Loses date and time after restart

It seems as if my MacBook has gotten a bit more sluggish and so I rebooted it. After the reboot the date/time went back to the year 2000. This is not normal. I am not sure if I have a hardware issue or a software issue. I have 2GB's of RAM which is not great, but should be enough for SL. The Mac gets sluggish when more apps are open which is expected with only 2GB's of RAM. But I just wonder if I am having a motherboard issue like I did the last time I had these slowness symptoms on my then Ibook G4.
John

Mine just did the same thing. I did a complete shutdown and when I restarted, I had the wrong date and time plus the system had lost my WIFI network password.

Similar Messages

  • HT202157 Apple TV says it is updating date and time after a power outage here.  But nothing happens.  The wheel just keeps spinning.  What do I do to be able to use my apple tv?

    Apple TV says it is updating date and time after a power outage. But the wheel just spins and nothing happens..  The software is updated and my wifi router is on and working fine and recognized by the Apple TV.  How do I get Apple TV to work again?

    Thanks for the tip.  Unfortunately "Restart" did not change the situation.  I then used the "Restore" option.  After about 45 minutes of the unit going through the process, Apple TV was up and running again.

  • E71 Asking Date and Time after a restart

    Hi,
    Yesterday when I connected my E71 with Ovi PC Suite, it prompted me, I have a phone firmware update available and unfortunately I clicked on update, the phone was updated in 15 mins but now a weired problem is happening whenever I restart the phone it asks me for the Date and Time. This was not happening a day ago.
    Please if some one can help out on this issue, is there anything I am missing? Is there a way that I can move to my old firmware because that was better than this update.
    Thanks in advance.
    Regards... 

    Hi Balaji.
    Use CONCATENATE functionality.
    A sample code snippet for your reference :-
    CONCATENATE  p_path  text-202 c_9 p_name c_9  lv_fcount  c_9  lv_date
                                                 c_9 lv_time  INTO  gv_file.
    Regards
    Abhii

  • My new Nokia Lumia 800 changes date and time after...

    When i switch off and on my Nokia Lumia 800, date and time changes: from 2 september 2012 8.00 to 2 march 2013 14.00. I need help to understand this strange problem and find a solution.

    chrysale wrote:
    I had the same problem with my Lumia 800. The Lumia 800 kept changing time and date as soon as I switched it off and turned it back on. In my case, doing a HARD RESET helped to fix this. BEWARE! You will lose all your data!
    Switch off your phone, hold Volume Down, Power, Camera buttons down. Switch phone on. As soon as it vibrates, release Power button, keep Volume Down and Camera button pressed for a few seconds.
    I have the same problem and after going through all the various support sites- Nokia, O2, and endless forums I was told the same thing "Make sure your auto-update for date and time is switched to automatic" But after telling them I don't know how many times that my Lumia 800 didn't have this option, only a 24 hours switch I was told there was nothing that could be done. However I appear to have sorted it out myself. The problem appears to be (or on my phone at least) is wi-fi connection, before I turn my phone off I have to disconnect from wi-fi and when I turn the phone back on the date and time stays corrected.
      When I set the date and time manually (for the 3000th time!!) I held in the power button until the slide down close screen disappeared then released it and the phone restarts, then I done it again- same proceedure just to be sure and ever since the date and time has stayed correct. BUT BE SURE TO TURN OFF WI-FI BEFORE SWITCHING PHONE OFF. Hope this helps

  • E66 Loses date and time.

    I set an alarm for work days. I switched the phone off with the alarm set.
    The alarm did not ring, but the display light flashed a couple of times at the approriate alarm time and then nothing .. No alarm.
    I swithced the phone on, it immediately asks for the date and time !!
    After entering the date and time the alarm then rang !!
    This is not an issue of the wrong or silent profile being set on the phone, the phone just lost its marbles and didn't know what the date or time was anymore.
    I don't find any microcode update yet, I'm on version 102.07.81 (date = 12/07/2008)
    For a business phone at this price I find this problem rather astonishing, I see in other threads I'm not the only one to suffer this issue ...

    I have the same problem with my E66 (as I also had with three different E51s) that the date got a hick-up during the weekend. When I turned it off on Friday evening it would say Friday, but when I turned it on on Saturday morning it would still say Friday. Apparently as software glitch for several models here. Hope Nokia fixes this soon.

  • How can i change date and time after importing a file

    hello
    i'm importing AVI files first in iMovie because Final doesn't support (other question i put in) but when i see the scenes form 1993 they have the date 2004.
    i believe 2004 is the date i put them on the computer.
    Now i looked in the help files Final Cut Pro but cant find anything to adjust the date and time.
    it works well in iMovie using the help files:
    Right-click the clip you wish to edit and click Adjust Clip Date and Time from the menu that appears. Or click on Archive and than adjust date and time
    But as i said i cant import the files in FCP have to import them to  iMovie files adjust the date and than import to Final Cut Pro but than de changes i made to the date and time  are gone and in FCP 2004 is again the date of the file!!!
    Question how can i Change in Final Cut Pro the date and time in a same way as iMovie does?
    Jemajoro

    OK, I think I understand what you are saying but it still does not look like it is doing it as you describe.
    Here is another screen shot.
    Note that all clips in "2007 August" event have the date of Aug x, 2007.
    Yet, the event "2007 August" still shows up under the 2012 "folder" (is that the right terminology?).
    The newest clip in this event is Aug 31, 2007 so shouldn't it be categorized as 2007 and not 2012?
    I think you know this but I am using the following feature:
    Go to the sprocket icon under the events.
    Select "Group events by date" and then by "group events by year and month"
    Thanks again for all the help

  • Resetting the date and time after the phone has be...

    Hi,
    I keep having to reset the date and time very time I turn my phone off. I was thinking it was to do with the battery so I fully charged it, turned it off then turned it on again and it asks me for the date and time.
    I only noticed this because I've had exams and I have to turn my phone off for them.
    Could it be a dying internal battery?
    I know with computers there's a BIOS battery that controls date and time. When they start to die the date and time are inaccurate.
    I'll have to find time to take it to the 3-Mobile shop either on Sunday or sometime next week if it is an internal battery problem.
    Thanks,
    Omar
    "A Jade stone is useless before it is processed; a man is good-for-nothing until he is educated."

    Hi omar3256
    I believe that there is a very small component on the motherboard which serves this purpose, although whether battery or sort of capacitor I am not certain. The N80 especially seemed to be prone to this failure.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • HT1551 Stuck on "setting date and time" after a system upgrade

    I have tried everything recommended including disconnecting power. Just keeps churning on setting date and time.

    I believe this is a connectivity issue.
    First, make sure you're connected properly via either wi-fi or ethernet.
    When setting up Apple TVs for my school district deployment, we had this issue with units connected via Wi-Fi.  We resolved this problem by creating firewall exceptions.
    If you're setting up a unit for home, you could try creating exceptions in your router for the Apple TV.  Alternatively (to test), you could set your Apple TV as the 'DMZ' device which should expose it sufficiently to see if your networking is getting in the way.

  • Updating date and time after closing notification thru FM 'STATUS_UPDATE'.

    Friends,
    My requirement is to update certain closed notification.
    Before opening a closed notification, the field QMDAB and QMZAB ( Closing date and closing time ) are present in the table QMEL with some values.
    Now i open this closed document thru my program, by updating values in JEST table, then change the notification thru another function module, and then close it again by reverting the changes done in JEST table.
    I am using the function module 'STATUS_UPDATE' to make the changes in JEST table.
    Now my problem is, though the notification gets closed after using 'STATUS_UPDATE', the closing date and closing time do not get updated in the database table QMEL. They become blank.
    I am using the function module 'IQS4_GET_NOTIFICATION' and IQS4_MODIFY_NOTIFICATION to make changes in notification.
    Kindly help.

    Hi,
    Your problem is that, after changing the notification status through the function module "STATUS_UPDATE" , field QMDAB and QMZAB ( Closing date and closing time ) are not updated in the table QMEL
    i am also facing the same problem.
    did you get the answerd for your problems ?
    can you please tell me, what you did, to solve your problems.
    can you please share your answer with me?
    you can contact me also if you wish
    duraisamy .  dhanaraj at accenture . com
    Manythanks
    Duraisamy

  • Saving chart data and reload after restart of server?

    Hi
    I have a vi that communicate with another program called EES through DDE and sometimes EES mess up the server. My solution is to automatically restart the server once a day [this is good enough for me].
    My question is: How do I get all my data in my charts to save and reload easiest?

    Hi,
    I think you may create a database table in your server and then pass your data to this table every time a new entry is made and calling the same from the database every time you run the VI after its restart. This can easily be done using the database connectivity tool-kit in the function palette. 
    Regards,
    Nitz.
    (Kudos are always welcome)

  • How to concatenate date and time after a logical file in application server

    Hi Experts ,
    I have a requirement that goes like this : I have a job that runs parallelly with 10 different variants at the same time. Each job will write the data into a file in the application server, since the jobs run parallelly there is a chance of the file being over-written and hence we have decided to concatenate time and date at the end of the file so that the file does not get over-written. Can someone please let me know how to incorporate this change.
    Thanks & Regards,
    Balaji.K

    Hi Balaji.
    Use CONCATENATE functionality.
    A sample code snippet for your reference :-
    CONCATENATE  p_path  text-202 c_9 p_name c_9  lv_fcount  c_9  lv_date
                                                 c_9 lv_time  INTO  gv_file.
    Regards
    Abhii

  • Renaming a file to date and time after unziped

    I have a google earth kmz that is downloaded to our root directory. I am wanting to see how to rename this file after it is droped into our directory. Here is what I have so far.
    <cfif FileExists("#expandpath(".")#/temp.zip")>
    Got it .... extract....<br />
        <cfzip action="unzip" file="#expandpath(".")#/temp.zip"
        destination="#expandpath(".")#"
        overwrite="true">
        </cfzip>
    Right now the code above unzips the file and places the KMZ in the root drive. I wanted to rename the file the current  date like as follows RT_2010_03_17_12_00.kmz
    I have no idea how to accomplish this.

    The <cffile action="rename"...> is what I would look at using.
    http://livedocs.adobe.com/coldfusion/8/htmldocs/Tags_f_09.html#1098668

  • Frozen on setting date and time, tried restart and reset.

    Purchased my atv a year ago and I'm having problems with getting it to work. It's stuck on the settings screen, I've tried everything from unplugging, to resetting and restarting. Does anyone have any other ideas.

    Hi allan93,
    It may be worth restoring the Apple TV to factory settings.  This article describes how:
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    http://support.apple.com/kb/HT4367
    Cheers!
    - Ari

  • Date and time loss

    k7n2delta2 mobo constantly loses date and time settings every time the computer is restarted. Ive changed the battery. but it didnt help. this has been going on since i bought the mobo 2 years ago and i would just adjust it as i needed now im fed up. anyone hear of this before

    Quote from: Fredrik on 19-October-08, 22:48:15
    Save&Exit after the changes in BIOS.
    Make sure the CMOS jumper is in the save/hold position.
    I checked the BIOS & jumper settings, they are all good. And yes I change the date and time in windows. The problem is that after the pc is shut down for any long period of time ie. over night, the settings are lost. A simple restart doesn't cause any problem at all. When I get home from work tonight Ill remove the new battery that i installed and check it for charge loss.

  • Help on Date and Time

    How come everytime I plug in my iPod onto the computer, my Date and Time Settings on my iPod always reset to a random date and time?

    Having same problem on two different iPods with two different computers here since last update. Am having to manually change date and time after each sync (very annoying) am hoping it will be fixed soon.Both computers are set with correct date and time and iPods are both reverting back to a date in October (I think)

Maybe you are looking for

  • Down Payment Request in PO

    Dear All, User has created one material purchase order with 2  line items in it. Net-value of each the line item is Rs 10,000 that means total PO value is Rs 20,000. No tax codes and other conditions are entered. In PO header, in the tab of 'Payment

  • Imported photos and got duplicates - how to identify and remove duplicates?

    Hi all, I am running iPhoto '08 and it has worked very well. Yesterday, I imported a folder containing photos and I knew that some of the photos already existed in my iPhoto Library. But not concerned, when I know that iPhoto will detect duplicates.

  • Problems with Itunes shuffle

    Whenever shuffle is on, the songs don't advance. In other words, I'll play a song, it will finish and instead of advancing to a new song somewhere in my library, the song which just played still shows (and reads 0:00) and the playbutton remains depre

  • IPhone Remote crashes Apple TV

    0. Make sure iPhone/iPod Touch is not on the local wireless network. 1. Turn on television. 2. Turn on Apple TV. 3. Use Apple TV's remote to begin playing music. 4. Turn off television. 5. Bring iPhone/iPod Touch onto the local wireless network. 6. S

  • Vision install

    Does anyone know if I can do two node or multi node installation for Vision database ? We have done single-node installation before, but are not sure if it is configured for multi node. Your input will be greatly appreciated.