Loosing accountinformation during Movie. Movie stopps ! What to do ??

Weird.
Does an error message appear and what does it say?
Is it an internet disconnect or a disconnect of your iTunes Store account info.
If the latter, I'd try restarting AppleTV by unplugging at mains, if still problematic try a factory restore via itunes using a microUSB cable.
AC

Similar Messages

Security deposit transfer during move-in

Hi All,
My requirement is to transfer security deposit automatically during move-in/move -out from EC60.I can transfer the same from FP40 , but I want to transfer this automatically through EC60.
In move-in control parameter , I have already set the automatic transfer of SD in configuration.What else I need to do for this?
Also before transfer through FP40 , I need to release the same and the SD will be transferred to new contract account without any restriction.If I want to place the restriction again, what I need to do?

Banasri:
using the move control parameters, you will be able to control the deposit transfer automatically when the move in/out occurs. The contract on the original deposit (request and/or payment) will be updated to the new contract.
regards,
bill.

STMS - ERROR: stopping on error 12 during MOVE NAMETABS

Hello,
my STMS suddenly stopped working and is giving following error messages:
This is tp version 372.04.71 (release 701, unicode enabled)
ERROR: stopping on error 12 during MOVE NAMETABS
stopping on error 12 during MOVE NAMETABS
tp returncode summary:
TOOLS: Highest return code of single steps was: 12
WARNS: Highest tp internal warning was: 0118
standard output from tp and from tools called by tp:
Checking logs showed:
2 ETP399 -
DB-COMMIT() -
2 ETP399 -
DB-ROLLBACK() -
2AETP344 dbslerror "26" occured at location "LOC095"    (object "DDXTT")
2 ETP301 -
3 ETP361 "0" Shadow-Nametabs activated, DDL executed
2 ETP362 "6" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2010/11/26 18:43:30")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2010/11/26 18:43:31")
2 ETP301 -
2 ETP301 -
And
=====================================================================
Update fails (mode flag   to V in DDXTT. Table: /BEV3/CHBPAKNA1S)
Result   /BEV3/CHBPAKNA1S:    Action: CNV      Mode flag: V    Return code: 0
(many entries similar to that).
Any ideas what can be wrong?
Looking forward to any tips!
Regards,
FS

Had to activate manualy objects from DDXTT. Now its working

Error during movie encoding - tried all the common things, any suggestions?

HI, Attempting to burn a DVD from iDVD 7.11
I'm getting the "Encoding Error: There was an error during movie encoding" dialogue at the end of an attempted burn. Tried several times and many of the suggestions already on the forum
I have "shared" the movie from iMovie. When it first opens iDVD I have to change the default setting of "best Performance" to "Professional Quality" and the video mode to PAL (I'm in Australia). I change it both in the preferences pane (a change which seems to be ignored when I restart the program) and in the project info.
- I'm trying just to make a disc image, but haven't got past this first step to getting it to DVD...
- There is only the movie in my project (I've not added audio or pics in iDVD)
- I've used the "Modern" theme and deleted the default drop zones and menu audio,
- I've checked the chapter markers are not at the start of the movie or near any transitions,
- There are no special characters in the titles,
- All titles and menus are within the TV safe zone,
- I've deleted the com.apple.iMovie.plst files and emptied trash,
- I've tried deleting encoded assets,
- Repaired permissions, restarted the computer, checked for updated software,
- (tried a "safe boot" as someone suggested somewhere, but the program couldn't find the movie or audio files),
- I have 660GB free on the main hard drive,
- I've disconnected external drives,
- no error appear in map view,
- I preview the project and all appears fine,
The original footage was filmed for me. I was given a DVD which I ripped into an MP4, import into iMovie, edited the audio, added AIFF audio, added a jpeg image and 2 transitions. (Unfortunately the audio on the original I was given is unusable, else I could just copy the DVD I was given.)
So if anyone has further suggestions as to what might resolve this issue, please let me know!

Thanks for your post F, much appreciated
The project is 123 minutes, 4.16GB and it's being broadcast on TV, so I need max quality I can get (without spending money!)
I think I have sort of solved the problem - addressing what you've identified in a slightly different way.
Since my previous post, I noticed that clicking on the "Media" tab in the side pane, and selecting "Movies", my project was listed, but when I clicked on it, rather than the thumbnail I get on other movies I've processed, I got this text:
"This iMovie project can't be used because it hasn't been prepared for sharing yet. To prepare it for sharing, open it in iMovie and choose Share > Media Browser.... "
I did that (7 hours processing) then successfully created the disc image (2 hours processing). I have now burnt the DVD using disc utility (1 hour processing). It plays OK on the computer, but I'll need to check it on a normal player before marking this as thread solved (I don't have one here at home).
Unfortunately somewhere in all this processing the video has significantly lost quality. I thought I'd used all the highest quality setting, but will have to go back and check each step again. Unless someone reading this post has noticed anything I've done so far that would compromise video quality. The audio is fine - which for this project is the most important aspect.
So in regard to my initial problem; it seems there is a problem in iDVD not recognising/remembering the set preferences when using the "Share > iDVD " function in iMovie.
To summarise my solution for anyone else who experiences the same issue,
When sending a project from iMovie using "Share > iDVD " it seems you must also choose "Share > Media Browser.... "
This may be specific only to the case where PAL is required.
PS
I should also note, incase it made any difference, that I found the default headings in the chapter menus had dashes in them (i.e. it defaults to "Scenes 1 - 6", so I changed to "Scenes 1 to 6"). The only other modification I made since my original post was using stills instead of moving thumbnails for the chapter selection.

"Error during movie encoding" help pls?

Hi,
sorry if this is a repost but i have looked through all the other threads taken on board all the advice and still coming to the same result. im hoping there is someone who can help? its driving me a bit mad tbh
this is where im at:
- have 63gb of free disc space
- have repaired disc permissions
- no errors on map image page
- all files work in quicktime and itunes
- all MP4 (h.264, mp3 audio, 16:9) coversion done in mpeg streamclip
- does not exceed the space allowance in 'project info'
- have tried moving the iDVD pref file to the desktop (with app closed)
- Tried 'deleting encoded assets'
- cleaned dvds.
- iDVD version 7.0.4
- disabled chapter markers
- using verbatim DVD-R discs
- tried slower burn speeds (x4)
- tried burning a disk image as well as straight to disc
keep on getting the same issue "error during movie encoding"
can anybody help?
thanks in advance
c

You've tried all the things we usually suggest.
all MP4 (h.264, mp3 audio, 16:9) coversion done in mpeg streamclip
I suspect something is wrong with this conversion. What was the original video source?

How to hide TOC during movie loading

Hi All,
Is there a way to hide TOC (rendered outside of the main clip) during movie loading? I wanted TOC to appear either as the whole clip is loaded or when the first slide is opened.
Any suggestions, please?
Thank you
Andy

I have just tried to do this today actually but was unsuccessful.
I wanted to disable the possibility of the user to navigate from the TOC before the entire course had loaded. I have some information on the first slide that I want the user to see, but now they can just skip by clicking a link in the TOC before all the content has been loaded.
Initially I thought that the variable cpLockTOC could be used to atleast disable the TOC interaction since the decription is "Enables/ disables user interaction on TOC". However, no matter what I tried it didn't work.
I tried to set the variable directly in Captivate on the first slide, but the TOC is actually loaded before the first slide so that was unsuccessful.
The I tried to set the variable through JavaScript from the HTM file, but that didn't help either.Navigation through the TOC is still possible even though the course haven't finished loading yet.
I can manipulate the TOC from within the Captivate movie by embedding some special Flash "animations" / Widgets I have. These can send commands to the TOC and for example open / close the TOC if you are using the overlay mode. They can also hide / show the standard overlay button, which isn't exactly pretty. I'm pretty sure that I could make a Flash file that would hide the TOC completely when run from within Captivate, but it won't help me because the content in the Captivate movie isn't loaded until after the TOC has loaded.
Manish - what is the function of the cpLockTOC variable? Isn't it to disable/enable the users interaction with the TOC alltogether? If so can this variable not be set from the HTM file on load?
/Michael
Visit my Captivate blog with tips & tricks, tutorials and Widgets.

GRRR! "There was an error during movie encoding"

I can't seem to compile and burn a DVD to save my life with iDVD. I have a video that I created and exported using iMovie and two shorter ones created in Photoshop CS6 — all three are the same encoding: 1920 x 1080, H.264, AAC, Color profile: HD (1-1-1). The one exported with iMovie is a .mov file and the other two are .mp4 files — none of them with any sort of copyright/permissions protection on them.
iDVD previews them all just fine, but EVERY SINGLE TIME I go to try and burn a DVD it gives me the above error message, "Encoding Video: There was an error during movie encoding" which tells me absolutely nothing. This might not stress me out so much if it were just a personal project, but rather it's for a friend's wedding that I shot and iDVD's failure to do a basic thing like encode video is really ticking me off.
I tried to localize the issue by trying to burn just the .mov file and then just one of the .m4v files — and have found it chokes on m4v files. Why is this so??
If I'm doing something wrong, the error message should give me a little more feedback than just "oh there was an error."

Hi
We are only Users - trying to help other users - rarely Apple or program developer drop in for a look so I would send feedback here
• www.apple.com/feedback/idvd.html
BUT as Apple discarded the product in all - can not even be bought any more - any further development is most certainly never to be.
But what You feed iDVD matters and - You and so many more has the idea that .mov or .m4v etc are movie formats/codecs - they are not - only containers - so to figure out what You give iDVD You need to find what's in them. I do like this
• Open them in QuickTime Player
• here open Inspector [cmd+I]
• read - Video Format/Codec: nnnnnnn
What does it say and in what frame rate (fps) ?
iDVD can only do good (very good) DVDs when feed
25 or 29.97 fps
interlaced SD-Video
So by feeding it 1920x1080 24fps - to make a NTSC (29.97fps) DVD - result will be very BAD. Conversion is of need. I use following programs to do this
• Frame Rate - JES_Deinterlacer
• MPEG Streamclip
• QuickTime 7.6 + Pro-upgrade
Yours Bengt W

Apple Tv stops during movie several times to load. Very ANNOYING

Why does my Apple Tv stop during movie several times to load. Very ANNOYING

This will be due to the network.
What is your current connection vis speedtest (needs at least 6mbps)
Make sure DNS is set to auto (setting - general - network)
If on wifi try ethernet

Every time I try and open up my itunes it will get stuck on lode. I am not able to click on anything or close down the page. I have to restart my computer. I have a new ipod and can't even downlode my music or watch my movies! what is going on?

Every time I try and open up my itunes it will get stuck on lode. I am not able to click on anything or close down the page. I have to restart my computer. I have a new ipod and can't even get my music on it or watch my movies! what is going on?
A box will pop up and tell me there is a new version of itunes to download, but i'm un able to click on that either

Hi Coreenfrombc,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden

I disconnected my iPad unconsciously while it was updating ios 7.0.4 and it just stuck on that screen showing apple logo and a loading bar that just won't move on what to do now ????

I disconnected my iPad unconsciously while it was updating ios 7.0.4 and it just stuck on that screen showing apple logo and a loading bar that just won't move on what to do now ????

It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
If that still won't work, post back with detailed information as to what exactly does happen as you go through the process.

Since upgrading to Yosemite I cannot get directly to Netflix. I get a message about having to download Microsoft Silverlight. I can't get that to work and don't want it anyway. I just want to open Netflix and play the movies. What should I do?

Since upgrading to Yosemite I cannot get directly to Netflix. I get a to Netflix and there is a big message about having to download/install Microsoft Silverlight. I can't get that to work and don't want it anyway. I just want to open Netflix and play the movies. What should I do?

I can't get that to work and don't want it anyway.
You need Silverlight. That is the application that plays the Netflix movies.
http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx

The banner in the iTunes store advertised the godfather TRILOGY for 9.99. I purchased and only got one movie. WHAT GIVES?? Why advertise a deal on the trilogy, then not deliver?

WHY IS THE ITUNES STORE ADVERTISING THE GODFATHER TRILOGY, AND UPON PURCHASE I GOT ONE MOVIE? WHAT GIVES??

The same thing happened to me. I purchased the Trilogy but it only downloaded the first movie.
Also i looked at my accounts "purchased items list" and it didn't show that i purchased anything.
When i went back to the store to look at the trilogy order page, it didn't say that i purchased it.
It just had the "buy" button.
I will wait a few days to see if i get an email from the iTunes store to see if Apple finds out that
they made a mistake. If i don't get an email, i will have to email iTunes support to see if it can
get this problem fixed.

The select function in Pages and other apps gets stuck and the cursor will not move. What do I do?

The select function in Pages and other apps gets stuck when I touch a word and the cursor will not move. What is the answer for this problem?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.

TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

I have edited a movie in Final Cut Pro and the video has been smooth all the time.
Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
What is wrong? All the sudden.

We need info, info, info!
What version of FCP X?
Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
Try exporting a master file and see if the video is ok.
Also, keep Activity Monitor open and see how much memory pressure you've got.

Loosing accountinformation during Movie. Movie stopps ! What to do ??

Similar Messages

Maybe you are looking for