Lose sync and continue with DV Playback

help
Lose synce and continue playback and disconnect wheni played DV Format
with any hard disk

hello Ahmed
try to explain the problem with more detail.
what version of FCP do you use? what DV camera? what hard drive?
thanks
Andy

Similar Messages

  • All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?

    All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?

    Are the songs playing whole in iTunes? if not download them again.
    else read this Apple Support Article on your problem
    Have a nice day!

  • My ipad 2 is blocked on Terms and conditions screen, it doesn't allow me toaccept or not accept and continue with the last steps of configuration, ihacve updated to ios 7.0

    I have installed the new io 7.0, and when it is on the way to configure all functions, after the ICloud, when terms and conditions confirmation apperas, it is stucked

    Reset iPad and continue with update.
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • HT1473 I have iTunes on my Dell Vista 64 bit and while trying to burn a book to cd it keeps telling me to insert a blank cd when I have done that already.  What do I need to do to get it to recognize a blank cd and continue with the burn?

    I have iTunes on my Dell Vista 64 bit and while trying to burn a book to cd it keeps telling me to insert a blank cd when I have done that already.  What do I need to do to get it to recognize a blank cd and continue with the burn?

    Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
    Dell Inc. Inspiron 5721
    iTunes 11.1.3.8
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 2.3.6
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.0.0.117
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 002FB7200B6E2500
    Current user is not an administrator.
    The current local date and time is 2014-01-01 16:14:14.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.1.3.8 (x64) is currently running.
    iTunesHelper 11.1.3.8 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.3.0),
    D:   PLDS DVD+/-RW DU, Rev 
    Audio CD in drive.
    Found 15 songs on CD, playing time 55:35 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:13:47
    Track 3, start time 07:40:44
    Track 4, start time 11:32:54
    Track 5, start time 14:33:34
    Track 6, start time 18:24:06
    Track 7, start time 22:00:28
    Track 8, start time 25:36:27
    Track 9, start time 28:47:47
    Track 10, start time 32:56:24
    Track 11, start time 37:07:54
    Track 12, start time 40:11:29
    Track 13, start time 45:02:62
    Track 14, start time 48:42:65
    Track 15, start time 51:56:11
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are:   24.
    The drive CDRW speeds are:   24.
    The drive DVDR speeds are:   24.
    The drive DVDRW speeds are:   24.
    The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D:   PLDS DVD+/-RW DU on CDR media at speed 24X.

  • I will combine Win 8.1 and Mac system in Creative Cloud program. Is that possible in same license. Start the work in Mac and continue with Win 8.1 and do presentation on Ipad ???

    I will combine Win 8.1 and Mac system in Creative Cloud program. Is that possible in same license. Start the work in Mac and continue with Win 8.1 and do presentation on Ipad ???

    Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
    -Windows or Mac does not matter... 2 on the same operating system, or 1 on each
    Check this link to see what is available for an ipad
    -http://www.adobe.com/products/catalog/mobile._sl_id-contentfilter_sl_catalog_sl_mobiledevi ces.html

  • Place Call and continue with remaining script steps - is it possible?

    We recently picked up IPCelerate which has the ability to send a Text display or Text-to-Speech message to a group of phones simply by dialing a configured directory number.  We would like to text our call center agents with this application when a caller has been waiting for X number of loops.
    Attempting to use 'Place Call' to initiate this text page works, however, the script terminates immediately after the call is placed and we would like to continue on with the remainder of our script.  In this case, on Success go back to the top of the loop.   
    I have also tried to use Call Subflow instead, thinking an executed sub-routine placing the call would return to the original script and continue on, but it didn't.  In both cases, the system comes back and states " I'm sorry, we're currently experiencing system problems and are unable to process your call.  Please try again later."
    If there's a way to get this to work via Place Call or another process to accomplish the same result, that would be fantastic.  I appreciate any feedback.
    We're using UCCx Express 5.0 (2.064) with premium type licensing.

    Hello,
    I did get to an answer similar to what r.stockton did to solve the issue, but I left Exception (ContactInactiveException) Goto in ours to isolate exceptions because we have multiple contacts within our script.  Turns out that this particular exception was thrown by the PlaceCall step ending abruptly by our paging system answering and hanging up the call quickly.  MIVR logs showed that it didn't bomb as immediately as when the debugs showed it crashing - it actually went into a loop over and over with the Trigger contact before failing.
    We had some help from TAC on this, but below is what we did to keep some error checking and notification we use available to us.  We are running a check to make sure the Call Trigger (original call) is still active.
    placecallContact = Place Call (to Number)
    on Exception (ContactInactiveException) Goto
    label:
    CallActive = Get Contact Info (--Trigering Contact--, Active)
    If (CallActive) Then
    - True branch continues with script
    - False Branch terminates call
    If this takes the false branch, it means the trigger contact is not active, and has abandoned the call or been transferred elsewhere.  Placed an End step here to prevent any loops.
    If this takes the true branch, it means the triggering contact is actually still active. In our scenario, CallActive (boolean variable) is verified true and continues with the script without going into the loop of death.
    I hope this helps!

  • Can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?

    can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?

    thanks

  • Sync and compare with remote

    Have just installed DWmx 8 on a new machine and found that
    the context
    menu for sync and compare with remote is not enabled..
    I assume it is something to do with the way I have configured
    my sites...
    Any ideas???

    Can you log into .mac mail? That will tell you if your username and password are OK.
    I recently had a similar problem, so I unregistered my work and home computers (using the Advanced tab of .mac preferences) from .mac then re-registered them. At that point, you are offered the initial sync choices like the first time you connected to .mac.
    Be careful that you don't overwrite your data. I highly suggest making backups of your Address Book, Safari Bookmarks, iCal, iDisk files, etc. on all computers before starting the process.
    - Wayne
    PowerMac G5   Mac OS X (10.4.8)  

  • My iphone 3gs is charging on the wall charger but wont charge on the pc, have cleaned it, yet it can sync and update with itunes easily, but it still wont charge, have tried several cables as well same effect.

    my iphone 3gs is charging on the wall charger but wont charge on the pc, have cleaned it, yet it can sync and update with itunes easily, but it still wont charge, have tried several cables as well same effect.

    1) authorize iTunes on your wife's user account for her iTunes store account(s)
    2) connect the device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
    3) sync the device
    iTunes will wipe the iPhone but, since you transferred her purchases in the previous step, your content will be in her library and you can re-populate the iPhone with it.

  • How to ignore error and continue with next value in PL/SQL FOR loop?

    hi,
    When the DROP INDEX statement fails it have to continue with the next value in FOR loop without exiting from the loop. Can anyone tell me how to do this?
    DECLARE
    CURSOR aud_cur IS
    SELECT key_col_idx FROM audience_work where aud_ref_id between 106 and 109;
    BEGIN
    FOR aud_row IN aud_cur LOOP
    EXECUTE IMMEDIATE
    'DROP INDEX ' || aud_row.key_col_idx;
    END LOOP;
    END;
    Thanks,
    Noble

    DECLARE
      CURSOR aud_cur
      IS
      SELECT key_col_idx FROM audience_work where aud_ref_id between 106 and 109;
    BEGIN
      FOR aud_row IN aud_cur LOOP
        begin
          EXECUTE IMMEDIATE 'DROP INDEX ' || aud_row.key_col_idx;
        exception
          when others then
            if sqlcode = -01418 then
              dbms_output.put_line(' index does not exist ');
            else
              dbms_output.put_line(sqlcode);
              raise;
            end if; 
        end;
      END LOOP;
    END;
    /

  • I want to get rid of my laptop and use an iPad. Will I be able to keep my iPhone synced and updated with the iPad?

    I want to get rid of my laptop and use an iPad2. Will I be able to keep my iPhone updated and synced by using the iPad2 like I currently do with the laptop?

    No. You must use a computer to sync and update both devices via iTunes on the computer. The iPad2 cannot replace the laptop for syncing purposes.

  • E90 sync(and more) with linux

    Hi,
    I've seen some threads about syncing with linux, but thought I'd mention my need of a good solution of not only syncing the E90 with linux, but also have access to advanced features like Nokia maps. I'd hate to have a very capable phone, but miss features because only windows PCs are supported.
    As I'm not ready to pay 800€ for a phone I can't fully exploit, I'm looking for people with experience with the E90 and linux, eg: can it be synced and backed up easily? can I transfer maps to the phone from a linux pc? Is the phone usable as a USB mass storage for file transfers?
    Maybe Nokia should learn from HP, who makes linux drivers for all their printers.... In that case I wouldn't hesitate to buy the E90.
    Thanks in advance
    Raph

    I submitted something like that recently: To my surprise, at a "general" discussion group, I found out that most people used Linux there!
    But large companies favor large companies, and do not change their ways easily. It will probably take another two years before Nokia realizes that it's producing products (like PC Sync) that most of its users cannot use.

  • Please Help! Ipod syncing and copying with itunes but Ipod shows No Music

    I don't know what I am doing wrong, I've got maybe 30 songs in Itunes, I connect the ipod, the ipod shows up in itunes. I have tried the following ways to get music from the library onto the pod
    1. Right Click 'my pod' - select update songs
    2. Top menu File - select songs on my pod
    3. Right Click 'my pod' - select 'options' tick automatically update all songs,
    4. As 3 but selected Manually update songs
    In each instance the itunes thing goes through the motion of syncing, copying and updating etc
    Then if you click on 'my pod' you can see in itunes all the music is there although you can not click on it or play it but the list is there.
    However when I detached the pod it says No Music, No Playlists
    Nothing
    I checked the status and the ipod is empty
    I don't know what else to do!!
    Please can someone help
    Many Thanks in advance

    Your libarary doesn't just appear on any computer you sign into with your appleID.  If your computers are on the same network, you can enable home sharing and access the other computer's library this way.

  • Can't sync and backup with the latest itunes

    as after i updated itunes to the latest version, i can't even sync my phone and backup my phone to my laptop. All of my song and my photo in the phone are just disappear, an unknown message just mention that your itunes library is lost please create a new one!!
    juz to know how to solve this problem and this made my system down too. thank you

    Yes, iPhone 3GS will sync with iTunes 11.0.4 for Windows

  • Retire Oracle Designer development and continue with just using Forms 11

    Hi,
    The company I am working for is taking over responsibility for an Oracle Designer 10 application.
    Due to Oracle Designer is an outdated development environment we are looking for potential solutions how to get rid of Designer without completely redeveloping or replacing the application.
    One options we thought about is to switch off Designer and only continuing to use Oracle Forms 11.
    Do anyone of you have experience in this area which you would like to share?
    Best regards,
    Marco

    There are a lot of case generated (CG$) trigger and procedures used in the Forms. For us the code seems to be very complex and hard to read.
    But, also some of them seems to be never used or it is just the statement "null" in it.
    We thought about SQL Developer Data Modeler to capture most of the Designer stuff. But still there is the technical documentation that is not fully supported by SDDM. Did anyone migrate these Designer documentation to an other tool? If yes, to which one and how? We tried the SDDM Report functionality to capture some of the documentation, but also these reports do not contain everything that Designer could provide.
    There are also "Preference Sets" used in Designer and we are wondering how to migrate these to Forms Builder. Did anyone migrate these preference sets to Forms Builder in the past and has some experiences/examples/recommendations about that? We thought about one "global" form that could contain these preference sets and then inherit them.
    There are also the Functional Hirarchie Diagrams in Designer, could they migrated to Forms or SDDM in any way? Or do we need to maintain these diagrams manually in a tool like Word or Visio?
    If we could capture all the things mentioned above, we would like to continue just with Oracle Forms Builder 11gR2 in combination with other tools like SQL Developer and Data Modeler and if no other solution could be find out with some manual maintained documents.
    For all recommendations and tips we are very interested and we would thank you all very much!

Maybe you are looking for