Lorsque je joue au backgammon masters il y a une anomalie qui m'est signalée par:"Votre version de Macromedia Flash ActiveX Control n'est pas compatible avec cette version de Windows "
J'arrive a jouer mais la fenêtre du jeu est trop petite et je ne peux pas l'agrandir que faire? je suis nulle en informatique.
J'ai trouvé la solution dans la documentation en
englais. Après l'avoir essayer, ça fonctionne.
Alors voici je joins le code: attach code à ce document.
C'est un pas à pas. En espérant que cela peut
aider d'autres personnes.
À une prochaine !
Nurse 1
Similar Messages
-
My version of Macromedia Flash ActiveX Control isn't compatible with my version of Windows
I am trying to use a new copy of Camtasia Studio 3, and I keep gettiong the error message that my version of Macromedia Flash ActiveX Control isn't compatible with my version of Windows and that I should ocntact Adobe for support. So here I am.
I am running Windows7 64bit, and it's a brand new computer so I know that there aren't tons of legacy installations or Flash players on it. This page http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html tells me that I have Flash Player version 11.4.31.110 installed but that I should have 11.4.402.287 installed. But I have installed the latest Flash player from the Adobe site (twice!) and it never gives me an option for 11.4.31.110 vs 11.4.402.287.
I am using Chrome and Flash is working fine in my browser: It's only Camtasia that isn't working well.
Thanks!Hm, I assume you mean Camtasia Studio 8?
Check the chart on the page you linked. You'll see that the version you have installed is in fact the latest version for Chrome. They haven't updated it beyond that. Each browser engine has its own latest version of flash. IE and Mozilla are 11.4.402.287.
Aside that, there's no reason Camtasia should be requiring you to have that version of flash. Make sure when you're publishing your content that you don't check off any options to "require the user to have the latest version of Flash". You should also (if possible in your project) try to target MP4/HTML5. Check any HTML being generated with it (hopefully using SWFObject) and check for the version checking code. There is absolutely nothing Camtasia needs to require the latest version to do. I've been using Camtasia (TechSmith codec mostly) for screen recording since version 2. -
My Macromedia Flash ActiveX Control isn't compatible with Windows 7 / 64bit
I have downloaded the newest version of Adobe flash, and it installs like normal...and I think it is working fine....but on some sites (even You Tube) and some software programs, I get this message:
Your version of Macromedia Flash ActiveX Control isn't compatible with this version of Windows.
I am tired of wasting so much time with this...I read on the net that some people compiled their computer to 86...whatever that means....but no one explained how to do it.
I have a Flash professional in ADOBE MASTER COLLECTION C6 / but all programs and sites default to the normal Flash player (that constantly gets updated,I have a similar problem, Win 7 64-bit, I did a clean install*, downloaded latests (Adobe - Install Adobe Flash Player), and after restarting my computer, Win7 64-bit Action Center popped up: "Your version of Macromedia Flash ActiveX Control isn't compatible with this version of Windows" with no error codes to look up knowledge base. Like seriously, no one from Adobe answered this in 9 months?! And the steps in Common problems | Flash Player sound like I need to purchase support before I file a report?
Currently, my Firefox plugins only show Shockwave Flash 13 not Adobe Flash. Do I need to install Flash plugin for Firefox? (http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe)
Thanks!
* as per How do I do a clean install of Flash Player?:
1. Add or Remove programs ... Flash ... uninstall,
2. deleted all files & folders in C:\Windows\system32\Macromed\Flash, C:\Windows\SysWOW64\Macromed\Flash, %appdata%\Adobe\Flash Player, %appdata%\Macromedia\Flash Player),
3. verified that the files “FlashPlayerCPLApp.cpl”, "FlashPlayerApp.exe", and "FlashPlayerInstaller.exe" in C:\Windows\system32\ (for 32-bit systems) or C:\Windows\SysWOW64\ (64-bit system) were deleted,
4. prepared to use Unlocker http://www.emptyloop.com/unlocker/ if any files couldn't be deleted, -
Bonjour,
J'ai téléchargé sur mon MAC le mois passé la version gratuite de 30 jours d'Adobe Premiere Elements 12. Avec cette version, j'ai pu créer plusieurs extraits vidéos pour mon assistanat de recherche à l'école.
Maintenant, la version d'essai a expiré et une bande (avec les mots: Création avec la version d'essai d'Adobe Premiere Elements) apparaît à chaque fois que je fais jouer l'un de mes extraits vidéos. Je ne pourrai pas me servir de ces extraits si cette bande ne disparaît pas... et je ne veux pas recommencer tout mon travail! Pourtant, lorsque j'utilisais la version d'essai, aucune bande n'apparaissait lorsque je faisais jouer les extraits....
Ma question est donc la suivante: Si j'achète la version Adobe Premiere Elements 13... y a-t-il ainsi une chance que cette bande disparaisse et que je puisse à nouveau me servir de mes extraits?
MERCI!saramv
I do not believe your question has been answered if you are inquiring about how to remove the Adobe watermark from video that you have exported from the Premiere Elements tryout.
You cannot remove the Adobe watermark from exports from the tryout, be the export a file saved to the computer hard drive or a burn to disc. Does not matter if you purchase the product later.
You can remove the Adobe watermark from a project file (project.prel) from the tryout Premiere Elements after you purchase the program.
When you open a project.file (project.prel) from the tryout Premiere Elements in the purchased product, there are two possibilities for removing the Adobe watermark from that project file...
a. Go to Timeline Menu/Delete Rendered Files...click on that.
or
b. Let the purchased program do it for you automatically...some of us have found this to be the case.
Please see which one works for you.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR -
In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?
Yes, junker thumb drives pour like rain in the market.
Which makes are working on your Air, and which arent?
Stick to Sandisk and a couple of other reliable mfg. of memory sticks -
Hello,
I have Windows 8, 64bit and Office 2010
I am trying to get the 'datepicker' (MonthView) ActiveX control toolbox in Excel 2010 as part of a Excel UserForm I have created. I have spent all day trying to find a solution for my problem.
I opened up the 'more.. ' but the MonthView/datepicker/calendar control is not listed.
I referred to some articles and confirmed that I do indeed have the mscomct2.ocx file in the C:\Windows\syswow64 folder.
I followed the instructions as above, opening up the Administrator Command Prompt and changed the directory to C:\Windows\syswow64 and typed in RegSvr32.
I received a popup screen confirming my registration was successful
Excel was closed. So I opened Excel and checked out the ActiveX Tool box and clicked on the 'More Controls', but there was no listing for the Microsoft MonthView control, (nor datepicker/calendar)
I then downloaded the latest Windows Common Controls 2 6.0 from the following site
http://support.microsoft.com/kb/297381
Copied the original file (2008) and saved it elsewhere on the computer for safekeeping.
Extracted the new mscomct2.ocx.
Under the C:\Windows\syswow64 I changed the original file properties to allow me to overwrite it with the new file. This worked … old file replaced.
I then registered the new file via the Administrator Command Prompt (as above) and was notified that it was successful. I rebooted pc and went back into Excel to find the MonthView in the
ActiveX toolbox, More Controls… and it still wasn’t there …
I would be very grateful if someone could advise how I can get this control and allow me to use it.
If I have left out any information that you need to resolve this issue, please advise.
Cheers,
TheShyButterfly
Hope you have a terrific day, theShyButterflyHi George,
Thank you for checking this out ... :)
I am using Office 2010 64 bit ...
I found the
mscomct2.ocx file originally within the C:\Windows\syswow64 directory (this was an original file .... which I expect was installed via Microsoft at the time of the Office installation.
As I mentioned above, I followed
the instructions (same as the ones you suggested), but still no go, even though it stated that the registration was successful ! :(
Why weren't these features included in the 64 bit ? ... yes, I read the article ... but ... so MS doesn't think that people/developers would be needing this in due course? I installed the 64bit version because I'm running the Win8 64bit version ...and
I deal with a lot of large spreadsheets and can't afford to sleep whilst they decide to load.
If MS included all the other ActiveX controls and some obscure ones, surely some bright spark could have thought that something as useful as MonthView should be included as 'basic' necessity when dealing with forms and sheets?
Perhaps you could pass the suggestion up the line .... there are a lot of other people out there having the same problem ... I found heaps when I was looking for a solution.
Sorry, I'm not having a go at you, but just incredibly frustrated .... the amount of lost productivity directly cause by trying to find a solution that doesn't exist ... it's been at least a good solid 24 hours.
But thank you for taking the time to review my post and your suggestion. It's unfortunate that because you are part of the organisation ... you tend to cop some slack from frustrated people like myself.
In relation to the pictures/screen dumps, 2 of them made it (I can see them in my post) ... one I deliberately left out because there was nothing on there that showed anything other than the rest of the 'More Controls' - nothing to do with the MonthView.
Please feel free to escalate this to the powers that be ... and hopefully enough people will join the voice so a change can be made (I can dream ... can't I?)
I've taken a screen dump of the Forms/ActiveX toolbox.
I don't know what the next step is ... I guess you'd be able to advise.
Cheers,
TheShyButterfly
Hope you have a terrific day, theShyButterfly -
The latest version of iTunes does not allow me to open a playlist in a separate window. I need this feature. Is there another way? You used to be able to double click a playlist and have it appear in a new window.
Others have commented on this too. It seems to be one of the 'improvements' of the newer version you are supposed to embrace with joy as an exciting new development. You can send feedback to Apple but realize you may be perceived as standing in the path of progress.
http://www.apple.com/feedback/itunesapp.html -
How can I script a Flash .exe file to always stay on top of all other windows?
Hi All,
I'm new to action script, and I just need this one script
> How can I script a Flash .exe file to always stay on top of
all other windows?
Basically what i want to do is have a flash-created
step-by-step instructional movie, but for the movie to remain on
top of all windows so the instructee is able to follow the
instructions on-screen...
It would be preferable to not have to buy another product
just to do this... as I said, this is the only scripting I need.
Thanks in advance
Cheers
Rickif you create your exe with mProjector you can use one of its
new AS
commands to do this.
setZOrder
http://www.screentime.com/software/mprojector/docs/mWin_setZOrder.htm
all APIS
http://www.screentime.com/software/mprojector/docs/index.html
Demo
http://www.screentime.com/software/mprojector/demo.html
mProjector installs new classes and help into Flash, to
enable them you
must build your app with mProjector (its input is your swf)
John Pattenden
Screentime Media - Flash Tools since 1997
http://www.screentime.com -
hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?
If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll. -
I downloaded a film from ITunes in HD and had problems, I upgraded to the latest version of ITunes and have then downloaded the film again in SD on my Windows 7 computer, but I still can't get the film to play, any idea's what to do next?
I've been working at the same problem for hours now and it's really driving me crazy so any help would be greatly appreciated.It is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
Error with Windows Media Player ActiveX control
When I try to drop in a Windows Media Player control I get an error:
"Error loading type library/DLL"
Any ideas?If upgrading is out of question. Like a budget stopping it. You could try to this http://www.microsoft.com/download/en/details.aspx?id=8002 That will allow you to run XP inside windows 7. It is also other media players like VLC and Apple quick time that have ActiveX controllers. I have tested the Quicktime version and it is quite good.
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far) -
Which version of Adobe Flash Player is most compatible with Windows Vista Business SP2
Which version of Adobe Flash Player is most compatible with Windows Vista Business SP2
The latest version (11.7) is compatible with Windows XP, Vista, 7 and 8.
-
Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools > Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64-bit.
Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
Hi,
I've searched everywhere I can think of for a solution to this problem with no success. I see other people have reported similar issues and these have not yet been resolved.
I have installed Windows 7 32 bit on a new Mac Mini under Bootcamp. When I go to install the Bootcamp drivers in Windows, I get the message "the version of this file is not compatible with the version of windows you are running".
Other people have reported this issue when trying to install 3rd party software on a 64 bit version of windows but I'm simply trying to install the Bootcamp drivers on a 32 bit version of Windows.
Is it possible the Mac Mini needs a 64 bit version of Windows installed under Bootcamp? I haven't seen this requirement mentioned anywhere.
Appreciated all and any help that can be offered.Welcome to the Apple Support Communities
That's because the Late 2012 iMac and Mac mini only supports the 64-bit Windows 7 version, so the drivers you downloaded are designed to work with the 64-bit version and you can't install them on a 32-bit version. Install the 64-bit Windows 7 on your computer -
I must run a 32-bit programe on a windows 64-bit operating sistem, and i receive this message:"The version of this file is not compatible with the version of Windows you're running.[...]". I tried with Troubleshoot compatibility - didn't
work. I tried set to run in compatibility mode for Windows XP in file properties window and it didn't work. What can I do more? I
must run this programe to acces my database.Hello qqnicol,
What program do you run?
Please contact the software provider to confirm if this 32-bit program can run in 64-bit Windows.
As some programs can only run in specific version of Windows, please download the right version of software.
Most programs designed for the 32-bit version of Windows will work on the 64-bit version of Windows. Notable exceptions are many antivirus programs.
Device drivers designed for the 32-bit version of Windows don't work on computers running a 64-bit version of Windows too.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support
Maybe you are looking for
-
Don't want to use new Numbers, but 'get info' fix doesn't work
Hi All, I made the mistake of installing the new Numbers a month or two ago. I don't want to use the new Numbers because I need to work on the same documents on older machines that won't work with the new Numbers. On my machines with both versions of
-
Using Acobat Pro for PC with Mac
I am just migrating from pc use for the padt two decades to a mac and I am trying to reduce the new software purchase. Does "Adobe Acrobat 9 Pro Windows" work on a Mac (in the Mac environment)?
-
Error with data source and jndi
Dave, I am using weblogic 6.1 now and I am still getting the same problem. Error: The DataSource name with the JNDI name: Organization can not be located. Please ensure that the DataSource has been deployed successfully and that the JNDI name in your
-
Very very urgent - foreign curency valuation
Hi when i am not assigning the cost centre to vendor in FB 60 then the foreign currency valuation is working properly. but when i assigned the cost centre then i am getting following error Posting for general ledger account 15201001 amount
-
Why can't I get a key for the Office Consumer Technical Preview now?
So.. I tried for many times to get a key for my new office 16 technical preview but failed all the times. Now the office on my PC is running out of time. So I cannot use it now. How could I get a key to let it work?