Loosing contact with voip server

When the screensaver goes active on my phone it seemes to drop the contact with the sip server. When looking on the icons of the phone it seemes to have contact, all the icons that shuld be on the display are ther. I can make calls but don't recive them.
When I have made a call it works to recive calls untill the screensaver goes on again.
Anyone know if there are any solution to this?

According to System Status there have been problems with Connect during last week. Who can tell the effect of....
Incident #2013110601 Resolved
11:09 PM - 11/6/2013
We have resolved the incident affecting the following:
Performance
Adobe Connect - Meeting (NA3, NA4, NA5, NA7, NA10, NA11)
Incident #2013110601 Reported
6:22 AM - 10/26/2013
We are investigating a reported incident affecting the following:
Performance
Adobe Connect - Meeting (NA3, NA4, NA5, NA7, NA10, NA11)

Similar Messages

HT1414 Since updating to iso6.0 I have had problems with my email exchange account syncing correctly - I keeps loosing connection with the server.

Since updating to iso6.0 I have had problems with my email exchange account syncing correctly - I keeps loosing connection with the server.

Are you losing the connection to iTunes on the iPad or the computer? You are saying that iTunes is updated. Of course iTunes is updated when you update the iOS software. That's a no brainer.
If you mean that iTunes is updated on the computer, that has absolutely nothing whatsoever to do with downloading and updating apps on the iPad itself so changing the date on the iPad, signing in and out of the stores on the iPad .... Doing any of that on the iPad would have nothing to do with iTunes on your computer.
If .... you have not been able to connect to the iTunes or app stores at all on the iPad - try this ...
Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If you can't connect at all - you can also try rebooting your router. Unplug it from power for about 30 seconds and then plug it in again.

How do I sync my contacts with exchange server?

I have a mac and an ipad and an iphone and my office is all microsoft and pc's. We are running outlook and exchange server. My email works fine. My calendar works "just ok" as it is quirky. The BIG problem is syncing my contacts on all three devices with my company's contact list which lives on the exchange server. What is the deal with this? Is there a work-around?

Let me fill in some blanks. I have a powerbook running Lion and using mail, addressbook and ical. My office is all on pc's and outlook and connected up on our network with exchange server. So here is the issue:
a. It first surfaced when we got iphones. Apple connects to exchange server's email and calendar relatively well but we have a COMPANY contact list that works great on exchange and outlook on everybody's PC's but DOES NOT work with the iphone unless you buy a third-party app that costs like $300.
b. THEN, I decided to get a mac and I have the same problem with the native apple applications (mail, addressbook and ical). Everything works EXCEPT addressbook. Basically, I have to create a fully redundant addressbook that will not talk to the exchange server company contact list.
So my question is really this: I don't want to have a separate contact list for my company contacts that does not sync with the mother ship. I don't like not having all my contacts on all my devices. It seems that there is a problem between the global contact list in exchange and my addressbook contacts on my apple devices.
Does anybody know about this issue and does anybody know how to solve?

Aperture looses contact with masters imported in Library

I working with aperture 3 and since a couple of month aperture loses contact with imported master/pictures. At first I thought it was because i left the originals/masters in my time machine. But recently i imported pictures in my aperture library. Opening aperture now aperture says my pictures are not on line so I can't control my metadata. Please give me some clue or help to tell me what I do wrong

Hi Dick. Can't say from the information you've provided. This line, though, gives me fibrillations:
DickBasart wrote:
At first I thought it was because i left the originals/masters in my time machine.
What have you been doing? Where, exactly, are your Images' Masters stored? What volume is reported when you right-click an Image with an off-line Master and execute "Show in Finder"? What path is shown at the top of the dialog when you select an Image with an off-line Master and execute "File→Locate Referenced Master ... "?

Calendar has lost contact with the server

All has been working well till about 2 weeks ago. I have iPhone4S, iPhone5 and iPad mini + iMac running OSX 10.8.3. all of which were synced to iCloud Calendar. I have not changed anything (as far as I remember). Now the Calendar on the iMac returns an error message "The server responded with an error. The server is currently unreachable or the connection is blocked". Calendar on each of the other 3 is working correctly through iCloud, all syncing together.
The Calendar on iMac will accept entries and operate independently of iCloud but there is no sync. Entries from the other 3 sources are not being written to the iMac nor the other way around.
Contacts and Notes are working correctly between all 4 sources and iCloud. So it seems that the iMac is linked OK to iCloud but Calendar & Reminders only are not.
Where should I go looking to determine if I have changed a setting for Calendar & Reminders that stops it talking to iCloud?
HollowFrog

You can manually backup contacts using My Contact Backup and email yourself the backup file and imported to outlook there might also be a separate app to backup calendar.
Have you tried resyncing outlook to iCloud?

ADF looses contact with BackingBean - 11G

I've a table component. For each row - i have 4 buttons -all binded to a backingbean.
If I do an update/refresh in IE - All the buttons stop working. It's like the ADF form loose the contact to the backingbean. I've tried different bean settings session, application, request aso. - nothing helps.
If I don't do and update or refresh - all works fine....
The logs says something like this:
22-09-2009 09:15:50 oracle.adf.share.jndi.MDSBackingStore isReadOnlyMDSStore
INFO: Read only backing store
Is there some kind of bean cache?
Rgds, Henrik
Edited by: hek123 on Sep 22, 2009 10:00 AM

Hi Henrik,
I think that the "Read only backing store" has nothing to do with your problem as in JDeveloper 11g it appears every time WebLogic starts an application.
All the buttons stop working.What does that mean? You get an exception or your methods are not called or the event is not processed at client side?
(If the latter one is the case, check your custom JavaScripts and af:clientListener configurations etc., because for example an invalid clientListener could prevent an entire table from working.)
Regards,
Patrik

How to use Icloud calendar and contacts with calendar server

Hi
I have a small network setup using a mountain lion server and a couple of mac mini's running snow leopard. In addition I have several iphones and ipads attached to the network.
I want to syn calendars and contacts accross all devices but dont want to use icloud for the private stuff. I have the basics working but can not get the general icloud contacts and appointments to sync on the mac mini's. Is there a way to sync this data or do I have to duplicate each appointment , one to icloud the other to the server address book and calendar.
I know that there is a way to sync snow leopard with icloud but I do not want all data on I could as some of it is sensative, so require to keep it internal.
Any help would be appreciated.
cheers

Thanks for the help
Not sure I have explained myself properly, I already have the server set up and have a local calendar and address book working.
The issue I am having is how to integrate it with the icloud address book and appointments.
for example,
I have an appointment at 10.30 with a client, I need to have this show up on all mobile devices and the local network mini's. As it stands I have to put it in twice, once in the icloud calendar and once in the local network calendar. I would like to be able just to add it once and it show on all clients.

No contact with DHCP server when using VPN Client

Pretty weird problem I discovered recently.
We use the VPN Client to connect to a 1841 router. Everything works fine except for one small thing.
The client do not send out _any_ traffic if the destination is the ip-address of the DHCP-server the client got its original ip-address from.
This is verified by Wireshark. A ping on the client do not produce any ESP packets towards the VPN concentrator. No matter what traffic you try actually.
Discovered this when wanting to use Remote Desktop towards the Windows Server that is the local DHCP server and was not able to connect. Then tested ping and still no response. That made me look closer and found out that I could not communicate at all with the DHCP server.
As I said, pretty weird.
Anyone else have seen this? Anyone have a solution? Right now I use OpenVPN instead when I need to control that server.
- Roger

Hi and thanks for responding.
Nothing here apart from being unable to send any packets to the dhcp-server. No problem sending to any other system on the same subnet. The same happens when I connect my pc to another subnet that is served by another dhcp-server. Then I can not connect to _that_ dhcp-server. I can then of course connect to the previous dhcp-server.
I mean _no_ packets are generated out the client at all if the destination are your dhcp-server. No problem with the packet being blocked by a firewall or anything like that. Ping another system on the same subnet as the dhcp-server and the client happily generates ESP packets and sends them to the vpn-concentrator.
I do not know if it was clear enough in the first post so I am saying it here: the vpn-concentrator gives out the ip for the vpn connection. The dhcp-server I can not connect to is the server that gives the client its ip-address _before_ starting up the vpn client.
We use this vpn system so the IT personell will be able to connect to restricted resources from their laptops anywhere in the network, also when using wireless.
This was discovered when one admin wanted to connect from his laptop to a server that also happened to be the dhcp-server that had given his laptop his ip address before he used vpn.
Should be easy enough for anyone else to test. Just ping your dhcp-server after starting the vpn connection. No RFC 1918 addresses of course, there must be a route from your vpn-concentrator to your dhcp-server and at least icmp echo must be open through any firewall/acl.
The vpn version is 4.8.00.0440 on Windows XP configured to not allow local LAN access. I might test this with other versions/OS'es when I have the time.
Regards,
- Roger

Macbook loses contact with OD server after wake

So, as the title states, I have a macbook on the lan that is connected via airport to an OD master. Problem is when I wake it up from a sleep it can no longer connect to the server. If I go into Directory Utility it shows "trying to connect to server" which eventually fails. The only way to reintroduce it to the server is to either restart or delete and reconfigure the server in DU. So far I have not found an error in the log files on either the server or the macbook....

Oh, if it were only that easy!
Nope, double checked and it is set up correctly. However, I might be inclined to think it might be a bug with wireless connections... Not sure how the server could tell the difference but worth a thought.

Numbers loose connection with the server (osx server 10.6.8)

Hello, I use numbers application on an iMac under 10.6.8, all updates done. The files are written to a intel xserve under 10.6.8. Here's my problem: When i use a file on the server, from time to time, numbers tell me that the connection to the server was lost and I can not save the changes to the server. I only have one solution: to save locally on the iMac and then copy it to the server. It is very frustrating and annoying. Do you have any idea to solve this problem, thank you all and see you soon,
Damien / Geneva

Damien,
Have you asked in the Networking Category of the Snow Leopard Discussions?
Jerry

I cannot contact of a mail client in Windows with mail server

when forming does the client in Windows say not to be able to contact with my server, is necessary to modify something but in Windows so that they are ?
I believe that the problem this related to smtp, goes log in critical there.
Apr 17 16:34:01 diogenes postfix/qmgr[2110]: fatal: scandirpush: open directory deferred/1: Permission denied
Apr 17 16:35:01 diogenes postfix/postsuper[2133]: fatal: scandirpush: open directory defer/1: Permission denied
Apr 17 16:35:01 diogenes postfix/qmgr[2134]: fatal: scandirpush: open directory deferred/1: Permission denied
Apr 17 16:36:01 diogenes postfix/postsuper[2164]: fatal: scandirpush: open directory defer/1: Permission denied
Apr 17 16:36:01 diogenes postfix/qmgr[2165]: fatal: scandirpush: open directory deferred/1: Permission denied
Apr 17 16:37:01 diogenes postfix/postsuper[2182]: fatal: scandirpush: open directory defer/1: Permission denied
Apr 17 16:37:01 diogenes postfix/qmgr[2183]: fatal: scandirpush: open directory deferred/1: Permission denied
Apr 17 16:38:01 diogenes postfix/postsuper[2198]: fatal: scandirpush: open directory defer/1: Permission denied
Apr 17 16:38:01 diogenes postfix/qmgr[2199]: fatal: scandirpush: open directory deferred/1: Permission denied
Apr 17 16:38:02 diogenes postfix/cleanup[2206]: fatal: defer: remove 608989EF4AE log: Permission denied
Apr 17 16:38:03 diogenes postfix/smtpd[2202]: fatal: unable to connect to the public cleanup service
Apr 17 16:39:01 diogenes postfix/postsuper[2230]: fatal: scandirpush: open directory defer/1: Permission denied
Apr 17 16:39:01 diogenes postfix/qmgr[2231]: fatal: scandirpush: open directory deferred/1: Permission denied
Apr 17 16:39:04 diogenes postfix/cleanup[2237]: fatal: defer: remove E7B7D9EF540 log: Permission denied
Apr 17 16:39:05 diogenes postfix/smtpd[2234]: fatal: unable to connect to the public cleanup service

A bit of an update with some more information for anyone who comes across this thread.
Connecting to my server (Windows Server 2012) from my Mavericks MacBook Air using smb://servername/sharename results in symbolic links on the share listing as empty. Direct folders within the share list correctly.
-- filestore
       |- directory1 (symbolic link)
       |- direcory 2 (directory)
       |- directory3 (symbolic link)
       |- direcory 4 (directory)
In this structue smb://servername/filestore/directory1 and smb://servername/filestore/directory3 will list as empty (when they are not) and smb://servername/filestore/directory2 and smb://servername/filestore/directory4 will list correctly, as they are true folders below filestore and not symbolic links.
Workaround
I've found a workaround which lets me still access the server correctly, but also suggests that the problem lies almost certainly with the implementation of SMB2 in Mavericks.
By connecting to the server via cifs://servername/filestore then everything works correctly, with symbolic links being honoured. Using smb://servername/filestore from the same client to the same server exhibits the faulty empty directory behaviour.
At least I'm operational for the time being, but hardly the best.

Contact With Server Lost? error

I have a workbook that contains several tabs. One of these tabs runs a query that displays approximately 4000 rows and about 100 columns. Although it took a full 2 minutes to run, the results were displayed. Recently however I encounter an error message that the page cannot be displayed and contact with the server has been lost. No results are displayed at all but I can the results if I export to Excel.
The Excel export is my short term workaround. I've noticed that if cut down the number of rows returned to 50 or even 25 that it runs properly but anthing reaching towards 100 rows per page will result in nothing displayed. Is there a buffer or something on the server side that I can increase or clear out? This report will only get larger over time so a short term and a long term solution would be appreciated.
ALSO: Does Discoverer support the STRAGG function?
Thanks

Hi Marcus
You have a number of questions here so let me try and give you some overall guidelines concerning performance.
1. Tables perform better than Crosstabs
2. Worksheets that contain Page Items perform worse than those than do not contain Page Items
3. Page Items that contain lots of items perform worse than Page Items that contain a small number of items
4. Complex folders perform worse than simple folders
5. Worksheets with lots of columns perform worse than those with fewer columns
6. The placement of data items in the Admin edition is important. In order of optimum performance place item here:
a) Side
b) Top of Side
c) Top
d) Page
7. Avoid very wide Crosstabs if humanly possible
8. Do not leave a workbook with partial drills, make sure all drills are collapsed
9. Parameters improve performance
10. Try to avoid worksheets that return in excess of 10,000 rows
11. Avoid calculations such as UPPER(:region) IN UPPER(region). If you are certain that an item is in uppercase then define it as such in the Admin edition and then only apply the UPPER to the parameter
12. Avoid worksheets that contain fan traps as these seriously impact performance
13. Do not create LOVs out of transactional tables. Rather you should define a LOV using special custom code
14. If you know SQL at all, examine your worksheet SQL in Explain Plan and see if there are any full table scans going on. If there are, fix them. You may need to create a view for this.
Ok, now that I have got the basics of performance out of the way, over to your particular issues. I have seen Contact with Server Lost messages continually ever since Discoverer first came out during the mid-1990s. This error normally happens in Desktop and is usually associated with either a genuine network issue or an out of memory situation. I wuold think that if you have 4000 rows and 100 columns that you might be pushing your luck if you don't have a lot of memory.
If you are using Plus or Viewer try setting the page size to 20 rows at a time. You can also try setting the number of rows returned to a lower number.
As for the STRAGG function. Discoverer can operate with any function providing that the function is either a) a standard SQL function existing within the database, or b) a user-defined function that has been imported into Discoverer and registered with the EUL. If you are able to go to SQL, type something like SELECT STRAGG('ABC') from dual and get an answer then this can be made available inside Discoverer.
The normal STRAGG function outlined below:
CREATE or replace FUNCTION stragg(input varchar2 )
RETURN varchar2
PARALLEL_ENABLE AGGREGATE USING string_agg_type;
is a user-defined function and would need to be registered with the EUL before it could be used within a Discoverer workbook.
Hope this helps
Regards
Michael

Keeping contact with controlling applet while u/l XML file via servlet

Hello everybody,
if I am thinking too complicated, please send me other suggestions. Here's the situation:
I already have a working applet for a metadata application, that is sending the contents of the client's textfields to a remote database via servlet communication. Now I want to implement the following:
-The users have some attribute data in form of an XML file
-I want them to upload this file to the server (I already have that functionality using the fileUpload libraries of Apache Commons) by calling the servlet from a pop-up html page (is there any other possibility to do the communication, i.e. getting files from the file system?)
-the XML file should be parsed on the server and the content should be sent back to the calling applet for previewing reasons.
-when the user gives his/her O.K. the data should be transferred to the database.
Now there are some obstacles to overcome: When I upload the XML file to the server, I loose "contact" with the applet, i.e. the file is not connected with the applet code in any way. This is not a problem, when there is only one user at the time, but with many users loading up their data at the same time, things could get tricky.
What I thought was to copy the XML file to a temp directory with a unique name, the name of which would be transferred back to the applet by another servlet that is called when the (upload)pop-up window closes. The name of the temp directory could be the ID of the applet thread (is there such an ID, if yes, how can it be retrieved?)
Any suggestions (or just shaking heads concerning my complicated construction ;-) )
Cheers and many thanks in advance
Jan

You may be able to read a file from the file system with the applet, but it may require you to sign the applet. If you can, then use an HttpURLConnection to the servlet and send the file that way.
On the server side, you could create a session object (wether you actually need a session or not), and use the session's id as the key id for the directory name for the uploaded file. Session IDs are unique per client, and if the client handles cookies, then the same session will be used from one request to the next.
session = request.getSession();
String sessionID = session.getId();The response from the servlet would be a link to the server-side file. If you are using the Applet to send the request, you could get the response and automatically view the new file. Otherwise, you could send a page to the popup window saying: "Click This Link To See Your File" type of thing.

I have anew iMac, less than 3 months old - over the past few days i notice my wireless mouse keeps looksing contact with the mac. why is this? anything i can do ?

I have a new iMac, less than 3 months old - over the past few days i notice my wireless mouse keeps loosing contact with the mac. why is this? anything i can do ?

thanks. battery level is ok. have just reinstalled the mouse..... as to whether the problem continues, i'll have to see over next few days......thanks for your help

Weird issue with Windows Server 2008 R2 Print Server

I have an issue with Windows 2008 R2 (VMWare Hosted) running Windows Print Server.
Prior to a small network change, the print server was working well, hosting about 80 different networked printers from various vendors.
We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers). The DNS servers never quite worked right and broke AD authentication to different servers, and was just a mess.
After rolling back we are not able to keep the printers online. If we ping them from the print server, the printer(s) never wake up, when a print job is submitted. If we ping them from one of the access switches, they work fine (until they fall back asleep),
to prevent this, if we start a ping on the server AFTER waking them up from the Switch Ping, they stay online and no problems.
If we stop the ping, they fall back asleep at some point, and again, won't wake up without intervention/switch side ping.
Has anyone experienced anything like this? Any tips on how I could possibly resolve it?
Thanks in advance.

Hi,
According to your description, the issue seems to be that the printers can't keep online. Sounds like a power managerment issue. Why these printers fall into sleep? Have you consulted this issue with the manufacturer of these printers? Do these printers
fall into sleep if them lose the contact with printer server? Have you tried to reset the printers?
>>We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers).
DNS client will cache the recently queried records. If the DNS server has replied with a wrong records, communication issues will occur. To clear the DNS cache on a Windows device, please run the command below:
ipconfig /flushdns
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Loosing contact with voip server

Similar Messages

Maybe you are looking for