Lose Audio when editing to tape

I am using FCP5. After about 10 minutes or rendering to tape, the blue screen with the tape comes on from my camera very briefly, and then back to the video. it does this approx. every 10 minutes. Then, after 20 minutes, the audio portion of it goes away totally (only capturing the video part). Thank you.

Thank you, Rebecca. This is new to all of us. Since I'm already a Level 4, but so far away from the points needed for Level 5 that it's an impossible situation, I'm not really trolling for points. What I am trying to do is help users to understand the new dynamics of the forums as quickly as possible.
As far as I can figure, once you've marked a post Helpful or Solved, you can't change it. It appears that you can unmark your thread Answered, though. But that's not clear to me yet.
Again, thank you for understanding.

Similar Messages

  • HT204368 I recently upgraded from an iPhone 4s to an iPhone 5.  I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s.  However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call.  I am no

    I recently upgraded from an iPhone 4s to an iPhone 5.  I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s.  However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call.  I am not certain whether it is a full disconnect or just an audio loss.  The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens.  All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
    Is is important to note that I am not the only one experiencing this issue:
    This is a link to someone using the Motorola H19txt headset experiencing the same issue
    https://forums.motorola.com/posts/94ac15ad7c
    If you go to the Plantronics website and look at the "Ratings and Reviews" on the Voyager Legend you will see the same issue reported:
    http://www.plantronics.com/us/product/voyager-legend (next paragraph is taken from the review since there is no direct link to the review.
    Really nice Headset unless you own an Iphone 5. I own several Plantronics headsets and have always loved the quality/ performance. This headset seems not to be compatible with the new Iphone 5. In the middle of a conversation it will lose all incoming audio. This leaves you trying to switch audio sources really fast in order not to lose your phone call. Ive tried 3 legend headsets and they all do the same thing. Hopefully this gets fixed soon because the headset is really nice
    Since this issue appears to affect multiple headsets from multiple vendors, I think it is fair to conclude that it is an issue with the iPhone5 bluetooth itself.
    I am posting this as a new discussion as I don't see any other posts specific to this iPhone 5 Bluetooth issue.  I would have reported this as a problem to Apple, but don't seem to be able to find a way to do this on the web.  Hopefully they are already aware, but if not, maybe they will see i here.

    here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
    There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
    Siri seems to behave properly with scenerio above---sans call button. She does not go to lock.

  • I frequently lose audio when in the middle of a call.  I am not certain whether it is a full disconnect or just an audio loss.  The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another s

    I frequently lose audio when in the middle of a call.  I am not certain whether it is a full disconnect or just an audio loss.  The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens.  All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
    My Iphone5 was replaced and having same Problem. Only does this when using bluetooth for talking.

    I have the exact same issue... I've been using a Jabra Extreme2 and just this weekend, bought a Plantronics Marque2 and today had the same issue, so it's clearly not the headset but the phone or OS.
    I might try a restore and see if it helps...

  • Cs6 audio when editing, touch or write

    Hey guys, i am getting used to cs6 after being on premeiere elements 10 for a while., but i cannot get used to the audio when editing,.On prem 10 there was the mixer and when you went along the timeline and used the sliders for the changes it rendered great and all was good, but i am finding the cs6 awful unless i am doing it wrong!! When i make changes using the sliders using the touch setting, i find when i render then i have to do it all again because cs6 is not saving what i am changing in the timeline. Please help...

    These AdobeTV tutorials might be helpful:
    http://tv.adobe.com/watch/adobe-at-nab-2013/adobe-premiere-pro-audio-enhancements/
    http://tv.adobe.com/watch/learn-premiere-pro-cs6/working-with-audio/
    http://tv.adobe.com/watch/adobe-and-your-voice/creating-a-music-video/
    Good luck,
    Hunt

  • Jittery motion when editing to tape via Blackmagic SD

    I have a situation that has me a bit perplexed, and I'm hoping one of you gurus can help. We will shoot DVCAM footage, capture into FCP (now at v5.03, but this occurred with earlier versions as well), and then export a quicktime movie (not using QuickTime conversion). I then bring the movie into After Effects, and do some compositing work, and render using Uncompressed 8 bit settings. I create a new sequence in FCP with matching settings (uncompressed 8 bit), and import the movie file I created in AE. Everything looks great on my computer monitor, but when I edit to tape, any moving objects (either effects or people in the video) jitter visibly when viewed on my broadcast monitor, and the resulting BetaSP tape. There are no unrendered sections of the sequence, and the the frame dominance is the same on the imported clip and the sequence.
    I can apply the de-interlace filter in FCP, and that improves the image somewhat, but it's still visible.
    Any suggestions?

    ... and the the frame dominance is the
    same on the imported clip and the sequence.
    it seems that the filed dominance is wrong:
    upper or lower field dominace is determined by your blackmagic card and the codec used.
    in your sequence settings use easy setup to load the correct settings for the codec you are using with your blackmagic card. after that, read what the field dominance is set to. use the same field dominance when rendering in AE.
    good luck,
    kurt

  • How do I get audio back on single clip that loses audio when imported into Premiere Pro CC?

    I've got one clip out of many that for some reason won't play any audio when imported into Premiere Pro.  I am new to Premiere Pro so am hoping it's something stupid I've done, but this is a problem with just a single clip exported the same way as all my others, the original audio is loud (not quiet) and none of the FAQ issues seem to apply (ie I haven't muted the audio or anything stupid like that)
    The clip was exported from Plural Eyes into a "master" Premiere Pro project where the audio is fine. I exported it as a short MP4 clip and if I play the clip in Windows Media Player the audio is there loud and clear.
    But when I import the clip into a fresh Preimiere Pro CC project this clip appears with just the "film strip" icon on the far left in the Timeline panel, unlike other clips which have an icon that shows "film strip" in the background and "audio wave" in the foreground.
    I'm hitting so many glitches with the CC editions of Premiere Pro and After Effects which have annoying inconsistencies between them I'm tempted to just go back to Sony Vegas Pro (single program, no hassle) but hoping most of these issues are down to "newbie incompetence". Very hard to understand why this one clip out of many should be giving me this specific problem though. Any ideas?

    I'm getting so many weird results. Most go away by simply closing the project and re-opening and I only have 6GB memory but even so, I'm disappointed by what I thought was supposed to be more "world class" video editing software than Sony Vegas Pro which I found to be a lot more stable. Also struggling with differences between Premiere and After Effects. Every time I want to do something in Pro I seem to need to go to After Effects and vice-versa. After Effects lets me do more of what I could "just do" in Vegas Pro timeline, but it's hideous for lining up audio and having to render anything in RAM to even get a clue as to what a change has done.  Need to add Audition to the long list as well I suspect. Fun times!

  • Lose audio when watching movies

    When I first started using ITunes and I downloaded movies they worked fine, I could watch the whole movie no problems. I think it was after perhaps the fourth movie I downloaded suddenly I started having audio issues. I'd get about 20 minutes into the movie and the audio when cut out and then go out all the way. I'd have to shut down itunes and come back about a half an hour later and I'd get another 20 minutes of the movie and then the audio would go out again. I have to do that thru the whole movie. I've done all the suggestions to fix it.....don't use the enhanced audio, reinstall Quicktime ect but nothing seems to be working.
    Does anyone have any other suggestions I might be able to try?
    Thanks
    H.

    Same problem with all headphones and earbuds--just checked settings and Volume Limit was already off--starting to think it's a volume system flaw tied to videos and related sound.   No problem getting plenty of sound volume for music, only videos. 

  • QuickTime Editing Basic - Loses Audio when Video is Edited

    I only have the basic quicktime version and I only want to do basic editing.  When I trim  or  split a clip, the audio input from the computer mic gets lost.  Thoughts?  Help?

    I only have the basic quicktime version
    the basic version ( QT player ) does not edit, you need to buy QuickTime Pro from here:
    QuickTime Pro
    If you mean QT X read the help files on trimming clips it explains it well

  • Losing audio when editing .mov files...

    I have 4 .mov video files that are parts of 1 video. I can't get them into Apple TV, but I wanted to join them together in one video, anyway. I'm not having any luck doing that. (I have the right to have these videos.)
    I can bring them into a sequence in FCP 6.0.6, and even export them in a form that I can put on my Apple TV. But I lose the audio, which makes them useless.
    Probably worth noting: When I bring these small .mov files into my sequence, I can see them and scrub through them, but I can't play them at all (they all have the red line indicating they need to be rendered first). I have the latest iMac 27" with the i7 processor and two internal drives, so I can't see why they'd have to be rendered first. They are really low-quality, small files (around 3MB each).
    Can anyone tell me what the problem might be? Thanks for any advice.

    I have the latest iMac 27" with the i7 processor and two internal drives, so I can't see why they'd have to be rendered first
    FCP only works natively with formats listed in the Easy Set Up list. It does NOT work natively with many formats that are intended for final delivery like MPG-4, h.264 and others. If you import those types of files into FCP they WILL need to be rendered. But it is better to first convert those files before you import into FCP. That fact that you can't hear the audio may indicate you're using a muxed format that will need to be demuxed for editing.
    This information is easily found in the User's Manual. It sounds like this would be a good time to read the basics.
    -DH
    Message was edited by: David Harbsmeier

  • Black Magic Intensity Pro Play only Audio when edit in CS 5.5

    Hi i have an problem, when i try to edit with Black Magic Intensity Pro in premiere CS5.5
    i can play only Audio but not Video so i check settings on Premiere and control panel for
    Black Magic Intensity and everything is OK and i check connections the preview is connect
    via HDMI cacle and Composite Video/Audio and in both cases i get only Audio but no Video
    so what is the problem? An driver for Black Magic Intensity Pro issue or what?
    Current driver version is 8.2.1
    Thanks.

    Thanks i already do that and nothing,again only audio no Video.
    I tray to play with integrated software Media Express who comes
    with driver and working good.
    So what is the problem the driver or Premiere CS5.5?

  • Cant hear audio when editing a video in photoshop cs6

    IM EDITING A VIDEO FOR THE 1ST TIME IN PHOTOSHOP CS6. However when I play it I dont hear any audio. Its not muted either

    Hello,
    I found this in the Adobe help files...
    "About video layers
    You can use Photoshop to edit individual frames of video and image sequence files. In addition to using any Photoshop
    tool to edit and paint on video, you can also apply filters, masks, transformations, layers styles, and blending modes.
    After making edits, you can save the document as a PSD file (that can be played back in other Adobe applications such
    as Premiere Pro and After Effects or accessed as a static file in other applications), or you can render it as a QuickTime
    movie or image sequence.
    Note: You can work only with the visual images in a video file, not the audio."

  • Slideshow Elements 9:  Lose audio when creating a .pdf file from the slideshow

    I created the slideshow in Elements 9.  Works great.  Created the .pdf and I lose the audio. I'm trying to send the slideshow via email so it can't be too huge, so I didn't consider the .wmv.  In troubleshooting it mentioned removing the artwork as one potential issue and didn't get into detail as to the other problems could be. So  I removed the artwork in Itunes from the .mp3.  I converted from .mp3 to .wav to see if that made a difference. Neither helped.  I was able to create the .pdf of a slideshow with audio in Elements 7.  What do I do to make it work?
    Trying to get this figured out to send the slideshow for Christmas so any help/suggestions are appreciated...13 days to go

    Sorry for the late reply. Have you been able to send the file?
    However, i created a slideshow with a mp3 file and when i output the same into pdf format, it just played fine with the music i applied while creating.
    Can you mention the number and size of the files that you used to create the slideshow.
    Just to add, you can also create online albums with various templates like christmas and many more and can share them with friends.

  • Rendering & Playback issues + can't hear audio when editing videoclip

    Hi,
    I have two issues.
    #1: While editing my video, is there a way I can see the video and hear the sound at the same time? I've been trying to edit a video with no sound... very difficult to place a background for example at a specific time when I can't hear my voice, I can only see the video.
    #2: After rendering, when playback in Quicktime for exemple, I can hear the sound but no video is playing. Why is that?
    Thanks

    Dont know why the last print screen is blury but it says:
    Fomart: Windows Media
    Output Windows MEdia Video 9
    Include : Project Link
    Output Audio: On
    Post-Render Action - none
    Channels: RGB
    Depth: Millions of colors
    Color: Premultiplies
    Final Size 640x480

  • Loosing audio when printing to tape.

    I used FCE to edit my DV-material. It wasn't ever a problem.
    I bought a HD-camera (Sony HDR-HC3) and edited a 40 minutes film from about 4 hours footage with FCE HD-3.0.
    Editing is no problem. Making a DVD is O.K. But printing to tape is horrible. I loose parts of the music-tracks. Sometimes dropped frames etc. (And it takes a lot of time: about 4 hours to render!).
    Many times I tried to print to tape. The problems exist every time in different places (except one place where the music always disappears).
    I don't know how to loose this problem. I always mixdown audio, remove prefs etc. but till now no positiv result.
    What to do?
    G5-2x1.8   Mac OS X (10.3.9)  

    Hi(Bonjour)!
    If there is a song bought on iTune Music Store, you can't use this track.
    Did you render an audio mixdown before export ?
    Try a test version with just one minute of movie. (set in and out point in timeline and do the print to tape operation).
    Try a print to tape from a cold start mac.
    Drag your playhead around your sequence before printing (it's seem that this process load the cahe memory, at least in my own experience)
    If the problem is still there, you can also do an audio track mix quicktime conversion export (aiff 16 bit) from your sequence, import it into a new sequence, open your previous edited one in editor (option clik), do uncheck audio A1 and A2 target, and drag the video content on V1 in the new sequence. Drag your exported audio on A1 A2.
    Do a check for the synch of your movie.
    Do not forget to do an audio mixdown before print to tape.
    Does your hard drive is fragmented or full at more than 80% level?
    Michel Boissonneault

  • Sometimes lose audio when changing modes SB X-FI Titanium HD

    When I change between game and entertainment, sometimes I lose all audio until I reboot. I have a SB X-FI Titaium HD and use DTS encoding. Also for some reason any time I reboot or change modes my receiver goes into "stereo" mode, and I have to manually change it back to DTS. Normally stereo signals show up as Pro Logic mode, and normally it detects DTS/DD and changes by itself. Any Idea why I'm losing sound, or what is kicking my Onkyo receiver into STEREO mode? I still hear the DTS, just only on left and right, downmixed. Once I manually change to DTS it works fine. Had this receiver for 7 years or so, and the only time I have ever seen it just say STEREO before is if I push the "stereo" button.
    I'm on Windows 7 64-bit, nvidia GTX 570, nvidia 780i w/ Core 2 Duo

    devilyang01 wrote:
    In fact, whenever the sound loss occurs, if i try to so much adjust any sound related stuffs i.e. changing speaker settings, muting or adjusting volumes (sometimes), my pc locks up. If i'm quick enough to shut the pc down before a lock up, the pc gets stuck at the shut down screen.
    Same problem + BSOD, when i try adjust any sound related settings.
    I tried to use the contact form with the main site, but "send" button does not work.
    Where does this problem come from?. A year ago everything was fine, it began on the rise since the end of summer. And do not use latest nvidia 285.62 drivers with latest x-fi drivers, If you had previously lost sound, with them even worse(video drivers works fine, but the sound drivers?, well, you know), the sound began to disappear almost every hour, use the older 275.xx series and below.

Maybe you are looking for