Loosing Plug in configuration after restart

I am loosing always my plug in configurations after a restart of my PC.
How can I solve this?
Jürgen

Are you saying that each time you restart Elements the files are shown missing again? This is strange, you can try Catalog Recover by selecting File->Catalog->Recover option and see if that helps.
-Smriti

Similar Messages

Transmission does not keep its configuration after restart

Hi everyone,
I have a problem coming up with gnome's last upgrade.
Since Gnome 3.8 then, transmission 2.77 will not keep its configuration. I've already tried to erase the ~/.config/transmission folder in order to start transmission with a "clean" configuration but its not working.
Does anyone have the same problem ? And more importantly, does anyone have a solution yet ?
Thanks

chord wrote:
Common solution for configs rewriting prevent :
chattr +i <your-config-file-name>
It blocks any changes on locked file.
If you need to rewrite/edit file, just unlock it with chattr -i, write changes and lock it again.
I don't think that's a good idea, there is probably a valid reason a config file is being overwritten, your solution would disable the actual application from changing its own config file...
I had a similar problem with the transmission daemon,
Basically this is what I have deducted:
Start transmission
It reads config file
Stop transmission
It re-writes the config file with what it first read when it started plus applying changes you may have made via a GUI.
Basically as I said earlier, if you edit transmissions config file while it is running with vim or nano or whatever, those changes will be over written when transmission stops.
The solution is to either change settings from the GUI, or make sure there is no transmission running, then edit the config file and save it. Everything should then work so long as you haven't made a syntax error when editing the config file.
Last edited by jrussell (2013-06-03 22:15:35)

After 7.0.2 long delay for menù showing up after restart

Good morning , after upgrading to 7.0.2 my ATV 3 restart with only family sharing and configuration menù....i think it was a fault on the fw upgrade so i reset to default configuration.
after restart everythings goes well and i restart configuring ATV but if i restart from the menù my ATV next boot again comes only family sharing and configuration...i think it was a fault in the 7.0.2 because if you also try to search for fw upgrade again i have error saying it was not possible to connect to the server...so i start thinking that after boot wireless interface is not ready...i left on ATV for about 5 minutes and magically all the menù appear...
before 7.0.2 there is no such problem...anyone experience the same ?
please let me know because i don't want to reconfigure the whole ATV to discover i need to hardware initialize again to try to solve the problem...

Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Cisco 2611 loosing configuration after router restart

Hello,
I have a router at a customer that looses its configuration after a restart.
I of course made a write mem, and it looks like this has been before.
Is there anything to check (hard/soft) befoire changing the router?
thanks in advance
Pierre Barrat

Check to see the configuration register value. You can do that by issuing the command 'show version'. At the bottom of the output of the command you will see the config-register value. Under normal circumstances this value should be 0x2102. If you see something like 0x2142 it means that the router is going to ignore the start-up configuration.
If the config-register value is indeed incorrect then you need to change it to 0x2102 by:
Router# copy start run
Router# config t
Router(config)# config-register 0x2102
Router(config)# exit
Router# wr mem
Router# reload
After the reload it should come up with the right config; that is if the problem was indeed with the configuration register.

Have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!

have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?

If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8.

I SCREWD UP AND SHUT DOWN MY MAC WHEN IT WAS IN THE PRIVLEDGES STAGE BECAUSE MY PLUG-INS FOR AFTER EFFECTS WASNT WORKING, WHEN I SHUT IT DOWN AND TRIED TO START IT BACK UP, MY MAC KEPT RESTARTING, TEST-RAN-ERROR..4MOT/1/40000003:HDD-14444? WAT IS THIS?

I SCREWD UP AND SHUT DOWN MY MAC WHEN IT WAS IN THE PRIVLEDGES STAGE BECAUSE MY PLUG-INS FOR AFTER EFFECTS WASNT WORKING, WHEN I SHUT IT DOWN AND TRIED TO START IT BACK UP, MY MAC KEPT RESTARTING, TEST-RAN-ERROR..4MOT/1/40000003:HDD-14444? WAT IS THIS? WAT DO I DO TO GET MY MAC BACK RUNNING

I believe you've posted this multiple times. Once is all that's needed. Also, please don't use all caps. Aside from the fact it means you're shouting it's also harder to read than mixed case.
The error means a bad fan motor or the HDD has failed. In your case it's the latter. You can try the following:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

After restart or power off and on. total recent apps and data(call,sms history) loosing.

i am using BlackBerry Z10 with 10.3.1. OS. 2-3 times i was tried. when ever i restart my Mobile, i am loosing recent apps and data like call and sms history.
eg. today is 25th Apr 2015. today i was restarted my mobile. after restart data and apps are available which ever i was installed before 3rd Apr 2015.
after 3rd Apr 2015, no call or sms history and apps are not there in my mobile.
this same thing was happened from last 2-3times.
so please do needful for me.

To help me better understand I was wondering if each of you can complete the following?
Go to KB36747 and download BlackBerryFix.zip
Run the tool and confirm that it says ‘The fix is not applicable to this device’
Assuming the tool states the fix was not applied, please complete the following test:
Make and receive 2 or 3 phone calls
Press the Power/Lock key followed by tapping Restart
When the device restarts do you see a blue LED?
After the device restarts, check the Hub and Phone app to identify if the calls made and received during step 1 still appear. Should this calls be missing, please capture logs using the steps below.
Open the Help app
Swipe down from the top of the screen, tap Create Report
Tap Save Log Snapshot
If prompted to upload logs, tap No
After completing these steps, using File Manager on your device go to Documents folder by Logs.
Tap and hold the log file (i.e. bbswltLog-<date>.zip) followed by tapping Share and send it via email to supportforums{at}blackberry.com.
If I can ask, what other type of data disappears? If you create a document using Docs to Go and save it to your device memory, does restarting your device result in document being removed from your device?
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

I have downloaded AI Trial but am getting a Configuration Error as follows 'A problem has occured with the licensing of this product. Restart your computer and re-launch the product. If this problem still occurs after restarting, contact Customer Support

I have downloaded AI Trial but on launching I am getting a Configuration Error which reads '
A problem has occured with the licensing of this product. Restart your computer and re-launch the product.
If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
Error: 213:5.
I have tried the restart suggestion, but the problem persists.
Can anyone assist.
TIm

Tim,
This may be one for this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or for a chat,
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
or for Adobe phone Support,
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

If autologin is configured desktop background picture is always galaxy picture after restart.

If auto login is configured, the desktop background picture is always the standard picture galaxy after restart. If i do an normal login the background is the right one. The which i have configured.

I seem to have a slightly different variant of this problem. My desktop picture is supposed to select a random photo from a large folder, and change every hour. When I start up my MacBook Pro by itself, it works fine--I get a random picture. When I connect my external Samsung display and have mirroring turned on, it also works--I get one random picture on both screens.
The problem shows up only when mirroring is turned off. I should presumably get two different random pictures. But instead I get the same two pictures every time--two different pictures, but always the same ones. After the first hour, I do get two random pictures--but at startup, I always see the same two. Removing the .plist file didn't help. I tried removing the original two recurring photos, and everything seemed fine for a couple of startups, but then it just got stuck on a different pair. A pretty inconsequential problem, all in all, but frustrating.

IChat windows loose data after restart

Hello,
If one keeps a series of ichats open and shuts down ichat and restarts the computer, after restarting ichat the windows are still open but know have a question bubble with the name of the person previously ichated with.
using 10.6
under a previous version (10.5?), after a restart the windows reopened but with the ichats still showing. How do we get back this behavior?

Hi,
In iChat 4 you had "Remember Open Chats across Launch" which displayed the last chats you had.
In IChat 5 you have a different setting linked to Save Transcripts.
Save Transcripts has to be On.
You can then set to Display a certain number of Chats.
This does not replicate the Remember Open Chats.
Last Chat when a Buddy is also clicked in the Buddy List will display the last chat you had with them.
The Last 25 Chats option (as with other of the numbers) will display the last chosen number of IMs from that chat (Or the last chat of another selected Buddy)
(Returning to Last Chat then only displays the Last IM).
Now as iChat 5 is a new version the .plist is rewritten the first time.
This has a direct effect on the Last Chat options.
The .plist is now missing some info about the Last Chats although it can search and display the Last Chat with a Buddy if a Buddy is clicked.
It seems to get better as time goes on about displaying Open chats on Quit like the previous version if left at Show Last Chat rather than one of the numbered choices.
Another way to explain it.
In the File Menu of iChat you have Recent Items.
This lists the last Text Chats and Video or Audio chats you had and Saved Chats
(The Number of items displayed here is set in System Preferences > Appearance > Number of Documents)
It seems that there is a correlation between th Recent Items and the Saved Chats and the Last Chat has to be in both to replicate the "Remember Open Chats across Launch"
It is not a perfect match for the previous setting.
It does seem to improve.
Having said that I played and tweaked mine running though all the option I could think off and then left it for a while.
Now mine seems to remember the Last Open Chat properly. (I may have beaten it in to submission)
10:15 PM Friday; May 21, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

[TP x120e] Continuous "Configuration changed - Restart the system." error

I played with my bios (disabled/enabled mic, webcam, LAN and so), but after exiting the bios, Thinkpad x120e reboots continuously with the error message "Configuration changed - Restart the system.". I was not able to boot from any USB/HDD and also I can not enter to the BIOS. Hard bios reset won't help. Any ideas?
Thanks!

Hello,
Have you tried unplugging all power, including the internal CMOS/RTC backup battery, from the ThinkPad X120e, leading the unit alone for a few minutes to let any capacitors holding a residual electic charge drain, holding down the power button for 30 seconds to complete the operation, then plugging in the AC charger without either of the batteries installed, then holding down the F1 key while pressing the power button to see if that gets you into the BIOS settings?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Linked Server unable to Connect in SQL Server 2012 after Restarting SQL Server Service it works fine. Why?

I have created a Linked Server to Access Database of 64 MB in Size located in Remote System to SQL Server 2012.In Start for Some time it works fine and after it is giving the Error
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.".
Msg 7303, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
Previously I thought it as Permission Issue. By trying some fixes proposed in forums it not fixed. But, after restarting the SQL Server Services without changes to the linked Server it works perfectly. How could i fix it. I don't want restart the SQL Server
Service it leads to Some other process failures.
RehaanKhan. M

After all the Errors, When I am restarting the SQL Server its working correctly.
Whats the problem it is clearing itself after restarting of SQL Server. Why ?. I can't find anything regarding this in SQL Server .
The following are the Errors i got connecting to SQl Server.
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.".
Msg 7303, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
Error-2:
Executed as user: RMS\Administrator. Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST". [SQLSTATE 42000] (Error 7303) OLE DB provider
"Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.". [SQLSTATE 01000] (Error 7412). The step failed.
After unchecking the Allow In Process in OLEDB.ACE Provider Properties.
Msg 7399, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
The OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" reported an error. Access denied.
Msg 7301, Level 16, State 2, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot obtain the required interface ("IID_IDBCreateCommand") from OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
for to fix above error i have followed the instructions in the following link,
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/08/19/permissions-needed-to-set-up-linked-server-with-out-of-process-provider.aspx
This also failed to work. I Restarted SQL Server and make the Linked Server Properties Default to my Configuration and it works fine.
Can you suggest me a solution for this issue. Every time i don't want to restart SQL Server Services as it effects other jobs and Processes.
Thank you.
RehaanKhan. M

Networked computer will not join network automatically after restart/sleep

Situation:
I've got two computers - PowerBook 17" 1,25 GHz, iMac 2,16 GHz 24", both running OS X 10.4.8. They are networked via AirPort Express, firmware v. 6.3, in a WPA protected network. The AirPort distributes ADSL 4 Mbps connection.
Computers are set as DHCP with manual address (to keep stable LAN address)
The problem: While the PowerBook always joins the network after restart/sleep automatically, iMac in such a situation never goes online - the airport status in menu bar is on, the network is checked, but it cannot connect or be reached.
I always have to manually turn airport of from menu bar, then turn it on, then wait about 20 seconds and then manually choose name of my network.
After this procedure iMac is finally online.
Settings of the AirPort are:
AirPort tab
Wireless Security: WPA2 personal
Channel: Automatic
Mode: 802/11 g/b
Internet tab
Connecting using: Ethernet
Configure: Using DHCP
WAN ethernet port: Automatic
Network tab
Distribute IP address unchecked (no difference when checked - tested)
Any idea how to fix it?
Thanks in advance!
PowerBook 1,25 17", iMac 24" Mac OS X (10.4.8)

Thanks a bunch, Duane!
You pointed me to the exact answer.
iMac joins the network automatically now, although I had to change original automatic login of an admin user to manual login page, because after automatic login as one of three users, an error message "Network error" appeared quicker than the actual joining the network, that came a few seconds later.
After manual logging (it probably needed a little more time) it's OK.
Thanks again and greeting from Czech Republic!
PowerBook 1,25 17", iMac 24" Mac OS X (10.4.8)

HT201263 after restarting and restoring ipod touch, display is still white screen

after restarting and restoring ipod touch, display is still white screen. I have done this several times. One time, the display went to the home screen, but immediately went back to the white screen when I plugged it into the charge cord. The music continued to play however. help!

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Lose airport settings after restart

After restarting powerbook, airport settings are changed and can no longer use bonjour printer or see airport express. As instructed by Apple, if I throw out system configuration folder and restart computer, it works fine again until it is shut down, then same problem. There must be a better answer!

I'd love an answer to this, I've had this problem for a while now

Loosing Plug in configuration after restart

Similar Messages

Maybe you are looking for