Losing a letter in my URLs

I am having a problem where I have a button and when it is
pressed it is supposed to open a file in a directory, but for some
reason it is removing the first (h) from each word. I have tried it
on two computers running separate versions of flash and the same
result. Please help!!

this is not a proper way to open a local file
try this product:
http://www.flashjester.com/?section=tricks_jtools_jstart2

Similar Messages

Problem with letter case in URL

I know that some servers distinguish the difference between
www.website.com/Contact
and
www. webstite.com/contact
Unfortunately even if I click the 'Contact' link or copy it to the address bar, Firefox always interprets this as 'index' and the page is redirected to the main site on that server.
What can be done to overcome this?

Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

I have lost the dialogue box at the top of the screen that lets you input URLs.

Firefox is fine on my laptop but on my desktop I went through a routine attempting to remove the Yahoo toolbar. I was able to do that but now I have an issue with my desktop settings for Firefox. I only have the "search" box and do not have the dialogue box that allows me to type in a website address. Thanks.

Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
* If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.

HOW TO CONSTRUCT THE URL WITH INTRADOCUMENT LINKS (#...)?

I have a url and i want to access or construct the full URL in jsp without losing the # links in the url. If I make a call to the URL lets say using the below mentioned way. when I issue the request.get... Methods to construct the URL inside the JSP page the #doclink were lost. The issue I have is people who have bookmarked a page like this should be automatically taken to that part of the document where the intra document link is define (or book mark link) using anchor tag.
Is there any method or technique available to get the full url including the #doclink
http://www.blahblah.com/blah.jsp?pg=/path/otherpath/blah.html#doclink
is there a way to do it.
You help in this regard will be greatly appreciated
Thanks.

Hey thanks for your reply, I want how can I retain the #doclink in a JSP page without losing it when someone types something like the below mentioned in the browser address bar. If they have bookmarked it this way, this is the way the browser is going to make the request.
http://www.blahblah.com/blah.jsp?pg=/path/otherpath/blah.html#doclink
So, inside the JSP page, getRequestURL, getRequestURI, and getQueryString, helps me reconstruct the URL but the #doclink gets missed. I can use the URLEncoding when it's inside the HREF or something, but when called from a browser the above way, I cant do anything really.
Your help is greatly appreciated.
Thanks a lot.

Safari won't restore window/toolbar/URL/search bar

HI all,
I have a very baffling situation. We have MacPro 2010 on 10.8. recently my son complained that his Safari doesn't work. I looked at it:
1. open Safari, and you get the menubar, but no browser window
2. under the menu-->windows, I find "untitled". when I click on "untitled" a window shows up with just the "home" icon and the homepage. no other toolbar. "cmd-L" won't let you type URL. no search bar either.
2a. tried "Reset Safari" no change
3. I tried changing the toolbar to default (with the address/search icon) through "customize toolbar", but no go
4. deleted .plist, ~/Library/Safari still won't recover the standard window
4a. after deleting .plist ~/Library/Safari, I rebooted the machine. no change
5. when I open a new window, nothing shows. but it lists additional "untitled" window under menu-->window
on all other accounts on the machine, the Safari works fine.
right now I'm accessing the web using Firefox.
how does one COMPLETELY reset Safari? if I can avoid deleting ~/Library that would be good. but if that is what it will take, I'll do it.
it's annoying how apple seems to hide application support files that it is no longer contained in the ~/Library/Preferences, etc file. (ran into ghost iCal stuff that will keep resurrecting itself!)
I'm very savvy with Terminal and other UNIX commands. so willing to try things.
thanks for any help!

The culprit may be a Safari extension or third party plug-in ...
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If that didn't help, Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

Load url into!! the swf file

can i load a url into a continer on a stage (into the swf)?
i need to let users lunch url in the application without open
a new window or somthing like this...
it needs to load into a continer or somthing like this?
i know to load swf with swfLoder, i need the same thing only
to load any URL (insdate of wsf only)...
can you help me?

Flex does not support the direct display of URLs. Flex does
have some capability to display HTML, but it sounds like it would
be too limiting for your use.
Check this out:
http://coenraets.com/viewarticle.jsp?articleId=95
Christophe wrote this for Flex 1.5 but it might work for Flex
2.

Safari hangs on URL starting on D

As said in the subject, my iPhone hangs when I type URL's starting on 'D'. Very strange bug!
All other characters works fine and so do 'D' if it isn't the first letter in the URL.
I had this bug with 2.1 and have just upgraded to 2.2 and the bug is still there.
Similiar experience, or even better a solution to this problem ?
Message was edited by: Yttis

Try clearing the Internet history under +Settings > Safari > Clear History.+ My guess is that Safari is trying to autocomplete your URL, and the history file is corrupt.

URL object syntax error - please help!

Hi,
I am trying to add sound to my applets, i am using the URL object and declared an new object called mysong etc... Java compiler is not letting me assign url vale to my object "mysong" code is below for reference:
code:
// Use the absolute URL of the sound file
URL oursong = new URL;
oursong = "http://www.servername.net/media/sound.mp3";
AudioClip a = getAudioClip(oursong);error desc:
/tmp/4230/spaceinvader.java:186: '(' or '[' expected
 URL oursong = new URL;
 ^whats the correct syntax for what im trying to do? - Thank you very much...

oh, just to clarify some more. I tried doing this change to the source:
URL oursong = new URL("songname.mp3");
well this time i got this error:
/tmp/8154/spaceinvader.java:186: unreported exception java.net.MalformedURLException; must be caught or declared to be thrown
 URL oursong = new URL("songname.mp3");

URL in RSBBS is transfered wrongly

Hi Guys
Require quick help from any one of you.
In RSBBS Tcode i want to enter an URL to jump to external url. i change an URL ending with ! mark. and this ! mark should continue with the url with out any gap between the last letter of the url and ! mark. i write the URL, the last letter of URL continued with ! mark.
But after the tranfer the chnages it is showing the URL ending with a gap and followed by ! mark. Not able to figure out why is it happeng this way.
It will be great if any body can come up with quick reply.
Thansk & Regards,
Rohini

Try to check the following:
http://help.sap.com/saphelp_nw04s/helpdata/en/45/e5ab04810473b1e10000000a11466f/frameset.htm
Cheers.

SharePoint 2013 multi App domain issues

Hello,
All urls on purpose have a space character, this is because the forum didn't let me enter URLs.
We have a problem with the new feature of SharePoint 2013 March PU “New-SPWebApplicationAppDomain”.
We are implementing this feature for a client in Windows Azure. This lead to several technical issues to overcome and in previous LAB tests it seems that we have overcome these problems, using named binding instead of wildcard, and SNI.
Goal:
1 Webapplication with three zones:
Default zone: https: //portal-ntlm.contoso.com
Intranet zone: https: //portal-adfs.contoso.com
Extranet zone: https: //portal-fba.contoso.com
Default zone in NTLM of course is to make Search work.
With the new feature described in http ://technet.microsoft.com/en-us/library/dn144963.aspx we should be able to get App Domains working on all three (or at least two out of three zones).
In my LAB (Single server farm, running SP2013 SP1) I currently configured two zones, both NTLM to test the basics.
Default zone: https: //portal.contoso.com Intranet zone: https: //portal-ta.contoso.com
I have enabled the feature using these commands:
$contentService = [Microsoft.SharePoint.Administration.SPWebService]::ContentService
$contentService.SupportMultipleAppDomains = $true
$contentService.Update()
Iisreset
Then I do this:
New-SPWebApplicationAppDomain -AppDomain app1.fabrikam.com -WebApplication https: //portal.contoso.com -zone default -port 443 –SecureSocketsLayer       (This command works)
and then:
New-SPWebApplicationAppDomain -AppDomain app2.fabrikam.com -WebApplication https: //portal-ta.contoso.com -zone intranet -port 443 –SecureSocketsLayer   (This one doesn’t)
Then we get this powershell error in RED:
New-SPWebApplicationAppDomain : The IIS Web Site you have selected is in use
by SharePoint. You must select another port or hostname.
At line:1 char:1
+ New-SPWebApplicationAppDomain -AppDomain apps2-ta.talentenik.nl
-WebApplication ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : InvalidData: (Microsoft.Share...cationAppDomain:
   SPCmdletNewWebApplicationAppDomain) [New-SPWebApplicationAppDomain], Argum
entException
    + FullyQualifiedErrorId : Microsoft.SharePoint.Administration.SPAppCmdlets
   .SPCmdletNewWebApplicationAppDomain
Extra info:
I have tried using a single IP, multi IP, remove current IIS Binding, add the binding already etc. Nothing seems to work.
When I change the PORT number of the second command to anything else it binds to the expected IIS Site but on the wrong port nr.
The most strange thing also: I have a working set of VMs that actually works. I created a snapshot of the working situation. Reverted back to the before snapshot and tried to replay my steps but I keep running into issues when I try to add the second app-domain.
Can anyone help me set this up.
Thx
Stefan Peters

I was in the same situation with my on-premises environment. I did a little bit more investigation and checked the code behind New-SPWebApplicationAppDomain. I wrote a full article about this issue
http://www.vioreliftode.com/index.php/new-spwebapplicationappdomain-the-iis-web-site-you-have-selected-is-in-use-by-sharepoint-you-must-select-another-port-or-hostname/
I also provided a way to bypass the limitation and be able to reuse the 80 and 443 ports for multiple app domains.

IMac sometimes beeps endlessly after wakeup

I'm not very familiar with Mac computers, though I'm very experienced with Windows computers, so I might overlook or misunderstand things obvious to someone more familiar with Macs. I'm helping a less technically-oriented friend with her Mac. I'm not sure I have all the information that is needed, but let's try.
The computer is a fairly old one-piece iMac. The "About" choice under the Apple menu says it is an iMac 5,1 and SMC version (system) 1.8f2. The current OS is 10.6.8. I believe the original OS was one of the 10.4 versions. The computer originally used a wireless keyboard and wireless mouse, both from Apple. Sometime after the upgrade from 10.4.x to 10.6.8, the wireless keyboard and mouse were replaced by a wired keyboard and mouse. There is an HP inkjet printer connected to the computer. The owner of the computer is not certain of the timing, but believes the beeping that is the subject of this post started after the switch to the wired keyboard and mouse, but she admits that it might have started before the switch. She is confident that it started sometime after upgrading to OS 10.6.8. She was told by the staff at an Apple Store that she needed to upgrade to OS 10.6 in order to use Skype, or some new version of Skype (I am not sure about that reason).
The problem is that, at times, the computer will emit one beep or a series of beeps (the owner sometimes calls them clicks, but I have heard them and would use the word "beep"). The owner has reported only one situation in which a single beep occurs. Usually, it is a repeating series of beeps, each of the same duration (about half a second or maybe a little less, I'd say) and with a uniform interval between them, though I can't say whether the interval between the beeps is the same as the duration of each beep.
The beeping usually starts immediately after the computer wakes up from the sleep state (done by pressing a key on the keyboard). The owner usually puts the computer into the sleep state when she is done working for a while by selecting Sleep from the menu. I imagine it sometimes goes to sleep on its own due to exceeding the configured time of inactivity, but I have not asked her that. Sometimes the beeping does not start immediately after wakeup, but when a folder on the desktop is opened. When the computer is emitting a series of beeps, the beeps usually can be stopped by opening Safari and starting to type a URL. Typing the first letter of the URL stops the beeping. The owner is not sure whether starting any other program also can stop the beeping. If the beeping started when a folder was opened, usually closing the folder makes the beeping stop. The owner says that she thinks opening a folder containing Word files causes the beeping (though that does not trigger beeping all of the time), but most of her folders contain Word files, so I'm not sure it actually is necessary for there to be Word files in the folder to trigger the problem.
When the computer is emitting the series of beeps, the owner reports that the menus respond differently than normally. She says that, normally, when she clicks on a menu, it stays open while she makes her selection from it, but when the computer is beeping, she must hold the mouse button down while selecting her choice, else the menu will close.
The beeping does not start after every wakeup, but once it has started beeping after a wakeup, the beeping starts at all subsequent wakeups until the computer is shutdown. The owner does not know whether a restart rather than a shutdown also stops the beeping after wakeup. When beeping occurs after a wakeup and has been stopped by starting Safari, the owner believes that the computer does not resume beeping again until it has been put to sleep and is awakened again.
The owner has not had the computer start beeping right after being turned on, however, it sometimes does emit a single beep when the first letter of the user's password is entered into the logon dialog box. This single beep did not occur on a test of using the logon dialog after logging off without shutting down. (The owner does not usually log off, but I had her try it just as an experiment to see whether the single beep would occur when logging on in that situation.)
Possibly related is that there have been times when Word documents will not open. The owner mentioned that when this happens, if she hovers the pointer over the Word icon in the dock, she gets a choice to force quit. I believe she said that using the force quit restores normal operation of Word. There also has been at least one case in which Safari refused to close. I don't know how common this sort of stuck program is in a normally-operating Mac, and I don't know how often it occurs on this Mac.
When I was observing once, when I asked the owner to log off, the logon dialog box proceeded to shake rapidling left and right a small distance (perhaps a centimeter or so) while the computer emitted a series of beeps different from the other series of beeps I described. This series of beeps had two beeps in rapid succession, followed by a longer pause, two beeps in rapid succession, longer pause. This repeated until a key was pressed. The owner has seen that occur only that one time, but she does not normally logoff while leaving the computer running.
We have uninstalled and reinstalled Office (including all the updates to make it current). We have verified that Bluetooth is not enabled, that the old Bluetooth pairings have been deleted, and that the batteries have been removed from the wireless keyboard and mouse. We have reset the PRAM and the SMC. We have run the Apple Hardware Test and it found nothing to report. We have disconnected and reconnected all of the cables (keyboard, mouse, printer, ethernet). The problem of the endless beeping after wakeup sometimes still occurs.
I imagine the next logical thing to try is to reinstall Mac OS. The owner is a bit reluctant to try that. She does have copies of her personal files on CDs, but she is reluctant to undertake reinstalling the applications. Reinstalling the OS without erasing the hard disk probably would be less disruptive, but is there much chance that would eliminate the beeping? My guess is that something in the software somewhere has gotten messed up, and a completely clean installation would be the only way to guarantee to clear it up. Am I discounting the chances that just reinstalling the OS could fix it?
My feeling is that this is a software problem, not a flaky piece of hardware, but is that justified? If it might be a hardware problem, which part of the hardware might it be?
At one point, I had an idea that there is some software remnant of the wireless keyboard or mouse software still active that sometimes causes fake input that triggers the beeping. However, I don't know enough about the Mac to know whether that is a reasonably likely possibility, and, if it is, I don't know what to do about it.
All suggestions for clearing up this beeping problem will be accepted gratefully. Suggestions of other experiments to try also are welcome.
If we do decide to try a clean install of everything, should I first install the OS from the original discs that came with the computer, then upgrade using the OS 10.6 discs, or should I just start with the OS 10.6 discs?

Hello, excellent work so far!
It doesn't sound like this much, but including for pondering...
The following table lists the new tones and their meaning:
Tone(s)          Description
1 tone, a 5-second pause, repeat          No RAM installed
3 successive tones, a 5-second pause, 3 successive tones          RAM does not pass data integrity check
1 long tone when holding down the power button          Firmware upgrade in process. See About firmware updates for Intel-based Macs for more details.
3 long tones, 3 short tones, 3 long tones          Firmware restoration from CD in process. See About the Firmware Restoration CD (Intel-based Macs) for more details.
http://support.apple.com/kb/HT2538
Can you count the beeps or flashes?
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
It sounds more like some Hardware issue at the moment, but only by a slight margin.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

How to go from a View Controller to a View Controller

Hey everyone, I have asked this question over on Stack Overflow, and really had no luck with it.
     I am wondering how to go from one (1) View Controller that has buttons and another View Controller that has a UIWebViewer in? I know how to do the simple part to get the two to link up. But, the buttons are going to have different URL's hooked up to them, and I want to be able to reuse the Web Viewer. I am using the Swift Programming language to be able to do this.
below is my current code that is has my buttons sitting on top of my web viewer,
import UIKit
import WebKit
class ViewController: UIViewController {
    @IBOutlet var wbView: UIWebView!
    var strUrl = ""
        @IBAction func buttonAction(sender: UIButton) {
            switch (sender.tag){
            case 1:
                strUrl = "https://www.google.co.in/"
            case 2:
                strUrl = "https://in.yahoo.com/"
            case 3:
                strUrl = "https://www.facebook.com/"
            case 4:
                strUrl = "https://bing.com/"
            default:
                break;
            reloadWebViewWithUrl(strUrl);
        func reloadWebViewWithUrl(strUrl: NSString){
            var url = NSURL(string: strUrl);
            var request = NSURLRequest(URL: url!);
            wbView.loadRequest(request);
        override func viewDidLoad() {
            super.viewDidLoad()
            // Do any additional setup after loading the view, typically from a nib.
        override func didReceiveMemoryWarning() {
            super.didReceiveMemoryWarning()
            // Dispose of any resources that can be recreated.
How should I go about changing this two allow my buttons to be in their own ViewController and still be able to to the secondary View Controller with the WebViewer?
Thank You all in advanced with the help on this!

This is the FirstViewController Code
import UIKit
class FirstViewController: UIViewController {
    @IBAction func webAction(sender: UIButton) {
        let index = sender.tag
        chosenURLString = addresses[index]
        performSegueWithIdentifier("WebViewSegue", sender: self)
    override func prepareForSegue(segue: UIStoryboardSegue, sender: AnyObject?) {
        if let controller = segue.destinationViewController as?
            SecondViewController {
            controller.urlString = chosenURLString
            chosenURLString = nil
    private let addresses = ["", "https://www.google.com", "https://www.facebook.com", "https://spca.org", "https://www.facebook.com/wagzpack?fref=photo"]
    private var chosenURLString: String?
This is the SecondViewController Code
import UIKit
class SecondViewController: UIViewController {
    @IBOutlet var webSite: UIWebView!
    var urlString: String?
    override func viewDidLoad() {
        super.viewDidLoad()
        if let urlString = urlString {
            if let url = NSURL(string: urlString) {
                let request = NSURLRequest(URL: url)
                webSite.loadRequest(request)
                println("loading \(urlString)")
            else {
                println("badly formed URL string.")
        else {
            println("missing URL string.")

TS1490 i am running Windows Home Server 2011 and iTunes can't seem to connect to the iTunes Store nor run Genius on my Library. What do I need to do?

I am running Windows Home Server 2011 and have installed iTunes on my dedicated server, attached to my router. I can't connect to the iTunes Store nor run Genius on the server ONLY (iTunes runs fine on by two other PCs and my Apple TV and I share the libary that resides on the server). I am running a very current version of iTunes 64 bit. I have run the connectivity test and it failed.
My guess is that there is some setting in the Server software that i need to change to let iTunes access urls or computers on the internet. Does anyone have any experience with this software combination?
Thank you

Some guy managed to get this to work. The following link is for iTunes 10.5 but it should work for the current release.
http://social.microsoft.com/Forums/en-US/whs2011/thread/bd62ee3d-a933-4cad-ae9b- fd38adc994c0
Good luck!

How to display PDF in JSP using Iframe

Hi All,
I am using Struts 2. I am building my file in ActionClass with seperate Method like getGeneratedPDF() in which, I am setting header of response and writing into PDF.
This method will be called from JSP by this way
s:property value="getGeneratedPDF()" />
But It displayed Junk Characters , and this PDF is not static (already Generated). It is generated and build on Fly.
I have 2 questions 1 -- How to display PDF in JSP in proper way without Junk Character in it?
questions 2 -- How to display it in Iframe?
Please help me , If you know the solution.
Thanks in Advance,
Jimmy

jamy_26 wrote:
But It displayed Junk Characters , and this PDF is not static (already Generated). It is generated and build on Fly.A PDF file is a binary file, not a text file, and you're trying to display it as String. Of course you would get "junk characters". Have you ever tried opening a binary file (pdf, doc, jpg, xls, etc) using a text editor like Notepad?
I have 2 questions 1 -- How to display PDF in JSP in proper way without Junk Character in it?Display it as binary stream, not as text stream. You can display it standalone, just let the link/form/addressbar URL point to some Servlet which writes the InputStream of the PDF file to the OutputStream of the response, along with a correct set of response headers (at least content-type, content-disposition and content-length), so that the browser can open it in the correct application (which is usually Acrobat Reader). If you want to embed the PDF file in a JSP, then one of the ways is indeed using the HTML <iframe> tag.
questions 2 -- How to display it in Iframe? Just let the iframe URL point to the aforementioned Servlet.
You can find here an example of a generic file servlet, you may find it useful to get the idea how to do it: [http://balusc.blogspot.com/2007/07/fileservlet.html].

Google Calendar doesn't show

Please Help! I have inserted a Google Calendar(iframe html code) into one of my iweb pages but it doesn't show in Safari. I get an error in the Activity window that says "too many http redirects" if I refresh Safari a few times it works although it works fine in Firefox. Is there something wrong with the Calendar html code? Is it my webhost? or possibly Safari?
Thanks,
Flippy
Mac OS X (10.4.8)

Ah-ha! I figured it out. When you are generating the Html code for your Google Calendar (located under Calendar Settings/Calendar Address/Configuration Tool) do not put too many spaces between the letters and words in the "Calendar Title" as I did C A L E N D A R - O F - E V E N T S.
It made the url to my Calendar look like this:
http://www.google.com/calendar/embed?src=mygooleid%60gmail.com&title=C%20A%20L%2 0E%20N%20D%20A%20R%20%20%20-O%20F-%20%20%20E%20V%20E%20N%20T%20S
Notice the %20 before each letter in my url causing to many http redirects.
So I just changed the Title to something like EVENT.
The url looks like this now: http://www.google.com/calendar/embed?src=mygoogleid%60gmail.com&title=EVENT
I added the newly generated html code and it works like a gem.
I hope this is helpful to anyone else who might be having the same problem.
Flippy

Losing a letter in my URLs

Similar Messages

Maybe you are looking for