Looses wireless connection all the time.

Hi
I have a problem with my macbook pro, it looses its internet connection all the time. I don't know why since it's quite close to it's modem and other laptops that's more far away works fine. Any idea?
Best regards Frankensten

Does the router have the latest firmware? What happens when you are at a hotspot or a Starbucks?

Similar Messages

  • Thunderbolt looses internet connection all the time when its in a 3G area

    Is Verizon aware that this is still going on?????????????????????

    Same issue for me as well --- it also happens w/ hotspot conectivity.  It was so frusturating that I filmed it.  See video below:
    http://www.youtube.com/watch?v=_GAN0KppXkg 

  • Should Time Machine drive be connected all the time?

    I have just bought a Western Digital hard drive, connected it to our imac via Firewire 800, and started the initial Time Machine backup. As the iMac only has one firewire port that I also use for connecting other devices such as my DV cancorder or my Edirol audio interface, I am wondering what happens with Time Machine when it's hard drive is not connected, which will be when ever I am using the firewire port for other things? Time machine is defaulted to back up every hour which it won't be able to do if it is not connected.
    Will Time Machine just pick up and do a back up when it is reconnected?
    Or, would it be better to use one of the USB ports, even though this is slower, and leave the hard drive connected all the time.

    12frets56 wrote:
    Or, would it be better to use one of the USB ports, even though this is slower, and leave the hard drive connected all the time.
    This might be better, especially after your initial full backup, just so you don't have to be fooling with the plugs all the time, and perhaps forgetting to re-connect. If your incremental backups aren't large, the speed difference probably won't be significant.

  • Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

    Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

    Hello. I can say that you have a quite strange „huge question”… It’s non-sense to stay connected with your car which is hundreds miles away. Unless…
    I have a theory. You don’t want to controll your car, you want to controll somebody who is driving the car. Volvo XC 60 is a nice family car, usually used by married men between age of 35-45, probably with small children, so it’s very unlikely that you want to controll your teanage kid, mainly because probably even if you would give him/her to drive the car in the neighborhoud, I don’t think that he/she would be „several hundred miles away”…  If your child is not young teneage anymore, and he/she has his/her own life, but you want to control him/her, that is sick… So I am convinced that you want to controll your husband who probably travelling often! Am I wright?
    Isnt’t nice at all! Would you like if you would be monitorized in such way? I bet you don’t!
    Anyway, iPhone is smart, you can use for many things, but come on, you really were thinking that there is such kind of application???
    What could you do it's to put in the car a GPS survelling system, however I don't think that you could do it without your husband knowledge, otherwise he won't be able to start the engine...

  • Keeping external docking stations connected all the time?

    I would like to connect a couple hard drive docking stations to a new iMac so I can easily swap out different bare hard drives. Are there any issues or reasons to not keep two docking stations connected via FW or TB connected all the time?
    Thanks.

    Should be no problem, just remember to Eject the Disks in the Finder before removing from the Dock.

  • Just purchased an 11" Mac Book Air, and I'm using it as a desktop. Is it ok to lea the power adapter connected all the time?

    I'm using my macbook air as a desktop unit, with an auxiliary flat panel display, as well as an external storage drive and a CD/dvd drive. Is it safe to leave the power adapter connected to the computer all the time? Will the battery life get affected or shortened by being fully charged all the time?

    Apple recommends that for best battery life, you allow the battery to discharge occasionally.
    Here's a good link:
    http://www.apple.com/batteries/notebooks.html

  • GPRS or Wifi stay connected all the time

    I am in a big dilemma. A few days back the GPRS or Wi-Fi connection always connects on its own and stays connected for hours! It used to connect only when required (exchange or Push mail set to synchronize every 30 minutes). It used to connect, check mails and disconnects automatically. But now, it stays on all the time. I checked all my mail connections and they are all set to check mails every 30 minutes. I made sure there are no apps running in the background also.
    I called Nokia care and their suggestion is to format the phone and try. But I have so many pics, videos and data that I do not want to format.
    A better solution (than hard reset/format) is always welcome.
    Thanks.

    Hi Pravin. Although it does not transfer any data, my concern was the connection always being active and battery life getting shortened. Anyways, the connection always being on according to me is a bug.
    After I did the factory reset, I came to a conclusion that it was one of the emails that I had configured (5 email accounts + 1 exchange account) and one of the email accounts was hanging this.
    It is much better now after a factory reset.

  • Why my ipod sync whole music library when connected all the time ?

    My itunes(latest)  everytime i connect my ipod (5th gen ) syncs all the songs from begining even though there is no new songs added ? Can someone please help me out this . This has been happening all the time and i have to wait all my thousand plus songs to get synced all the time !

    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    or maybe this:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Wireless drops all the time!!

    Please help!! I have a new MBP and I have to switc wireless networks every 3 or 4 minutes to stay connected. Using Lion...

    Try the basics first:
       Change your router channel number.  Most times this works & is all you have to do.
    Disconnect & reconnect your modem.  unplug it for about 10 seconds.  Plug it back in.  Do the same for Apple’s routers.  Wait for everything to reboot.
    System Preferences>Network
    Click the Assist Me button.
    In the next window that pops up, click the Diagnostic button & do the necessary.
    Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer.   See these basic networking KB Articles:  http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
    http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
    Manually provided DNS server addresses are higher priority than DHCP's
    http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    ============================
    What to do when you can't connect to the Internet
    Also, run the Airport Utility app which is located inside the Utilities folder.
    =====================
    If using a  Linksys router, contact LinkSys Customer Support and/or post in their forums.
    If using Apple's Airport, please re-post over in one of the AirPort Forums.

  • Help. DSL drops connection all the time, is it the modem? (westell 327W)

    Pardon me because I'm not so tech aware, and so don't know what to do to try to find a solution.  We lose our internet connection a lot.  It seems to happen in spurts:  last night we couldn't connect at all, today it was bad in the morning but now I've been on for about a half an hour and all seems good.  I can't figure out any pattern.  Last weekend we were fine all weekend, during the week it was bad every single day. 
    I connect through a desktop and the westell modem;  upstairs we connect with a laptop and wireless.  The connection problems happen in both places, although it's our housemates who connect upstairs through the wireless and so I'm not entirely sure if they have problems when we're having problems or not (this has been going on for so many months, we've all kind of adapted to it.  but it's more and more frustrating).  Our wireless is encrypted.
    When we can't connect, we get the Explorer 'cannot find website because you are not connected to the internet' error page.  Even when we can't connect, the "local area connections" icon on the lower right side of the screen (Windows XP) says we have a network connection at 10.0 mbs.  The lights on the modem are all green, and the DSL light stays steady green, although sometimes the internet light will blink erratically, and the wireless light always blinks quickly.  We recently switched out the cable to the jack, so it's not that. 
    Sometimes we can get it to get back a connection briefly by doing one of these things (but they don't always work):
    - use the "repair" button on the local area connections window support tab -- this will often get it back for a few minutes but is rarely permanent.  When it doesn't work, it usually says it's because it can't renew the IP address
    - turn the modem on and off.  That's what worked this morning.  It did not work last night.
    - turn the computer on and off.  That worked last night only to get an initial connection that then pooped out.
    - use the verizon support popup that sometimes (and only sometimes) appears when we're having connectivity problems.  This morning that worked briefly -- the internet connection popped back up at the stage where the pop up siad "testing connection." 
    Any idea what is going on here?  I tried a couple months ago to get help through verizon online support, and it ended up as a 3 hour phone call to India that resolved things only for an afternoon, and not on any more long term basis, and I don't want to do that again unless I know what I'm asking for (since all they do is go through some kind of checklist). 

    I had similar probelm. I did find dns lookup is very slow. The following are consecutive tests:
    C:\Users\pchen>nslookup www.verizon.net
    Server:  dslrouter
    Address:  192.168.1.1
    Non-authoritative answer:
    Name:    www.verizon.net.westell.com
    Addresses:  63.251.179.13
              8.15.7.117
    C:\Users\pchen>nslookup www.verizon.com
    Server:  dslrouter
    Address:  192.168.1.1
    DNS request timed out.
        timeout was 2 seconds.
    Non-authoritative answer:
    Name:    a1280.g.akamai.net
    Addresses:  205.177.69.56
              205.177.69.66
    Aliases:  www.verizon.com
              www.verizon.com.edgesuite.net
    C:\Users\pchen>nslookup www.google.com
    Server:  dslrouter
    Address:  192.168.1.1
    Non-authoritative answer:
    Name:    www.google.com.westell.com
    Addresses:  63.251.179.13
              8.15.7.117
    C:\Users\pchen>nslookup www.bloomberg.com
    Server:  dslrouter
    Address:  192.168.1.1
    DNS request timed out.
        timeout was 2 seconds.
    DNS request timed out.
        timeout was 2 seconds.
    DNS request timed out.
        timeout was 2 seconds.
    *** Request to dslrouter timed-out
    -- when I got disconnected from internel (even westel 327w showsInternet Status: Connected DSL link:  Connected Speed (Down/Up):  3356 Kbits/sec by 843 Kbits/sec Connection Type:  PPP

  • Losing WLAN connection all the time

    Hi there!
    I've seen similar issues discussed here but I couldn't find a solution anywhere. So excuse me if I bring up an existing discussion again.
    I bought a Time Capsule 1TB last year. Since then, the WLAN never ever worked very well.
    I've configured the WLAN like this:
    - *802.11n (802.11b/g compatible)* because my MacBook is the only device that supports 802.11n
    - *Personal WPA2*
    - Multicast-Rate 2MBit/s
    - *WPA-Group Key timeout* 1 Hour
    - Channel is selected automatically
    - Setting to *Avoid interference* is activated
    So far so good, my WLAN works fine, every wireless device can access the network without any problems. Then, suddenly, I lose connection on every wireless device (mostly when I don't use the WLAN for a few hours, and when I get back, connection's lost). When I connect devices by cable, networking works fine, so it's just the WLAN. On my MacBook the Airport symbol is greyed out, meaning I have no connection. When I click on it I can still see my WLAN SSID, but when I choose to connect I get asked to enter the key which is saved in the Keychain. I do this and press connect, a timeout occurs. After rebooting the Time Capsule 2 or 3 times and a bit of luck, my WLAN is back working again.
    I live in an appartment so there are a bunch of WLANs around. 10-15 I guess.
    This happens several times a week and I can't figure out why.
    Has anybody an idea what could cause this?
    Thanks for your help.

    Suddi, welcome to the discussions!
    A few suggestions:
    Try turning interference robustness off to see if this might help. Robustness tends to slow down the network.
    If you have 10-15 visible wireless networks in your area, your airspace is very overcrowded. Add to this the fact that most newer routers allow a wireless network to be "hidden" and you may likely have 20+ networks competing for airspace.
    Since you need to use the 802.11n (802.11b/g compatible) mode, download iStumbler, www.istumbler.net to get a look at the networks in range and what channels they are occupying. If you find that your network is using the same or an adjacent channel as other networks, try changing your channel using AirPort Utility to a setting that is as far away as possible from other networks. This may be very difficult with the number of networks that you are competing against, but your options are unfortunately quite limited and you may need to consider ethernet connections for reliable system operation.

  • HT204088 why does this very poorly managed site loose my password all the time ???  i put it in correct!!!!!!!!!!!!!!!!!

    i used the correct password but as usual this crappy site screws it up it is 5 times in 3 months?????

    Jglee,
    I can understand how connecting to Wi-Fi is very important to maintain better control of your GB. I appreciate all the troubleshooting you have already tried to get this issue corrected.  Does your 4s have the most current software?  You can check this in setttings: Settings>General>Software Update.  Keep us posted.  We are here to help.
    YareliM_VZW
    Follow us on Twitter at @VZWSupport

  • Bluetooth Doesn't connect all the time

    My Ford MobileEase Bluetooth in my car only works some of the time. I got it paired up fine but it doesn't always connect and even when it does connect it will sometimes just disconnect. My 3GS worked fine with iOS3 but not with iOS4 only the OS has changed so it is not a hardware issue
    Any suggestions?

    Maybe when they ban Taxi Drivers from using their In-Car computers and ban Cops from using their In-Car computers, then they can ban people from using hands free phones.  Plus they better ban people from changing the radio station in their car, and whilst they're at it.....might as well ban people from adjusting their air conditioner. 
    Pretty ironic that you can't use a hands free phone in your car, but yet you can use a CB Radio!
    Maybe they should look at enforcing laws that are applicable to everyone and not just selected groups!  But I suppose they do have budgets to meet!  :-)

  • WRT54GX2 slow connection all the time, even when right next to it.

    My connections are always dropping since I bought the router. Even when I am close to the router the connection is still slow. I keep my PC optimized always so I have ruled out the laptop. Are there any setting changes that I might try? I use my wireless connection only for my laptop.
    Here are the stats:
    WRT54GX2 - Firmware 1.01.18 
    Not sure what version I have (ver2 or ver1)
    Connection Type - PPPoE
    NAT - Yes
    Unique SSID
    G-only
    Channel - 11
    Broadcast - NO
    Security Mode - WPA/WPA2
    MAC filtering - YES
    Basic Rate - set#2
    Trans Rate - AUTO
    Beacon Interval - 100
    DTIM - 1
    Frag Thres - 2346
    RTS Thres - 2347
    Laptop - IBM Thinkpad Z60M w/Atheros card
    Thanks in Advance!

    I used to recommend that "SSID Broadcast" be disabled for security reasons.  But newer cracking methods have made this old trick practically worthless.  So set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.  You security comes from using WPA/WPA2 and a strong password.
    Windows XP requires a patch to properly run WPA2. Go to Microsoft Knowledge base, article ID=893357 and it will direct you to the patch.
    Sadly, the patch is not part of the automatic Windows XP updates, so lots of people are missing the patch.
    Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, microwave ovens, wireless mice and keyboards, wireless speakers, and your neighbor's wireless network. In rare cases, Bluetooth devices can interfere. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
    In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
    Also, try to locate the router about 4 to 6 feet above the floor, in an open area. Do not locate it behind your monitor or near other computer equipment or speakers. The antenna should be vertical.
    If the above does not correct your problem, download and install the latest driver for your wireless card.
    If you are still having trouble, download and install (or re-install) the latest firmware for your router.
    Hope this helps.
    Message Edited by toomanydonuts on 08-04-2007 02:55 AM

  • Magic mouse lost connection all the time

    I have an iMac for 2 years, my magic mouse always lost the connection and the battery was always fine. I thought that was normal, and then I talked with some friends and they told me that this problems did not happen with them.
    So, how could I fix it?
    Thanks!

    UPDATE and additional info: This problem is still occurring.
    Apply have been completely unhelpful so far, after a second phone call, I was just told (again) to restart my MBP, unpair and repair my mouse, and insert fresh batteries. I've also done the SMC and PRAM resets several times.
    I'm using my MBP in clamshell mode connected to a BenQ GL2460 monitor. Running my MBP slightly ajar seems to temporarily help with he mouse lagginess but the problem soon reoccurs.
    I've tested my mouse on a friends earlier model non updated MBP and the mouse works fine.
    I went out a bought a Microsoft USB mouse and the same lagginess happens with it, albeit a lot worse.
    I'm currently running both mice connected via bluetooth, which actually seems to be minimising the magic mouse lagginess, but the Microsoft mouse is still very laggy. So I wonder what having two mice connected simultaneously is doing?

Maybe you are looking for

  • Error while saving project in cProjects

    Hello, I am getting following error while saving a project in cProjects- Access via 'NULL' object reference not possible. Details of the error are given below- Can somebody please help me resolve this error? Thanks and regards, Milind Dumbre Error an

  • Error when deleting a record:  "FRM-40202 Field must be entered"

    Dear all, please I need your help in this little problem. I am using Forms 10g , and I am having an issue when deleting a record at runtime. It is giving "FRM-40202 Field must be entered". I have reviewed the code but still cannot guess what could be

  • Will you finally fix these bugs?!

    I was patiently waiting for fixes since 5.x... but now I see that you won't do anything if we don't say something about it... I have iPhone 4 with iOS 6.1.3, so: - Cellular Data settings (APN, Username and Password fields in Cellular Data, MMS and In

  • Cannot change charset from 'ISO-8859-1' to 'UTF-8' ?

    I've programed a web application with Facelets. As I start the first page "index.html" I got the following exception: "java.lang.IllegalStateException: Attempt to change ContentType after calling getWriter() (cannot change charset from 'ISO-8859-1' t

  • Successful DSL Setup With Westell 6100G and Linksys WRT54G Router

    After a week of searching I finally figured out how to get DSL setup with my Linksys router. All I could get out of the Westell > Linksys router configuration was DSL downloads limited to less than 0.2 Mbps.   No matter what I did on the router setti