Loosing Right Click When Install CS4 64bit on Windows Vista 64

Weird Photoshop CS4 installation problem:
1) Windows Vista 64 bit new installation SP 2
2) firewall is off
3) I have installed & reinstalled the program several times
4) When installed I am loosing the Windows Right Click and I get this error message:
"The specified module could not be found: c:\program files\adobe\adobe version cue\client\4.0.1\versioncue.dll
All the version cue files are installed but I still loose the right click and get that error message. I also get the same message when I click the folder options when I try and set security permissions
Please advise

Have you used the CS4 Clean Utility before your re-install? What happens is that Adobe Drive is messing up things, so I recommend to re-install without it. This little tip may also help:
http://www.aeonity.com/david/how-remove-adobe-drive-cs4-from-context-menu
Mylenium

Similar Messages

Installing CS4 64bit in Windows 7 to a custom drive letter

Hi all,
Currently a CS3 user on XP SP3 but wanting to retire my old computer and build a new i7 machine running on Windows 7 64bit and will upgrade to CS4 so I can run 64bit mode and take advantage of GPU features plus more than 4gigs of memory!
Downloaded the CS4 trial to take a look at the program and specifically the detailed install instructions and was shocked to read that CS4 64bit can only be installed on the default (C:\) drive??? Is this really so?
I had planned to use one of the new superfast Solid State drives of around 80Gb capacity to run Win 7 only, no programs on C:\ just Win 7. I currently use this method in my XP machine with a C:\ drive just for the O/S and a P:\ drive for programs and of course a dedicated scratch disk.
Why is CS4 64bit the only program I can see (from my list of stuff I'll need) to insist on being installed with the O/S? Is there any way round this? I need to get this sorted in my own mind beofre ordering the various HDDs to make the new machine as I may have to revert to a 500Gb C:\ drive if this is the case.
Thanks for any help you can give this 64bit virgin lol
Dave

Thanks for the replies guys,
Mylenium, I'm going to play Mr Dense here for a post You are saying this was no different for CS3 etc? I'm on CS3 (32bit) and it's installed on my P:\ drive but I recognise there are parts of CS3 also on C:\. You're saying this is no different for CS4 64bit?
i.e. I could install the main program on P:\ and have the shared stuff on C:\ - i.e. situation normal? I don't have to have it all on C:\ ?
Zeno, call me a wuss but I learnt early on with Windows to keep stuff apart! My last two PCs had multiple drives and I like to keep the O/S on it's own drive in case I need to reinstall/repair etc. I left One dirve does it all behind a few years back and a multi drive approach has served me well.
Hudechrome, thanks for that link - heavy going! I'll have a good read. I don't want to jump into something with issues, I'm just trying (aren't we all!) to put together the components that will make PS run as fast and efficient as it can.
Thanks all
Dave

Hai i am using firefox 3.6.When right clicking on a link and a window opens up, i want it to ask me "Open Link in New tab" first, not second.

hai i am using firefox 3.6.When right clicking on a link and a window opens up, i want it to ask me "Open Link in New tab" first, not second.

First, you are using a version of Firefox that is very old and outdated. Please update to at least Firefox 3.6.27, or more preferably, update to Firefox 10.0.2. There are lots of bug fixes, security improvements, and much improved performance in Firefox 10.
After you do that, try seeing if you are still having a problem. If you are, is this that when you try to select "Open in a new tab" it opens in a new window instead? Or something else?

Can the magic mouse be set to emulate a right click when tapped?

I recently purchased an Apple Magic Mouse.
I also have a MBP with a track pad which I have configured to do a right click when I tap it.
The small problem I have is that the AMM needs to be pressed similar to the way the track pad used to before I configured the tap-to-click.
Can this be done for the magic mouse.
Thanks for any assistance.
Barry

Hello there, bholtzkener.
To set up secondary click on the mouse the following article should provide very helpful:
OS X Mountain Lion: Use an Apple Magic Mouse
http://support.apple.com/kb/PH11298
The screen where you make the choice looks like this:
Keep in mind, the mouse should be used with the Apple logo at the base of the hand and should provide the "click" sensation when you tap the other side with finger tips.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Stop Oracle Apllication - when installing Reports 6i on Windows XP

Hi everybody
I Have Windows XP
I Have database 9i
I have Forms 6i
I have a problem when installing Reports 6i on Windows Xp
Message appeared and said :-
Title :Stop Oracle Applications
Message :You Must stop all Oracle Services and Applications using Net8 for the Net8 installation to be successful
Press Ok to continue the installation once the services and applications have been stopped, or press Cancel to abort the installation.
--- End of message
I stoped all services and pressed Ok but the message never stop asking me until I pressed Cancel .
Can anyone help me to install the Reports 6i

Try this, it may help...
1. Shut down the DB, and make sure it won't automatically restart.
2. Right click on my computer, go to manage.
3. in manage, expand the services 'menu' (on right window).
4. Press on services. That should bring up a list of all the services, running or
not. Scroll down till you find the Oracle services, Highlight them and press stop.
(You can also check the services from HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services)
Run regedit (Start > Run > Enter "regedit", click "Ok"), find and check the following keys:
HKEY_LOCAL_MACHINE
\SOFTWARE
\ORACLE
HKEY_LOCAL_MACHINE
\SYSTEM
\CurrentControlSet
\Services
\EventLog
\Application
\Oracle.oracle
Also check in HKEY_CURRENT_USER\SOFTWARE\ORACLE
5. If that doesn't work, then try to find a different solution
Uninstall Oracle and then Re-install
Hassan

Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL..

Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL. However, if I right click on a link and select "Open Link In New Tab", the Tab shows URL in address bar. So it's working when it's a New Tab but not a New Window.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

I right-click in a Yahoo e-mail window and select Languages - Spanish (Mexico) and start typing in Spanish, but it is not correcting my mistakes, or offering alternative spellings.

I speak English. I am living in Chile and have a Dell/MS Windows Vista (English) laptop. I have Firefox 3.6.12. I have installed the Spanish (Mexico) dictionary. I right-click in a Yahoo e-mail window and select Languages - Spanish (Mexico) and start typing in Spanish, but it is not correcting my mistakes, or offering alternative spellings.
I don't know if I have the correct plug-in, correct settings, or am expecting something that isn't possible.

Do other dictionaries work if you select them in the Languages menu?
See:
* http://kb.mozillazine.org/Spell_checking
* http://kb.mozillazine.org/Dictionaries
* [[Using the spell checker]]

Edge Animate CC crashes on right-click on any Object in Elements window

Hi,
Every time I right click on an Object in Elements window Animate crashes on me.
Same thing happens, when i click on the "Open Actions" Button - "{ }"
I really would apreciate some kind of help with this problem, since I am able to accomplish nothing this way.
I am running on a 2010 MacBook Pro 3.06 GHz Core 2 Duo - OSX 10.9
Adobe Edge CC downloaded today via Creative Cloud
Thanks in advance,
have a beautiful day,
Anne

Hi hemanth,
Thanks for the reply,
I am Using Edge Animate 3.0.0.322.27519
(Actual Version downloded via Creative Cloud)
I renamed the Folder
/Users/Your User Name/Library/Application Support/Adobe/Edge Animate
TO
.../OLD Edge Animate
as suggested in the link you gave me...
I restarted An and not only is the problem still ocurring, but also the program did not create a new '.../Edge Animate' Folder.
The Link you gave me stated:
After you have removed your existing preferences, restart Edge Animate. The application creates new preferences files and folders using the default settings.
This did not happen.
but program is starting normally without the preferences Folder obviously - problems stay the same
It's nice to know, that you are there to care about the problem -
thanks for that so far and if you can think of anything else -
don't hesitate to write
have a beautiful day,
Anne**

Is it possible to instal CS4 at a windows 8.1 pc?

Is it possible to instal CS4 at a windows 8.1 pc?

Thanks so much Gene. I really appreciate your time and suggestions.
Btw, should have been clearer as one couldn't imagine I meant that 5.5 (i.e. ancient one). The adobe website also has this info: Windows 8.1 compatibility for Adobe Photoshop version 5 which just says version 5.5 under compatibility. So it does seem possible indeed to run this but perhaps for someone more techie. Had a look at the thread re: 6.0 and tried to run it as admin. Tried copying the contents on the desktop and change the compatibility under properties (even ran compatibility trouble shooter under properties) - but in vain. Must be doing something wrong. Prolly easier to return the CD (:/)
If anyone could drop an idea in relation to how/where to buy a genuine and legal copy of a CS5/CS6 I woudl greatly appreciate. I bought the 5.5 off eBay and probably will search for the right version this time on there again. But it's a bit of a question mark for me in regards to how do I make sure that I buy a genuine licenced version which I can register with the Adobe.

When installing itunes on my windows XP I get an error message "Service Apple Mobile Device"

When installing iTunes on my Windows XP I get an error message "Service Apple Mobile Device (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services". I don't know what this means and I do not know how to resolve it. Can you advise please?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
iTunes 11.1.4 for Windows- Tips for Unable to install or open

Access Denied Error Opens when Installing HP Monitor Software (Windows 7)

im getting the following error trying to upgrade my screen driver.
"Access Denied Error Opens when Installing HP Monitor Software (Windows 7)"
I found this error in the help area but it doesnt address the problem, it simply describes the device manager instalation procedure, which I am using , and which results in the error.

Hi debgibson,
What is the monitor model number and what is the PC model number?
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Error 1920 or 1921 when installing iTunes 5 for Windows

Hello,
Can anyone help me in finding the complete article on how to solve the following error message: Error 1920 or 1921 when installing iTunes 5 for Windows. It was posted September 9, 2005.
I need the complete instructions on how to correct the following error: The Windows Management Instrumentation service isn't running on your computer.
Thanks!

hi Roberto!
gosh, haven't seen one of those for a while ...
are you trying to reinstall a 5.0.0.35? the
b Bonjour
version of the 1920/1921 didn't hit 5.0.1.4 installs. can you find a copy of a 5.0.1.4 installer from somewhere?
love, b

When installing lion would my windows partition be removed?

Before I buy Lion I would like to know if when installing the new OS whether my partition with windows on it will be removed and/or whether this would create
any problems when installing?
Cheers

By the way, I posted the above comment a few minutes ago trying to inform you of this problem, but APPLE DELETED IT!!!
This is the email I received:
Dear Bryan (Bryan Crow), Apple removed your post titled "Re: When installing lion would my windows partition be removed?" because it contained the following: Off-topic or non-technical posts
Non-constructive rants or complaints
Our terms of use, which include helpful information about using Apple Support Communities, is located here: https://discussions.apple.com/static/apple/tutorial/tou.html. We encourage you to continue using the Apple Support Communities while abiding by our terms of use. We are including a copy of your post at the end of this email for your reference. If you would like to send feedback to Apple about a product, please use the appropriate selection here: http://www.apple.com/feedback As part of submitting feedback, please read the Unsolicited Idea Submission Policy linked to the feedback page. Best Regards,
Apple Support Communities Staff ++++++++++ This message is sent from a send-only email account. Any replies sent to this address are deleted automatically by the system. ------------------------------------------------------- A copy of your message for reference: Lion WILL corrupt your Windows Partition. You WILL Lose Everything. Happened to me and everyone else. Apple's Disk Partition Engineers are complete morons. Don't take my word for it? Just Search this Forum or Twitter: http://twitter.com/#!/search/lion%20windows%20partition

Forms 10g installed and running on Windows Vista

Update 12-Dec-2008: Oracle has published NOTE 559067.1 -- How to Install Developer Suite 10.1.2.0.2 - hence 10.1.2.3 - on Windows Vista, 24-OCT-2008 with some installation help.
Update 07-July-2008: Added text at the bottom showing how to find patchsets for Forms 10g.
Update 29-May-2008: This thread was started in November, 2007. In January, 2008, Oracle released Patch 3 for Forms 10g, which makes Forms 10g compatible with Windows Vista. As time permits I'll try to keep the information in this post up to date. Updated information will be inserted as blue text.

Original message begins here:
This is a second thread I am posting to outline the steps I have used to install Forms on a Windows Vista Home Basic laptop. The other thread describes installing Forms 6i:
Forms 6i installed and running on Windows Vista
Please read through the initial part of that post for the background. I realize Oracle has not certified Forms 10g to run on Vista, but the time has come for my associates and I to upgrade our old computers to new desktop/laptop platforms, and I would hate to acquire XP machines and be stuck with them for the next 5 years. (Note: Since first posting this message, Oracle has certified Forms 10g Patch 3 (version 10.1.2.3.0) to run on Vista) So after another person informed me that he had Forms installed and running on Vista, I went ahead and bought one. I found that as long as I set the compatibility mode to run Forms programs as Windows XP (and a few other changes), Forms 6i and 10g run quite satisfactorily.
Update 29-Jan-2008: Unfortunately, it turns out that the Forms 10g Builder running on Vista had a major flaw: If you try to develop a form, the Builder will crash if you try to compile a procedure that calls another procedure in the form that has errors. The problem is reported and described in this thread: Error compiling a form under Vista
Update 12-Mar-2008: Installing Patch 3 on Vista does not help with this problem -- the Builder still crashes in the same situation.
Update 25-July-2008: Applying Patch 7047034 has corrected the problem. See this link within this thread: Forms 10g: Installing Patch 7047034 on Windows Vista
Webutil note: I am stuck in a Forms 6i client/server world, so all my forms must run in that environment. Therefore I have not used any Webutil software, and I do not know whether that part will run under Vista.
Internet Explorer note: On Windows Vista, IE CANNOT be used to run the Web Forms runtime. It crashes immediately when you try to run a form. Instead, I can use either Firefox (Firefox 2, Firefox 3.0 Crashes with Forms 10g) or Netscape, as long as they are set to disable java. [ Correction: IE7 on Vista now runs the Forms 10g forms. You just need to add "?config=jpi" to the browser URL when starting the Web Forms session. More IE/Vista info: [url=http://forums.oracle.com/forums/thread.jspa?threadID=642973]Vista JInitiator Problem ]
The Oracle Developer Suite download page:
http://www.oracle.com/technology/software/products/ids/index.html
Oracle Developer Suite Installation Guide:
http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm
The steps below are those I followed to install Forms 10g (version 10.1.2.0.2)
I. Preliminary system changes in Windows
When I started installing, I got the following error message: Install has encountered an error while
 attempting to verify your virtual memory settings.
 Please verify that the sum of the initial sizes of
 the paging files is at least 256 MB.To fix this: Go to Control Panel, System and Maintenance, View amount of RAM and processor speed (under "System"),
Advanced system settings (in left "Tasks" column), Advanced tab, Settings (under "performance"), Advanced tab:
Virtual Memory shows a "Total paging file size for all drives: 2337MB.
Click "change", Uncheck "Automatically manage paging file size for all drives"
Click "custom size:", set Initial size to: 2048, Max to 4096
Click set button, then OK, get message:The changes you have made require you to restart your computer before
 they can take effect.Restart the computer.
II. Installing Forms 10g
1. Download two files from Oracle:
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
2a. Before extracting, it is a good idea to shut down any virus protection software. It can sometimes prevent some files from being created.
2b. Extract both into the C:\oracle directory, as disk1 and disk2.
3. Using Windows Explorer, change the properties of setup.exe in the C:\oracle\disk1 folder. (In windows explorer, right click, properties, Compatibility tab.) Change the compatibility to run as Windows XP (Service Pack 2).
4. Right click setup.exe and click "Run as administrator"
5. Select "Installation type" = Complete (1.11 GB)
6. Received this message:Windows Firewall has blocked this program from
accepting incoming network connections. If you
unblock this program, it will be unblocked on all
public networks that you connect to.
C:\users\steve\appdata\local\temp\orainstall...
2007-10-29_11-59-08am\jre\1.4.2\bin\javaw.exeI clicked "Unblock"
7. Received this message: "Provide outgoing mail server information" I entered the smtp mail server that I use.
8. A summary screen displayed showing 274 products under New Installations.
I clicked the Install button.
9. Received this message: You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2007.....log
10. The installation completed. Installed products shows Forms 10.1.2.0.2
III. After the install completed
1. Create a shortcut to the Forms 10 Builder on the Desktop.
On the shortcut line, after the .exe, add *userid=userxxx/pwxxx@orcl* so Builder automatically logs into 10g database. If you do step 4 below (creating an easily-accessible folder to use for your forms) change the "Start in" path on the shortcut so it points to that folder. Otherwise, Forms Builder will not find referenced objects and PLL libraries when it opens a form. Also do the same on the Start, All Programs shortcut for the Forms Builder.
Edit: After applying Patch 3, the following steps are not necessary.
Set its compatibility to Windows XP.
Set checkbox: "Run this program as as an administrator." (Without this, FormBuilder will NOT open a PLL library.)
Click the "Show settings for all users" and change values there.
2. Copy "Start OC4J Instance" icon to desktop.
Set its compatibility to Windows XP.
The first time it runs, I got a Windows popup to unblock program named Java. I clicked "Unblock".
3. tnsnames.ora:
Rename C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
to: tnsnames_orig.ora
If you created a tnsnames.ora file for Forms 6i, just copy it to the path above. If not, do this:
Create a new tnsnames.ora file, copying entries old file on my old laptop, which contains all the connections I use.
Delete the old laptop entry, replace with new entry for the new local ORCL connection on new laptop from tnsnames file renamed from the c:\oracle\... ...\10.2.0\db_1\ path.
4. Optional: Create an easily accessible folder to store fmb files:
C:\users\steve\.1\fmb10
You don't really want to keep drilling into C:\oracle\DevSuiteHome_1\forms, and then find your .fmb file among the several dozen oracle-supplied files.
To create a folder named .1, you have to open a CMD.exe (Windows DOS) window, and type the Make Directory command:
MD .1
That will create the folder within the current directory -- mine defaults to C:\users\steve
Note: If you also need to use Forms 6i like me, DO NOT EVER open a .fmb file in the Forms 10 Builder from the Forms 6i folder. If you compile it, or even worse, save the .fmb, Forms 6i *cannot ever* access the file. Instead, always use the File Manager (Windows Explorer) to copy the fmb from the fmb6 folder into the fmb10 location.
5. Change the Forms 10g Default.env file using a text editor.
This file replaces all the settings originally written to the Windows Registry (GREAT idea, Oracle! I hate the registry.) No more Regedit. The default.env file is located at: (DevSuiteHome_1 path)\forms\server\default.env
Locate line with: FORMS_PATH= and add:
;C:\users\steve\.1\fmb10
Add a new line:
FORMS_MMAP=FALSE
The above allows compiling an fmx while the form is running.
Add a new line:
FORMS_ROWLOCK_OPTIMIZATION=FALSE
(This fixes Oracle bug number 3949854, which prevents automatic skipping if the same value is typed over another value. TAR 4806199.993 Automatic Skip failure...) See bug 4068896
Add a new Line:
FORMS_RESTRICT_ENTER_QUERY=False
This allows use of Query-Where window in enter query, after entering a colon in any input field. Without this, Forms returns FRM-40367: Invalid criteria in field nnn in example record. Oracle shut it down to prevent "sql injection" attacks.
6. Jiniator setup:
Run file jinit.exe in C:\oracle\DevSuiteHime_1\jinit\jinit.exe
It installs Jinitiator 1.3.1.22.
I installed it in C:\oracle\JInitiator 1.3.1.22\
For Firefox, make sure a copy of file \bin\NPJinit13122.dll resides in C:\Program Files\Mozilla Firefox\plugins.
For Netscape, the path is: C:\Program Files\Netscape\Navigator 9\plugins
7. Browser settings
See the note above about using Firefox 2 and not Firefox 3!
In Firefox 2 go to: Tools-> Options-> Content
Uncheck the "Enable Java" checkbox
--Firefox terminates if this is not done!
Note: After my system automatically installed updates to either java or Firefox, re-check the "Enable Java" setting. I am suspicious that one of these installs re-enables java in the browser.
Also note: some web sites cannot display properly if java is disabled. Example: U.S. time website: http://www.time.gov Use Internet Explorer to view these.
In Netscape make the same changes as Firefox. Without disabling java, it also terminates when you try to run a form.
Creating a url to use in the browser:
Try this:
http://127.0.0.1:8889/forms/frmservlet
If it does not work, change the 8889 port number as follows:
Open file: C:\oracle\DevSuiteHome_1\install\portlist.ini
Note the number in line:
Oracle Developer Suite HTTP port = 8889
Use the number as the port number.
You can also change the 127.0.0.1 to the computer name:
Control Panel, System and Maintenance, See the name of this computer (under "System"). Mine is "steve-PC"
So the alternate URL is: http://steve-PC:8889/forms/frmservlet
To try out the URL, start the OC4J instance set up above. Then start either Netscape or Firefox, and enter the URL. You should get a welcome screen.
If the above URL works, start up the Forms Builder, and open Edit, Preferences. On the General tab, uncheck the "Build before running" check box (optional). On the Runtime tab, set the "Application Server URL to the url above.
To run a real form, add this to the URL after frmservlet, (with no spaces):
?form={formname}&userid={userxxx}/{passwordyyy}@{connect-string}
but replace the parts in curly braces with the appropriate values. Example:
http://127.0.0.1:8889/forms/frmservlet?form=ABC&userid=abc123/zyx@orcl
Setting up Forms Builder to directly run a form in the browser:
Run the Forms Builder. Go to Edit, Preferences, Runtime tab.
Set the Application Server URL to:
http://127.0.0.1:8889/forms/frmservlet
(or use whatever URL string you developed above)
Set the Web Browser Location to:
"C:\Program Files\Netscape\Navigator 9\navigator.exe"
(or an equivalent to run the Firefox browser).
8. FORMSWEB.CFG file changes
The file is located at:
C:\ORA_DS_101202\DevSuiteHome_1\forms\server\formsweb.cfg
I changed the following two lines in the file, but these are my personal preferences:
separateFrame=true
lookandfeel=Generic
9. FMRWEB.RES file changes
For Oracle help: Enabling Key Mappings
The file fmrweb.res defines actions (triggers that run) when a function key is pressed while running Forms. The one released has unix-style key mapping, but I prefer keys originally mapped for Windows PC Forms users. There is a fmrpcweb.res in the same folder that can be renamed to fmrweb.res.
In the C:\oracle\DevSuiteHome_1\forms path, I renamed fmrweb.res to fmrweb_orig.res.
I have a file that I prefer to use, so I put it into the folder as fmrweb.res. The contents are listed below. It is organized so the most important keys are listed alphabetically at the top (URFD column is the sort column), followed by a group of less-important keys. These are keys that are available to users, but they either would not use, or are disabled within most forms. The URFD column in the second set starts with a hex A0 character, which is a high-order space, so collates after normal alphabetic characters. (Note: If you want to copy the text below and use it, the hex A0 character has been changed by the forum software to a space. So you would need to use a text editor with hexadecimal character capabilities to replace the space with the original character. )
My file has special keys defined for F2 (I use it for a debugging Key-F2 trigger in my forms), and a "Cursor to Home" F12 function. All the rest are pretty much the same as in the released fmrpcweb.res file, only mine are organized alphabetically on the URFD column.
The Web Forms fmrweb.res file is editable using any programming editor (NOT MS Word!!!). The old Client/Server key mapping file, fmrusw.res, could only be changed using the Oracle Terminal program (and it is a pain to use).
Here is the main part of my fmrweb.res file:#
#Jfn :Jmn: URKS :Ffn : URFD
# : : (User-readable : : (User-readable
# : : Key-sequence ) : : function description)
118 : 1 : "Shift F7" : 74 : "Clear Form"
121 : 0 : "F10" : 36 : "Commit"
117 : 0 : "F6" : 65 : "Create Record"
10 : 1 : "Shift Enter" : 82 : "Cursor to Home" # sdsu uses this
123 : 0 : "F12" : 82 : "Cursor to Home" # sdsu uses this
 #: --Alt+Home works, but leaves the Action (first
 #: --pull-down menu item) highlighted. Press Esc or
36 : 8 : "Alt Home, then Alt" : 82 : "Cursor to Home" #-- Alt again to clear highlight.
117 : 1 : "Shift F6" : 63 : "Delete Record"
119 : 0 : "F8" : 77 : "Execute Query"
120 : 0 : "F9" : 29 : "List of Values"
9 : 0 : "Tab" : 1 : "Next Field"
40 : 0 : "Down-Arrow" : 7 : "Next Record"
9 : 1 : "Shift Tab" : 2 : "Previous Field"
38 : 0 : "Up-Arrow" : 6 : "Previous Record"
112 : 0 : "F1" : 35 : "Show Keys"
116 : 1 : "Shift F5" : 69 : " Clear Block"
116 : 2 : "Ctrl F5" : 3 : " Clear Field"
113 : 1 : "Shift F2" : 80 : " Count Query Hits"
112 : 1 : "Shift F1" : 78 : " Display Error"
114 : 0 : "F3" : 73 : " Duplicate Item"
115 : 0 : "F4" : 64 : " Duplicate Record"
69 : 2 : "Ctrl E" : 22 : " Edit Field"
122 : 0 : "F11" : 75 : " Enter " # Causes validation, w/o cursor move
118 : 0 : "F7" : 76 : " Enter Query"
81 : 2 : "Ctrl Q" : 32 : " Exit"
112 : 2 : "Ctrl F1" : 30 : " Help"
34 : 0 : "Page Down" : 66 : " Next Set of Records"
119 : 1 : "Shift F8" : 79 : " Print"
10 : 0 : "Enter/Return key": 27: " Enter/Next Field"
33 : 0 : "Page Up" : 12 : " Scroll Up"
116 : 0 : "F5" : 87 : " F5 Key for special uses"
#121 : 3 : "Shift Ctrl F10" : 82 : " Function 0" #--disabled. Cursor to home defined above
112 : 3 : "Shift Ctrl F1" : 83 : " Function 1"
113 : 0 : "F2" : 84 : " Function 2"
113 : 11: "Ctrl Alt Shift F2":95: " List Tab Pages" #<-REQUIRED, or F2 cant be assigned
114 : 3 : "Shift Ctrl F3" : 85 : " Function 3"
115 : 3 : "Shift Ctrl F4" : 86 : " Function 4"
117 : 3 : "Shift Ctrl F6" : 88 : " Function 6"
118 : 3 : "Shift Ctrl F7" : 89 : " Function 7"
119 : 3 : "Shift Ctrl F8" : 90 : " Function 8"
120 : 3 : "Shift Ctrl F9" : 91 : " Function 9"Finding Forms 10g Patchsets
Here is how to do the search: Log into metalink ( https://metalink.oracle.com ), then click on the Patches & Updates tab, then Simple Search.
In "Search by", select Product or Family. Enter "Developer Forms" in the box.
Then click the Release choices, and select "iAS 10.1.2.3"
Patch Type should be "Patchset/Minipack"
Platform or Language should be "Microsoft Windows (32-bit)"
Click Go, and the Forms 10g patch should show up. As of July, 2008 the only one available is: [url=
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622&release=1710123&plat_lang=912P&patch_num_id=943599
]5983622
Edited 2008-12-12 to add a link to Oracle Note 559067.1 and added the fmrweb.res file listing.
Edited 2008-10-28 to change text format to work better within new forum format
Edited 2008-7-7 to add patchset search information.
Edited 2008-4-21 to modify information.
Edited 2008-3-6 to add information.
Edited 2008-5-29 to update information.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

CAN'T INSTALL ITUNES 9 ON WINDOWS VISTA 64-BIT OS

Hey guys!
I'm having a reaaaallly hard time installing iTunes on my Windows Vista 64-bit OS. Everytime I think it's about to finish installing, it shows me this message:
What does it mean?? Can someone PLEASE help me, I haven't had music on my iPhone for 4 weeks now!

Curses ... you did everything right by providing the screenshot, thanks. But we really need to see the error message number that shows up after the "HRESULT" bit for one of those, and it's deciding not show us that.
Okay ... people who get these error messages for iTunes installs typically are also getting Windows updates failures too. So we'll try to work out what the iTunes/Updates issue is by checking your Update history.
Go into your Windows Update and click "Update History". Have updates been failing for you recently? If so, doubleclick on each failure to bring up a small window showing some info about the failure.
What error message codes are you getting for the Windows Updates failures? (For example, 0x8007000B, or something else?)

Loosing Right Click When Install CS4 64bit on Windows Vista 64

Similar Messages

Maybe you are looking for