Lose sound with optical speakers after using DVD Player

For some reason when I launch DVD Player my sound will stop on all other applications. Quitting DVD Player won't fix this either. In iTunes, the song won't even begin playing. I've tried checking Audio MIDI Setup, and for my ouput I'm only allowed to choose "None". When I try to select Built-in Audio it won't let me. However, before I launch DVD Player Built-in Audio will output to the speakers. My speakers are Logitech 5.1 Z5500's and I am using the optical connections. They didn't come with any sort of drivers and seem to work fine before using DVD Player, so I don't really know what's up.
Any help is greatly appreciated,
Powermac G5 Dual 2.7 Mac OS X (10.4.3) Logitech Z5500 Digital Speakers

In DVD Player's preferences when Disc Setup -> Audio Output is set to "Digital Out - Built-in Audio" the AC3 stream is sent to the speakers. This is an encoded stream straight from the disc that provides the 5.1 channel surround sound. The computer cannot take the sound from other applications and mix it with the AC3 stream because it would first have to decode the stream, mix the sound and then re-encode the stream. This is very processor intensive and your system would take a big performance hit.
To get sounds from other applications while watching a DVD change Disc Setup -> Audio Output to "System Sound Output". You'll lose the 5.1 output from the movie but will hear the sounds from other applications.

Similar Messages

No sound from internal speakers after using audacity 2.02?

No sound from internal speakers after using Audacity 2.02 ?

Hey iberlin12,
I would check out the article containing recommended troubleshooting steps for when you don't hear audio from a Mac's built-in speakers:
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/TS1574
Best,
Delgadoh

Using DVD Player, the show goes back to menu after every chapter, even though I selected "Play Entire Episode".

It only does this on Reading Rainbow DVDs so far: Using DVD Player, the show goes back to menu after every chapter, even though I selected "Play Entire Episode". It does this whether the laptop is plugged in or is using battery power. How do I get it to play all?? Thanks.

Turns out it was NOT the software or the Mac. I bought a portable DVD player and this problem happens with it, too.

Can anyone please help me, I'm having problems with sound while watching video clips using flash player using Internet Explorer\

Can anyone please help me, I'm having problems with sound while watching video clips using flash player & Internet Explorer

There's a good chance that this is a known issue. We'll have a Flash Player 18 beta later this week that should resolve this at http://www.adobe.com/go/flashplayerbeta/

On G71-340US: very low volume when using DVD player, but OK when using Windows Media Player.

Just purchased new laptop G71-340US. Volume (at full tilt) is decent when using Windows Media Player, but when using DVD player, volume is so low I can't really hear volume on a movie unless room is completely quiet, and I am right in front of laptop. Any suggestions, or is it really this bad?

I don't have the answer, but I certainly agree. The G71-340us is severly under powered in the audio department. You would think with the extra room in the 17in. chasis they could have put a sound system with a lot more power. Other than that it's a great machine.

I have a football game recorded on a DVD R disc that I was trying to view on my MacBook using DVD Player. The video comes onto the screen, but immediately freezes, and then disappears. An error message comes up saying that DVD player unexpectedly quit.

I have a football game recorded on a DVD+R disc that I was trying to view on my MacBook using DVD Player. The video comes onto the screen, but immediately freezes, and then disappears. An error message comes up saying that DVD player unexpectedly quit. My MacBook operating system is Mac OS X, version 10.5.8. DVD Player is App version 5.0.3, framework version 5.0.7.
However, the DVD+R works on both my Dad's and my brother's laptops. My Dad's laptop is an iBook G4 with Mac OS X operating system, version 10.3.9. The DVD Player is version 4.0. My brother's laptop is a MacBook Pro with Mac OS X operating system, version 10.7.2. The DVD Player is App version 5500.26.1 and framework version 5.5.0. The DVD+R plays fine on their laptops, but will not play on mine.
Anthony

Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands.

How to bookmark ripped DVDs on a macbook using DVD Player

I have some video that I'm watching using dvd player - ripped on the hard drive for better battery performance (I presume) and also just ease when traveling ... and bookmarks are grayed out.. cannot seem to bookmark things opened as "dvd media" from the file menu. how can I bookmark where I left off so I don't have to re-open, and fast forward to where I thought I was?
tia,
ferd

Have you ripped the file and kept it in DVD format?
If you rip it using HandBrake ( http://download.m0k.org/handbrake/HandBrake-0.7.1-OSX.zip ) then it will compress the video to mp4 which will be much smaller but still near DVD quality - you can then add it to iTunes or the Movies tab (on the left hand side of the Finder) and then using Front Row (pressing command + esc or menu on the apple remote) and going to movies you can watch the video, then when you stop watching you can go back to it later and it should play from where you left off.
Matt

Problems with sound from external speakers after iOS 5.0.1 update

Have others experienced problems with external speakers on the Iphone 4 after iOS 5.0.1 update? My phone no longer rings, sounds when i receive a text message, sounds alarm, etc. Vibrate works fine and when i plug in headphones I can hear music through the headphones. Any fixes for this?

Hi Guys,
I have post eariler on another forum and I have the same problem, I have tried all the things listed here and nothing was perminant in fixing this painful iphone hating problem.... and failed. You probably have the problem when you use youtube or your music external speaker that there is no volume bar and no sound.   I have had the same problem But I need to happily say that I now have the fix!!!! This worked for me and I fixed it by myself so you don't need to go to apple or service centre or anything.
Ok I like so many of you here truly believed this was as IO5 issue as it only dropped the sound on the speakers once that IO5 update came along. I tried a bunch of reset, reboots, home clicks, lock and unlocks, to fix this and all failed. some worked for an hour but then failed. hours of my life that I will never get back.   but since I have learnt this is not a IO5 problem but a hardware issue! ... and in paticualar is has to do with your bottom connection. Your phone is thinking it is docked all the time.
To fix the no sound problem what you need is...
1. a torch
2. a tooth brush
3. methalated spirits
4. a butter knife
Step 1.
get your torch and shine it down the bottom connection plate to see what kind of dust, sand, hair or anything you have stuck in there.   all that need to be removed! everything! it might look clean but still thats ok go to step 2.
step 2.
Turn on your music app and put the speakers on! If your phone is like mine it should not work. you most probably don't even have the volume display to turn it on but its ok, just do it! and it should still play with no sound.   its important you try and run the speakers as this will show you that it is a hardware problem.
step 3.
Dip your tooth brush into some methated sprits.   then at your sink tap the exess metho out of your brush as you just want the brushes to be slightly damp, not soaking wet and then scrub the bottom connetiors on your iphone. work the brush back and forward in a way that scoops the dirt out of the phone, not just pushing it side to side.
(As you bushing you should notice the volume bar come back on or off as you scub.   This happened to me and that is how I realised I was on the right track to fixing this problem as I was doing something external that was actually controling when the volume display came on or off.   but once I cleaned it this still didn't fix the problem...)
Step 4.
Use the back side of a butter knife (not the sharp side) to gently slide over the connectors on the iphone. Do this gently as you are only pushing down on the tiny metal contect bars and you should notice the volume display come on again. slide it back and forward. Now the area of interest is about 2/3 along the connection plate to the right.   This is the area that has the infomation sent when your iphone thinks its docked.
This has worked for me and I have not had a problem since I did this 2 weeks ago.   I have since learnt that the new IOS 5 has activated a different part of the bottom conectors. if you have been using dodgy connectors or unapproved apple cables (as I was) any damage or hair and dirt on the terminal this is effecting it. Try it.   just remember if you can do something external to your phone then there lies the problem.
Hope this works for your phone as it did for mine.
Cheers

No sound after using DVD Decrypter and Videora

Last night I used DVD decrypter to rip Fight Club and then used Videora to covert the .vob file to MPEG-4, following the directions on the Videora website. I loaded into iTunes, and then onto my iPod, but the sound doesn't work at all even though the video looks great. I have converted two .avi files with videora and I've had no problem watching them on my iPod. I did notice that the instructions on the videora site said to only select the top movie in the list that has all the 2 channel and 6 channel files. The movie plays in iTunes with no sound as well. Anyone have any ideas?

OK, I am an idiot. I only selected the video and forgot the 6 channel audio.
Note for future people with this problem:
Don't just select the first file in the list under stream processing like Videora's website says. You also need to select an audio file to rip and from what I'm hearing, to avoid problems, select the 6 CH audio.

Extremely poor sound quality on all apps after using Real Player!

Hi there
On my Leopard iMac (Core2Duo) I am experiencing extremely poor 'lo-fi-like' quality on all audio from all applications including iTunes, Quicktime and Safari as a result of using Real Player to play a file online.
I very rarely use Real Player and this was the first time I'd used it in months to even a year. The file was a simple RAM file from a store website allowing me to listen to a sample of a music file. When played, the quality was low but I expected this from a music sample, and from Real Player. However, after closing Real Player, I noticed the sound quality had dramatically dropped to an almost un-listenable quality.
I have restarted and uninstalled Real Player with no luck. The poor sound quality still comes through my internal speakers, as well as external speakers, so it seems like a software issue.
Not sure what to do, please can anyone help as the audio is used all day every day on this iMac!
Thank you

Just tried it as I did get iLife with my Mac. GarageBand froze for the first few times I loaded it up, then I managed to get it to work. Played with the on-screen keyboard which produced perfect sound.
Closed GarageBand, restarted iTunes, tested, working perfectly! Crystal clear sound back again!
Thanks so much for that, really appreciated!
=]

No sound through tv speakers after connecting dv7-1247cl via hdmi

no sound on laptop after hdmi for external screen is plugged.if unplugged sound on laptop is ok

Hello guanaco1,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how there is no sound coming to the TV from your DV7-1247cl notebook over an HDMI connection, and I would be happy to assist you in this matter!
To further diagnose the issue, I recommend following this document on Troubleshooting Audio Problems with External Speakers, Headphones, and HDMI Sound Devices. This should help with the sound transfer from your notebook to the TV.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Have a great weekend!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Sound problems after opening DVD player

When I open DVD player I no longer get sound output on webpages unless I restart safari or firefox
I've got sound outputted through digital output
Everything is fine before but the second that DVD player opens and even after it's closed down I still don't get sound output on webpages until I restart the browser
Anyone got any ideas ???
Cheers

Since it's so new, I would call AppleCare Support or bring it into an Apple store. That shouldn't be happening with a brand-new Mac.
-Doug

When playing a home video DVD using DVD Player I tried to use the "Controls, Use current frame as jacket picture" facility to create a printable image but with no success. Can anybody point me in the right direction?

When playing a home video DVD (created on my Panasonic DVD/Hard Disc recorder) using the Mac DVD Player, I tried to use the "Controls, Use current frame as jacket picture" facility to create a printable image but with no success. I assume that any file created by this action would be stored somewhere in a common format but cannot find any such file. Can anybody point me in the right direction?

Hi Sinious,
Interesting to know about 10.8 and Flash. I'll hold off upgrading until they work together. Currently using 10.6.8 at home and same on the Universtity's computers.
Haven't verified on Windows but shall do later in the week if I can get access to a Windows machine.
Both the Flash player and the Projector come up not full screen, and if I leave it that way then things work OK as long as I don't make the video full screen (using the full screen button on the skin).
However if I make the swf or projector full-screen (by using CMD-F or the menu option) then when I click on the menu item to take me to the page with the video on it, instead of a page with a smallish video and back button I get a black screen with no obvious controls. If I then press Escape I get my normal screen back and I am in the page that should have the video but there is not video and the back button does not work. So something wierd is going on here.
If I make a file without any videos with a similar navigation structure everyting works ok except that when I go full screen I lose the finger cursor when I roll over my buttons (which is also wierd).

Unbalanced sound with 2 speakers - almost all coming out the left spea

My Audigy SE card with 2 speakers (one Altec Lansing with the amp in and the other a decent 6 ohm Infiniti) puts nearly all the sound out of the left speaker (the Infiniti). I couldn't find a balance control in the Creative mixer and had to go back to control panel sound to crank the balance wildly to the right. I realise the speakers aren't matched but they worked just fine until I re-installed Windows and all my Creative software last week.
I haven't tried recording yet but I hope that will be in balance.
CRIKEY! While I was typing, the right speaker suddenly cranked itself up. Bit odd. Just in case this is a Creative problem, I will post it anyway.

Did you ever fix this problem? I have the exact same thing happening to my sound.
All the sound comes from the left in stereo sound. I plugged the green stereo analog speakers into the other pin the blackone for 4. setting on my SBLi've24 allthe others play fron t left back left and back right but the front right is so soft like a whisper.
So the speakers work. Im running a Xp mediaedition system. It happened after an apparent sound conflict that made an electronic popping sound which got progressi'vely worse until i figured out how to reset the car d in the Bios level. I have done evrything but reformat the hard dri've All tests say the hardware is working but still no front right channel. Help please

My mac mini loses connection with my receiver after turning off the receiver then back on

My Mac Mini loses connection with my Onkyo receiver NR-609 after turning off the receiver then back on. The only way to reistablish the connection is to unplug then replug the HDMI cable to the Mac Mini. There's no effect if I unplug then replug the HDMI to the receiver. Any help or suggestions would be appreciated. I've searched a lot but haven't found much of anything so if this is covered elsewhere I would greatly appreciate a link.
Thanks in advance

Hi and thanks. I don't know about the audio prefs. When it happens I am not able to see or hear anything from the computer until I un/re-plug the HDMI to the Mini. I'm not sure it's changing to something else because there's nothing else connected for it to change to. I could see that perhaps the audio will change to the Mac Mini's internal speaker.
I found out last night that if, after I lose the signal, I use my ipad to play a video on the Mac Mini using the Remote app and home sharing the signal gets righted and I can see/hear the computer again. It's quite an inconvenient fix though and I wish and hope someone here can help me.

Lose sound with optical speakers after using DVD Player

Similar Messages

Maybe you are looking for