Loosing part of the path when opening a page? 404 Error?

When we open files in a particular folder on our website in Contribute CS4, it looses part of the path.  So Contribute is working fine for everything that we can tell, EXCEPT, one folder (for example, http://www.website.com/P-S/Ballard/)... When we try to edit anything under that folder, it automatically discards the part of the path that reads /P-S/Ballard/ and therefore cannot find the file and gives a 404 error.  I've even tried to manually edit the path, and it will still discard that part.  It wasn't doing this before, AND every other folder under P-S seems to be working fine and not doing this.
Also, when we create a new page, the background is grayed out on the page (the template we use doesn't seem to work).
We just upgraded to a new server.  They cannot find anything on their end.

This has been solved.  It was a server issue.

Similar Messages

  • How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

    how to solve the problem when opening program illustrator cs6
    ERROR: 16
    It is WINDOWS 8.1 / 64 BIT
    help please

    Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
    02/14/14 07:20:26:474 | [INFO] |  | OOBE | DE |  |  |  | 8860 | DEVersion: 5.0.0.0
    02/14/14 07:20:26:475 | [INFO] |  | OOBE | DE |  |  |  | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
    [    8860] Fri Feb 14 07:20:26 2014  INFO
    ::START TIMER:: [Total Timer]
    CHECK: Single instance running
    CHECK : Credentials
    Load Deployment File
    CHECK : Another Native OS installer already running
    Create Required Folders
    Assuming uninstall mode
    Lookup for master payload
    [    8860] Fri Feb 14 07:20:26 2014 ERROR
    DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
    [    8860] Fri Feb 14 07:20:26 2014  INFO
    :: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 1 error(s), 0 warning(s)
    ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
    Please search the above error/warning string(s) to find when the error occurred.
    These errors resulted in installer Exit Code mentioned below.
    Exit Code: 33 - The product is not installed, cannot uninstall.
    Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

  • When opening XHTML page, getting error message "Attribute ....space not declared for element 'pre' "

    Hi all,
    We are trying to use XHTML to author some of our documentation.  The plan is to use FrameMaker to convert the docs to PDF format.
    The input file contains the following offending line:
    <pre xml:space="preserve">
    This should be allowed according to the www.w3.org/1998/xhtml spec.
    The actual FM log message is:
    Message: Attribute '{http://www.w3.org/XML/1998/namespace}space' is not declared for element 'pre'
    Any hints?  I am using Frame Maker 9, by the way.
    Thanks,
    Frances

    In case anyone is interested the base solution given by dvohra09 can be expanded to solve the problems.
    (1) It appears the parser raises errors against any unknown attributes, including xmlns:xxx="...". Solution is either to declare them in the dtd element you would like them to appear in (as in answer from dvohra09 ).
    (2) You have to explicitly force the tags in the DTD into the correct namespace using prefixs to ensure the correct ones are picked up , e.g.:
       <!ELEMENT nstag:mytag (mysubtag+)>
       <!ATTLIST nstag:mytag   xmlns:nstag CDATA #FIXED  "http://www.someOtherURI.com/xxx">
    you then have to refer to the tag as <nstag:mytag>.
    This doesn't appear to be how the XML/namespace specs (or the slideshow example) say it should be. They imply (1) should silently declare the new namespace prefix, and (2) should work without prefixes because the DTD filename is used as an explicit namespace.

  • I usually have 3-4 tabs open which I am saving to read later. But I loose them all the time when firefox crashes or when another appliaction opens firefox to download. Is there a way to save my tabs ?

    I usually have 3-4 tabs open which I am saving to read later. But I loose them all the time when firefox crashes or when another appliaction opens firefox to download something and it will discard all my tabs. This is incredibly annoying, is there a way to save my tabs ? or get them back when there is no "restore session" button ?

    In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
    To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • Vs2010 azure project remove instead of unload now cannot find a part of the path build error

    I know this isn't a vs online question but I wasn't sure where else to post this one...
    I have an azure project built in vs2010 with a web role and worker role project. I accidently removed the worker role project then re added through 'add existing project'. Now when I try and build I get
    Error 1   Could not find a part of the path 'C:\Users\Mat\Documents\Visual Studio 2010\Projects\MvcApplication7 - Copy (4)\CubeCloud1.Azure\WorkerRole1\'.    C:\Program Files\MSBuild\Microsoft\VisualStudio\v10.0\Windows Azure
    Tools\1.8\Microsoft.WindowsAzure.targets    987 5   CubeCloud1.Azure
    Line 987 is the start of the  element.
    Looking at the path, the folder WorkerRole1 doesn't exist but looking at back ups of this project it doesn't exist in them either.
    I've tried adding the WorkerRole1 folder but then I get  Error 102 CloudServices38 : The entrypoint dll is not defined for worker role WorkerRole1.    C:\Program Files\MSBuild\Microsoft\VisualStudio\v10.0\Windows Azure Tools\1.8\Microsoft.WindowsAzure.targets   
    987 5   CubeCloud1.Azure
    I'm not sure going down the path of adding this folder anyway is the correct solution (I could be wrong of course).
    thanks,

    I don't know why this worked but I made a copy of the solution. When I opened the solution it had lost a reference to one dll (Windows Storage I think). I added that, then it builds ok now.

  • System.IO.DirectoryNotFoundException: Could not find a part of the path 'D:\SavingTextfile\sampletext_44.txt'.

    HI,
         I am writing Some orders into
    Text file under button control.It was writing under
    file system under my physical directory. suddenly i got error :
    Could not find a part of the path 'D:\SavingTextfile\sampletext_44.txt'. 
    I wrote in web.config file:
    <Appsettings>
    <add key="OrdersList" value="D:\\SavingTextfile\\sampletext.txt"/>
    </Appsettings>
    In Local system,i am storing like this:
    D:\sampletext
    My Code:
     protected void btnSubmit_Click(object sender, EventArgs e)
             string Orderslist = System.Configuration.ConfigurationManager.AppSettings["OrdersList"].ToString();
                            string fileName = Orderslist;
                            string fileText = fileName + "_" +DateTime.Now.ToString();
                            fileText = fileText.Replace(".txt", "") + ".txt";
                            fileText = fileText.Trim();
                                    //Check if file already exists. If yes, delete it. 
                                    if (File.Exists(fileText))
                                        File.Delete(fileText);
                                    // Create a
    new file 
                                    using (StreamWriter streamWriter = new StreamWriter(fileText))
                                        streamWriter.WriteLine("order1");
                                      streamWriter.WriteLine("order2");
    Thanks in Advance:

    Hi,
    Thanks for responding....
    In App pool,Where i need to check permission. i.e. Current logged user permissions or some other permissions.
    Actually text files are storing under D drive...But some times only getting error...
    Could not find a part of the path 'D:\SavingTextfile\sampletext_44.txt
    when i close the browser and reset IIS,again open browser and submit details,it is saving in the give path
    D:\SavingTextfile
    Help me...
    Thanks.

  • SSIS File System Task Move File Could not find part of the path error

    Hi All,
    I am getting error in production when try to move files from one folder to another folder. But on Dev environment working fine. 
    An error occurred with the following error message: "Could not find a part of the path 'C:\Archive\ABC.txt'
    My package configuration details.
    1) For Each loop Container 
               Prop’s:
    Enumerator: For Each File Enumerator
    Folder: C:\
    Files: *.txt
    Retrieve File name --> Fully qualified 
    In Tab Variable mapping: User::name --0
    2) File System task
    Props:
    Destination Connection: c:\archive\
    Overwrite destination: True
    Operation: Move file
    Is Source Path Variable: True
    Source Variable: User::name
    Please share your suggestions on this.
    Regards,
    Vaishu

    Hi Vaishu ,
    Try below links :
    http://www.allaboutmssql.com/2012/09/sql-server-integration-services-rename.html
    http://social.technet.microsoft.com/wiki/contents/articles/18776.ssis-move-a-folder-from-one-drive-to-another-drive-using-the-file-system-task.aspx
    sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

  • Could not find a part of the path 'C:\Program Files\Update Services\Schema\

    clean SC 2012 R2 RTM.
    1. had problems with WSUS installation/post configuration
    2. found a blog with an identical problem where the problem was solved with the call to Microsoft. Tools directory was missing.
    I followed the suggestion: reinstalled WSUS using ps and wsusutil.
    I canceled WSUS configuration at recommended step. Everything looked fine.
    But after SUP creation I found SMS_WSUS_CONFIGURATION_MANAGER warning.
    I checked WCM.log and found Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.
    When checked there was no Schema folder in the path above. So it's just missing as folder TOOLS before troubleshooting.
    Any suggestions for fixing this.
    Thanks.
    Here is partial WCM that could help to find the issue, I clearly see that there is no Schema directory in C:\Program Files\Update Services:
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:14 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:20 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:20 PM 4536 (0x11B8)
    Successfully inserted WSUS Enterprise Update Source object {91F81925-CC1D-40C0-98C3-902AD3717594} SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:21 PM 4536 (0x11B8)
    Configuration successful. Will wait for 1 minute for any subscription or proxy changes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:21 PM 4536 (0x11B8)
    Setting new configuration state to 2 (WSUS_CONFIG_SUCCESS) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
    errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
    Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~  
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~  
    at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
    packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
    sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    ERROR: Failed to publish sms client to WSUS, error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=confman.contoso.lan SITE=MON PID=1716 TID=4536 GMTDATE=Sat Dec 07 22:10:22.831 2013 ISTR0="8427071A-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.7958.1000"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Failed to publish client with error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    completed checking for client deployment SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Shutting down... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:51:31 PM 4536 (0x11B8)
    Shutting Down... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:51:31 PM 4536 (0x11B8)
    SMS_EXECUTIVE started SMS_WSUS_CONFIGURATION_MANAGER as thread ID 4168 (0x1048). SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:38 PM 2008 (0x07D8)
    This confman.contoso.lan system is the SMS Site Server. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Setting new configuration state to 1 (WSUS_CONFIG_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Changes in active SUP list detected. New active SUP List is: SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
        SUP0: confman.contoso.lan, group = CONFMAN, nlb = SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Updating active SUP groups... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Waiting for changes for 1 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Wait timed out after 0 minutes while waiting for at least one trigger event. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:43 PM 4168 (0x1048)
    Timed Out... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Did not find supported version of assembly Microsoft.UpdateServices.Administration. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Found supported assembly Microsoft.UpdateServices.Administration version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Found supported assembly Microsoft.UpdateServices.BaseApi version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Supported WSUS version found SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:55 PM 4168 (0x1048)
    Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:55 PM 4168 (0x1048)
    No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Setting new configuration state to 4 (WSUS_CONFIG_SUBSCRIPTION_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:27 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
    Configuration successful. Will wait for 1 minute for any subscription or proxy changes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
    Setting new configuration state to 2 (WSUS_CONFIG_SUCCESS) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:34 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:34 PM 4168 (0x1048)
    PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
    errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
    Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~  
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~  
    at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
    packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
    sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    ERROR: Failed to publish sms client to WSUS, error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=confman.contoso.lan SITE=MON PID=1668 TID=4168 GMTDATE=Sat Dec 07 22:55:35.051 2013 ISTR0="8427071A-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.7958.1000"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    Failed to publish client with error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    completed checking for client deployment SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    Trigger event array index 0 ended. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    SCF change notification triggered. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
    Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
    "When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

    >Any Errors in SUPSetup.log and WSUSCtrl.log log files?
    No errors in these files. As I mentioned there is no Schema folder in  Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~ 
    Here are 3 repetitive errors in WCM.log:
    1. PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
    errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
    Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~  
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~  
    at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
    packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
    sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile)
    2. Failed to publish client with error = 0x80070003
    3. HandleSMSClientPublication failed.
    "When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

  • Azure project remove instead of unload now cannot find a part of the path build error

    I have an azure project built in vs2010 with a web role and worker role project. I accidently removed the worker role project then re added through 'add existing project'. Now when I try and build I get
    Error 1   Could not find a part of the path 'C:\Users\Mat\Documents\Visual Studio 2010\Projects\MvcApplication7 - Copy (4)\CubeCloud1.Azure\WorkerRole1\'.    C:\Program Files\MSBuild\Microsoft\VisualStudio\v10.0\Windows Azure
    Tools\1.8\Microsoft.WindowsAzure.targets    987 5   CubeCloud1.Azure
    Line 987 is the start of the  element.
    Looking at the path, the folder WorkerRole1 doesn't exist but looking at back ups of this project it doesn't exist in them either.
    I've tried adding the WorkerRole1 folder but then I get  Error 102 CloudServices38 : The entrypoint dll is not defined for worker role WorkerRole1.    C:\Program Files\MSBuild\Microsoft\VisualStudio\v10.0\Windows Azure Tools\1.8\Microsoft.WindowsAzure.targets   
    987 5   CubeCloud1.Azure
    I'm not sure going down the path of adding this folder anyway is the correct solution (I could be wrong of course).
    thanks,

    Hi mattech13,
    Thank you for posting in MSDN forum.
    According to your description, it seems that you have solved this issue now.
    Since
    this forum is to discuss: Visual
    Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
    Based
    on your issue,
    it is related to the Azure, so we will move this case to the Azure forum:https://social.msdn.microsoft.com/forums/azure/en-US/home?category=windowsazureplatform
    In addition, if
    you have any issues about this azure,I
    suggest you can post this issue directly to the Azure forum, you will get better support.
    Thanks for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Moving files to another directory got an error message [File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".

    Hi all,
    I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
    I am having a variable named filename and archivefilename and two fileconnections  one is originalfiles and archivefiles
    archivefilename=replace( @[User::filename],"datafiles","archive")
    orginalfiles connection is an expression =@user:filename
    archivefies connection is an expression=@user:archivefilename
    the filename comes from reading the folder that contains those files
    public void Main()
                string[] filenames;
                filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
                Array.Sort(filenames);
                Dts.Variables["filelist"].Value = filenames;
                Dts.TaskResult = (int)ScriptResults.Success;
    The folder c:\luminis\archive\ exists
    why I am getting this error
    My filesystem task : destinationpathvariable =false
    destinationconnection:archivefile
    overwrite=true
    operation=movefile
    issourcepathvariable=false
    sourceconnection=original file
    why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
    sohairzaki

    there may be 2 problem...
    1> specify a target directory only, not with the file name. 
    OR
    2> Try using the unc,path format \\computername\sharename\
    let us know your observation...
    Let us TRY this | Mail me
    My Blog :: http://quest4gen.blogspot.com/

  • Powerpivot add-in installation issue "Could not find a part of the path"

    Hello, 
    I got a Windows Server 2008R2 terminal server with Office 2010 and Powerpivot installed. I have an issue for some users, not every user get this error. When trying to add the Powerpivot add-in in Excel the following error message is displayed: 
    Name: 
    From: file:///C:/Program Files (x86)/Microsoft Analysis Services/AS Excel Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto
    ************** Exception Text **************
    System.Deployment.Application.DeploymentDownloadException: Downloading file:///C:/Program Files (x86)/Microsoft Analysis Services/AS Excel Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto did not succeed. ---> System.Net.WebException:
    Could not find a part of the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'. ---> System.Net.WebException: Could not find a part of the path 'C:\Program Files (x86)\Microsoft
    Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'. ---> System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
       at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
       --- End of inner exception stack trace ---
       at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
       at System.Net.FileWebRequest.GetResponseCallback(Object state)
       --- End of inner exception stack trace ---
       at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.FileWebRequest.GetResponse()
       at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
       --- End of inner exception stack trace ---
       at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.GetManifests(TimeSpan timeout)
       at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()
    I have checked the path and I found nothing. I could understand the problem if all users got this error but it's online a handfew of users. Other users can add the add-in in Excel without any issue. All the users are in the same domain and they use the one
    and only terminal server on the site.
    Any advice? I've searched the web but haven't found anything.
    Thanks in advance!

    Guys, I think I solved the
    issue:
    Symptoms
    1. Power Pivot SQL 2012 32-bit installed over the old version without
    deinstalling it
    2. Installed with a user with administrator rights
    3. It worked under the profile with admin rights, it didn't work under the
    normal users w/o admin rights and threw this error message: Downloading file.///c:/Program files (x86)/Microsoft analysis services/AS Excel Client/10/Microsoft.AnalysisServices.XLHost.Addin.VSTO
    did not succeed.
    4. In the admin profile, it went to the path "110":  C:/Program
    Files (x86)/Microsoft Analysis Services/AS Excel
    Client/110/Microsoft.AnalysisServices.Modeler.FieldList.vsto
    5. In the normal profile, it went to the - wrong - "10" path:
    C:/Program Files (x86)/Microsoft Analysis Services/AS Excel
    Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto
    SOLUTION
    1. ADMIN: Installed VSTO 4.0
    2. ADMIN: Checked if the .NET Programmability Support was installed - it was -
    if not, install it!
    3. NORMAL USER: Create a .reg file (Backup your registry before!) and
    use it UNDER THE NORMAL USER!!!
    Windows Registry Editor Version 5.00
    [HKEY_CURRENT_USER\Software\Microsoft\Office\Excel][HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins][HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins\Microsoft.AnalysisServices.Modeler.FieldList]
    "Description"="Microsoft SQL Server PowerPivot for Microsoft Excel"
    "FriendlyName"="PowerPivot for Excel"
    "LoadBehavior"=dword:00000003
    "Manifest"="C:\\Program Files\\Microsoft Analysis Services\\AS
    Excel Client\\110\\Microsoft.AnalysisServices.XLHost.Addin.vsto|vstolocal"
    "CartridgePath"="C:\\Program Files\\Microsoft Analysis
    Services\\AS OLEDB\\110\\Cartridges\\"
    4. NORMAL USER: Rename the registry key
    "HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\User Settings\Microsoft.AnalysisServices.Modeler.FieldList"
    into
    "HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\User
    Settings\Microsoft.AnalysisServices.Modeler.FieldList_old"
    5. NORMAL USER: Start up Power Pivot and it should
    work now!
    Analysis
    IMHO the issue lies in the fact, that the Power Pivot
    installer creates two problems:
    The first issue is that the path to the add-in under
    the NORMAL user is simply wrong and points to a wrong location (the
    "10" in the path). In the admin profile, where it was originally
    installed, it points to the "110" path which is correct.
    The second issue is that the installation procedure
    somehow needs to create a registry key (the one under point 4 in the solution)
    to complete it self and if this key already exists it fails to install and
    throws up weird error messages. If you delete or rename this key, it is created
    again (exactly in the same way) but then everything works out.
    Hope this
    helps!
    Regards, Reto

  • GP Preference Items Throwing "Could not find a part of the path" Error in GP Management Console

    Hello, 
    For background, I recovered two Server 2008 R2 Domain Controllers in the same domain from a JRNL_WRAP_ERROR
    using the BurFlags registry key as outlined in KB290762. The non-authoritative restore seemed to resolve NtFrs/replication challenges, as now the FRS and System logs are free from any major errors and "repadmin /showreps" output looks clean.
    As part of the cleanup process I am going through and checking all the policy objects. Policy objects that leverage group policy preferences are
    throwing an error when the settings are viewed in the management console:
    The following errors were encountered: 
    An unknown error occurred while data was gathered for this extension. Details: Could not find a part of the path 'C:\Users\administrator.YOURDOMAIN\AppData\Local\Temp\2\ny0ho1ht.tmp'. 
    This occurs for existing Group Policy Preference objects and those that are newly created. It is important note if I go to edit the policy in question
    the preference settings are available, it is viewing them in the management console that seems to be the issue. What concerns me here is that the file it is looking for is stored in the local temp directory and not the SYSVOL directory. With replication issues
    behind me I am not sure how to address this last piece of the puzzle.
    Any assistance in getting this squared away you be appreciated.
    Thanks!
    Jordan

    DCDIAG /C outputs the following error in relation to the VerifyEnterpriseRefrences test:
    Starting test: VerifyEnterpriseReferences
       The following problems were found while verifying various important DN
       references.  Note, that  these problems can be reported because of
       latency in replication.  So follow up to resolve the following
       problems, only if the same problem is reported on all DCs for a given
       domain or if  the problem persists after replication has had
       reasonable time to replicate changes.
          [1] Problem: Missing Expected Value
           Base Object:
          CN=DC04,OU=Domain Controllers,DC=YOURDOMAIN,DC=local
           Base Object Description: "DC Account Object"
           Value Object Attribute Name: msDFSR-ComputerReferenceBL
           Value Object Description: "SYSVOL FRS Member Object"
           Recommended Action: See Knowledge Base Article: Q312862
          [2] Problem: Missing Expected Value
           Base Object:
          CN=DC03,OU=Domain Controllers,DC=YOURDOMAIN,DC=local
           Base Object Description: "DC Account Object"
           Value Object Attribute Name: msDFSR-ComputerReferenceBL
           Value Object Description: "SYSVOL FRS Member Object"
           Recommended Action: See Knowledge Base Article: Q312862
          LDAP Error 0x20 (32) - No Such Object.
    I am evaluating the suggested KB now but am not sure it is related to the issue at hand but posted it for completeness. 
    All other tests pass. 

  • Illustrator 6.0 vector paths, when opened in Illustrator CC are now all broken into segments?

    Illustrator 6.0 vector paths, when opened in Illustrator CC are now all broken into segments at key points (ie. a circle, has become a series of 4 quarter circle lines. Has anyone experienced this and is there a quick fix? I still have both Illustrator versions installed and can go back to use the original files, however I'd like to upgrade smoothly without having to redo all my vectors!    

    That is strange sounds like what happens when you open a die built in autocad, in illustrator. What happens if you paste a CS6 path into CC?

  • See file path when opening a file is CS

    I have wondered this for some time. When I open/place a file into CS, it will by default open to the most recent files and folders accessed. Sometimes I have more than one folder by the same name (one on server, one on my desktop for example). I often would like to double check the path where these files are located. But the path does not show up when opening a file from the application. Show path bar is only visible when you access the files straight from the finder. Is there any way to see the path from "open or place"? I often have to re-establish the path to ensure I have the right one.

    Update your video card driver from the GPU maker's website.

  • Re:one or more project in the solution was not loaded correctly, Could not find a part of the path

    Please I have been having  problems loadig the adventuremultdime2012, I downloaded the visual studio 2013
    but it is showing me this path
    C:\Users\PC\AppData\Local\Temp\Temp5_AdventureWorks Multidimensional Models SQL Server 2012 (3).zip\AdventureWorks Multidimensional Models SQL Server 2012\Enterprise\AdventureWorksDW2012Multidimensional-EE\AdventureWorksDW2012Multidimensional-EE.dwproj :
    error  : Could not find a part of the path 'C:\Users\PC\AppData\Local\Temp\Temp5_AdventureWorks Multidimensional Models SQL Server 2012 (3).zip\AdventureWorks Multidimensional Models SQL Server 2012\Enterprise\AdventureWorksDW2012Multidimensional-EE\AdventureWorksDW2012Multidimensional-EE.dwproj'.
    I guess its a hidden file or I have deleted it, because I cant find it too, any help please

    Looks like you've either moved the file to somewhere else or it got deleted
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

Maybe you are looking for