Loose rca connection with monster cable

Just bought a universal dock to hook up to my home stereo receiver. And a Monster iCable for iPod Stereo. The RCA plugs are loose as a goose! They don't fit snugly into the receiver input connections. Weird. I thought this was plug & play.

RCA cables have this happen sometimes. Either return the cable to where you bought it and ask for a different one. Or you can pinch the ring to make it fit a little tighter. You can see where the splits are that allow it to expand when plugged in. These get loose. Just use your fingers and pinch it back so there is not as much gap in the ring.
Mort

Similar Messages

Apple tv keeps loosing the connection with the mac

Purchased a new desktop mac, time machine and an apple tv. everything is working splendid however the the apple tv seems to keep loosing the connection with the computer. As I sit here i see its no longer listed on the i tunes as a device, I seem to have to reset to the factory defaults again and re install it. I hope I am wrong and I am missing a step and its there and maybe I just don't know how to access it, So here I am posting this to all, Help.... I will be the first to admit I really am a little lost with this apple tv
thanks you everyone

I have the same problem as you do. i have had my apple tv for about 2 years now. I connect my apple tv to my iMac, via wifi by airport extreme. i used to before connect via ethernet cable to my airport extreme, i still had the same problem as you do. that itunes losses the apple tv. yet, from apple tv i can still access the internet. i have gone through all my settings on my airport, they are all correct. the connection only seems to last a few days then, it just losses connection. i have asked this question before, but now one was able to help. Apple is not interested because apple tv is just a pet project to them. you do not have to rest the apple tv every time, you just need to go to the options menu and select the connected computers and tell it to delete connection to your computer. once it has done that, make a new connection to your computer on itunes put in the new passcode and set up which films etc you want to be sync. We should not have to do this every few days. Apple needs to sort this out or at least lets us know how to stop this.

My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported"

My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported", I can't charge or sync at all. I tried plug and unplug many time, still can't detect/charge my iPhone5, but sometime will 'lucky' that can connect to my iTunes and charge battery…
This message will auto pop up also when I don't have plug anything in my iPhone 5, It is very annoying…
The lighting cable is original and now i'm using OS 7.0.4 / iTunes is 11.1.3
What I can do to fix this problem? Thank you.

I would try using another cable you can likely borrow one to test from somebody
if it's the same then likely the connector in your iphone have been damaged

My i phone 4 keeps loosing its connection with my Toyota Camry bluetooth-- anyone have any ideas why?

My i phone 4 keeps loosing its connection with my Toyota Camry bluethoth does anyone know what I can do about that?

Ignore the ridiculous post by W1$C. He posts that regardless of the person's question.
Things you can do to solve your problem:
1. General>Settings>Reset Network settings
2. If this is only happening at home, power down your router for a minute, then power it back up.
3. Other basic troubleshooting steps outlined in the user guide are to restart, reset, and restore--first from backup, then if needed as a new device.
Hope this helps.
GDG

TS1369 My ipod ejects itself, immediately after connecting with usb cable, before synchronizing could start. What's wrong?

My ipod ejects itself, immediately after connecting with usb cable, before synchronizing could start. What’s wrong?

Have you tried plugging the iPod in with a different USB sync cable to verify the issue is not with the cable? It might not also hurt to connect it to another USB port as well.
Otherwise, try manually placing the iPod into Disk Mode and then connecting it to your PC.
Putting iPod into Disk Mode
B-rock

Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

Solution may be found if you search in the "More Like This" section over in the right column.

HT202068 AppleTV seems to be loosing its connection with my iPad

AppleTV loosing Airplay connection with my iPad & iPhone?

That will indicate a network issue
If on wifi try connecting ATV via Ethernet
Go to istumbler, netstumbler or similar to get a network report. Look for signal strength, noise, nearby networks

Samsung Monitor acting strange when connected with digital cable.

I have a Powermac G5 dual 2.7 GHz desktop. I am connecting a Samsung 2233BW monitor. When I connect the monitor from its digital connection using the digital cable I have a problem bringing the monitor back from sleep mode. I get horizontal jagged lines. When I turn the monitor off and back on it works fine again. When I connect the monitor from its analog connection and analog cable using a converter the monitor does not have this problem. Its not the monitor because I had Samsung replace the first one and I still have the problem. Someone told me it was a firmware problem, but Apple support says since no updates show up when I run software updates that everything should be ok. Is there something I can do or do I just have to live with the analog connection?

Have you opened the Mac up lately to see if the graphics card is clear of dust and not overheating?
Does this happen when you first boot up your Mac and then put the monitor to sleep?
Is the monitor set up to default to the digital input?
Most importantly, is it safe to presume that you have tried a new cable?
Message was edited by: DaddyPaycheck

My Macbook is getting freeze when i connect with USB cable

After I updated to OSX 10.7.4 Lion (Default 64bit).I try to use the touch panel device that I using before. But it keeping occur system freeze when I connect the usb cable.
Sometime I can operate it normal but the percentage is very low.
What 's the problem on?

Could be a bad cable or the device isn't compatible with Lion and it is causing problems.

Direct connecting with parallel cable

I'm trying to get arch linux to do a direct connect via parallel cable to a laptop with windows 98 so I can transfer some files (and I do have the right kind of cable). Can anyone tell me what programs/man pages I'm supposed to be looking at for this kind of thing?
I know some of you are gonna say right off the bat to get a crossover ethernet cable and connect that way, but the laptop doesn't have an ethernet port and I don't want to get a pcmcia card for this.
To make matters worse, the cd drive on the laptop won't work any more, so using cdrs is out too.
Thanks in advance for any advice.

Hi dlanor78 and tgc.
There's a nice PLIP mini-how-to available:
LINUX PLIP MINI-HOWTO
http://www.linux.se/doc/HOWTO/mini/PLIP.htm
You can connect Linux to Linux, DOS, but not Windows 95 (other variants are not mentioned anywhere).
There's some additional information about PLIP in the following article:
Making a Simple Linux Network Including Windows 9x
http://linuxgazette.net/issue57/sipos.html
The author gets around the Windows 9x limitation by installing Bochs and running Linux emulation on the Windows machine.
I first read about PLIP in Multitool Linux (Chapter 4. "Soup Cans and String Last-Ditch Communications Methods").
You'll need a Laplink cable for this to work, by the way.
Regards,
Win

Why won't my old iMac G4 recognize my Airport Express when connected with ethernet cable?

After I installed an Airport Extreme as a base station for my network, the G4 couldn't recognize either the Airport Express or the Airport Extreme unless it was connected by ethernet cable to the Airport Extreme - then both devices show up in the G4 utility. I have reset the Airport Express to factory settings many times and the Utility in my iMac 3.2 Ghz Intel Core 13 indicates that the Airport Express is working. Any ideas?

I suspect its to do with the WPA setup support changes. My very old G3 seemed to have the same issue of not able to connect to Extreme or Express. Used to connect before years back to Apple routers but refused to in recent time for reasons not explainable so I just connect it now via cable.

Why is that when I close off iTunes I loose iCloud connection with my library

Why when I close off I tunes I loose connection with my library

Settings>Store>Apple ID. Tap his ID and sign out. Sign in with your ID. If you are in iOS 6 it is Settings>iTunes & App Stores>Apple ID.

Nokia Lumia 630 phone connection with USB cable an...

Kindly be advised that I have been able to easily connect my Nokia E6 in the past to my Lenovo Thinkpad T530 running Windows 7 (64 bit) via Nokia Suite and Windows Explorer by both Bluetooth and the USB cable and was able to see the D and E drives (e.g. mass storage and phone memory) of such Nokia phones.
Since I connected my new Nokia Lumia 630 to the same notebook computer, the bluetooth phone appear under Bluetooth devices and music and sound can be relayed between the computer and the phone, however, no files structures are being displayed under such phone connection in Windows Explorer during a Bluetooth connection. During a USB Cable connection at least the documents and photos folders appear in Windows Explorer but nothing else on the D or E drives are displayed.
Even the Zune (the Nokia PC Suite replacement) does not want to even connect with the phone device from the notebook!
Kindly advise why I am unable to access the Nokia Lumia 630's full mass store and phone memory via BlueTooth or USB Cable from my Lenovo Thinkpad T530 running Windows 7 (64 bit) ?

Jonkie wrote:
Zune […] does not want to even connect with the phone device […]
Zune was targeted towards Windows Phone 7. It got replaced by the Windows Phone app for desktop – which does not give any more feature than you have already.
Jonkie wrote:
no files structures are being displayed under such phone connection in Windows Explorer during a Bluetooth connection.
Windows Phone 8.1 does not support the Bluetooth profile OBEX File Transfer (FTP) as Symbian did, yet. Because this is a feature request, there you go …
Jonkie wrote:
D or E drives are [not] displayed.
What files are missing, what do you expect exactly? Then, I look-up the corresponding feature request.

Device button no longer appears in iTunes after connecting with USB cable

Since updating software to OUS 7.0.4 my device buttton no longer appears in the iTunes window after connecting with USB cable

Problem solved. I needed to reinstall my Apple Mobile Driver. I found the solution on this web site.
iOS: Device not recognized in iTunes for Windows http://support.apple.com/kb/YS1538
After I reinstalled the driver, my iPohne immediately synchronized with my computer.

Loose wireless connection with security turned on

I am able to get a wireless connection when the wireless network has no security enabled. But when the security is turned on - using WEP or WPA (TKIP) - I can no longer get a connection. The error message says that the password is not correct (however it is).
Of note: I have another G4 (aluminum 1.33 GHz) running the same version of OS X that does not have a problem connecting with the security turned on.
I have the same problem at home or with other wireless networks that require passwords.
At home I have a linksys wireless router.
Thanks!
1 GHz PowerPC G4 Mac OS X (10.4.8)

i have a very similar situation to yours... my airport cannont get an IP address from any wireless network with security enabled. if it is completely open, it will lock in and get an IP address and everything is fine, but with ANY kind of security enabled, it wont get an IP and gives me the standard "169...." addresses. If i turn off security on a given base station, the machine will suddenly get an IP address, so I know this is a problem with the machine and not the router as other wifi devices connect to the router fine.
I've tried using standard WEP, WPA, and also MAC-address security and i get the same problem across all of them. Ive tried this with about 5 different routers, 3 linksys, 1 netgear and one dLink.

Loose rca connection with monster cable

Similar Messages

Maybe you are looking for