Losing audio when exporting from imovie to real player

I've been trying to export imovie to real player- the video goes across fine, but there is no audio. And i can actually export audio to real player by itself and it plays fine.
So video or audio fine; but i can't seem to get them both!
I'd be very grateful for any help or tips.
Cheers,
Will

Is CS5 patched to 7.0.4?
Is the image on a master page?
Is it visible when you switch to Preview mode?

Similar Messages

No audio when exporting from iMovie

I am trying to export my HD movie from imovie in HD size format 1280x720, when I do I am not getting any audio. Is there something that I am missing, a mute check box or special setting? I have looked everywhere but just cant figure it out.

This is speculation on my part so take it with a grain of salt.
But first you have to realize that iMovie renders the entire movie, effects, music, transitions, photos, etc. in one pass. If you use Final Cut Express or Final Cut Pro, you can render a sequence, or render a nest of sequences. You can create a much longer movie this way without taxing your machine.
Secondly, the Intel architecture has a graphics processor that offloads a lot of the heavy lifting to a video chip or video card. On a PowerPC (RISC) architecture, everything goes through the CPU.

Distorted Audio when exporting from iMovie 11

In iMovie 11 the edited movie sounds fine. But when the movie is exported to the media browser or Vimeo, the audio is distorted. It sounds like gain has been set way too high. I have used this version iMovie a lot and have never encountered this problem. Ideas?
--John

This is speculation on my part so take it with a grain of salt.
But first you have to realize that iMovie renders the entire movie, effects, music, transitions, photos, etc. in one pass. If you use Final Cut Express or Final Cut Pro, you can render a sequence, or render a nest of sequences. You can create a much longer movie this way without taxing your machine.
Secondly, the Intel architecture has a graphics processor that offloads a lot of the heavy lifting to a video chip or video card. On a PowerPC (RISC) architecture, everything goes through the CPU.

No audio when exporting from mpeg to flv

We have two PCs with Premiere Pro and AME installed, and just upgraded to CC. On one computer exporting works fine, on the other one, I'm losing the audio when exporting from mpeg to flv. I have used the same preset as on the other computer (that works) and also tried other presets that came with AME.
I can't figure out why this wouldn't work on one but works fine on the other? Anyone who knows?

How are you determining that the FLV has no audio? Are you playing it back in VLC Player or importing it into Flash?
Also, do you see a full range of formats on the system where you don't hear audio? If some formats are missing this might be a licensing issue. Also check if AME recognizes audio on the MPEG source (hover over it in the queue and look for audio info in the tool tip).

IDVD Stops Responding when Exporting from iMovie

I'm using iDVD and iMovie (from iLife 06 and fully up to date) on a MacPro (also up to date on all software, MacOSX, Quicktime etc).
This proceedure has worked before several times but now results in a non-responding iDVD every time I try it, including an archive and re-install and a complete new install of OSX and all software on a new partition.
What I'm doing.....
[1] Recording a TV programme on EyeTV (410) and exporting it to iMovie - sucessful every time
[2] Edit the iMove project and add chapter markers and save project - no problem.
[3] Export to iDVD - iDVD shows exporting in progress and whilst this is still showing iDVD launches
[4] iDVD starts playing the music from a std theme for a few seconds and then stops. Then resumes the music after resizing the window and then after a couple of more seconds freezes. From the Dock I can see that iMove and iDVD are "not responding"
[5] Eventually iMovie completes it's "export" and then starts responding normally. iDVD continues to show as non responding although I can move the window around the screen. I have to force quit iDVD to get it to close down.
I have tried:
Re-exporting the project from EyeTV
Deleting the preferences files for iMove and iDVD
Deleting the iLife suite and re-installing
Doing an OSX archive and re-install
Installing a fresh OSX (10.4.8) on a different drive and installing fresh software
Running Disk Utility - clean bill of health on both drives
Repaired permissions
The Console reports the following errors when exporting from iMove to iDVD:
===== Tuesday, 24 October 2006 22:56:45 Europe/London =====
[KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 0
[KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
[KN,10:57:11:968]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
2006-10-24 22:57:53.394 iDVD[424] NSExceptionHandler has recorded the following exception:
NSInvalidArgumentException -- * -[NSCFArray addObject:]: attempt to insert nil
Stack trace: 0x954ee243 0x9264f2cb 0x9264f110 0x925dd399 0x000df708 0x000df806 0x00215e6d 0x002167ef 0x0021470b 0x001a0b4f 0x00184105 0x92627d78 0x92627222 0x92626fa9 0x92626811 0x92621ae0 0x00166dc7 0x9261e861 0x925f2ef1 0x925f2d1b 0x9151d6c5 0x9151d5f6 0x9151d4c2 0x92dda340 0x9325c63d 0x9325c056 0x93255ddb 0x93249d2f 0x0000ad5d 0x0000ab36 0x0000aa51 0x00000002
Result - problem persists. I'm at a loss as what to do next. Any suggestions greatfully received.

Yes, tried that when I deleted the preferences. Disk Utility did not report any permissions needed repairing.
What really mystifies me is that this export to iDVD did work once and I expected it to resume once I'd created a fresh OSX install along with all the iLife apps on a new partition, but it remained the same!
Perhaps there is some sort of other software conflict going on? I have Adobe CS2, MS Office, Toast and FMP installed all are latest editions. On the utilities front I have installed Stuffit Deluxe, Internet Cleanup, Contour USB controller for video editing and a LogicTech wireless trackball. Again all the drivers are the latest releases.
Does anyone know if there are any preferences associated with the other not responding applications listed in my other post that I could try the delete-reboot trick on?

When exporting from Imovie I get the following error? OSStatus error -2009

when exporting from Imovie I get the following error? OSStatus error -2009

Hi
Apple Support pages says.
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
Yours Bengt W

Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration. Why?

Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration. Why?
I have a file created by digitizing an 8mm film at a rate of 24 fps. I would like to create a downloaded movie at a frame rate of 15 fps. The Export using Quicktime option seems to provide that capability but the resulting file has the same duration as the original 24 fps file. How can I get the exported movie to be slowed down?

joegez,
There is a feature you can use to slow down the video. In the project, move the mouse pointer over the clip, then click the gear icon. That brings up the Inspector. Click the Clip tab. Then you will see a feature there called Speed. Move the slider to the left to slow down the clip. Or you can enter a percentage in the box on the right.
Hope this solves the problem for you.

No sound when exporting from imovie 3,03

After having read most of the posts related to sound troubles, I still can't figure out why I can't get any sound when I export from imovie 3,03.
I almost know the entire dan slagle site, and checked every button to play with, I've tried many export or preferences settings (including various depths or rates) but got no result at all.
Surprisingly, when I grab the .mov file to some converters (ffmpegx), the expected audio part looks to be there, but remains silent (for me, meaning all of the bits at 0).
Don't hesitate to require additional info - thanks to prompt answers
G5 2xPPC Mac OS X (10.3.9)

hurrah !
i just downgraded QT 7.x to 6.5.2 and it worked fine at last.
From the informations I've gathered, DO NOT RUN QT 7.x WITH OSX 10.3.9
For those who would follow the appropriate steps to get rid of v7, go to : http://fox-gieg.com/tutorials/2005/undo-quicktime-7/
and don't miss : http://www.charlessoft.com/
Thanks a lot to Brie Fly for its so helpful comments.

Idvd pixelated when exported from imovie

DVD looks great on imac but dvd is pixelated once exported from imovie and put on dvd using IDVD.
Any suggestions

Welcome to the forums, Alison.
I'm not a GarageBand user, but couldn't you export the GB audio tracks as a Quicktime file, and then import that audio track into iMovie? If it's combined in iMovie, then it should import into iDVD without a conceptual hitch.
John

How to sync sound with movie when exporting from iMovie

i have problems with sound synchronization with movie. mostly is movie delayed few seconds behind sound. also sound is repeatedly missing - under certain frequency. videos are prepared in iMac iMovie and exported in to the file and stored on synology. how to fix this trouble before exporting from iMovie?
playing movie on imac works without problem

I have a collection of Apple Support documents about passwords, some of which might be of help ...
iOS: Forgot Passcode or Device Disabled
http://support.apple.com/kb/ht1212
iOS Passcodes
http://support.apple.com/kb/ht4113
Find My iPhone, iPad, iPod a Touch or Mac
https://www.apple.com/support/icloud/find-my-device/
Find My iPhone Activation Lock
http://support.apple.com/kb/HT5818
Find My iPhone Activation Lock: Removing a Device from a Previous Owner's Account
http://support.apple.com/kb/ts4515
Apple release Tool to check the Activation Lock Status of iOS Devices
http://www.idownloadblog.com/2014/10/01/activation-lock-status-check/

Losing audio when importing from QT, help please

I have been unable to capture footage from a handycam to FCP HD, so I decided to capture in imove instead and then export the footage as QT files so I can import into FCP. Exporting is fine, and when I play the files in QT I get both audio and video, but when I import the same files into FCP I only get the video and the audio has disappeared.
When I try to import the imovie dv clips, they play for a second and then the video stops but the audio continues. That's why I decided to convert them to QT.
I have no idea how to fix this. I tried extracting the audio in imovie and exporting that way too, but same result.
Any advice would be appreciated. Thanks!!
(The whole reason for these problems is that I can't seem to capture in FCP. FCP recognizes the camera, but can't seem to control it. It is set on Firewire NTSC basic, and I've played around with different settings on that as well. The camera is set to VTR with AV/DV out on........can't figure out why it won't work.)
Sorry for the long version.

Personally i'd try to iron out the wrinkles in your fcp capture process.
Is your camera on the approved devices list? If not, you might think about a new camera. if it's a sony, you ought to use firewire, not firewire basic as your device protocol.
Can you play out to the camera?
imovie captures a dv stream, not a mov and therein lies the problem with imovie files in fcp. but you ought to be getting unrendered audio (beeps until rendered) not no audio at all. Interesting.
What exactly is the camera?

No audio when exporting to iMovie

I've been trying to take movies I made with our Sony digital camera, exporting them through quicktime to iMovie, but in changing the movie to MPEG4 it loses its audio and in fact, when I go to convert the from MPEG1 to MPEG4, the info window tells me "no audio track in source movie." (even though there is sound when played in quicktime).
I have looked through everything I can find, but I can't seem to find an answer. Are movies taken with a digital camera not sophisticated enough to be used in iMovie complete with the really great audio we were able to capture?
At this point, I'm thinking I need to give up on iMovie and just combine movies in quicktime pro. Can anyone please advise me before I go crazier than I already am?
Thanks..........
Beginner

I've been trying to take movies I made with our Sony digital camera, exporting them through quicktime to iMovie, but in changing the movie to MPEG4 it loses its audio and in fact, when I go to convert the from MPEG1 to MPEG4, the info window tells me "no audio track in source movie."
Multiplexed compression formats like MPEG-1 are not conversion compatible with the QT structure. Use an MPEG-based, third-party application like MPEG Streamclip (free) instead.

Video but no audio when exporting from iPhoto

I have very small (30 sec) clips of video from a digital camera downloaded into iPhoto. When I export or share a clip to QuickTimePro 7, iMovie, my desktop, or e-mail the video goes, but no audio. I have tried so many different ways, I can't even remember what I've done. Can anyone help? I'm at my wits end, and it's a video of my baby laughing for the first time and I want to send it to everyone!!!

With the video open in the QuickTime Player, choose Show Movie Properties from the Window menu, click on the Resources tab, control-click on the entry which contains the file's location on your computer, and choose Show in Finder from the menu which appears. Once the file has been located, download MPEG Streamclip and use it to convert the file; save the converted file on the desktop.
(26939)

Losing saturation when exporting from 1.3

Hello!
I need some help. I just started noticing that when I export my jpegs from Lightroom that I am losing saturation in my images. What am I doing wrong? Do I need to change my settings to something else?
Is anyone else having this problem?
I am exporting as RGB.
Thanks!
Jen

Chaps,
I'm with Jao on this one.
Here's how it is:
|----------------------| ProPhoto Gamut
|-------------------| Camera Gamut
|----------------| Monitor Gamut
If you're in control of your colour management, you are exporting a ProPhoto file and then transforming it to sRGB:
|----------------------| ProPhoto Gamut
|                | ^
|                | |_ "Clipped" data lost in transform
|                |
|----------------| sRGB Gamut
In this case "80% ProPhoto red" maps to "100% sRGB red" and the picture looks right, although it may be clipped. You can't see this clipping on the monitor though. The monitor can't tell the difference between "80% ProPhoto red" and "100% ProPhoto red". You understand I'm making it up with my "80%" and "100%", that's why they're in quotes.
If you're not in control of your colour management, you are exporting a ProPhoto file and then assigning sRGB to it:
|----------------------| ProPhoto Gamut
|                     /
|                    /
|                   /   <- Squeeze down assigning sRGB to ProPhoto pic
|                  /
|                 /
|                /
|----------------| sRGB Gamut
That produces exactly the symptoms you describe. Something that was "80% red" in ProPhoto should map to something "100% red" in sRGB as described above. With bad colour management, one maps "80% ProPhoto red" to "80% sRGB red" and they look nothing like each other.
Note that so-called
color stupid applications - like Preview on Windows, for example - do exactly that.
However, both Photoshop CS3 and Lightroom are not color stupid.
I can easily force CS3 into doing it by a) not embedding the colour space when I save the file and/or b) "applying" a profile instead of "converting to" a profile.
Lightroom does neither of these things by default on my machine.
Your mileage may vary.
Damian
PS I don't work for Adobe.

Losing image when exporting from CS5 to PDF

Hi All!
I am working off of a file that was sent to me by our designer. I made a few small changes to some text and went to export to PDF and one (and only one) of my images is lost in the PDF!
The image was originally embedding in a .idml (mark up) file when it came from the graphic designer. I worked in that file and saved it as an .indd file (CS5) and exported. I then tried to delete the file and link it, no go. Re-embed it, still nothing. I've now tried exporting it once again to .idml and exporting to PDF with no success.
I then went in, opened the original .idml file and exported to PDF without making any changes and I'm still losing the image! My graphic designer is able to export just fine on his end (I'm pretty sure he's working on CS6) and we've had the peice printed once already, so I know it's something going array on my end.
I've also tried changing various export settings with no luck. What am I missing here?
Thanks in advance for your help!

Is CS5 patched to 7.0.4?
Is the image on a master page?
Is it visible when you switch to Preview mode?

Losing audio when exporting from imovie to real player

Similar Messages

Maybe you are looking for