Loosing the quality of the texture when published !

Hello all...
I am using Captivate4.
In my projects I used to use header as the texture.My header contains gradient fill and of a texture.
When I publish my project the gradient fill area is loosing the quality and getting splitted into two color ranges of the gradient fill.
When I took a plain header, there is no change in the output.
I am sending the the images for your idea of  " how the output is...."
This is the original image.
This is the quality lost image after publishing.
Why is this happening ?
Regards,
Kartik.P

Hello,
Some questions: what is the format of the texture (JPEG, GIF, PNG)? Was it created in the resolution you needed? What are the settings when publishing for the SWF Size and Quality? Is the option 'Retain Slide Quality' activated or not? If it is activated, what is the slide Quality that you use: Low, Optimized, JPEG or High?
Lilybiri

Similar Messages

  • I have all my music on an external media drive that has crashed. How can I get the music of my ipod touch back onto the comupter without loosing the music when it syncs?

    I have all my music on an external media drive that has crashed. How can I get the music of my ipod touch back onto the comupter without loosing the music when it syncs. in order to start rebuilding my music collection?

    You should be able to recover the media with the tips in  this post from forum regular Zevoneer but I'm not sure what the implications are for your application settings. You can probably transfer your purchases into a newly authorised library, backup the device, recover any other media using third party tools, then restore the device from the backup. That should switch the assocation of the device to the new library but it is not something I've personally tested.
    When you get it all working, make a backup!
    tt2

  • Fonts don't look the same when published...

    why is it when i publish my site to a folder the fonts on some pages do not appear the same as they show in iweb...
    i have 8 pages...
    home page looks fine just as in iweb...
    the remaining pages have a bolder font and doesn't look nice...
    i have checked and double checked every page and all fonts are the same...
    helvetica size 15...
    why is this happening...?
    what can i do...?

    In iWeb click on +Help > iWeb Help+. In the pane that opens you'll see a search bar in the upper right corner. Copy & paste the following into it:
    If text or a shape gets converted to a graphic
    ...and hit Enter. That same phrase should appear in the resulting list of +Help Topics+. Double-click it.
    Follow the steps outlined under +"To identify items that will be converted to graphics when published:"+
    ...Do yellow badges appear on the text you're having problems with? If so, your text is being converted to graphics — to view the fonts least likely to be converted, click the Fonts button in the lower-right corner. In the Font panel under Collections, click Web.
    On the other hand, if yellow badges don't appear then this may apply:
    +"...my text boxes were too small, so a lot of my formatting got messed up when I published the site."+ — Quoted from this old thread:

  • Can I publish one page at a time to the ftp when publishing entire site?

    I am currently using iweb to manage my website and i changed a number of pages and require to re-publish the entire site. When i go to do this it attempts to bundle all the files together and publish, but the site only allows for 8 connections via ftp. Is there a way that when i publish the entire site that i can publish one page at a time?
    Thanks for your help!

    Publish your site to a local folder...
    http://www.iwebformusicians.com/iWeb/Publish-Website.html
    ... and upload the files using an FTP application...
    http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html
    That way you can upload individual files and folders - one at a time.

  • How do I keep the action created in Flash (.fla) the same when published in .swf or .html?

    I created a complex fixed line and a bird flying on the line using tweens from point A to B to C.  When I view the birdline in play or by scrubbing across them in the layers mode, the bird follows the line just as designed.  When I test the birdline in "test Scene" or "test movie" one bird flies from point A to C, then another bird appears at point B and flies the course to point C.  The published .swf and .html do the same as the test functions.  What can I do to get the published version to behave the same as the design?

    Rob,
    Thanks for your response.  There are no error messages in the test functions, and no alerts in the keyframes.  They show green.
    Attached you will find both the .fla file and the .swf file.  I am new at this, so your help is greatly appreciated.
    Richard (Sir rpm)
    PS- I am sitting in Sweden right now.  So I am off to bed and will be back on line in the morning.  Please forgive the delay in my response.

  • Does there be any change in the dimensions of the project when published in a web browser ?

    Hello all.
    I am facing a problem with the dimensions of my project. I need my published project in the web browser must fit in the window without any scrolling.
    I started my project with the dimensions 1024*540. when I tested it at the initial stage it was exactly fitted in the window. But after adding the content & images, the published file is getting opened with scrolling.
    The actual space for the project in the browser is 1024*577.
    As the default playbar's height is 32px, I took the project as 1024*545. Even then I got a bit vertical scrolling. So I changed the dimensions to 1024*540.
    I use Mozilla Firefox as my default browser.
    When I open the file in the Internet explorer it is getting opened only with horizontal scrolling.
    Can anyone give the solution & let me know what exactly the problem is?
    Regards,
    Kartik.P

    Hi Kartik,
    The dimensions should not change ideally. Could you please share your project with us?
    Thanks,
    Sikandar

  • IWeb quits at half the preparation of the files when publishing the whole site

    SOS ! After having saved my site on a local folder, I can't publish anymore my whole site through iWeb to FTP. iWeb quits when arriving at half the preparation of the files for publication. At one moment I had the message "Insufficient memory" (?!?). My site www.yesicannes.com is now big enough after one year of reports published with many pictures, but before I published my site on a local folder, I had no problem publishing frequent updates. But as I published on a local folder, I have to publish again the whole site and iWeb stops all the time before the publication. Any help please ?
    [email protected]

    I was referring to the group of links on the first page and other pages:
    but now realize that's not the part of your site you're referring to.
    I'm not sure how you have your magazine site organized. Based on just what i've seen on the first page of the magazine page you could put all of the December pages in it's separate site and link to the site as you link to the pages only they are in a separate sitel 
    To split the sites, say by month, make a copy of your domain file and name it December.sites2.  Open that domain file and delete all of the pages from it except those associated with December.  Then make another copy of the full domain file and delete all files except those for November.  That should reduce the size of each domain file down to a more reasonable size. 
    You could do this all locally, i.e. publishing to a folder on your hard drive,  while leaving your online site untouched until you've got it worked out. However you will have to publish them to your server so that you can get the hyperlinks between sites established.  You can do this by giving the sites names, i.e. December, etc. and non with the same name as your current site.  Once you have the new site(s) up and running to your satisfaction change the current site so that the magazine files are not in it's domain file and the link to the magazine
    points to the new magazine site.  You'll see what I mean and can refine the concept to fit what you need.  I have a family site that has nearly 80 pages, each of which is a separate site.  So when I finish with a page (nearly all are never edited once they are published) I can put that domain file aside (but backed up) and not have to deal with it.
    You can lay it out graphically on paper to get an idea how you will want to separate and group the pages.

  • Im loosing the 'punch' when i record beats into Logic.

    Hi.
    I record beats into Logic from my MPC which could be the 2 track out or 8 separate outs.
    What me and others with the same setup as me are saying is that the beat looses a certain puch and sound to it when we record it into logic. It sounds different playing back in logic than it does on the mpc. The outputs from the mpc go directly into separate channels on my interface and therefore i would think that there would be no difference in sound.
    There is a lack of warmth. I dont know whether any of you could offer me any advice or its just a logic audio conversion thing???? Im not sure
    Any help will be much appreciated. Thanks, Ben

    I and others have also heard this. My opinion is that it's something to do with recording at 24-bit, that makes the sound clearer and wider, but it's not as punchy as a 16-bit recording of the same thing. Unfortunately, this goes against what the entire industry wants us to believe, so I'm not expecting any help with this issue soon since most people will deny it exist.
    Try recording your tracks into a small audio app like Peak or Soundforge that allows you to record at 16-bit. (I'm not sure turning off 24-bit recording in Logic does this)...
    ..then import the 16b tracks into a Logic project (at 44.1 khz), and export to CD....you should notice your "punchy" base is back again.
    Sorry I can't help other than to say I, and others, hear it too, and we're all trying to figure out what to do about it.

  • My facetime says it looses the connection when i try and make a call ? Why ?

    When I try and call someone else who has facetime through ipod on wifi , It wont ring and then it says Connection Lost . When someone calls me i accept the call but It hangs up because it says Connection Lost .

    I have the exact same problem with my ipod! Ever since i have upgraded to IOS 6, whenever i try to ake a call it will say 'connection lost' and when i try to ring someone, it wont make a ringing noise and when i accept it again says ' connection lost' it has never done this to me before since the upgrade! could it be due to my network/wifi, im on orange?

  • I have recently upgraded to a smart phone. Samsung Galaxy 3s. Why does it loose the signal when I am inside a building? It is suppose to be 4G!?

    Whys does my Samsung Galaxy 3s loose reception inside a building? I can get updates from running apps but not so good on phone calls or texts.

    Building materials will degrade radio signals and in many cases kill them altogether. It's called attenuation This is true with cell, AM/FM Radio, Tv signals. Signals aren't magic. Especially if a building is surrounded by metal and concrete. Especially metal. A building with a metal roof is a signal killer.
    Also calls and texts do not use the 4G signals. They use 1x. Version's 4G uses a lower frequency than 1x thus it is better able to handle going through buildings.

  • How can I centre the page when publishing?

    Hello,
    How can I avoid a big gap on top during preview the site? Or how can I centre the entire page to the screen precisely?
    Thanks.
    Alex

    Make sure your Top padding is set to '0' in your site properties dialogue box. (File/Site Properties)
    Also make sure the check mark is on to Center your site horizontally.

  • Hi ! dont know But when im saving my project to an PDF file i loose quality on the project.  I dont know what to do. its very importent for me to not loose the quality

    Hi i loose my quality on my project when im saving to an PDF file.  . What to do?

    lq,
    Are you working in RGB Color Mode? If so, you will almost certainly be disappointed when the colours are squeezed into the smaller CMYK gamut.
    There may also be a question of colour management/settings.

  • Image colors depend on the computer that publishes my Domain file?!?!

    Here's a weird one... First, the setup.
    My site is published from two different computers both using iWeb '08, using the same Domain.sites2 file that's passed from computer to computer using my idisk. The Domain file is always copied down to a local computer before new changes are made and published. Recently, I've noticed, that publishing from one of the computers (but not the other) results in overly intense colors, especially in the red tones. This I tested by accessing my site with Safari and opening one of the overly intense images. Leaving the browser page open, I then republish my site using a different computer, accessed the page again... and the images is normal! On screen you see the previously published image beside the newly published image, and the color deffirecenes are obvious, even though the same file was being published without modification.
    Can anyone think of why this is happening? I can't imagine iWeb treating the publishing of images differently from computer to computer, unless there is some other weird computer-dependent processing going on.
    Thanks for any ideas!
    John
    aking the same Domain file, and without replacing the

    Unfortunately, the issue is not with which pages get published (that works fine), but with the amount of color in the images that are published.
    Imagine this...
    You have a JPEG photo of a sunset that is stored on an idisk. The photo is downloaded to Computer A, placed onto a page in iWeb, and published to the web. Here, the photo appears on the web site as one would expect (blue sky, subtle oranges and reds, some purples). The Domain.sites2 file is then copied onto the idisk.
    Now, on Computer B the Domain.sites2 is downloaded from the idisk, and opened in iWeb. A change is made to the page (not a change to the photo) and the site is republished. When visiting the site a sunset still appears, but the blue sky is now really, really blue, and the subtle oranges and reds are now intensely red. It would appear that a significant amount of contrast and saturation has been added to the photo.
    Something about publishing is different on Computer B.
    Here's some additional interesting data.
    The original photo file is 1024 x 656 pixels and 391K in size.
    The photo is sized in iWeb to be 605 x 388.
    After the initial publishing from Computer A (the one in which the image looks fine), and upon investigating the Site folder created on MobileMe, the photo file has been resized to be 605 x 388 and now occupies 108K. After publishing from Computer B (where the image is contrasty and oversaturated), the dimensions of the file are still 605 x 388, but the size of the file when published from Computer B is 111K, so the file as published from Computer B is clearly different.
    I'm guessing that this has something to do with how iWeb treats rescaling an image on one computer (or, maybe, version of Mac OS X or Quicktime?!?!) to another.
    Does this sound familiar to anyone?
    Thanks!
    John

  • How do I remove old web site when publishing new site with same URL in iweb? Hit replace when publishing new iweb site (so we could have control over changes) but new site name is attached to old via a / after our www address we want to keep.

    I hit the replace when publishing the new iweb site (so we could have control over changes - last one was not an apple based site) but new site name is attached to old via a forward slash and underscore after our www address. Makes it very messy with a very long web address.  Original address now followed by iweb site name followed by name of first page? Went for iweb as not that computer literate - all going so well?! Cheers for help in anticipation. Have to get off to work now but be great end to week if we could be sorted tonight. Rupes

    Well yes of course, if you try and publish through iWeb there won't be an option to publish without your site folder which is exactly why I told you to download Cyberduck and use Cyberduck to upload your site to your server having published your site from iWeb to a local folder.  That is what you need to do if you don't want your site name to be included in yoru url.
    It would have been easier also if you had used Cyberduck initially to connect to your server and delete your old site yourself - at least that way you would have deleted the correct files rather than relying on your hosting service to do it and doing it incorrectly.
    Download Cyberduck and then select the publish to a local folder option from iWeb and then use Cyberduck to upload your site to your server, but rather than uploading the whole site folder and separate index file, upload ONLY the contents of your site folder and then your url will be http://www.domain.com/page_name.html.
    It really isn't rocket science!

  • Static text in textfields renders differently when published in CS4/CS5

    Hi
    I am experiencing an issue where legacy files I created in Flash CS4 look different when published in CS5. Fonts are rendered differently. I have noticed it so far on DIN and Goudy Modern. The output when published in is CS5 is markedly different than the output when published in CS4.
    Can anyone offer any pointers on how to think about, deal with, avoid etc.
    Many thanks.
    Mike
    UPDATE
    A little more logic to add.
    It seems to be opening the file in CS5 changes the fonts somehow. CS4 files that I have not opened in CS5 publish as I would expect in CS4. CS4 files that I have opened in CS5 publish differently whether then published in CS5 or CS4. On Goudy for example. In CS5 adding .5 to the character spacing and 3.5 (not 2) to the line spacing makes the font render similarly in CS5 as it did in CS4 at 0 character spacing and 2 on the line height.

    Yes. It's static. I recreated the text and now it works. Weird.
    Thank you for your reply and time.

Maybe you are looking for