Losing connection every monring

Hi
Each morning for the last five, I go to connect and get the message (server not found)
All ligts are on the hub and I have the same problem with all wireless devices (leptop, phone, desktop)
Have call the Call Centre and been advised to factory reset the HUB - guess what - it didn't work
Any ideas, as getting a little tired of resetting hub every morning
Jo

Probably something interfering with your wireless signal. Try connecting with an Ethernet cable and see if the problem is still there.
Have you tried changing the wireless channel on the home hub?
Which version of the home hub do you have?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

Why does my mouse keep losing connection every minute

why does my mouse keep losing connection every minute, its not the batteries

I'm having the same issue. Every so often it loses connection then re establishes. This goes on repeatedly.
If you change batteries while the computer is still active then it takes for ever to re connect.
Can't wait until someone replies to your question.

Apex admin user losing connection every a few second

Dear all,
I logon with apex admin user on Apex 4.0.
Admin user losing connnection every few second, and I must reconnecting every few second.
Developer users on apex losing connection too. But user whose connecting on apex aplication with database users, don't losing connection!
Anything at all is not change on server where is installed apex, and on database server.
It has happened in last month.
Did anybody have similar problem?
Thanks in advance.
Borjana

Aarkoub wrote:
Hello,
Sins I have updated my firmware to Firmware Version: 1.5.02 + the router is unable to keep the internet connection alive. I have restart the the router every few minutes or release and renew the DHCP configuration ( IP and DNS settings)
Restarting the modem en than the router
Resetting the router
resetting the router to factory defaults settings
connecting a computer directly to the modem works fine. The problem is the router.
Dose anybody have a solution
PLEASE HELP
After upgrading the firmware, did you reset and reconfigure the router? Possible reasons for encountering this kind of problem are firmware issue or ISP having intermittent connection. You mentioned that you already check the connection behind the modem and its working fine. If the firmware is already updated, reset and reconfigure were done. Then I suggest for you to call Cisco technical support for this, might be the router is defective. Check if they can still replace your router. Just let them know that troubleshooting steps were already exhausted.

Keep losing connection every 15 minutes

As the topic say, I keep losing connection about every 15 minutes, which has been ongoing
for more than 24 hours. This is starting to get on my nerves, I'm running a business and every
time I get cut out, I lose a lot of money. BT Infinite suppose to be relyable and stable
and here I am with this flashing modem, paying 45 pounds a month for this **bleep**. This is not the
first time this is happening, what the F are you going to do about it?
I would like to cancel my contract before it runs out, since you are not delivering what promised.
Im relying on a stable connection.
Very annoyed customer

are you a business broadband customer? if so you need to post here as this is a residential forum https://business.forums.bt.com/
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Access point --- Internet losing connection every 5 minutes....

i have a wrt54g v6 router and a wmp54g both current drivers and firmware from the linksys website. i am frequently losing connection between router and internet. i've lowered my mtu, i've forwarded ports, reinstalled card in all 4 pci slots, i've literally done everything i know possible to do. i sat on the phone for 4 hours waiting on a linksys technician before my phone died friday trying to get ahold of someone for some help. resetting the router doesn't seem to help at all. the connection loss time is random aswell. sometimes it's for minutes sometimes it's for 10 seconds, but when you're playing online games that's all it takes to disconnect you. i've been going absolutely crazy trying to fix this so if anyone has any idea's i would be ever so greatful.
pc specs
windows xp pro sp2
2.0ghz amd 2400+
nvidia 6600 agp
1gb corsair pc2700
160 seagate hd

First off all i don't suggest to play online games on wireless since as we all know wireless is such an unstable media for connection.
Can you tell me the distance between the computer and the router. Also what is in the direct environment of the network.
Are you using a 2.4 GHz cordless phone. This device is can cause intermittent internet connection on wireless networks
we still have to isolate the problem just in case something else is causing your problem.
"Give them nothing... But take from them everything..."
-Leonidas "300"

Wired comp losing connection every ten or 15 seconds

my wired connection drops every 15 to 20 seconds wireless on other comp works fine help me please thanks.I have a hp comp desktop nd a dell the hp keeps dropping it is the one wired to a netgear modem/router cg3000dv229. if that helps

I'll see if I can help you resolve your wired LAN issue.
What model is the PC?
Without knowing the model we can check some basics first:
Have you updated the PC to Win8.1?
If so, have you checked for an updated Network driver?
You can check for updated drivers at hp.com on your product support page
OR
Manually run Windows Update and see if there are any Recommended/Optional updates - that is where you will find HW driver updates for your PC.
It looks like you have a DOCSIS 3.0 Gateway so there aren't any Firmware updates (updates are normally pushed from your ISP).

Windows 8 keeps losing connectivity

Hi, not sure if this is unique but for the past few weeks Windows 8 has been losing connectivity every few minutes when browsing web pages, playing games etc. I am sure it's windows 8 as I have another work laptop using XP that I can be on all day via a
VPN and that does not drop at all (it would normally drop within a few seconds of losing connectivity). I've done a lot of searching on the net for the same issue, others seem to be having similar things happen such as slow speed but can't find anything that
matches, hence this separate question.
I have also tried swapping routers to no avail. The thing is, you wouldn't know anything had happened from the network connectivity. Suddenly a page won't load. The wireless connectivity at the bottom right of the screen shows a full 5 bars (not limited
connectivity). The way to get it back again is to leave it for a few minutes or disconnect from the router and reconnect again. Even whilst typing this I have had to do that twice.
I'd appreciate some suggestions!
Many Thanks, Paul.
PS... IPCONFIG/ALL shows...
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
Wireless LAN adapter Local Area Connection* 17:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft Hosted Network Virtual Adapter
#3
   Physical Address. . . . . . . . . : 56-DE-2B-64-0B-25
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter WiFi 2:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Qualcomm Atheros AR5B125 Wireless Network
Adapter
   Physical Address. . . . . . . . . : 74-DE-2B-64-0B-25
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 192.168.0.4(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : 11 May 2013 10:31:15
   Lease Expires . . . . . . . . . . : 12 May 2013 10:31:21
   Default Gateway . . . . . . . . . : 192.168.0.1
   DHCP Server . . . . . . . . . . . : 192.168.0.1
   DNS Servers . . . . . . . . . . . : 194.168.4.100
                                       194.168.8.100
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetLink (TM) Ethernet
   Physical Address. . . . . . . . . : DC-0E-A1-07-A8-F0
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{A319BEA5-A55C-4E0C-AF67-922BEBD4C7BB}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 13:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:9d38:953c:3483:1732:adda:66e3(Pref
erred)
   Link-local IPv6 Address . . . . . : fe80::3483:1732:adda:66e3%14(Preferred)
   Default Gateway . . . . . . . . . : ::
   DHCPv6 IAID . . . . . . . . . . . : 436207616
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-16-28-39-CC-DC-0E-A1-07-A8-F0
   NetBIOS over Tcpip. . . . . . . . : Disabled

Hi,
Does this issue occur with both wireless and wired?
I suggest to perform these tests to troubleshoot the issue:
1 Update NIC card for your machine
2 Temporary disable firewall and antivirus program
3 Logon with Safe Mode with Networking
4 Update framework for your router.
Leo Huang
TechNet Community Support

Apple magic mouse keeps losing connection with Macbook pro

I have a 2012 macbook pro, after upgrading to Mavericks(10.9.1, not have any other 3rd party software,just pure OS X), my magic mouse always losing bluetooth connection suddenly every one or two days. When losing connection, I found the bluetooth chipset type showing in macbook system information changed to unkown (FFFF). I have contacted with apple global support, and also have not gotten the solution. Just cleaning cache, and ect. but still didn't work.
When I downgrading the OS X to 10.8.5 Mountain Lion, same macbook, same magic mouse, work very well. Never happened lose connection issue during one and a half month. So, it should be a Mavericks bluetooth driver's issue, or something reletived.
Any body have some good idea in solving this issue?
Thanks in advance!

I have the same problem with a 2007 MacBook Pro on Snow Leopard. As soon as I changed the mouse's batteries, it started losing connection every few seconds. The mouse came with Energizer batteries originally - they supposedly don't fit well, but the mouse worked fine. I exchanged them with Duracell, which gave problems. Now I have Varta batteries installed, they give problems too. The paper-trick doesn't work for me.
Quite franky, I think it's rediculous that a fancy €69,- wireless mouse is so fussy about batteries. It's impossible to work with it. Is this just another way for Apple to get people to buy their batteries? I think a mouse this expensive should accept any and all batteries. Please, Apple: fix it. Seems like a really simple matter. Just put longer and stronger springs in the contacts for the negative poles.
Thanks.

Losing Connection with WRT54GS

Hi All,
First off I apologize if this concern has been noted and solved elsewhere on these boards. I recently moved into a new apt with a friend, we went with Comcast for our cable/internet set-up, and upgraded internet. Since I have a cable wire in my room we set-up the Comcast modem in there, as well as the new WRT54GS router I bought from Linksys, with the speed booster, not sure if that makes a difference. My friend is connecting through the router with a USB G card (also speed booster). Everything was working fine for the first 8-10 hours, the connections and hook-ups are all correct, but in the last 48 hours I have found that I have been losing my internet connection (I’m wired to the router). The linksys software has been diagnosing this problem as “Another network detected” and basically telling me that I am no longer connected to my router. In short, to fix the issue all I have to do is unplug the router, plug it back in, and wait 15 seconds and I’m back online. Obviously this isn’t a huge issue but it is getting rather annoying, especially since it seems to go offline every 2-3 hours after I fix it with the same issue. I have called linksys but was unable to get anyone the first time, so before I try again I was hoping that perhaps someone on these boards had a similar issue, or could at least tell me the direction to take, if its most like a router issue, or perhaps Comcast issue, in that maybe my wiring or modem is causing the problem. There are several other wireless networks in the area, I’m not sure if it could be an interference issue as well. The peculiar part is that my roommate has not lost his connection during my down time….
Thanks in advance for your help
Regards
EMS

I'd like to see some input on this one as well.
I have the WRK54G and it is doing the same thing, it started about 3 weeks ago losing it's connection every 2 or 3 hours.
I just reformatted my system (for an issue not related to the router obviously) and now it's losing connection every couple of minutes then reconnecting.
The Linksys connection software won't even let it connect, but the default windows software will at least let it connect for a little while, it's getting pretty frustrating.
I've had to wait for it to reconnect 3 times just while typing this.Message Edited by Douglajl on 03-20-200702:56 PM

Losing connection to wireless network every week

I really don't understand why this keeps happening. I have a PC (Windows XP) connected to a cable modem. I also have a WRT54G wireless router connected to the modem, following instructions on the CD-ROM that came with the router.
Across the room, about 8 feet away, I have another PC (Windows XP) with a Compact Wireless-G USB Network Adapter with SpeedBooster model WUSB54GSC installed in one of the computer's USB ports. Again, I followed installation instructions on the supplied CD-ROM and things came together and I was able to connect to the internet through the wireless router.
A week later, the 2nd computer lost it's connection with the router, so I tried "repairing the connection" but that didn't work. I ended up uninstalling the software and starting over. This time it worked, but the connection was "connection 2."
Every week, usually on Sunday, I seem to lose my connection with the router and now I am up to "connection 6." Other people I have spoken with say they never loose their connections and the folks at Road Runner think it must be a problem with the router. Who knows? I wouldn't be surprised if I set it up incorrectly and have probably confused it with all the uninstalling and reinstalling I have done.
Any suggestions? When it does connect, it works fine. I just don't understand why it keeps losing it's connection every Sunday.
Thanks for any help/advice anyone can offer.

Sounds like you are not connecting to the correct network. Let say you called your network ORLANDO. You should see ORLANDO in view your network connections. Also, if you would click on view workgroups computers, you should see all your computers listed. You will have to log on to your router and make sure everything is set up properly. XP default is MSHOME.
I have had my share of problems using WUSB54GC on my windows 98 se. No problems with XP sp 3 using identical adaptor. I am been at this for a couple of months. Usually unpluging adaptor and repluging it will solve the problem. No problems using XP. I have even switch adaptors on both computers.
Greetings from Northern Ontario, Canada

Been losing connection for magic mouse and wireless keyboard

When I have my MBP running Mavericks in clamshell mode, I lose connections to both magic mouse and apple wireless keyboard in clamshell mode. I've tried all the PRAM SCM, aluminum foil and paper tricks. What I then did was test what happens when I leave the MBP open rather than in clamshell mode and it appears to avoid losing connection, at least that is what I've concluded with Mavericks for now..... anyone else able to replicate this? Having to leave the MBP open is not ideal.

Barry, thanks, still not working. I've tried every thing I can think of or have read, what I'm concluding is that there is either a problem with Mavericks or something has changed on how bluetooth works in Mavericks. Did not have this problem for the last 4 years. I can reproduce the problem when I close the laptop. I had the Bluetooth and wireless card checked out and replaced about 3 weeks ago. Problem has continued.

LaCie external hard drive keeps losing connection to Windows 8.1 computer

Hello all,
My LaCie external hard drive (Rugged version) seems like it keeps losing connection to my brand new Windows 8.1 laptop. The laptop is an HP Pavillion 15-p 133cl TouchSmart Notebook which I just got today. Basically, every few minutes, or if I nudge the external
a bit, the computer will seem like it disconnected and reconnected to the external hard drive in a split second and bring it up in the Windows Explorer. This external hard drive doesn't show any problems connecting to any other computer, but it has occurred
with 2/3 ports on this computer so far. I'm a bit worried, because I definitely DO NOT want the files on this external to get corrupted in any way. What should I do? Thanks a bunch.

may I know your external HDD model, to check which USB version to isolate power and cable connection issue
if this is USB 3.0 try to attached at USB 3.0 at your laptop, your laptop has 2 USB 3.0 and 1 for 2.0, for external HDD with USB 2.0 sometimes need more power / more than 1 connection, sometimes the power will loose
but since the trigger it will disconnect if you nudge the HDD, I suggest back up data to your laptop first, try to change with other data or power cable, try also update your laptop chipset
try to check with other device to isolate port issue
may I know if you are using other PC, did your external HDD also will disconnect if you nudge it?
contact your external HDD manufactured to get some suggestion

Questions About Losing Connection

Like other people I've noticed here, my WRTG45 v5 wireless router has recently started losing connection to the net multiple times a day. At first, we thought it was because our modem was old, so we bought a new one, but it didn't fix anything. So here are my questions:
1. My dad seems to think that a configuration or setup CD (that we lost) is required to make the router work with the new modem. Is this true? I don't think so, but I have to ask just so I can get him to move on.
2. I noticed in other posts here that programs like Bittorrent can cause the router to be overworked or whatever. This might explain our problem, as I use Bittorrent a lot (but not everytime the connection has dropped). If this is indeed the problem (or contributing to it), is there anyway to deal with it while still being able to use the program?
For the first couple months, the router was working fine. Even with Bittorrent running a lot, and all the computers (2 wired, 1 wireless, and 1 wired X-Box) engaging in various activities on the net. So this is very puzzling to me.
One more bit of information, I have given every computer a unique, static IP address. However, I noticed recently that when I look at the router configution after typing in its IP address in a web browser, that it is set to DHCP Enabled.
Also, in the advanced TCP/IP settings for this connection, under the WNS tab, the NetBIOS setting is set to the default of using NetBIOS from the DCHP server.
Since I am using static IP addresses, could these DHCP centered settings be causing problems? Although, even if they are, it still doesn't explain why the router was working fine months ago (unless someone changed stuff without my knowing).
Anyway, any help at all would be appreciated.

I assume you meant that you had a WRT54G v5 router.
First of all, the setup CD is not required. All router settings can be made by going to the router's web pages at 192.168.1.1
It is possible that the static LAN IP addresses are causing your problem, if they were not set up correctly. Linksys has a strict set of rules to follow regarding static LAN IP addresses.
With Linksys routers, a fixed (static) LAN IP addresses must be assigned in the device that is using the address. So you need to enter the fixed address in the computer or printer, not in the router.
When using a Linksys router, any fixed LAN IP address must be outside the DHCP server range (typically 192.168.1.100 thru 192.168.1.149), and it cannot end in 0, 1, or 255.
Therefore any fixed LAN IP address would normally need to be in the range of
192.168.1.2      thru 192.168.1.99 or
192.168.1.150 thru 192.168.1.254
assuming you are still using the default DHCP server range.
Also, in the computer, when you set up a static LAN IP address, you would need to set the "Subnet mask" to 255.255.255.0 and the "Default Gateway" to 192.168.1.1
It is also important that no two devices on your network be set to the same static LAN IP address.
Check all of your static LAN IP addresses. If you have violated any of the above rules for static LAN IP addresses, it could be the cause for your problem, and you should fix it before attempting any other router repairs or changes.
You should leave the DHCP server turned on. This way, if you have a visiting friend who you want to connect to your system, it will be easy to do.   Leaving the DHCP server turned on should not cause any problems, even if all your addresses are fixed. In general, you should let the DHCP server assign all addresses, unless there is a specific reason to use a static address. You can mix static and DHCP assigned addresses on the same LAN, as long as you follow the above rules for static addresses.
Linksys routers have had problems when BitTorrent is used. Your router has new firmware posted that should improve compatibility with BitTorrent. It is firmware version 1.02.0   You will need to download and install this firmware (after fixing the static address problem, if any). (Note: When you update your firmware, you should use a computer that is wired to the router. Also, when you do a firmware upgrade, turn off all other computers on your system, and unplug all other wires from the router.) After you have installed the firmware, and powercycled the router, you will need to reset your router to factory defaults, then setup the router again from scratch.
Message Edited by toomanydonuts on 04-12-200712:54 AM

Mouse losing connection

My mouse is losing connection with my computer on a regular basis, and regaining it after around 1-2 minutes. The problem is happening every day, sometimes up to 5 times, during which time the mouse is completely unresponsive. I've tried rebooting, turning the mouse on and off, changing the batteries but nothing seems to work. Can anyone help, as I've never had this problem with wireless mice before?

Hello:
Try resetting the PRAM and SMC. It is also possible that the mouse is failing.
Barry

Losing wireless every few minutes

My macbook pro is losing its internet connection every few minutes (wireless on at&t 2wire router). I have to stop and restart airport to regain connection.
Other macs on the same router work fine. On this one, istumbler will not launch. It worked once then get unexpected error crash after that. Is that a clue?

iStumbler depends on a stable wireless connection to be able to display any data. If you can't establish a good wireless connection, iStumber cannot run.
Any cordless phones in the vicinity of the MacBook? Any other electronic devices like televisions or amplifiers near the MacBook? Any metal obects like a cabinet or bookshelf near the MacBook?

Losing connection every monring

Similar Messages

Maybe you are looking for