It is and how do i fix this. I don´t want to loose any pictures. Tried logging in and out. Also restarted my Imac with no luck.
This has nothing to do with your pictures. As long as LR works, nothing happens. The CC app merely has lost an entry in the installer database. Would a reinstall fix it? Sure. Is it necessary? Not really (until the next version or update). So unless you have too much time to spend or something isn't working, I'm sure you can find more interesting things to do with your tiem. Otherwise use the cleaner tool and get to it:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium -
I lost all my pictures in Aperture and I used Time Machine to restore the lost pictures.
After losing all my pictures on Aperture and not being able to restore the the pictures using Time Machine as instructed by Apple Care. I searched the web on how to restore the pictures using Time Machine and did not find a good solution. So with trial and error this is the solution that worked and it is easy. Using Time Machine restore the entire Pictures directory. Then restore the Aperture in Application. Then go to the Pictures directory and click on the White Box label Aperture. Do not open the Aperture Application it self Clicking on the White Box label Aperture will do the trick. It worked for me and I hope it works for you. Initially I lost 9500 pictures and I was sick till it was fixed. Everything went back to exactly the way is was before, including thumnails.
Thanks for posting. I have my library on an external drive and it spins processing before it crashes. I have tried everything. I think it believes some images are corrupted but who knows.
Do you keep your photos on your internal or external hard drive? Did you just open aperture and choose new library or did you delete your old one? I am not sure what to do, I have a big aperture library on a hard drive and time machine back up somewhere. I have a mirrored hard drive so I may only have 2 copies of the same screwed up library, don't know if they back up on time machine also?
Time machine has always confused me to be honest and fortunately I have never had to use it. So you can just replace your pictures? I think I have a bunch of photos in iphoto library on my internal hard drive, I hope I don't end up with duplicates and triplicates. Although I would settle for just about anything right now. I have 15k pictures that I see briefly before it crashes. -
When i turn my iPad on, it keeps showing me how to use it, some random pictures, how to use mail etc. Anyway how to disable this?
Sounds like you got a store demo. Look in your settings and see if you see "Demo Mode/Demonstration Mode" or something similar.
-
How do I easly send my pictures from Aperture to CVS for actual printing? I always have trouble finding my photos in the Aperture library when I need to load them into the CVS web interface. I can't even tell which photos they are without seeing them.
Also, what's the best way to do it from my Iphone. Doesn't seem to be a good app for that.Export the adjusted version from Aperture to the Desktop. Download the exported version to CVS.
You shouldn;t be looking in the Aperture library (if by looking you mean using the Finder on the library). Use Apertures tools to do this. Besides the only thing you could get out of the library would be the original file that you imported into Aperture not the version with your adjustments. -
ITunes does not find all pictures in aperture
Hi,
I am trying to sync my first generation iPad with some pictures in aperture via itunes.
All of my folders and projects appear in itunes and are selectable. But itunes shows some folders with 0 pictures, which is not true.
I already made all maintenance procedures on the aperture mediathek, deleted the ipod photo cache folder several times, made several restarts and it does not change.
Some folders are OK, all pictures are synchronizable and some foldres simply show 0.
All my pictures are saved in the aperture mediathek.
Does anybody have an idea, what else could be successful?
Thanks, BobI had the problem...firgured my issue out. When I looked at the differences it appears as though itunes wants to know what type of file you have. In other words you need to have the extension. I looked at my photos and the photos itunes saw all had the .jpg or .tif. I exported the files I wanted on the phone, since renaming them didn't change the file name, looked in the finder to make sure that the .jpg was on the file and reimported and boom sync'd perf.
good luck
shaun
Message was edited by: Shaun Kennedy1 -
my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again. -
Image problems when importing modified Iphoto pictures to aperture 3
I seem to have a bit of strange problem with modified pictures after they are imported in A3.
I am using Iphoto 8.1.1 and have just bought Aperture 3. I decided to import all my iphoto pictures using the import iphoto library function.
I noticed that all images that had (in iphoto) been edited using the retouch function to reduce blemishes have problems in Aperture. The problem appears to be where the brush was used is now pixilated in that area and it just looks like a cluster of "noise". This only seems to happen when I used the import iphoto library. I tried to replicate the issue importing some of the same pictures individually and there was no issue. Than I made a new library tried to import iphoto library and same issue ones again. Exporting the picture out of aperture keeps this error. It's quite a worry as I have several hundred of these pictures and I am not sure what to do. Any suggestions?
Please have a look at the links below for an example of before and after import.
http://files.me.com/dan_801/rlebic (the original file)
http://files.me.com/dan_801/s0zn6d (after importing into A3)ok quick update - I opened up the aperture library in finder and located the image. The master appears to be the correct image but in Aperture itself it's showing a different image. The picture in Aperture appears to be pointing to the preview directory within the library structure. I tried re building the review and thumb and same issue again. When I export from aperture it also seems to export the preview version as oppose to the master. How do i fix this issue
-
How can I import pictures from aperture into iPhoto
Since moving to mountain lion OSX, I can't find a way for importing pictures from aperture into iphoto. There used to ba a tab under archive in iPhoto where you could view the aperture library and select pictures to import them into iPhoto. This tab has diappeared. Could anyone tell me how it's done now?
I noticed indeed that you can change the library under "archive" in iPhoto but when I choose aperture library I can't find the same structure of albums as in aperture.
Sorry I don't understand this. What is "archive"? -
I downloaded Aperture and transferred all pix from Iphoto. Everything was on Aperture. Suddenly I have lost all the pictures. I have a handbook, etc., but to no avail. Help!
When this happens to a new user the two most likely causes are:
Aperture opend a different library that is empty. To check this go to File->Switch to Library. You'll get a window that looks somehting like this:
Of course the names for the libraries will be different. What does yours show? Is there more then one library listed. If you select Other/New you get this:
The first library in the list is the currenttly opened Library. What does you window say?
2. The other possibilty is that you have a filter set on the library keeping you from actually seeing the images in it. Go to the Library tabb of the Inspector and select the Photos icon. Make sure the search box looks like this:
If neither of these two actions clear up your problem post back.
regards -
How to free space in icloud with out loosing my pictures?
I need to know step by step how to free space in icloud from y devices Iphone, ipad and itouch with out loosing my pictures. I do not know how to save all my pictures from my iphone to my PC
Thank youDon't use icloud to archive/save photos, these must be saved to a computer.
Read this... import photos to your computer...
http://support.apple.com/kb/HT4083
As for make more free space on icloud...
Delete old emails you no longer want,
Go through your calendars, contacts, etc. and delete those you no longer want,
Delete backups: Settings>iCloud>Storage & Backup>Manage Storage, tap the device name and on the resulting screen, scroll down and tap on Delete Backup.
Maybe you are looking for
-
How do I find the size of a folder (not file) in Bridge CS6
-
Transfering Texts From iPhone 3 to iPhone 4?
I'm getting an iPhone 4 this week, and I want to know if I can transfer all my text messages (most importantly), contacts, etc., over to the new phone from my iPhone 3. Could someone explain how to do this (if it's possible). Thanks!
-
How can I view my backed up docs on ICloud?
I need to know which docs have been backed up? Bd
-
Display settings and 2nd monitor not working
Hi everyone, I have a tx2510 and Samsung 24 inch monitor. I have been using the Samsung as my monitor for months now with no issues. I went away with my laptop for a week and came back yesterday, hooked the analog monitor cable in, used it last night
-
When my dynamic form is saved, the added pages (subsections) disapear.
I have created a form and saved it as a dynamic file. There is a button to copy a subsection and allow the user to continually add section s and fill them out. When the user saves the form, the additional pages are not visable the next time the pdf i