Loosing the right to reply to messages

Hi EVERYBODY 
i know this has no relation with what this board is about. but i suddenly lost the right to reply to messages . what can i do guys ?
Bill David

jcarmody wrote:
Bildavid wrote:
Hi EVERYBODY 
i know this has no relation with what this board is about. but i suddenly lost the right to reply to messages . what can i do guys ?
P@Anand wrote:
In which board you are not able to reply or Nowhere you can post replies?
That's funny because the OP didn't respond. 
I thought he might be trying to reply to this board
The best solution is the one you find it by yourself

Similar Messages

  • How do I change the layout in mail so the right side of all messages aren't cut off?

    When I upgraded to the new Mavericks operating system I decided to give mail a go rather than using my internet based email.  However, I cannot seem to adjust the inbox view so that my messages aren't cut off.  Right now all of my messages are pushed over to the right and there is no way that I can find to move them to the left so I can read the whole message.  I have the list of emails as small as it will go, but the preview section has a big white space to the left of messages and then the right side of the messages are all cut off.  How can I fix this?  THANKS

    You could also try reading the Help instructions:

  • "Not the right kind of document" message

    I'm running CS3 under Vista Home Premium. Has worked fine.
    Downloaded ACR ver 4.1 and dropped it into the "File Formats" folder, having removed the old ver 4.0 first.
    I shoot Nikon Raw (.nef).
    Started Bridge. No thumbnails. Read the instructions on blowing out the thumbnail cache. Think I've done that correctly.
    Problem not resolved. When I double-click on one of the .nef files, a message appears saying "Not the right kind of document."
    Have I done something incorrectly?
    Should I uninstall CS3, reinstall, and try to put ACR 4.1 in again?

    Where did you install ACR exactly?
    Read the FAQs and the "Debugging" thread, please.

  • Problem of loosing the rights after sending to Reader Extension

    I am getting a strange error.
    I was having a perfectly working version of Reader Extension and Forms Server. I am creating a dynamic PDF Form using the Forms Server. This form is being updated using the Adobe Reader and then submitted back to my application. I am also using ARES to enable rights for adding comments on the PDF document.
    I am using Forms Server 6.0 and also ARES 6.0.
    This was working fine with Adobe Reader 7.0 but recently I installed the Adobe Reader updates 7.0.1 to 7.0.3. I am not sure if this is related but suddenly I have started getting the following error:
    "This document contained certain rights to enable special features in Adobe Reader. The document has been changed since it was created and these rights are no longer valid. Please contact the author for the original version of this document."
    I am getting this error not only on the newly created forms and also for earlier forms to which I had dynamically added rights using ARES. These were the forms which were working absolutely fine earlier.
    I tried to uninstall and reinstall Reader on my system and also tried to open the document on a system on which the updates had not been done but this has not solved the problem.
    Does anyone have any idea of why this problem could suddenly come up into my application.

    Hi,
    We are getting the same error and did not have an evaluation so not quite the same.
    What it looks like here is if a computer only has Acrobat 7 Reader on it - we don't get the error but if this is a computer that has another version of Acrobat - ie. 7 professional - we do get the error. We can open up the file intially, fill in the form and do a save or save as and close. When you open up the file again to continue filling out the form - it gives you the exact error noted in this post.
    Any ideas would be appreciated.
    Thank you.

  • After upgrading my iphone 4 to io6 i started loosing the historical sms messages from some senders including new ones received as soon as I open the message app. I am not happy with io6. please advise how i could downgrade to io5.1.1.

    After upgrading my iphone 4 to io6 i started loosing the historical sms messages from some senders including new ones received as soon as I open the message app. I am not happy with io6. please advise how i could downgrade to io5.1.1.

    I have read a number of other threads regarding the loss of Messages, however, I am not aware of the reason it is happening. Check on the right side of this message under more like this and see if you can find an answer.
    As to your question about downgrading software, there is no Apple supported method for downgrading software.

  • After updating to iOS 6.1 reply with message is not working

    Apparently after I updated to iOS 6.1 when somebody rings I do not have the option of replying with message or any other option. Is there a setting that I need to do or is software based?

    Are you sliding this up?

  • How to put the categorize option on the right click of the mouse option in Outlook 2013

    In Outlook 2010 I was able to right click and categorize my emails. In Outlook 2013 I have not figured out how to use the right click on a message to put it into a assigned category. Is there a way to add a short cut on the right click?

    Hi,
    The categories option should be there the same as Outlook 2010. Please try to run Outlook in safe mode (outlook.exe /safe) to check if there are some add-Ins blocked this.
    If safe mode doesn't fix this issue, I would suggest you to create a new Outlook data profile to check behavior. For how to create an Outlook profile, please refer to:
    http://office.microsoft.com/en-us/outlook-help/create-an-outlook-profile-HA102749460.aspx
    Also, please note that if you are using an IMAP account, then you will not able to see categories options as the IMAP account protocol does not support the category property.
    Ethan Hua CHN
    TechNet Community Support

  • Reply with message

    Hi,
    i have a new iPhone 6
    and i can't reply from the lockscreen ? All buttons are green..?
    help

    Don't get the option to "Reply With Message" at all. Except, it seems, when I'm syncing the phone. Weird.  As for having to reset the phone, it's 2 days old. If things aren't working as they should after just 2 days then someone should be hung. Had two iPhone 4's, one the battery life was abysmal and the display was yellow, the second the sleep/wake button failed followed shortly by the display.  Gave Apple a last chance with the 5S, really really disappointed.  What has gone wrong with them?

  • The new Reply with Message or Reminde me Later options are not showing on iPhone 3GS after upgrade to ios 6

    I just upgraded 2 iPhone 3GS to ios 6 and on neither one is there an option to "Reply With Message" or "Remind Me Later" when there is an incoming call. There is no little phone icon (like the camera one on the lock screen) that you can drag up to expose the new options. Is there something more that needs to be done to enable these features? I tried changing the 3 canned messages from the settings but with the same result. From what I read this is suppose to be available on iPhone 3GS

    Swiping up does nothing, the options do not appear. I tried swiping up all over the screen when a call comes in and nothing. The incoming call screen looks identical to how it appeared in ios 5. My understanding was that with ios 6 there is supposed to be a little phone icon in the bottom right hand corner (similar to the camera icon on the lock screen) appear on the incoming call screen and you swip up on this icon to reveal the options. This icon is not shown on the incoming call screen on either phone.

  • Replying to messages in thread view replies to the first message

    I have set Mail so that I see messages in threads together with other related messages (across mailboxes).
    However, when I try to reply to a message using ctrl-R, by deafult Mail replies to the oldest message, rather than the newest one.
    Any idea why this may happen?
    thanks!

    That is not the way it behaves for me.  I just tested it by selecting a "conversation" and hitting command-R, and it replied to the newest message.  Are you using the classic layout (like Mail in Snow Leopard) or the new Lion layout?
    If you're using the Lion layout, note that clicking anywhere in a message in the conversation will select that message, and then replies go to that message instead.  Selection is subtle, but you can tell a message is selected from a blue "glow" around the edges of the message and the number in the upper right corner of the message turns blue.

  • Accepted solutions: mark a reply as the right answ...

    Hi all,
    we have just added a new feature called "accepted solutions" to these boards.
    It means that anyone who starts a new topic is able to mark any given answer as the correct solution. This helps other people who have the same question to find the right answer faster.
    All topics that have an accepted solution will be shown with a small icon, and the first post will have a quick link to the solution.
    Note that you can do this also with any old topics that you have started. So if you remember any particularly helpful answers from the past, feel free to visit those topics and mark the right answer as the solution.
    Solutions will not have any effect on your ranks (sage, professor etc.) but we may come up with new ranks in the future for people who have written a lot of solutions.
    Moderators and administrators are also able to mark solutions, but we will not do that systematically (e.g. no-one from Nokia is officially going through and validating any answers).
    However, we can mark a topic solved when it's clear from a "thank you"-reply that this was the right answer (starting from today, so please don't PM us a list of your existing answers )
    I hope you will find this useful! This is a new thing for us so we don't really know how it will work out - but it seems like a great little feature.
    Message Edited by vandelay on 17-Jun-2008 03:19 PM
    I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

    02-Jul-2008 07:46 PM
    illinjah wrote:
    Funny that you can accept a solution that you wrote for a thread you started yourself...
    That's on purpose - sometimes people come up with the right answer on their own, and accepting that as the right solution helps others to find it as well.
    I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

  • Please fix your web plugin immediately, yes this message in the right forum

    Ok.
    On my mac, java takes about 5-10 seconds to load in a web page applet from either safari or chrome.
    This is 4.9 to 9.9 seconds too long.
    PC is a bit faster but not much.
    Sun absolutely wrecked java with respect to the web-client.
    Please fix this.
    Why: Because I want to write web-apps which don't suck. Which means I can't use javascript. Because despite the gajillions of money poured into marketing, it is really very, very slow.
    How to fix:
    It is very easy.
    1. Use PhoneME with JIT. (get startup time to near zero). You might say, "well, we're about to get java to have zero startup time." But this is what you have been saying for ever, and failing at, miserably! Stop trying, give us a JavaME plugin instead.
    2. Do NOT distribute monolithic massive class libraries. Instead, give me the opportunity to create class loaders. (I know you think you already do, but please look up the 10 year old bugs regarding the web plugin and class loaders). Make the distributable as SMALL as possible.
    3. Are you writing the pluginin "in-between" code in webkit? If you are, fire who ever is writing it. If you aren't, WTF, the connection between the browser and java is slow as a slug. If I was just a bit more of a cynic I would think google is putting in usleep(1000) between calls. Take this code over NOW.
    Look, you STILL have a tremendous opportunity in the web-client-space.
    You need to show that Java is BETTER than javascript. Which it could be.
    But currently it sucks.
    It uses too much memory, it has a slow startup time, the connection between javascript and java is slow.
    I should be able to write <script type="jar.pack.gz/java" src="blahblah.jar.pack.gz"></script> and multiply my performance by a thousand. Please do it.
    I should be able to use a java2javascript library to simplify modifying the dom.
    I shouldn't have to write javascript, except for inline code.
    BUT INSTEAD I'M SPENDING MY TIME OPTIMIZING GWT.
    Javascript sucks, we all know it is rising because of a vacuum of any real performance.
    Please fill this void, or someone else will.
    Thanks,
    -tim

    yes this message in the right forum No it isn't. This is a user to user forum. If you want Oracle's attention, submit a bug report, or contact their support channels.
    Locking this thread.

  • I "reply"ed to an e-mail message. The next time when I chose to write a new message and type the first letter of the person I replied to earlier, that name and e-mail address appears as a choice included in a pop up list of my contacts.

    I "reply"ed to an e-mail message. The next time when I chose to write a new message and type the first letter of the person I replied to earlier, that name and e-mail address appears as a choice included in a pop up list of my contacts. The persons name is not in my contacts and I would like to delete it from popping up. Do you know how I can do this?

    The Mail app on the iPad/iPhone/iPod Touch does have an option to clear previous recipients. You can learn to live with it.  But if you want to get rid of it, the only way to remove these cached email addresses from the Mail application is restoring the iPhone/iPod Touch as a new phone/iPod.  If you restore from backup, the cache is also restored.
    This article shows you the screens you will see during the restore:  http://support.apple.com/kb/HT1414

  • I'm embarrassed to ask this: when I click to initiate a new email message in the "From" box it automatically chooses the wrong email address (I have three but use one mainly). How can I get the right choice to appear automatically?

    I'm embarassed to ask this: when I click on the new mail icon to write a new email message, in the box "FROM" appears the wrong email address: I have three but mainly use one. How can I correct this so that the right email address appears in the "FROM" box?

    I assume this is Apple Mail. Try this:
    Preferences > Accounts > your-first-account
    Select Outgoing Mail Server of account/name you wish to use and check Use only this server
    Repeat for other accounts.

  • How can I see the entire mail message without making it smaller font and not having to scroll to the right?

    when i open a message in hotmail i have to scroll to the right to see the entire sentence. I did not have to do this before what has changed? Me or you?
    Thanks

    You can use an extension to set a default font size and page zoom on web pages.
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
    If you have increased the minimum font size then try the default setting "none" as a high value can cause such issues.
    *Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    Make sure that you allow websites to choose their fonts.
    *Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"

Maybe you are looking for