Loosing Wireless Connection

My MacBook Pro looses connection after 15-30minutes unless within 2-3ft. of my AirPort Express. My G-4 stays connected just fine. My son's less than one year old MacBook stays connected. My old, old HP (7+ years) stays connected. I have Comcast but I'm not sure of the "product". My network is high speed cable with an Ambit modem and AirPort Express. My MacBook Pro does hold a signal unless it is within 2-3 of the AirPort and this is true in other locations such as my work (not sure of the router since it's a public school building) and my friend's house (Belkin router). Here is a list of things I have done so far to try to remedy the situation:
Per Apple Store Genius:
removed all wireless devices (phones, etc.) still no solution
checked for hardware issues
Per Apple Support:
changed channels
run utility and repair disks
uninstalled the operating system (wiped the hard drive clean) and reinstalled OS 10.5.6
Tried myself:
turned on Interference Robustness
All of this has has little impact/effect on holding the connection. Apple Support can no longer help. Apple Genius says they have done all they can or will do telling me it's interference. I bought my machine in 2006 and did not have this issue until Wed. 4/8/09. I am wondering why interference just on the newest Mac and why suddenly. Most importantly, how to solve?
Can anyone advise?

First, if you are not referring to a unibody MacBook Pro, you should post in the following forum, as you will be able to receive better suggestions.
http://discussions.apple.com/forum.jspa?forumID=1149
Second, can you try a different Internet connection in a different location? If it works there, the problem is not with your MacBook Pro.
Good luck!

Similar Messages

  • [SOLVED] Loosing Wireless Connection

    I am constantly loosing my wireless connection while I am trying to download something, usually I don't reach 60 MB and it's gone.
    I am also loosing my connection while browsing the internet for 2-3 hours.
    In both cases it reconnects after 2 minutes ,sometimes more.
    I still have my IP address during these 2 minutes.
    I tried different connection methods : wifi-menu, netctl, NetworkManager , manually with wpa_supplicant and dhcpcd(or dhclient) but they all lead to loosing my connection after a time.
    iwconfig
    enp11s0 no wireless extensions.
    wlp2s0 IEEE 802.11abgn ESSID:"FRITZ!Box Gastzugang"
    Mode:Managed Frequency:2.412 GHz Access Point: AccesPointX
    Bit Rate=52 Mb/s Tx-Power=19 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Power Management:off
    Link Quality=40/70 Signal level=-70 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:1698 Invalid misc:454 Missed beacon:0
    lo no wireless extensions.
    ip addr show
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    valid_lft forever preferred_lft forever
    2: enp11s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
    3: wlp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
    inet 192.168.179.32/24 brd 192.168.179.255 scope global wlp2s0
    valid_lft forever preferred_lft forever
    sudo journalctl -u NetworkManager.service
    -- Reboot --
    Mar 15 18:05:03 Alik NetworkManager[161]: <info> NetworkManager (version 0.9.8.8) is starting...
    Mar 15 18:05:03 Alik NetworkManager[161]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
    Mar 15 18:05:03 Alik NetworkManager[161]: <info> WEXT support is enabled
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
    Mar 15 18:05:09 Alik NetworkManager[161]: keyfile: parsing Auto FRITZ!Box Gastzugang ...
    Mar 15 18:05:09 Alik NetworkManager[161]: keyfile: read connection 'Auto FRITZ!Box Gastzugang'
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> monitoring kernel firmware directory '/lib/firmware'.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> rfkill2: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy0/rfkill2) (dri
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> rfkill0: found WiFi radio killswitch (at /sys/devices/platform/dell-laptop/rfkill/rfkill0) (platform driver dell-laptop)
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WiFi hardware radio set enabled
    Mar 15 18:05:09 Alik systemd[1]: Started Network Manager.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WiFi enabled by radio killswitch; enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WWAN enabled by radio killswitch; enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WiMAX enabled by radio killswitch; enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> Networking is enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): using nl80211 for WiFi device control
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): driver supports Access Point (AP) mode
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 3)
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): exported as /org/freedesktop/NetworkManager/Devices/0
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): bringing up device.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): preparing device.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): deactivating device (reason 'managed') [2]
    Mar 15 18:05:09 Alik NetworkManager[161]: <warn> failed to allocate link cache: (-26) Protocol mismatch
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): carrier is OFF
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): new Ethernet device (driver: 'tg3' ifindex: 2)
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): exported as /org/freedesktop/NetworkManager/Devices/1
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): bringing up device.
    Mar 15 18:05:10 Alik NetworkManager[161]: <info> (enp11s0): preparing device.
    Mar 15 18:05:10 Alik NetworkManager[161]: <info> (enp11s0): deactivating device (reason 'managed') [2]
    Mar 15 18:05:10 Alik NetworkManager[161]: <info> Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:1c.5/0000:0b:00.0/net/enp11s0
    Mar 15 18:05:10 Alik NetworkManager[161]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
    Mar 15 18:05:10 Alik NetworkManager[161]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
    Mar 15 18:05:11 Alik NetworkManager[161]: <warn> Couldn't acquire object manager proxy: Error calling StartServiceByName for org.bluez: GDBus.Error:org.freedesktop.systemd1.Loa
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> wpa_supplicant started
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0) supports 4 scan SSIDs
    Mar 15 18:05:11 Alik NetworkManager[161]: <warn> Trying to remove a non-existant call id.
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: starting -> ready
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: ready -> disconnected
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0) supports 4 scan SSIDs
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Auto-activating connection 'Auto FRITZ!Box Gastzugang'.
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) starting connection 'Auto FRITZ!Box Gastzugang'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> (wlp2s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> NetworkManager state is now CONNECTING
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) scheduled...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) started...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) scheduled...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) complete.
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) starting...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> (wlp2s0): device state change: prepare -> config (reason 'none') [40 50 0]
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0/wireless): connection 'Auto FRITZ!Box Gastzugang' has security, and secrets exist. No new secrets needed.
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'ssid' value 'FRITZ!Box Gastzugang'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'scan_ssid' value '1'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'psk' value '<omitted>'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) complete.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Config: set interface ap_scan to 1
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: disconnected -> inactive
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: inactive -> associating
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associating -> associated
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associated -> 4-way handshake
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: 4-way handshake -> completed
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'FRITZ!Box Gastzugang'.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) scheduled.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) started...
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): device state change: config -> ip-config (reason 'none') [50 70 0]
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> dhclient started with pid 321
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Beginning IP6 addrconf.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) complete.
    Mar 15 18:05:15 Alik dhclient[321]: Internet Systems Consortium DHCP Client 4.3.0
    Mar 15 18:05:15 Alik dhclient[321]: Copyright 2004-2014 Internet Systems Consortium.
    Mar 15 18:05:15 Alik dhclient[321]: All rights reserved.
    Mar 15 18:05:15 Alik dhclient[321]: For info, please visit https://www.isc.org/software/dhcp/
    Mar 15 18:05:15 Alik dhclient[321]:
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): DHCPv4 state changed nbi -> preinit
    Mar 15 18:05:15 Alik dhclient[321]: Listening on LPF/wlp2s0/XX:XX:XX:XX:XX
    Mar 15 18:05:15 Alik dhclient[321]: Sending on LPF/wlp2s0/XX:XX:XX:XX:XX
    Mar 15 18:05:15 Alik dhclient[321]: Sending on Socket/fallback
    Mar 15 18:05:15 Alik dhclient[321]: DHCPDISCOVER on wlp2s0 to 255.255.255.255 port 67 interval 6
    Mar 15 18:05:16 Alik dhclient[321]: DHCPREQUEST on wlp2s0 to 255.255.255.255 port 67
    Mar 15 18:05:16 Alik dhclient[321]: DHCPOFFER from 192.168.179.1
    Mar 15 18:05:16 Alik dhclient[321]: DHCPACK from 192.168.179.1
    Mar 15 18:05:16 Alik dhclient[321]: bound to 192.168.179.32 -- renewal in 415231 seconds.
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> (wlp2s0): DHCPv4 state changed preinit -> bound
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> address 192.168.179.32
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> prefix 24 (255.255.255.0)
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> gateway 192.168.179.1
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> nameserver '192.168.179.1'
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> domain name 'fritz.box'
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) started...
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> (wlp2s0): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) complete.
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> (wlp2s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> NetworkManager state is now CONNECTED_GLOBAL
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> Policy set 'Auto FRITZ!Box Gastzugang' (wlp2s0) as default for IPv4 routing and DNS.
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> Writing DNS information to /usr/bin/resolvconf
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> Activation (wlp2s0) successful, device activated.
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) starting DHCPv6 as requested by IPv6 router...
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> Activation (wlp2s0) Beginning DHCPv6 transaction (timeout in 45 seconds)
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> dhclient started with pid 380
    Mar 15 18:05:18 Alik dhclient[380]: Internet Systems Consortium DHCP Client 4.3.0
    Mar 15 18:05:18 Alik dhclient[380]: Copyright 2004-2014 Internet Systems Consortium.
    Mar 15 18:05:18 Alik dhclient[380]: All rights reserved.
    Mar 15 18:05:18 Alik dhclient[380]: For info, please visit https://www.isc.org/software/dhcp/
    Mar 15 18:05:18 Alik dhclient[380]:
    Mar 15 18:05:18 Alik dhclient[380]: Listening on Socket/wlp2s0
    Mar 15 18:05:18 Alik dhclient[380]: Sending on Socket/wlp2s0
    Mar 15 18:05:19 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 1060ms.
    Mar 15 18:05:20 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 2120ms.
    Mar 15 18:05:22 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 4380ms.
    Mar 15 18:05:26 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 9150ms.
    Mar 15 18:05:35 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 18730ms.
    Mar 15 18:05:54 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 36040ms.
    Mar 15 18:06:03 Alik NetworkManager[161]: <warn> (wlp2s0): DHCPv6 request timed out.
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> (wlp2s0): canceled DHCP transaction, DHCP client pid 380
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 4 of 5 (IPv6 Configure Timeout) started...
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
    Mar 15 18:11:47 Alik NetworkManager[161]: <warn> Connection disconnected (reason 2)
    Mar 15 18:11:47 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: completed -> disconnected
    Mar 15 18:11:47 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: disconnected -> scanning
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: scanning -> authenticating
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: authenticating -> associating
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associating -> associated
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associated -> 4-way handshake
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: 4-way handshake -> completed
    Not surprisingly , everything works fine on Windows.
    Thanks for the help
    Last edited by ollen (2014-03-16 00:25:44)

    first of all I stopped my NetworkManager.service and then :
    sudo wpa_supplicant -Dnl80211 -iwlp2s0 -c/etc/wpa_supplicant/wpa_supplicant.conf &
    Successfully initialized wpa_supplicant
    wlp2s0: CTRL-EVENT-SCAN-STARTED
    wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    wlp2s0: Associated with XX:XX:XX:XX:XX
    wlp2s0: WPA: Key negotiation completed with XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP]
    wlp2s0: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX completed [id=0 id_str=]
    and then I run
    dhclient wlp2s0
    but no output after this command but I get my IP address
    I also ran this command
    dhcpcd wlp2s0
    and the output is
    dhcpcd[2163]: version 6.3.1 starting
    dhcpcd[2163]: DUID XX:
    dhcpcd[2163]: wlp2s0: IAID XXX
    dhcpcd[2163]: wlp2s0: soliciting an IPv6 router
    dhcpcd[2163]: wlp2s0: rebinding lease of 192.168.179.32
    dhcpcd[2163]: wlp2s0: leased 192.168.179.32 for 864000 seconds
    dhcpcd[2163]: wlp2s0: adding route to 192.168.179.0/24
    dhcpcd[2163]: wlp2s0: adding default route via 192.168.179.1
    dhcpcd[2163]: forked to background, child pid 2558
    a little bit of
    journalctl -u wpa_supplicant.service
    -- Reboot --
    Mar 15 18:05:09 Alik systemd[1]: Starting WPA supplicant...
    Mar 15 18:05:11 Alik systemd[1]: Started WPA supplicant.
    Mar 15 19:53:19 Alik wpa_supplicant[289]: Successfully initialized wpa_supplicant
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Reject scan trigger since one is already pending
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Associated with XX:XX:XX:XX:XX
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Key negotiation completed with XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX completed [id=0 id_str=]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=2
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Associated with XX:XX:XX:XX:XX
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Key negotiation completed with XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX completed [id=0 id_str=]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: rfkill: WLAN hard blocked
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:53:19 Alik wpa_supplicant[289]: rfkill: WLAN hard blocked
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Reject scan trigger since one is already pending
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: SME: Authentication request to the driver failed
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: No network configuration found for the current AP
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: Associated with XX:XX:XX:XX:XX
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: WPA: Invalid EAPOL-Key MIC when using TPTK - ignoring TPTK
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: WPA: Could not verify EAPOL-Key MIC - dropping packet
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: Authentication with XX:XX:XX:XX:XX timed out.
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="FRITZ!Box Gastzugang" auth_failures=1 duration=10
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="FRITZ!Box Gastzugang" auth_failures=2 duration=20
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: Reject scan trigger since one is already pending
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: No network configuration found for the current AP
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Last edited by ollen (2014-03-16 00:17:44)

  • Officejet 6700 looses wireless connection to MAC

    My 6700 keeps loosing it connection with my mac which is running 10.10.4 and the fault seems to have occurred at the time this ios update installed. I have had the mac just over a year and its all worked fine until the 10.10.4 update. I have tried re-booting the airport extreme, the mac, deleting the printer and re-installing none of which resolves the problem fully. If I re-boot the printer it will be found and I can print, but if the next job is more than 10 mins later the mac looses the printer again and will not find it. The same fault also seem present with my ipad retine display model running ios 8.4, again this has been working well for nearly two years. HELP please

    Yes distance/signal strength maters greatly for wireless.
    Get one of these...
    http://eshop.macsales.com/item/NewerTech/MXP2802NU2C/
    A 10' USB extension cable...
    http://eshop.macsales.com/item/Micro%20Accessories/USB2AA120MF/
    And place it high in the Den as close to the source as possible, or near openings where the source is more direct.

  • Color Laserjet Pro 100 (M175NW) looses wireless connection

    Hi,
    the printer goes offline from the local wlan after working ok 12 to 24 hrs.
    symptoms:
    * wireless LED on the printer  blinking after waking the printer with the ok button
    * wireless status page: not connected
    * wireless status page: no wireless lans are found (minimum four others are active)
    * wireless status page: always 69-71 disconnects  (link quality is good, distance from router 5m)
    * wireless lan switched off-on from printer panel: wireless led stays off, no blinking
    my tests:
    * no difference with/without power save mode
    * no difference using router from TP-Link or Arcadyan
    * no difference using no/standard/long group key interval on the router
    * no difference using only ip4/all services on the printer
    * no difference enabling/disabling ip6 on the printer
    * no difference printing/not printing during 24 hrs
    * no difference using channel 1/7 on the wlan (no other networks on these channels)
    workaround:
    printer off - on, everthing back to normal, but I am not happy with that
    My settings
    * printer firmware new: Version:20120806
    * static ip
    * wpa2-personal aes
    * windows vista all patches installed
    * current hp printer driver
    * wlan settings transferred via usb during standard install
    my guess:
    buggy firmware or defective network card in the printer
    Any ideas? Device is on warranty...

    Printer does not maintain wireless connection.  
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Macbook 2009 intermittently looses wireless connection, Macbook 2009 intermittently looses wireless connection

    When I'm on the internet using the airport, I loose my connection all the time. The I don't loose the internet, it just like freezes and eventually it will come back and the action I have tried to get it to do, like go to another page or link etc. it will have done. I can still use the computer itself just not the internet. Crazy huh?
    I have checked in troubleshooting and gone through the manual. I'm not finding an answer. I've checked with my Internet Service Provider, it's not them. Everyone else in my household is staying connected just fine. Is my airport card just going out and I'm out of luck until I replace it? I'm hoping maybe there is an upgrade or something that might help. If you have a suggestion please let me know.
    Thanks

    Solution may be found if you search in the "More Like This" section over in the right column.

  • Loose wireless connection with security turned on

    I am able to get a wireless connection when the wireless network has no security enabled. But when the security is turned on - using WEP or WPA (TKIP) - I can no longer get a connection. The error message says that the password is not correct (however it is).
    Of note: I have another G4 (aluminum 1.33 GHz) running the same version of OS X that does not have a problem connecting with the security turned on.
    I have the same problem at home or with other wireless networks that require passwords.
    At home I have a linksys wireless router.
    Thanks!
    1 GHz PowerPC G4   Mac OS X (10.4.8)  

    i have a very similar situation to yours... my airport cannont get an IP address from any wireless network with security enabled. if it is completely open, it will lock in and get an IP address and everything is fine, but with ANY kind of security enabled, it wont get an IP and gives me the standard "169...." addresses. If i turn off security on a given base station, the machine will suddenly get an IP address, so I know this is a problem with the machine and not the router as other wifi devices connect to the router fine.
    I've tried using standard WEP, WPA, and also MAC-address security and i get the same problem across all of them. Ive tried this with about 5 different routers, 3 linksys, 1 netgear and one dLink.

  • Two desktop computers - one constantly looses wireless connection

    Hi,
    I have a Linksys Wireless-G Broadband Router with Speedbooster (model WRT54GS) for use with a cable modem.  I have two Dell Desktops, both with Linksys Wireless-G PCI with SpeedBooster Cards.  One desktop works perfect with the network, the other constantly loses its connection. Signal strength on both are good, both computers are relatively new (the one with problems is ~ 1 yr old).    I either have to 'repair' the connection or reboot.  It will stay connected for various lengths of time (sometimes a minute, sometimes 10 minutes!).  If i click on the 'Wireless Network Connection' icon, it will often show 'Connected' to my network, but the button in the corner shows 'Connect' (shouldn't it say 'Disconnect?).
    Any help is appreciated!
    Thanks

    Surely, the router is working since one wireless pc is working already. You could focus more on the adapter. Since it has been a year already, you could try to update the driver of your nonworking adapter.

  • 4200v2 looses wireless connection after 24hrs

    Hello All
    I upgraded my Linksys from 160n router to 4200V2 router.  I configured 3 wireless Linksys webcams and they work fine. After 24hrs they i cannnot connect the via HTTP and webcames IP addresses disapear from the DHCP client table.  If reboot the webcames the it works fine for next 24hrs.  I did not make any modification to any settings and the setting looks just like i had on the 160N router.  Any help/suggestions please??

    You could have tried the following settings as well:
    A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
              1] Open the software and go to the option which says "Router Settings"
              2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
             3] Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your router's main/ basic setup page). Here is the link for determining and setting up the correct MTU size: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=fbf8e8564632422eaa8ea80bf9dcba64_386.xml&pid=80&re...
    B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the user name field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.
    Then check the connectivity status…

  • Looses wireless connection all the time.

    Hi
    I have a problem with my macbook pro, it looses its internet connection all the time. I don't know why since it's quite close to it's modem and other laptops that's more far away works fine. Any idea?
    Best regards Frankensten

    Does the router have the latest firmware? What happens when you are at a hotspot or a Starbucks?

  • Wireless connectivity issues with Macbook Pro and At&t service HELP!!!!!

    I have three Computers two PC's and one Macbook Pro( the latest model).My desktop PC is used by ethernet, my girls laptop is used wirelessly and finally my MBP was being used wirelessly.
    I started off with only the two PCs and my internet connection never had a problem and I was doing everything from: on the internet to downloading.
    Before I bought my MBP I had also switched from internet and phone bundle to just internet from At&t service. So when I got my first MBP I notice that I was loosing wireless connection with both my girls pc laptop and my MBP so i thought it was because I had just switched service, though they send out a service technician and we came to a conclusion that it was the MBP. (I was loosing signal via wireless and ethernet). So we tried to see if both my girls laptop(wireless) and my PC desktop (ethernet) would run into the same issue which it did not.(MBP was turned off)
    So I decided to go my nearest Apple store and let them know what was going on. So I told them what was going on and they said It must be the airport card, and they ended up changing it. When I get home I discover that not only I am having the same issue but other issues too. I went back they ran some diagnostic and they said it was defective and they gave me a new one few days later.
    So in the mean time that I waited for my new one to arrive I used my PC desktop and my girl kept using her laptop and guess what no issue what so ever for one whole week. Now I receive my new MBP(they bumped the specs a little), went home set it up and still the same issue though I dont have the issue when Im using via ethernet. Just a view minutes ago I tried removing the ethernet and using the airport/wireless and within a few minutes I lost the signal.
    I have the gateway 2WIRE model(2701HG-B) modem/router.
    Is there something wrong? what do I have to do to make this work?

    Hi Guys, I bough my Mac almost two years ago. All this time I have experienced the same issue. There are tons of discussions re this issue in the internet. Unfortunately, Apple has done nothing to fix it. I have tried a lot of different options, but they work no longer then 1-2 days. The official fix - does not exist so far. It is quit strange, isn't? I can share my experience: if you go to AirPort Utility - Manual Setup - Wireless and then change Channel, it could help you till the moment you restart your computer; next time you need to repeat it again. It takes 2 minutes. Not sure that it would work for you but you could give it a try. Well, not the best option. Anyway Apple must fix it asap! Hello Apple, do you hear us? Good luck.

  • Loosing internet connection and wireless

    I Intermittently loose internet connection using a wired port and the wireless icons will drop from both of my computer and PS3.
    Some times internet and wireless will come back after a few seconds and other times I have to reset router.  I play a lot of games online on both game systems, I usally loose connection once a night.  Fiance says she looses connection on her laptop 0-3 times during the day.
    Equipment:
    -WRT54G v8 (just updated firmware)
    -Sony laptop w/ built in wireless
    -Desktop w/ linksys wirles card (dont know model #)
    -PS3 running wireless
    -Xbox 360 hard wired

    Reflash the firmware and reset the router for 3 mins in a row.
    hope that helps
    C | EH
    linksyshelp.blogspot.com

  • Why do I loose my wireless connection​?

    Can someone tell me why I loose my wireless connection from my laptop when I go to make a phone call with my phone?
    Solved!
    Go to Solution.

    Your phone is probably on the 2.4Ghz frequency which is the same frequency wireless routers operate on. Try changing the channel on the router to one that is far enough away from the phone's frequency so they don't interfere with each other.
    To change the channel on the router:
     In Internet Explorer, type 192.168.1.1 into the address bar
    On the login page that comes up, type admin for the username and password1 for the password (ignore the dots)
    Click Change Wireless Settings under Quick Links in the My Router column of the front page.
    Under option 3. Channel, select a number from 1 - 11 then click Apply at the bottom of the page.
    Click Apply again to save the changes if it asks.
     It is pretty much trial and error in determining which channel will be furthest from your phone's frequency, and you might even not find a channel that keeps your wireless connection up every time your on the phone. I had the same problem with my own cordless phone and a linksys router that I ended up having to purchase a new phone in the 5.8Ghz range to keep my connection. With that said, I hope you have better luck then me with this situation.
    Brennoko
    Verizon Telecom
    Fiber Solutions Center
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

  • Why am I repeatedly loosing internet connection minutes after connecting to a wireless network?

    Macbook pro retina display repeatedly loosing internet connection while it's connected to a wifi network. It always regains access after turning wifi off and back on, or by selecting another wireless network.
    Already attempted:
    Using another browser
    Turning firewall off

    Just reseted the SMC http://support.apple.com/kb/ht3964, it seems to have worked.

  • My iMac and iPad keep loosing the wireless connection to Airport Extreme issue started after I installed Lion?

    Since installing Lion, I have been loosing my connection to airport Extreme after I have put my IMac in sleep mode.  My Ipad is also loosing the connection.  This issue started since the installation of Lion, is anyone else experiencing the same thing?

    I've had that problem on my macbook running 10.5.8 for a few years. Sometimes it's worse than others. No other computer in my house has this problem.

  • HP Laserjet P1102w wireless connection problem

    Hi, my printer was working well on the wireless connection.  not sure why it stopped. I removed and reinstalled the software.  While in installation and when I am asked to print a test page, it does it successfully on the wireless connection. when I reboot the system I loose the connectivity and the printer is offline.
    I am running windows7x64
    Thanks

    Sounds like the printer is having trouble stabilizing on the network.  Try following the steps in this document to stabalize the printer's wireless connection.  You can also try updating the firmware to improve the connectivity.  Let me know what happens.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Maybe you are looking for

  • WS Policy error while invoking a webservice

    Hi All, I am able to sucessfully invoke a SOA webservice with WS security policy 'oracle/wss_http_token_service_policy' enabled. But when I call a SOA webservice which inturn calls another SOA webservice(with both having the above WS policy), the sec

  • Figuring out how to extract images from a PDF file

    Hi, I'm trying to write a small app that extracts all images from a PDF file. I already wrote a nice parser and it works good but the only problem is that I can't quite figure out from the reference how to decode all images in a PDF file to normal fi

  • IPod passes Apple battery test but only lasts 2hrs during normal use

    I have a 1st generation iPod mini; the battery has been acting up lately. I have done Apple's battery test a few times; each time the battery lasts for 6-8 hrs. However, during normal use, it lasts only 1.5-2hrs, even after a full charge. I have this

  • Speakers no longer working on Mac- weird symbol won't let me change volume

    Hello First off, I am not super computer savy! My mac's internal speakers are no longer working. The volume control has faded in color, and when I try to press the volume buttons on the keyboard, it won't let me change the volume and there is a weird

  • Macbook Pro connected to TV

    To hook my MacbookPro to TV, will i have to get a miniport to DVI adapater and DVI to HDMI? Also, for the sound, will i be able to play it through a pair of external speakers that I have? (Since sounds doesn't come out of miniport, I think)