Loosing Connection constantly!!!!!

Hello
We recently updated to a BT home hub from a wireless router (D-Link) we never normally had any problems before, we also updated to windows 7 after having homehub installed.. now we find we loose connection to the internet at least 20 times during the evening,all lights are on,on the hub, just the signal goes all the time, at forst we thought it would settle, but now its getting beyond a joke,does anyone have any idea why this may be happening,paying for a fast download service and seems were not getting a very good service at all!
Thanks
Marie

Try this link for help first off
http://bt.custhelp.com/cgi-bin/bt.cfg/php/enduser/cci/bt_adp.php?p_faqid=9692&p_sid=fa5qFlVj&p_lva=&...

Similar Messages

X4000b Bluetooth Mouse constantly looses connection

Hello there
My new Bluetooth Mouse constantly looses connection to my Asus Transformer Windows TabletPC. So the mouse Pointer stops moving and can be moved again after 20 seconds or so. Any suggestions on how to solve this?

Try resetting the PRAM and SMC.
Barry

TS3048 Wireless Keyboard constantly looses connection

My Apple Wireless Keyboard (Part Number: MC184LL/B) constantly looses connection (as often as once/minute; but sometimes it will stay connected for up to 20-30 minutes before cutting out).
Details
>It is 2' from my Macbook Pro.
>There's a Drobo next to the computer, but the cut-out happens whether Drobo is on or off.
>Battery indicator says keyboard is 100%.
>Thunderbolt Display in vicinity.
>Happens at multiple locations within my house.
>Error message is "connection lost"
Suggestions?

ACTUALLY: Problem is NOT FIXED.
Making the keyboard a FAVORITE helped--the connection goes down less often, but it still cuts-out, sometimes regularly. What else can I try?
Here's an RSSI readout, if that's of any use:

TS3048 My mouse looses its bluetooth connection constantly.

It will reconnect, but then disconnects again within seconds. Have new batteries, have tried turning off and on, restart computer. Keyboard is also bluetooth and is fine, so no disruption to bluetooth. It is driving me crazy..... can someone please help?

I've experienced a similar problem. The mouse doesn't automatically connect on restart, and looses connection. I have tried all the fixes I could research: remove the battery until it resets, delete the profile from the bluetooth menu, delete the preferences in both the main and user libraries, rebuild permissions in Disk Utility, and reset the pram (command-option-p-r while restarting before getting the start-up chime. There is another start-up reset command beyond pram, but I don't remember what it is.
The one constant was that it's identity from when it was used on another computer (which it never worked properly on either) would not reset to the current computer it was being used on.
If none of the fixes above work, your mouse is probably defective.

Keyboard looses connection says batteries low but just replace

Hi new iMac 21inch with wireless keyboard. Just started to loose connection wireless trackpad working fine. Comes up with low battery warning even though batteries replaced. Then cycles through connection and disconnection constantly. Happened after 10.6.8 upgrade.

Hello Nick:
I seriously doubt that the update to OS X 10.6.8 is the cause of the problem.
Try resetting the PRAM and SMC.
If that does not help, I would return the KB for a warranty replacement.
Barry

Brodband loosing connection

Hi
From last few days i have problems with my brodband. Home hub loosing connection (BT HH3.0) brodband icon start blinking on orange or just constantly light on orange. Im do all the stuff, reset HH, check all cables. Problem dissapired but back next day and now random back once a day or often.
I did speed test:
Download18.7Mb
Upload4.07Mb
my brodband is Unlimited Broadband with BT Infinity 2
normaly my speed was 60+ mb for download and 18Mb for download
im try quiet line test and you can hear some people talking or some music or melody its really quiet and some other noises.
Next i did btspeedtester but after give all details (postcode house nr) will get this:
No Fibre to the Premises (FTTP) services have been found at this address. Please check the postcode or use the Telephone Number or Service ID to conduct the test.
Anyone can help me?
Last thing, sorry for my eanglish im not my native.
Thanx.

another evening and test
up 7.74
down 1.90
ping 75.38
1. Best Effort Test: -provides background information.
Download Speed
7.74 Mbps
0 Mbps
12.67 Mbps
Max Achievable Speed
Download speedachieved during the test was - 7.74 Mbps
For your connection, the acceptable range of speedsis 40 Mbps-12.67 Mbps .
Additional Information:
IP Profile for your line is - 12.67 Mbps
2. Upstream Test: -provides background information.
Upload Speed
1.9 Mbps
0 Mbps
20 Mbps
Max Achievable Speed
Upload speed achieved during the test was - 1.9Mbps
Additional Information:
Upstream Rate IP profile on your line is - 20 Mbps
This test was not conclusive and further testing is required.This might be useful for your Broadband Service Provider to investigate the fault.
If you wish to carry out further tests,please click on 'Continue' button.If not, please close the window using 'Exit' button and contact your ISP for further assistance with these results.

Mouse loosing connection

I recently purchased a 27" iMac, which I love.
However, I am having some serious mouse issues. It constantly looses connection and just stops working till it reconnects which is anywhere from 1min to 5mins.
It's very annoying. What could be the problem? Is it something I can fix or is it maybe a defected mouse?
Any advice is appreciated
Thanks,
Jon

Depending your your point of view it could be considered "defective". Problem is you are not alone. There are many posts on the, er, deficiencies, of the MM. Google "magic mouse looses connection" and look at More Like This section on the right. Here's a 15-page thread on this topic in these forums:
Magic Mouse Loses Connection
Some of the problems appear to be a poor transmitter/receiver. Others seem to be due to problems with the batteries used. For example, different makes of batteries have slightly different lengths of the positive terminal (end with small "nib"). The tolerances are such that the slight length difference is enough to make the battery loose contact wth small movements of the batteries. Some have found putting a small aluminum foil ball inside to take up the "slack". Others have found different brands of batteries are less prone to the problem since they have larger positive terminals.
I do recommend always keeping a (cheap) wired mouse as a backup. Keyboard too if you use a BT keyboard.

WRT110 - I upgraded to new firmware and always loose connection

My router was running fantastic under 1.03 version never an issue. Then I figured i would check for updates and I updated. I wish I didnt. I constantly loose connection to internet and the router. I tried refashing several times. I read everything I can get my hands on. I would really like to get the previous version firmware bake to 1.03 if anyone knows where i can download it or has it. Any help would be greatly appreciated.
Thanks

When you Updated the Firmware of your Router, did you reset your Router. Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
I think this will solve your problem.

I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

Hi, stig2013.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Cheers,
Jason H.

Firewire device looses connection when external screen is inserted into the thunderbolt port? HELP

HI
I am a recording studio engineer. Ive got a Firewire AD/DA Converter (Focusrite Saffire Pro 56) running from my Firewire port of my MacBook Pro, which is running OSX Mavericks. I've also got an external Screen I want to use as an extended display. I'm using a HDMI cable from the screen to a HDMI to Thunderbolt Converter which I then plug into my Thurderbolt Port.
As soon as I plug the screen in, the Firewire Port looses connection completely and I cant use or even choose the Saffire Pro 56 as audio driver. Another thing happens where the Thunderbolt port replaces the Saffire Pro 56 Driver with the screen as the audio output source.
Please help, there's nothing I can find to fix this.
Thanks Maurice

You don't mention which model you have, but this is from the M-Audio Firewire 410 Manual Troubleshooting section:
The FireWire 410 has been designed to give you high performance and professional quality audio. It has been tested under a wide range
of systems and operating conditions. In the real world, however, there is a nearly infinite number of possible operating scenarios, any of
which could affect your system’s performance. Much like owning an automobile, “your mileage may vary.” This section can not begin to
cover all possible issues you may encounter, however we want to give you some suggestions on common problems you may experience.
One thing to avoid is connecting too many devices. The FireWire bus is a dependable, high-speed, high-bandwidth protocol which is ideally
suited for digital audio. Nonetheless, it’s important to remember that audio and multimedia streaming places considerable demands on
your processor and the FireWire bus. Although it is theoretically possible to chain many multiple FireWire devices in series, doing so may
potentially degrade your audio performance.
I guess this degradation could also affect the Firewire HD. Maybe there is a simple fix, but it sounds like the M-Audio people have been down this road before.

Wi-Fi loosing connection every few seconds on my macbook pro and its not my router's fault (running yoseomite)

Basically I bought my new Macbook Pro retina display in September 2014. My wifi was working perfectly well for about a month or two until Yosemite was brought out. I'm not sure if it was immediately after I downloaded Yosemite or not, but not long afterwards I noticed I was having trouble with my wifi (and not just mine but my schools as well). Every time my computer tries to join the wifi network it will work for a while (5 seconds) and it will say that I have a wifi connection but then it will just stop working and it will say I'm not connected to wifi. A few seconds later and it will then reconnect and say I have wifi. I am fairly certain this is not my wireless router ( a BT home hub) as I have other devices such as my iPhone and a computer which does not suffer these problems. After a while of it loosing connection and then gaining connection it will finally stop and the wifi icon at the top will suggest I have a wifi connection but when I hover over it, I see it says "Wi-Fi:looking for networks..." and then 2 seconds later it will say "Wi-Fi: On" and it will repeat like this for however long I am on the network. When the icon appears to suggest I have a connection I am able to load a webpage but it is slow and watching Netflix can be tiresome. I've scoured these forums for information that will solve my issue however all I have found is outdated information from 2010 or 2012 or too technical information that I can't understand. Does anyone else have this problem, has anyone else found a solution, it would be much appreciated if any one could help me solve t.

Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Be sure to test on more than one Wi-Fi network, if at all possible. A desktop computer can be tested with a mobile hotspot, such as the hotspot created by a cell phone. If the problem only exists on one network, then the access point of that network should be the focus of your attention, not the computer.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter tab, if there is one. Uncheck the box marked
Wake for Wi-Fi network access
if it's checked.
Step 5
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 6
In the Wi-Fi settings, select
Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local
Click OK and then Apply.
Step 7
Reset the System Management Controller.
Step 8
Reset the PRAM.
Step 9
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first. Turn Wi-Fi off and then back on. You'll be prompted for the password when you reconnect. Save it in the keychain.
Step 10
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

Loose connection between Mac Mini and Apple TV 2

Help! I have a new Mac Mini 2.5 ghz running Lion and Apple TV2 hooked up to my 32 inch LG TV.
Before I got the Mac Mini, Apple TV was running just fine on the same network with my Win 7 machine.
Ever since I got the Mac Mini and I run the Apple Tv at the same time. I loose connection on both. My cable provider replaced the router and all my other Win 7 machines run just fine on a wireless network. I might also add that when the apple tv and mac mini goes down, my ipad 2 goes down too. Of course, air play doesn't work . It comes and goes.
I have a 2nd Apple TV 2 and hooked that up to the same tv with the same results. I have called Apple many times. They are helpful but not been able to solve my problem. The cable provider and I have traced down to a conflict between the Apple TV, Mac Mini and the IPAD 2 .
Does anyone have any ideas what may be wrong?

I have had multiple ATV's, desktops, laptops, and i Devices all running at the same time without a problem. Typically on a network when you start 2 devices and the connection crashes it is an IP problem. Check the IP address on both devices and see. It is usually easiest to have the router assign IPs automatically using DHCP. The router, computers, and ATVs should also be set to DHCP.
If everything is set to DHCP try disabling DHCP and assign fixed IPs to each device.

Help. Changing subnet mask looses connectivity.

HI,
I know this is basic but is giving me a lot of head ache.
I had a /30 between the Router(3925) and the ASA(5515).
Installed EHWIC on the router to support ASA failover.
I loose connection when I change the mask at /29.
So currently the vlan interface at the router has address 10.xx.xx.xx/30 and ASA interface has 10.xx.xx.xx/29.
This works fine but the moment I change router's mask to /29 it looses connection.
Cant figure out why and I have checked all I could.
- Did shut/ no shut on the interface
- Speed/Duplex settings are set to auto both sides.
Its frustrating. Please help.

Chris,
Pasting below relevant config of both the router and the ASA.
Router
interface Vlan10
description Router_FW1_FW2
ip address 10.xx.xx.2 255.255.255.252
ip access-group 120 in
ip nat inside
ip virtual-reassembly in
interface GigabitEthernet0/0/0
description ASA_Primary
switchport access vlan 10
no ip address
access-list 120 permit ip any any
ASA Config
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 10.xx.xx.1 255.255.255.248
route outside 0.0.0.0 0.0.0.0 10.xx.xx.2 1

MacBook MB466LL/A has loose connection Any suggestions?

MacBook MB466LL/A has loose connection in screen producing line down the middle, if I mess with it (or even wedge something between hinge by the power button) it goes away. Repair center wants to replace whole thing which I can not afford. Any suggestions?

Have you used Software Update to update to 10.7.1. That update was suppose to fix some WiFi Issues. http://support.apple.com/kb/HT4764

IMAC looses connection to Printer

Computer will not print and seems to lose connection to the printer. I deleted all printers and made a new printer connection. Printer has address 192.168.0.14. Later IMAC looses connection to printer again. I look at address on printer and it is now 192.168.0.15. Its done this several times. So why does the printer keep changing its address? Is there a way to set it permanently?

Hi I may have found what you are looking for to set the printer up with a dedicated IP Address. The printer obtains the IP address from your router, I'm not sure why your router is reassigning the IP addresses so frequently.  All of the steps for troubleshooting the Printer Does Not Maintain Wireless Connection are on available on that document, but I have copied the basics on setting up the Static IP address. (Solution five: Assign the printer a static IP address) You can review that document and try the other solutions if you continue to have connectivity issues. Locate your printer's current IP address, which you already haveOpen an Internet browser (Safari, Chrome, Firefox, etc.) on your computer.Type your printer's IP address in the browser's address bar, and then press Enter. The Embedded Web Server (EWS) opens.Click the Network tab from the EWS navigation menu.In the Wireless section, click the Network Address (IP) or IPv6 configuration, depending on your network setup.Click Manual IP, and then click Suggest a Manual IP Address.
A manual IP address, Subnet Mask, and Default Gateway displays.Don't forget to save or apply the settings I believe you might want to try to refresh your network connection afterwards. Power cycling your router allows it to reestablish a fresh connection to all of your devices. Here's how to power cycle your network if you are unsure: 1) Unplug the power cable from your wireless router (NOTE: Do not reset the router)
2) Do the same for the printer
3) Shut down the computer
4) First plug the router back in, and wait for it to fully power up
5) Then plug the printer back in and wait for the wireless light to become solid.
6) Once both the router and printer are on, go ahead and turn the computer back on  Check to make sure the manual IP address has stayed on the printer.
You may also have to remove and add your printer in Printers and Scanners.Open your System Preferences, click on Printers and Scanners.Click the name of your printer, click the minus sign (), and then delete the printer.Once the printer is removed, click the plus sign (), click Add Printer or Scanner, click the name of your printer  Please let me know if these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!   Thanks,

Loosing Connection constantly!!!!!

Similar Messages

Maybe you are looking for