LOS - Business content cube

Hi Guys,
When we are extracting data from LOS for ex, 2lis_12_vaitm, 2lis_12_scl or others. some times we are not using the SAP business content cubes. We are creating our own cubes by using the standard LOS.
Can some one please give a clear explnation of some examples which LOS DS and why we have gone for other then business content cube.
If you have any document please post here or send me to this mail [email protected]
Bye...
Sankar Reddy

hi
If we want more additional fields to be added to the cube, or the fields in the cube is no longer relevant for our analysis we decide for custom cubes
In that case, we modify the datasources and extract data to accomadate in cubes
Hope this helps
Assign points if useful
Regards
N Ganesh

Similar Messages

How to install the Business Content Cube 0PP_C02

Hello,
Can you please explain me how to install the Business Content Cube 0PP_C02 .
What are the nesessary steps involved in this process. How this Standard Cube is available in
AWB -> Modeling.
What are the nesessary steps involved in the R/3 side.
CAn you please help me in this.
Thanks alot.
Regards,
Anitha

Hi anitha
TRy this
To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
The following figure displays the DataSources in an overview according to the application component.
       2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
The DataSources lying under the subtree and other subtrees are selected.
       3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
       4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
       5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
If an error occurs, the error log appears.
Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
       6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
this will solve ur issue..
Prasanna

Is it possible to delete data selectively from Business content cubes

Dear Experts,
         Requesting you to help me out to know, is it possible to delete data selectively from Business content cubes.
When I'm trying to delete selectively from Business content cubes, the background job gets cancelled with ST22 logs stating
A RAISE statement in the program "SAPLRSDRD" raised the exception condition "X_MESSAGE".
Since the exception was not intercepted by a superior program, processing was terminated.
and i tried with few more Technical content cubes but the same thing happens.
Pls let me know how to selectively delete data from Business content cubes if it's possible?.
Thanks in advance for your favorable assistance.
Regards,
Ramesh-Kumar.

Hi Ramesh,
Follow below steps for selective deletion:
1.     Transaction code: Use the Transaction code DELETE_FACTS.
2.     Generate selective deletion program:
A report program will be generated of the given name, here .
3.     Selection screen:
Take the deletion program u201CZDEL_EPBGu201D to the transaction code SE38 to see/execute the program.
After executing it will take you to a selection screen:
As we need to carry out deletion selective on Calendar week, we need to get the screen field for the field Calendar week. For this, click on the Calendar week field and press F1.
Click on the technical information button (marked in red box above) you will get below screen:
     ABAP program to carry out the Calendar week calculation
Problem scenario: As stated earlier the requirement is to delete the data from the cube based on the calendar week. Thus a code must be developed such that the number of weeks should be taken as input and corresponding calendar week should be determined. This calendar week should be then passed to the deletion program in order to carry out the data deletion from the InfoCube.
     Transaction code: Use T-code SE38 in order to create a program.
Logic: Suppose we need to delete the data older than 100 weeks.
a.     Get the number of weeks and system date in variables and calculate the total number of days :
lv_week = 100.      *number of weeks
lv_dte = sy-datum.     *system date
v_totaldays = lv_week * 7.      *total days
b.     Get the corresponding calendar day from the total days. This is obtained by simply subtracting the total no. of days from the system date.
lv_calday = lv_dte - v_totaldays. *corresponding calday.
c.     Now in order to get the calendar week corresponding to the calculated calendar day we must call a function module 'DATE_TO_PERIOD_CONVERT'. This function module takes input as Calendar day and Fiscal year variant and returns the appropriate fiscal period.
Get the sales week time elements
call function 'DATE_TO_PERIOD_CONVERT'
    exporting
      i_date                      = lv_calday
      i_periv                     = lc_sales
    importing
      e_buper                     = lv_period
      e_gjahr                     = lv_year
    exceptions
      input_false                 = 1
      t009_notfound               = 2
      t009b_notfound              = 3.
if sy-subrc = 0.
    ls_time-calweek(4)      = lv_year.
    ls_time-calweek+4(2)    = lv_period.
endif.
v_week = ls_boots_time-calweek.
Note: We can pass the fiscal year variant which can be obtained from the table T009B.For e.g. here fiscal year variant lc_sales = Z2. LS_TIME will be any table with suitable time units.
d.     Now we have obtained the required calendar week in the v_week variable. This calendar week is the week till which we need to keep the data. And older data than this week will be deleted. This deletion will be done by the deletion program
Submitting the Data deletion program for ZEPBGC01 and key field
SUBMIT ZDEL_EPBG WITH C039 LT v_week.
          Here the calendar week value is submitted to the deletion program ZDEL_EPBG with the screen field of calendar week.
Hope ... this will help you..
Thanks,
Jitendra

Urgent Help on Business Content Cubes!

Hi Experts,
Could any one help me on the below requirement please?
We need to provide an estimate to the customer about the below.
SAP PM/ Customer Service:
-Sales inquiry and sales contract (Including Billing Plan)
-Service Notifications and Orders (including Refurbishment)
-Graphical resource (Personnel/Contractor) allocation
-Timesheet and Resource Related Billing
-Service Order related Purchasing
-Planned/Cyclical Maintenance
We have to find whether there are any business Content Cubes available for the above?
Could any one have the idea which Business content cubes can be used for the above and give me some explanation pleaseeeeeee!
Waiting for your valuable inputs...
Many Thanks in advance..
Regards,
BH

Varma,
This is the URL for the BW 3.5 Business Content, you can check here:
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
Here's for BI 7.0:
http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Good luck!
Luis

Where can we find Business content Cubes,DSo,Reports for CS,PM,Treasury Man

Hi
Where can we find Business content Cubes,DSO,Reports for CS,PM,Treasury Management modules in help.sap.com. I searched in help.sap.com.But i haven't get exact link in the site. I haven't have access for the BI system.Can any list out the cubes ,DSO's,report that are in Business content for the above modules or give me the help.sap.com links, so that i can go through on it. It is for BI 7.O.
Does is there any differences in Business content objects for SAP BW 3.5 and SAP BI 7.0.
Thanks&regards
Revathi

You can find the businee contect in SAP Network Libraray
http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
where you will find all the information.
Business content is no differnce between in 3,5 or 7.0..may add few more

Is it possible to create a copy cube from business content cube

Dear Experts,
I have to create the new cubes which is a copy of Business content statistics cubes .
Request you to let me know how can i create a copy cube from Business content cube. My doubt is,weather is't the same as normal customized cube creation by giving copy from option.....
Thanks in advance for your valuable assistance.
Regards,
Ramesh - Kumar.

for copying the cube whose copy is to be made should be available in infoprovider tab in modelling of RSA1.
first you have to install the business content cube ,so that it is found in the Info-providers tab in modelling .
for that,first go to business content option found in the modelling tab of t-code RSA1 .
find the cube and transfer it to the right and execute . It will be available in infoprovider tab of modelling .
then you can create a copy as we do normally .

How to find the business content cubes..

Hi bw guru's,
how to find the standard cubes and how to map the fields for our reuirements..can any one help me ..in this scenario..
thanx in advance..
uma reddy

uma,
help.sap.com is a reasonably good source of information on available business content. For example, here is an overview of BC for NW2004s:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
As you drill down you can often (but not always) find information on how the BI infoobjects map back to source system tables/fields. For instance, this link shows this information for sales order header information under NW2004s:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3c/63073c52619459e10000000a114084/frameset.htm
As you navigate you'll want to take care that you're looking at information related your system version and business content level.
Hope this helps.
Bob

How to identify the best match Business Content CUBEs

Hi Experts
I got the reporting requirments from the user...
How can i identify is there any suitable business content bw objects (Data Source,DSO,Cube..etc) avaliable that i can use to meet the requirment or
alteast find a nearst match so that i can enhance
Please advise me how to start
Thanks

Hi,
Once you collected requirements then you can take a look at the business content site for the datasources or cubes etc.which fit with your requirements.If you tell your requirements then we can suggest you what to use or you can start taking a look at the link below.
http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Regards.

DATASOURCES TO A BUSINESS CONTENT CUBE

Hi,
i have to take the following datasources into a CUBE:
1. 2LIS_03_BF
2. 0CO_PC_ACT_05
3. 0CO_OM_CCA_09
4. 0FI_GL_4
5. 2LIS_02_ITM
I was wondering which Standard Cube in BI would be most suitable for this development?
Thanks

I mean that when activating Business Content, you can activate only cubes or only ODS, so exactly what you need. But you can also activate all the objects in the dataflow (ie from the DS ni BW to the queries through the ODs, cubes, etc...)
After Image means that you get the latest value of your information, so if you put that in a cube, the system will agreggate the old and the new value...
Have you taken BW310 course ? How long have you been working with BW ?
PYG

Business Content Cube for Service Management

My organization relies very heavily upon service orders and, as such, would like to create implement a SM (service management) cube.
We don't have CRM. Does anyone know of any business content SM cubes? I can't seem to find any.
Many Thanks!

Hello,
Please go through the LO Extraction datasouorces of Customer Service BW ( 2LIS_18_* ).
This will be definately helpful.
Regards,
Prafulla

Loading Business Content cubes

Hi
I am new to BW area, and am posting a basic question, Once the Cube is activated from Business content what are the steps to Load data into the infocube and how to identify the right info sources for that cube, can any one please explain?

daniel,
the business content from BW already prescribes certain infosources for infocubes (via update rules assigned to them).
once you have identified which datasources are prescribed by business content activation, you should activate the datasources related to these infosources. replicate the datasources in the source system, then activate the transfer rules in BW. then create an infopackage under the infosources and schedule the extraction.
you could also go look around in the forums since this has already been discussed in great detail. =)
hope this helps, and spread the love (by rewarding points). =)
ryan.

Business content cubes . Please help me in identification

Hello ,
I am still looking out below information , I tried to find the same in help.sap.com but could not identify the cube from business content . can u please help and let me know which could be the cubes or multiprovider from business content .
Could you please help me and let me know the cubes which are provided by SAP .
1.    Invoices for analysis of actual sales, pricing and special charges (2 standard cubes)
2.    Analysis of Delivery processing (incl. analysis of distribution costs) (2 standard cubes)
3.   Sales Orders for analysis of incoming sales orders, open orders, backlog (4 standard cubes)
4.    Inventory, for analysis of inventory levels, turnover and slow stock (1 standard cube)
5..   Purchase Orders for analysis of purchase orders, open purchase orders (5 standard cubes)
Thanks .

Hi,
1. Invoices for analysis of actual sales, pricing and special charges (2 standard cubes)
    0SD_C03 And also check for 0SD_C*
2. Analysis of Delivery processing (incl. analysis of distribution costs) (2 standard cubes)
   Use DS -->2LIS_12_VCITM and create a Custome Cube for that DataSource
3. Sales Orders for analysis of incoming sales orders, open orders, backlog (4 standard cubes)
    0SD_C03 And also check for 0SD_C*
4. Inventory, for analysis of inventory levels, turnover and slow stock (1 standard cube)
   0IC_C03
5.. Purchase Orders for analysis of purchase orders, open purchase orders (5 standard cubes)
     0PUR_C01 And also check 0PUR_*
Thanks
Reddy

Copy Business content cube, load data and activation.

Hi BW gurus,
I am new to SAP BW. Like to know if you guys have any document of your own or at some site which gives me step by step instructions to copy , load data and activate a cube of business content(ex: Purchasing data 0PUR_C01).
I will assign points to the good answers.
You can also send me any documents you have on my email id: [email protected]
Thanks.
Syed Arifuddin.

1. Yes. Preparation - Connectivity between R/3 and BW and general setting is Basis team and Security or Authorization team work.
2. Customizing the Extractors. Extractors are programs to extract data from SAP R/3. You may need to customized those to fit your requirement. This requires little ABAP skill. You can check more information here.. http://help.sap.com/saphelp_nw04/helpdata/en/7a/27bcf087c7464db8b95eaa717b6e6a/content.htm
3. Set Application Active Indicator : This step is to be carried out in the R/3 system.This is not just a Purchasing related but it is a Cross-client application setting to link tow clients.
Hope this helps.
Laxmikant

Errors activating HR Business Content: cube 0PA_C01, ODS 0PA_DS02, 0PA_DS02

Hello!!
we are installing a IDES BW system for customer demos, training and so on.
I am tying to activate all HR Business Content, and I began activating Personnel Administration.
Every time that I am trying to activate HR Business Contentt objects, the following error message appears:
Err.tmpo.ejec.         CALL_FUNCTION_CONFLICT_LENG
Excep.                   CX_SY_DYN_CALL_ILLEGAL_TYPE
Error in the ABAP Application Program
The current ABAP program "SAPLRSAOS" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
A function module was called incorrectly.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "OSOA_UPLOAD" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The call to the function module "RSA1_OLTPSOURCE_GET_ALL" is incorrect:
In the function module interface, you can specify only
fields of a specific type and length under "I_T_OLTPSOURCE".
Although the currently specified field
" " is the correct type, its length is incorrect.
We have installed the following components:
SAP Netweaver 2004s:
SAP_ABA     700                     0015     SAPKA70015     Componente multiaplicaciones
SAP_BASIS     700     0015     SAPKB70015     Sistema Base SAP
PI_BASIS     2005_1_700     0015     SAPKIPYJ7F     PI_BASIS 2005_1_700
SAP_BW     700                     0017     SAPKW70017     SAP NetWeaver BI 7.0
BI_CONT     703                     0008     SAPKIBIIP8     Business Intelligence Content
SAP ECC6.0:
SAP_ABA     700                     0015     SAPKA70015     Componente multiaplicaciones
SAP_BASIS     700     0015     SAPKB70015     Sistema Base SAP
ST-PI     2005_1_700     0006     SAPKITLQI6     SAP Solution Tools Plug-In
PI_BASIS     2005_1_700     0015     SAPKIPYJ7F     PI_BASIS 2005_1_700
SAP_BW     700                     0017     SAPKW70017     SAP NetWeaver BI 7.0
SAP_AP     700                     0012     SAPKNA7012     SAP Application Platform
LCAPPS     2005_700                     0006     SAPKIBHD06     LC Applications (LCAPPS) 2005_700
SAP_APPL     600     0012     SAPKH60012     Logísitica y Finanzas
EA-IPPE     400                     0012     SAPKGPID12     SAP iPPE
EA-APPL     600                     0012     SAPKGPAD12     SAP R/3 Enterprise Extension PLM, SCM, Finanzas
EA-DFPS     600                     0012     SAPKGPDD12     SAP R/3 Enterprise Extension Fuerzas de defensa y
EA-FINSERV     600     0012     SAPKGPFD12     SAP R/3 Enterprise Extension Financial Services
EA-GLTRADE     600     0012     SAPKGPGD12     SAP R/3 Enterprise Extension Global Trade
EA-HR     600                     0028     SAPKGPHD28     SAP R/3 Enterprise Extension HR
EA-PS     600                     0012     SAPKGPPD12     SAP R/3 Enterprise Extension Administración pública
EA-RETAIL     600     0012     SAPKGPRD12     SAP R/3 Enterprise Extension Retail
FINBASIS     600                     0012     SAPK-60012INFINBASIS     Fin. Basis
FI-CAX     600                     0012     SAPK-60012INFICAX     FI-CA Extended
INSURANCE     600     0012     SAPK-60012ININSURANC     SAP Insurance
IS-CWM     600                     0012     SAPK-60012INISCWM     Industry Solution Catch Weight Management
IS-H     600                     0013     SAPK-60013INISH     SAP Healthcare
IS-M     600                     0012     SAPK-60012INISM     SAP MEDIA
IS-OIL     600                     0011     SAPK-60011INISOIL     IS-OIL
IS-PS-CA     600                     0012     SAPK-60012INISPSCA     IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT     600                     0012     SAPK-60012INISUT     SAP Utilities/Telecommunication
LSOFE     600                     0012     SAPK-60012INLSOFE     SAP Learning Solution Front-End
SEM-BW     600                     0012     SAPKGS6012     SEM-BW: Strategic Enterprise Management
SLL-LEG     7.00                     0006     SAPK-70006INSAPSLL     SLL-LEG 700 : Add-On Supplement
WFMCORE     200     0012     SAPK-20012INWFMCORE     WFMCORE 200 Upgrade: Meta-Commandfile (D
CPRXRPM     400                     0012     SAPK-40012INCPRXRPM     SAP xRPM/cProjects/cFolders 4.00 (ABAP)
ECC-DIMP     600                     0012     SAPK-60012INECCDIMP     DIMP
ERECRUIT     600     0012     SAPK-60012INERECRUIT     E-Recruiting
FI-CA     600                     0012     SAPK-60012INFICA     FI-CA
MRSS     600                     0000          -     Multi Resource Service Scheduling
ST-A/PI     01G_ECC600     0000          -     Application Servicetools for ECC 600
AIN     400                     0005     SAPK-40005INAIN     AIN 400 : Add-On Supplement
XFT     210_700                     0000          -     xft business add-on
So, can everybody help me? Do we need any component more in BW or SAP ECC? How can we solve this problem?
Thanks in advanced for your help.
Best regards,
Seshen

Hi Sam,
Please check whether datasources are installed and active in the source system.
For remote activation you need role SAP_RO_BCTRA or authorization object S_RO_BCTRA in your profile.
If not active, you can activate via RSA5.
Afterwards, install the transfer rules again.
If you are lower than SPS8, check note 929935.
Hope this helps,
regards,
Olav

Installing Business Content: cubes under Unassigned InfoArea

Why are alot of BC cubes that i installed showing under "unassigned" info area?
Please help
Thanks
Fran

Hello
How ya doin guys ?
When u drag and drop the Objects from the BC into the Collected objects the InfoArea / Application Component / IOC will also be Collected. Then in the GROUPING select ONLY NECESSARY OBJECTS.
Also, if u expand the collected InfoCube the InfoArea and InfoObjects will be displayed, check the InfoArea checkbox under INSTALL.
This will install the InfoArea and the InfoCube organized under that InfoArea.
Hope this Works....
Best Regards....
Sankar Kumar
+91 98403 47141

LOS - Business content cube

Similar Messages

Maybe you are looking for