Lose the control of the video effet ! Help me
I'm a novice on Premier Pro CS5.5. I dont know what's happen. I can't not operate any key of video effect after the stop image effect periode in the middle of my element. So, the opacity and the incrustration Cache transparent-8points can not be change for the résidual part of the element. Look on the picture below, the opacity dont work and then, the 60 appear directly in the glasses. In the first picture above, i use the opacity and the video effect Cache transparent with success before the stop image effect periode. Somebody can help me ?
Salut, That's amazing. It's work. But that was not easy for me to find and translate (in french) the word " nest". It's mean "imbriqué". I understand with this dictatorial video : http://www.video2brain.com/en/videos-2729.htm Tank you so much, colin Michel
> Date: Mon, 12 Sep 2011 14:47:01 -0600
From: [email protected]
To: [email protected]
Subject: Lose the control of the video effet ! Help me
Do your time remapping on the clip, and then select it and go to Sequence > Nest. Add your remaining effects to the nested clip.
>
Similar Messages
-
How can you hide the controls for the video (faster)
Hi there, I've created a new video player for my client who has bounced the job as the subs are overlaid by the controls of the video - he still wants the full screen option but does not want to see the controls once you play the video.
Here is the work so far: http://www.wecreativ3.com/trust/trust-videoplayer.html
Any way to do this?Hi,
Please check this:
http://css-tricks.com/custom-controls-in-html5-video-full-screen/
Hope that helps!
Regards,
Meenakshi -
Is there a way of connecting the ipad to the smart board in the classroom, so that the smartboard is the control, and the ipad is displaying what is on the smartboard? This is to help a visually impaired child see what is on the smartboard.
Absolutely!
Install Splashtop2 on the PC and enable it to be controlled or ran from iPad or Reflection to simply allow iPad to serve as PC unwired monitor. With Splashtop and an Apple TV connected, you use the smartboard as usual, yet the PC and iPad can see the same content. The impaired child can even interact with the Smart Board via the iPad as if he were writing directly on the big screen. Erasing functions can be done by touching the Smart Board manual controls. Several variables are in play that cause this lack of functionality:
Apple won't permit PC software that infringes its proprietary apps.
Smart Board companies refuse to develop iPad apps because they feel threatened and are being replaced by iPads
School districts think Apple TV is meant for copyright infringement and could expose them to safe harbor lawsuits
Network administrators make it impossible to login Apple TVs because they don't want the streaming occurring
Classrooms are not able to keep up with the technology of using the iPad
Clicker companies refuse to play with iPad because they see it as a potential threat to their core business clients
Apple is not working as hard as it could to exploit its capabilities in education, thus losing money in iPad sales
The bottom line is that we educators and technology developers are hurting our childern with petty conflicts. -
When I import videos taken with my iPhone 4S to my Windows PC, some of the landscape videos are upside down and all of the portrait videos are rotated 90 degrees. It makes a difference depending on what position I hold the Iphone when taking videos. Help!!!!
Sometimes syncing will have problems with very large video files like this. I'm not sure you will be able to overcome this, but if the videos are important enough you may consider purchasing 3rd party software such as Touch Copy to transfer them.
-
Hi there,
I'm using a sap.ui.table.Table and want to add rows. However, I get the error message stated above in the title of this thread.
The same happens when adding the rows via XML view by defining the rows aggregation.
Coding in Table-dbg.js
* @see JSDoc generated by SAPUI5 control API generator
sap.ui.table.Table.prototype.addRow = function() {
jQuery.sap.log.error("The control manages the rows aggregation. The method \"addRow\" cannot be used programmatically!");
Any ideas?
Regards
TobiasHi Tobias,
A row could be added to the model instead.
Below post might help.
Re: Adding 1 row to a table in SAPUI5 with local data(textfields etc...)
Thanks and Regards, Venkatesh -
After updating my iPhone 4 to iOS7, the controls on the headset are not working anymore. However, the controls are working on my friend's iPhone 5. Is this a common issue?
ofel wrote:
After updating my iPhone 4 to iOS7, the controls on the headset are not working ..
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
Query related to the transfer of the control to the other controller.
Hi all,
I have a query related to the transfer of the control to the other controller.
I have components A and B .From a view of component A I neeed to open a window which belong to component B.Problem is that ,if I use create_window_for_cmp_usage( ) and the open( ) method and after that there is some code,then that code is getting executed before the window is opening.
I want that the control should be back to the these code after the window is poped up and after clossing the window.
Eg
method ONACTIONOPEN_WINDOW .
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window = lo_window_manager->create_window_for_cmp_usage(
interface_view_name = 'ZHELLO_WORLD'
component_usage_name = 'USAGE_HELLO'
title =
close_in_any_case = abap_true
message_display_mode = if_wd_window=>co_msg_display_mode_selected
lo_window->open( ).
data a type i.
data b type i.
a = 2.
b = 3.
a = a + b.
endmethod.
In this case I am calling ONACTIONOPEN_WINDOW method.But before opening the window the a iscalculated here.I want that after popuping the window the calculations should be done .
How will I achieve this.
Thanks in advance.
Edited by: vaibhav nirmal on Nov 25, 2008 6:42 AMHi,
You will have to do your calculation as an event in your new window, or capture the closing of the new window as an event in your currenbt view and do your calculations in the event.
Regards,
Shruthi R -
Enable the control of the timing of the imput
I got a program that enable me to control the opening of 8 valves manually. However, I need to automate the process and be able to key in the time that a valve will open automatically. Thus, Is there any function that allows the control of the timing that the input go into the main program or is there any other solution to the problem that I had. Thanks
I am already able to control the valves manually. But I need to improve the program to a state where I can just key in the time delay that i want the valves to open after I run the program automatically.
-
Where is the controls for the built in iMac camera
Where is the controls for the built in iMac camera? I looked through the System Preferences icons and can not find any reference to the internal camera.
Open Photo Booth in the Applications folder or on the Dock. Any application that can use a camera will operate it, also.
-
I had to do a complete uninstall and reinstall of my up-t0-date Firefox due to another problem (it would only open one window), but after reinstalling my extensions, their icons were not displaying.
I uninstalled and reinstalled again, but the Personas Plus fox will not display in the status bar, and the Video Download Helper icon will not display in the Navigation toolbar, and is not available in the Customize Toolbars menu.
These extensions worked fine before. What's wrong now?You need to set options in those add-ons and/or use Customize Toolbars. Always look at instructions on each add-on's page at https://addons.mozilla.org/ ,
-search for and locate the add-on,
-open the page for that add-on,
-review the information there,
-then visit and bookmark the developer's home page shown on the add-on page; many add-on developers also have a forum for questions, so look for a link on the developer's home page.
Most questions can be answered in one of those places.
<u>'''ABP'''</u>: Tools > Add-ons > Extensions, locate and click on ABP, click Options, in ABP interface, click on Options tab, if no check mark at "Show in toolbar" or "Show in status bar", you can click on each of those items to place a check mark and they will show in one or both places. On the add-ons page https://addons.mozilla.org/ visit and bookmark the developer's home page and forum.
<u>'''NoScript'''</u>
'''''For the toolbar''''': scroll down on the following to the paragraph in the first section beginning with "A set of toolbar buttons is also provided:" and read that section: http://noscript.net/features#basics . It gives instructions on using the Customize Toolbar function to place the icon on your toolbar. Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]'''
'''''For the Status Bar''''': Tools > Add-ons > Extensions, locate and click on NoScript, click Options, click Advanced tab, check your preferences; see 4th image on: http://noscript.net/screenshots
<u>'''IE Tab 2'''</u>: Tools > Add-ons > Extensions, locate and click on IE Tab 2, look under "Image Gallery", 3rd row, 1st image: https://addons.mozilla.org/en-US/firefox/addon/92382/ . Unfortunately, this developer has moved his home page and not updated the add-ons page. I use IE Tab Plus (formerly Coral IE Tab). -
Video: When the controls appear, the video disappears...
I am having trouble with video playback. Whenever I mouse over the window playing the video to access the controls, the video disappears (it is still playing) while the controls are visible. What do I do to fix this?
I have the same problem. I bet it has to do with windows update to sp3. I also bet that there will be a new version of iTunes to accommodate sp3.
-
i am trying to display the output from my ipod touch on apple tv. i can get the audio but no video. Thank you for any advice.
What output are you trying to get to your tv?
-
I have up dated my iPad 2 too osi7 and I can't open the control centre by swiping. please help!
I have up dated my ipad 2 to osi70.2 and can't open the control centre by swiping up from the bottom as shown on web. Is there a setting I need to change?
Swipe up from bottom of screen.
Control Center
http://support.apple.com/kb/HT5858 -
I am trying to build a proof of concept where a WPF form is hosted in a seperate runspace and updates are handled from the primary shell/runspace. I have had some success thanks to a great article by Boe Prox, but I am having an issue I wanted to open up
to see if anyone had a suggestion.
My goals are as follows:
1.) Set control properties from the primary runspace (Completed)
2.) Get control properties from the primary runspace (Completed)
3.) Respond to WPF form events in the UI runspace from the primary runspace (Kind of broken).
I have the ability to read/write values to the form, but I am having difficulty with events. Specifically, I can fire and handle events, but the minute I try to reference the $SyncHash from within the event it appears to cause a blocking condition hanging both
runspaces. As a result, I am unable to update the form based on an event being fired by a control.
In the example below, the form is loaded and the following steps occur:
1.) Update-Combobox is called and it populates the combobox with a list of service names and selects the first item.
2.) update-textbox is called and sets the Text property of the textbox.
3.) The Text value of the textbox is read by the function read-textbox and output using write-host.
4.) An event handle is registered for the SelectionChanged event for the combobox to call the update-textbox function used earlier.
5.) If you change the selection on the combobox, the shell and UI hangs as soon as $SyncHash is referenced. I suspect this is causing some sort of blocking condition from multiple threads trying to access the synchronized nature of the hash table, but I am
unsure as to why / how to work around it. If you comment out the line "$SyncHash.TXT_Output.Dispatcher.Invoke("Send",[action]{$SyncHash.TXT_Output.Text = $Value})" within update-textbox the event handler will execute/complete.
$UI_JobScript =
try{
Function New-Form ([XML]$XAML_Form){
$XML_Node_Reader=(New-Object System.Xml.XmlNodeReader $XAML_Form)
[Windows.Markup.XamlReader]::Load($XML_Node_Reader)
try{
Add-Type –AssemblyName PresentationFramework
Add-Type –AssemblyName PresentationCore
Add-Type –AssemblyName WindowsBase
catch{
Throw "Unable to load the requisite Windows Presentation Foundation assemblies. Please verify that the .NET Framework 3.5 Service Pack 1 or later is installed on this system."
$Form = New-Form -XAML_Form $SyncHash.XAML_Form
$SyncHash.Form = $Form
$SyncHash.CMB_Services = $SyncHash.Form.FindName("CMB_Services")
$SyncHash.TXT_Output = $SyncHash.Form.FindName("TXT_Output")
$SyncHash.Form.ShowDialog() | Out-Null
$SyncHash.Error = $Error
catch{
write-host $_.Exception.Message
#End UI_JobScript
#Begin Main
add-type -AssemblyName WindowsBase
[XML]$XAML_Form = @"
<Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
<Window.Resources>
<DataTemplate x:Key="DTMPL_Name">
<TextBlock Text="{Binding Path=Name}" />
</DataTemplate>
</Window.Resources>
<DockPanel LastChildFill="True">
<StackPanel Orientation="Horizontal" DockPanel.Dock="Top">
<Label Name="LBL_Services" Content="Services:" />
<ComboBox Name="CMB_Services" ItemTemplate="{StaticResource DTMPL_Name}"/>
</StackPanel>
<TextBox Name="TXT_Output"/>
</DockPanel>
</Window>
$SyncHash = [hashtable]::Synchronized(@{})
$SyncHash.Add("XAML_Form",$XAML_Form)
$SyncHash.Add("InitialScript", $InitialScript)
$Normal = [System.Windows.Threading.DispatcherPriority]::Normal
$UI_Runspace =[RunspaceFactory]::CreateRunspace()
$UI_Runspace.ApartmentState = [System.Threading.ApartmentState]::STA
$UI_Runspace.ThreadOptions = [System.Management.Automation.Runspaces.PSThreadOptions]::ReuseThread
$UI_Runspace.Open()
$UI_Runspace.SessionStateProxy.SetVariable("SyncHash",$SyncHash)
$UI_Pipeline = [PowerShell]::Create()
$UI_Pipeline.Runspace=$UI_Runspace
$UI_Pipeline.AddScript($UI_JobScript) | out-Null
$Job = $UI_Pipeline.BeginInvoke()
$SyncHash.ServiceList = get-service | select name, status | Sort-Object -Property Name
Function Update-Combobox{
write-host "`nBegin Update-Combobox [$(get-date)]"
$SyncHash.CMB_Services.Dispatcher.Invoke($Normal,[action]{$SyncHash.CMB_Services.ItemsSource = $SyncHash.ServiceList})
$SyncHash.CMB_Services.Dispatcher.Invoke($Normal,[action]{$SyncHash.CMB_Services.SelectedIndex = 0})
write-host "`End Update-Combobox [$(get-date)]"
Function Update-Textbox([string]$Value){
write-host "`nBegin Update-Textbox [$(get-date)]"
$SyncHash.TXT_Output.Dispatcher.Invoke("Send",[action]{$SyncHash.TXT_Output.Text = $Value})
write-host "End Update-Textbox [$(get-date)]"
Function Read-Textbox(){
write-host "`nBegin Read-Textbox [$(get-date)]"
$SyncHash.TXT_Output.Dispatcher.Invoke($Normal,[action]{$Global:Return = $SyncHash.TXT_Output.Text})
$Global:Return
remove-variable -Name Return -scope Global
write-host "End Read-Textbox [$(get-date)]"
#Give the form some time to load in the other runspace
$MaxWaitCycles = 5
while (($SyncHash.Form.IsInitialized -eq $Null)-and ($MaxWaitCycles -gt 0)){
Start-Sleep -Milliseconds 200
$MaxWaitCycles--
Update-ComboBox
Update-Textbox -Value $("Initial Load: $(get-date)")
Write-Host "Value Read From Textbox: $(Read-TextBox)"
Register-ObjectEvent -InputObject $SyncHash.CMB_Services -EventName SelectionChanged -SourceIdentifier "CMB_Services.SelectionChanged" -action {Update-Textbox -Value $("From Selection Changed Event: $(get-date)")}Thanks again for the responses. This may not be possible, but I thought I would throw it out there. I appreciate your help in looking into this.
To clarify the "Respond to control events in the main runspace"... I'm would like to have an event generated by a form object in the UI runspace (ex: combo box selectionchanged event) trigger a delegate within the main runspace and have that delegate in
the main runspace update the form in the UI runspace.
ex:
1.) User changes selection on combo box generating form event
2.) Event calls delegate (which I have gotten to work)
3.) Delegate does some basic processing (works)
4.) Delegate attempts to update form in UI runspace (hangs)
As to the delegates / which runspace they are running in. I see the $synchash variable if I run get-var within a delegate, but I do not see the $Form variable so I am assuming that they are in the main runspace. Do you agree with that assumption? -
looking for a way to have. both mute in lock symbol in the control panel. don't like that I can only have one working at a time
I have posted this many, many times here. See if this helps you understand how this process works with regard to system sounds and screen rotation lock.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you are running iOS 5 or iOS 6, the system sound control is in the task bar at the bottom. Double tap the home button and swipe all the way to the right in the task bar to get to the speaker icon on the left side. Tap on that and the sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
Maybe you are looking for
-
Errors and slow performance copying lots of files between large hard drives
After upgrading to Snow Leopard, I have VERY slow file transfer speed with external eSATA drives. While trying to upgrade from a 1.5TB drive to a new 2TB drive, the copy took almost 24 hours and then failed on a large Fusion virtual OS file. So I rem
-
Please Help | Major Problems | Lost Job/Need Fix
Hello guys, I have an Early 2011 Macbook Pro with many problems and I don't know where to begin. There are so many things that Ill just list a few to get started. Here are my specs: MacBook Pro (15-inch, Early 2011) 2.2 GHz Intel Core i7 8 GB 1067 M
-
How to create an Undefined Code Combination from API? (Urgent)
Hi All, I used the following API to create the code combinations in a Inventory custom form. SELECT CHART_OF_ACCOUNTS_ID INTO :PARAMETER.CHART_OF_ACCOUNTS_ID FROM ORG_ORGANIZATION_DEFINITIONS WHERE ORGANIZATION_ID = :PARAMETER.ORG_ID; FND_KEY_FLEX.DE
-
JCA Database adapter - stored procedure xa or non xa datasource
Hi I have a quick question about datasources. Does the database adapter support both xa and non xa? I am currently running in non xa I really do not need any xa functionality, but I am experiencing some calls to the database that takes a very long ti
-
How can i retrieve my password to access my backup restore for my iphone
how can i retrieve for backup password for my iphone