Lorsque j'applique l'effet "stabilisation de déformation" sur un clip puis que je l'exporte, la vidéo se met à clignoter

Bonjour,
Voici mon problème que je rencontre sur la dernière version de Première Pro avec mon MacBookPro Retina 2014 :
Lorsque j'applique l'effet "stabilisation de déformation" sur un clip puis que je l'exporte, la vidéo se met à clignoter, je rencontre seulement ce problème lorsque j'applique la stabilisation, sinon tout les autres plans ne clignotent pas. J'ai essayé de voir si c'était un problème d'encodage mais le problème ne fait que persisté.
Merci d'avance pour votre aide

Voici la marche à suivre sur Mac :
fichier > réglages du projet > généralités, et sélectionner Logiciel Mercury Playback Engine dans le système de rendu
Ensuite procéder au rendu du projet avec : séquence > rendu de l'entrée à la sortie
Je ne veux pas cracher dans le dos d'Adobe, mais je tiens quand même à préciser que l'aide d'adobe ainsi que le service en ligne n'a pas su me répondre.

Similar Messages

  • Bonjour, lorsque je décoche la case "synchroniser des musiques" dans iTunes, la synchronisation n'a aucun effet et les musiques restents sur mon iPhone, idem pour ce qui est des photos, comment faire ?

    Bonjour, lorsque je décoche la case "synchroniser des musiques" dans iTunes, la synchronisation n'a aucun effet et les musiques restents sur mon iPhone, idem pour ce qui est des photos, comment faire ?

    Merci jmlevy de te pencher sur mon problème.
    Voilà une photo de mon panneau page :
    Puis une autre d'une page qui ne ressemble plus à rien après changement de pagination:
    Voici une ancienne page 28 devenue page 29. Fantastique, non ?
    On peut voir :
    Que mes blocs sont décalés par rapport à la maquette
    que le bloc noir de la page 28 déborde sur la page 29.
    Que mon bloc de texte est perturbé par l'ajout sous-jacent d'une page de maquette
    que ma pagination a conservé les attributs d'une page pair (numérotation à gauche) alors qu'elle est passée impaire.
    J'aurai considéré comme normal que mon ancienne p.28 se soit déplacée en page impaire avec le bloc texte bien placé ET avec les attributs de page (liés au gabarit, tels que pagination, filets, bas de page roulants) modifiés automatiquement. Or il n'en est rien.
    Tu me demandais des éclaircissements par rapport à "J'importe mes gabarits dans le document au fur et à mesure de la construction du livre et je libère les éléments de gabarit afin de pouvoir couler le texte et disposer l'icono. Lorsque c'est fait, je ne retourne pas dans le mode page d'InDesign. J'attaque la page suivante." Voici, plus en détails ce que je fais au moment où je monte une nouvelle page. Mes gabarits ont été  préparé en amont.
    J'ajoute une page au document (ex : une page de texte)
    je lui confère le gabarit qui va avec (ex : C-présentation ch1, cf plus haut)
    je libère les éléments de gabarits pour pouvoir couler le texte et disposer les images.
    quand ma page est finie je recommence l'étape 1.
    Est-ce que c'est à l'étape 3 que je me plante ?
    Est-ce qu'il y aurait d'autres explications à ce malheureux schmilblick ?
    Merci d'avance.

  • Depuis la mise à jour vers la version 5.0.1 lorsque je rentre dans un parking souterrain et que je ne perçois plus d'opérateur puis que je remonte du parking, la recherche automatique d'opérateur n'aboutit plus même après plusieurs minutes ou heures ?

    Depuis la mise à jour vers la version 5.0.1 lorsque je rentre dans un parking souterrain et que je ne perçois plus d'opérateur puis que je remonte du parking, la recherche automatique d'opérateur n'aboutit plus même après plusieurs minutes ou heures ?

    n'ayant pas l'assistance promise par le site d'aide, d'un tchat avec des experts jours et nuits toute la semaine ...
    je continue le sujet ; j'ai fait une nouvelle tentative en désactivant le mode sans échec avant de réinstaller adobe, j'ai supprimé tous les composants adobe possibles et même ceux cachés comme selon le modèle mis à disposition sur le forum par un utilisateur ... je ne sais pas encore si cela fonctionne ; cela fait déjà 12heures que j'y suis, il va me falloir bien 1 heure pour installer un logiciel ; j'espère ... je ferais suivre l'article
    il faut peut être un autre article concernant le tchat permanent d'assistance en ligne inexistant ?
    c'est scandaleux qu'ils envoient les gens télécharger en mode sans échec alors qu'il n'est pas possible de se connecter ; en plus le modèle d'assistance que j'ai eu sur le forum ne convient pas à windows8

  • Bonjour j ai achete un iphone d'occasion avec l'application TomTom europe occidentale seulement il m'est imposssible de sauvegarde l'application sur mon compte itunes que dois je faire ? Suis je obligé de repayé ?

    Bonjour j ai achete un iphone d'occasion avec l'application TomTom europe occidentale seulement il m'est imposssible de sauvegarde l'application sur mon compte itunes que dois je faire ? Suis je obligé de repayé ? Je n'ose pas synchronisé mon iphone avec mon ordinateur de peur de perdre l'application.

    Merci 10000 fois Vincent!
    Enfin apres plusieurs tentatives, ta reponse fut satisfaisante! Ca fonctionne maintenant et j'en suis tres heureuse!
    Quand j'ai créé la variable et que je l'ai "Drag and Drop" sur mon diagamme block, dans les propriétés de celle ci, j'ai suivi tes instructions et j'ai mis le path de la variable créée dans le projet (soit My Computer\test opc.lvlib\Variable1) et j'ai lié mon array de controls a la variable partagée. Je n'ai pas changé les propriétés de mon array de control. Il a toujours l'URL de l'OPC server (soit opc://localhost/APPLICOM.OPCServer.1/CS8.SYMBOLS.WTOOL_LIFE). Je sais que ca fonctionne, mais est-ce réellement la bonne maniere de faire?
    Aussi, je ne comprends toujours pas pourquoi nous devons utiliser des Shared Variables? A quoi servent-elles exactement?
    Merci encore pour ton aide,
    Stéphanie

  • HT1904 Bonjour. j'ai acheté une application en 2012. je ne l'ai plus utilisè et maintenant que j'en ai besoin, j'ai vu qu'on me l'a supprimé. Et on me demande de la racheter à un prix supperieur. Comment dois-je faire?

    j'ai acheté une application en 2012. je ne l'ai plus utilisè et maintenant que j'en ai besoin, j'ai vu qu'on me l'a supprimé. Et on me demande de la racheter à un prix supperieur. Comment dois-je faire?

    If you have the older version you can still use it.
    But you said you deleted the older version, so you do not have much option but to download/purchase the new version.  Unless you can convince the developer to give you the older version again.
    I understand your feelings, but deleting the app puts you in the position of having to purchase the new one...same thing if you had the old version and wanted to update to the new version.

  • How to install MSFT application security updates in cab file format using DISM

    Hi,
    I tried to install security updates for MS Office which are cab files like any other windows security updates cab file. It is giving an error called "file not found". But other windows security updates cab files are installing fine without any error.
    I tried to install these updates manually using DISM on commandline. It is not installing. I even tried using pkgmgr.exe, but that is not working either. I looked at DISM logs which is saying it failed opening the cab file. I tried different other commandline
    options of DISM to install this, but nothing else is suitable for a cab file install.
    Does anyone know how to install a cab file for application security updates via DISM.exe or other MSFT commandline tools?
    Thanks,
    ANSA
    DISM log:
    =======
    2015-02-25 14:42:59, Info                  DISM   PID=4916 Scratch directory set to 'C:\Windows\TEMP\'. - CDISMManager::put_ScratchDir
    2015-02-25 14:42:59, Info                  DISM   PID=4916 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadImageSession
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Failed to get and initialize the PE Provider.  Continuing by assuming that
    it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Manager: PID=4916 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE:
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE:
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Executing command line: "C:\Windows\System32\Dism.exe" /online /add-package /packagepath:"C:\ProgramData\Application
    Data\Autonomic\ANSA Patch Manager\_Installs\mscomctlocx-x-none_8699d53bec82460b948612f4f35d2f6a0ad018f4.cab" /ignorecheck /norestart
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider FolderManager - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider FolderManager - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Manager: PID=4916 Successfully loaded the ImageSession at "C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B"
    - CDISMManager::LoadImageSession
    2015-02-25 14:42:59, Info                  DISM   DISM Image Session: PID=11836 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\OSProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\OSProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM OS Provider: PID=11836 Defaulting SystemPath to C:\ - CDISMOSServiceManager::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM OS Provider: PID=11836 Defaulting Windows folder to C:\Windows - CDISMOSServiceManager::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\LogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\LogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider OSServices - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\PEProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Warning               DISM   DISM Provider Store: PID=11836 Failed to Load the provider: C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\PEProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Failed to get and initialize the PE Provider.  Continuing by assuming that
    it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Manager: PID=4916 Image session successfully loaded from the temporary location: C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B
    - CDISMManager::CreateImageSession
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider OSServices - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Target image information: OS Version=6.1.7601.17592, Image architecture=amd64
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting the collection of providers from an image provider store type. - CDISMProviderStore::GetProviderCollection
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\CbsProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\CbsProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
    2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 CBS is being initialized for online use. More information about CBS actions can
    be located at: %windir%\logs\cbs\cbs.log - CDISMPackageManager::Initialize
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\MsiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\MsiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\IntlProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\IntlProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\DmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\DmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2015-02-25 14:42:59, Info                  DISM   DISM OS Provider: PID=11836 Successfully loaded the hive. - CDISMOSServiceManager::DetermineBootDrive
    2015-02-25 14:42:59, Info                  DISM   DISM Driver Manager: PID=11836 Further logs for driver related operations can be found in the target operating
    system at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\UnattendProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\UnattendProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\SmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\SmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\TransmogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\TransmogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISM Unattend Manager - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: OSServices
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: MsiManager
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: MsiManager.
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: IntlManager
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: IntlManager.
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DriverManager
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DriverManager.
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: SmiManager
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Edition Manager
    2015-02-25 14:42:59, Info                  DISM   DISM Transmog Provider: PID=11836 Current image session is [ONLINE] - CTransmogManager::GetMode
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Processing the top level command token(add-package). - CPackageManagerCLIHandler::Private_ValidateCmdLine
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Encountered the option "packagepath" with value "C:\ProgramData\Application
    Data\Autonomic\ANSA Patch Manager\_Installs\mscomctlocx-x-none_8699d53bec82460b948612f4f35d2f6a0ad018f4.cab" - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
    2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed opening package. - CDISMPackageManager::Internal_CreatePackageByPath(hr:0x80070002)
    2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed to get the underlying CBS package. - CDISMPackageManager::OpenPackageByPath(hr:0x80070002)
    2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed to open the package at location: "C:\ProgramData\Application Data\Autonomic\ANSA
    Patch Manager\_Installs\mscomctlocx-x-none_8699d53bec82460b948612f4f35d2f6a0ad018f4.cab" - CPackageManagerCLIHandler::ProcessPackagePath(hr:0x80070002)
    2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed while processing command add-package. - CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x80070002)
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Further logs for online package and feature related operations can be found at
    %WINDIR%\logs\CBS\cbs.log - CPackageManagerCLIHandler::ExecuteCmdLine
    2015-02-25 14:42:59, Error                 DISM   DISM.EXE: DISM Package Manager processed the command line but failed. HRESULT=80070002
    2015-02-25 14:42:59, Info                  DISM   DISM Image Session: PID=11836 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(DISM Package Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Finalizing CBS core. - CDISMPackageManager::Finalize
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: DISM Package Manager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found the OSServices.  Waiting to finalize it until all other providers are
    unloaded. - CDISMProviderStore::Final_OnDisconnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(MsiManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: MsiManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(IntlManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: IntlManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found the PE Provider.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(DriverManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: DriverManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(DISM Unattend Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: DISM Unattend Manager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found the OSServices.  Waiting to finalize it until all other providers are
    unloaded. - CDISMProviderStore::Final_OnDisconnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(SmiManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: SmiManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(Edition Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: Edition Manager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Releasing the local reference to OSServices. - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: OSServices - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:43:00, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
    2015-02-25 14:43:00, Info                  DISM   DISM.EXE:
    2015-02-25 14:43:00, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
    2015-02-25 14:43:00, Info                  DISM   DISM.EXE:
    2015-02-25 14:43:00, Info                  DISM   DISM Image Session: PID=4916 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect
    2015-02-25 14:43:00, Info                  DISM   DISM Provider Store: PID=4916 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:43:00, Info                  DISM   DISM Provider Store: PID=4916 Found the OSServices.  Waiting to finalize it until all other providers are
    unloaded. - CDISMProviderStore::Final_OnDisconnect
    2015-02-25 14:43:00, Info                  DISM   DISM Provider Store: PID=4916 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider

    You need to extract and install it - Refer this link
    http://blogs.technet.com/b/askcore/archive/2011/02/15/how-to-use-dism-to-install-a-hotfix-from-within-windows.aspx
    Regards Chen V [MCTS SharePoint 2010]

  • Lorsque je transfère des photos de mon appareil photo sur mon mac et que je clique sur une photo pour l'avoir en plein écran j'obtiens un écran gris avec un grand point d'exclamation. Je ne sais pas comment résoudre ce problème (de paramétrage ?)

    Lorsque je transfère des photos de mon apparil photos vers mon mac et que je clique sur une des photos pour l'avoir en plein écran j'obtiens un écran gris avec un point d'exclamation que puis-je faire ? est-ce un problème de paramétrage ce qui est bizarre c'est qu'il y a qq semaines je n'avais pas ce genre de problème.

    Google translation:
    When I transfer photos from my apparil photos to my mac and I click on a picture to get it full screen I get a gray screen with an exclamation point, what can I do? Is this a problem setting which is weird is that there qq weeks I did not have this kind of problem.
    That is an indication that iPhoto has broken the link/file path to the orignal photo.  So make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and  apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Application Manager in partial service, date format exception

    Hi; I was pulling MIVR logs as I see the Application Manager is in partial service.  I see an exception of formating the date, but I'm not sure where to go to correct it or if that is even the right thing to focus on.  Kind of new to looking at these logs and they seem pretty daunting.  I took them righter after an Engine Restart, which usually fixes this partial service issue yet it still is quite large.
    Any ideas?

    Hi,
    The application manager in partial Service can be due to one of the following:
    1. An application is referencing a script that was deleted from the script management causing the application to be invalid.
    2. The script in itself is invalid.
    When we have a system with multiple applications, it becomes really hard to find out the culprit application without the logs.
    For this, the easiest way would be to login to Cisco Unified CCX Administration -- Tools -- Real Time Reporting.
    Click on First tab and go to Applications.
    It will show all the applications and then flag it as Valid -- True on the last column. If this is False, then we can proceed with checking that application.
    Note: RTR is a tool highly dependent on JAVA. Check the JAVA version on CCX compatibility matrix and use the same. Else use IE with compatibility mode turned on for viewing this tool,
    Regards,
    Arundeep

  • Depuis la derniere mise a jour de itunes je ne peux plus lancer l'application. J'ai un message d'erreur " impossible de démarrer le programme car il manque MSVCR80 sur votre ordinateur" ainsi que le message "error 7 windows 126" Merci de votre aide

    Bonjour depuis la derniere mise à jour d'itunes je ne peux plus lancer l'application
    J'ai plusieurs messages d'erreur " Itunes was not installed correctly error 7 windows 126"
    Je suis sous windows 7.
    Merci de votre aide

    See TS5376: iTunes 11.1.4 pour Windows : installation ou ouverture impossible and Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Lion ne prend plus en compte les applications power PC (acdc, adobe , mac office etc...) que faire?

    ce n'est qu'après avoir acheté et téléchargé Lion que l'on s'perçoit que ce logiciel "ne prend plus en charge lse applications power pc"
    1. c'est mahonnête de ne pas prévenir les clients
    2. que faire pour pouvoir continuer à utiliser ACDC, Adobe photo shop, Mac office etc...?
    3 Si impossible comment réinstaller snow léopard... et calmer ma comère!

    Si ce sont les programmes que vous avez besoin, il sera préférable de revenir à l'utilisation de Mac OS X 10.6 (SnowLeapord) jusqu'à ce que vous pouvez trouver un programme de remplacement qui fonctionnera sous Lion.

  • Adobe Application Manager et la barre des menus sur Mac

    Bonjour,
    il y a quelques jours, j'ai téléchargé les versions démo Mac de différents logiciels (Ps, AI, Id, Dw et Ae). Adobe Application Manager s'est bien évidemment installé, et a ajouté dans ma barre des menus une icone. J'ai voulu la supprimer, j'ai donc regardé dans les préférences système mais je n'ai rien vu de tel. J'ai donc essayé de désinstaller AAM, mais l'icone est quand même restée...
    Je ne sais plus quoi faire...
    Merci d'avance de votre aide !
    Johan

    Bonjour !
    Merci de votre réponse. Mais malheureusement, comme un bourrin j'ai viré AAM... Donc je ne peux faire les màj... :S
    D'ailleurs, ces màj nous forcent elles à passer à Cc ? Car si j'achète je préfererais avoir tout et ne pas devoir être abonné !;)
    Encore merci, Johan

  • Application icon must be in .icns format.

    Newbie here. I have managed to build an app. I find that if i want a custom icon for my app. It must be in .icns format. I have also downloaded icons for use. These are not in icns format. Can't i use them for my apps ? Puzzled as to what is the differerence. Can I convert my normal icons into icns for use ?

    Hi Pod Guy
    There's a neat app called Img2icns from http://www.img2icnsapp.com/ which will create icns files for you given any graphics source.
    Bob

  • Is there Windows application to convert PDF to Keynote format?

    I want to convert power point files so they can be viewed on the ipad.  There are Mac pdf to Keynote converters avaialble, but I want to be able to convert my power points on my PC to key note format and then email or itune sync them to my ipad for use in Keynote on the iPad.
    Any suggestions?

    You can use any office suite or reader software that you want to read Powerpoint files. There is no conversion necessary.
    If you just want to present a Powerpoint, you may want to use Goodreader or Readdledocs. (I use and like Goodreader.)
    If you want to edit Powerpoint, the choices become more complex.
    Quickoffice Connect Mobile Suite has a less full-featured word processor, but can supposedly edit Powerpoint (particularly graphics) rather well.
    Documents to Go is known for its Intact technology meaning even if it can't allow you to edit something, it stays in the document. Pages, Keynote, and Numbers now have similar things, and the Apple options have excellent feature support.
    --Sam

  • Rotation des applications sur iPHONE à l'identique que le iPAD.

    Ceci est bien plus convivial en vue panoramique sur un support voiture .
    Utilisation du GPS Manipulation de la musique etc... Une évidence!!!

    Avez vous un mac ou un ordinateur Windows normal?
    Désolé mon français est rouillé!

  • Je n'arrive pas à supprimer les fichiers de l'application Tunnelblick ?

    Bonjour,
    j'ai différents fichiers Tunnelblick.app dans ma corbeille et impossible des les supprimer !!
    ça me dit "Impossible d’effectuer l’opération car vous ne disposez pas des autorisations requises pour accéder à certains éléments."
    S'il y a des experts car j'ai tout essayer merci

    (Google Translate de l'anglais, qui apparaît ci-dessous):
    Tout d'abord, mettre le Tunnelblick.app retour dans / Applications. (Ouvrez la Corbeille, cliquez-droit sur Tunnelblick.app, puis sélectionnez "Mettre Retour"). Puis désinstallez Tunnelblick.
    Pour désinstaller Tunnelblick - de l'enlever complètement - suivez les instructions à
    https://translate.googleusercontent.com/translate_c?depth=1&hl=en&rurl=translate .google.com&sl=en&tl=fr&u=https://code.google.com/p/tunnelblick/wiki/cInstall&us g=ALkJrhhCFrOWMBNSrEXLUAETO1A_KrFz4A#Uninstalling_Tunnelblick
    First, put the Tunnelblick.app back in /Applications. (Open the Trash, right-click Tunnelblick.app, then select "Put Back"). Then uninstall Tunnelblick.
    To uninstall Tunnelblick -- to remove it completely -- follow the directions at
    https://code.google.com/p/tunnelblick/wiki/cInstall#Uninstalling_Tunnelblick

Maybe you are looking for

  • ORA-00980: synonym translation is no longer valid

    Hi I get the following error when try to insert xml SQL> ed Wrote file afiedt.buf 1 insert into "bulkCmConfigDataFile_TAB" 2 values( 3 XDB_UTILITIES.getXMLFromFile('Test.xml','DATA_DIR'). 4 createSchemaBasedXML('http://127.0.0.1:8081/public/xsds/conf

  • Javascript code to retrieve metadata - must run twice to work

    Hi all This is frustrating the hell out of me. I've got a script to batch add headers/footers (via watermarks) to a range of pdf documents by using the respective document's metadata (title, subject). Checked everything: Script running ok, metadata a

  • Looking for ADF Part for HPc7280

    Would anyone know where I could still retrieve a part in excellent condition for my older all in one printer HPc7280. I believe the part # is CC564-60003. The printer is still in excellent condition except for the ADF (automatic document feeder) whic

  • Just switched from pc to mac and need to install Lightroom 4.  Can't seem to find the link on Adobe website.

    I purchased Lightroom 4 a couple years ago for my pc.  I just purchased a Mac over the weekend and would like to install Lightroom 4 on my new computer, but can't seem to find the link on the Adobe website.  I'm trying to avoid having to purchase the

  • Why pictures sizes in the iweb blog are so big?

    I just realized that when I update my blog (iweb 1.1.2) the pic (jpeg, 2.2MB) in the blog are converted into a small .png picture (70 KB) which would be fine as the blog doesn't need a hi quality pic but the .jpg pic is also downloaded ! Example : I