Losing connection with Exchange Server (2003)

The cause of losing the connection is me disabling the Users Accounts in our MS Domain for Maintenance on the Network.
I assume there must be a certain amount of time where the iPhone trys to connect to the exchange server and then time's out or something like that.
Too get the connection back is usually a restart, turn off on on wifi or airplane mode or reenter the account password.
Any ideas on how I can still disable the user accounts and not have the iPhone's lose their connection or time out?

I don't think this is possible. I use Exchange server at work, so I can tell you what it will do:
- You can do "over the air" IMAP e-mail to your exchange server (if your IT dept supports it)
- You can desktop sync your appointments and edit the from the phone (Edit from phone means view notes, times, etc -- you cannot change attendees, etc.)

Similar Messages

  • Why can't I connect to Exchange Server 2003? I'm using OS Lion. My iphone connects, what am I doing wrong?

    Why can't I connect to Exchange Server 2003? I'm using OS Lion. My iphone connects, what am I doing wrong?

    the iPhone uses active sync. Desktop clients do not. Desktop clients use another exchange protocol (which i can't remember as i'm not a microsofty).
    Just because you can access via active sync doesn't mean you can access it by other methods, and vice versa.

  • Outlook 2013 not connect with Exchange server 2013 in internal network

    Hello All,
    I Have two Exchange server 2013 in our environment. Both server install mailbox and CAS role. After configure exchange server 2013, Outlook 2013 not connect in internal network. I have configure outlook manually. i tried by using the suggestion from blog
    but not work. Outlook show that Server cannot connect/ server name could not be resolved. in outlook setting i also put exchange proxy setting. In exchange admin center i have changed the OWA, OAB, Auto discover name. But still not work.
    I know that outlook can be connect from external by using ssl certificate and publish outlook anywhere but i did my configure from internal network. 
    Can you please suggest as soon as possible.
    Thanks,
    Parvez

    Hi,
    Firstly, I’d like to explain, same with external users, internal users use Outlook Anywhere to connect with Exchange server and use Autodiscover get all settings.
    Thus, let’s try the following resolutions:
    1. run the following command: get-clientaccessservice |fl autodiscoverserviceinternaluri
    2. check if the host name in the above URL is in the DNS server and there is a DNS entry about the host name points to the proper IP address.
    3. Check if the above host name is in your certificate.
    Thanks,
    Angela
    Angela Shi
    TechNet Community Support

  • Can't sync IMAP inbox with Exchange Server 2003

    Since Lion doesn't work with Exchange Server 2003, I set up an IMAP account in Outlook 2011 via Davmail for myself and a colleague on our laptops. This has worked for my e-mail account (syncs on multiple computers, including one running Exchange directly, and with my iPad's mail client), but not for my colleague.
    For some reason, my colleague's inbox receives pushes from the server, but won't send back changes made in Outlook. Messages that have been read remain unread; deleted e-mails go into what is purportedly the server's trash in Outlook 2011, but remain in the inbox on the server. Changes made on the IMAP on the laptop also don't sync to my colleague's iPhone.
    Our configuration is the same.
    Any ideas? Could it be on the server side?
    Thanks!

    I feel your pain. I also am a lone Mac user in an entire building full of PC robots, and the IT people haven't got a clue.
    I've been trying to get Mac mail working with the Exchange server here, but it's just not happening. I've managed to get Entourage working though, which is far from ideal but significantly better than the web-based version of Outlook that I'd been having to use up till now.
    For entourage, then yes - the incoming and outgoing servers are the same. You may need to ask your recalcitrant IT people which port numbers to use, but give it a whirl anyway.
    Best of luck,
    Boris
    UK

  • E71 cant connect with exchange server

    I have tried to connect with our exchange server 2003 at work to sync my business e-mail but I am unable to connect. There should be a learn how feature on this topic on the nokia website.
    Solved!
    Go to Solution.

    In my pionion, very minimal inputs are needed to get the connection for MFE.
    Exchange server
    Secure connection
    Use default port
    (For these you might need to contact the IT support team of your company)
    Access point
    (Based on the data plan you are subscribing)
    User name
    Password
    Domain
    (This I think you will be aware of)
    Rest of the settings are more towards configuring and personalising the set up, and does not involve connectivity.
    Hope this info helps.
    Regards,
    BK76

  • Portal integration with Exchange server 2003 issues.

    Hello,
    We are using NW04s EP 7.0 SP16 and Exchange server 2003. We are trying to perform OWA and Groupware integration. Both the servers are in the same domain.
    I have followed all the steps in the notes and documents available there in SDN. There are few issues:
    1) The latest KerbMap filter has been configured in Exchange backend server. SAP note 785343 says that the exchange frontend server needs to be configured for anonymous authentication to enable pass-through authentication. But doing this breaks the form based authentication in exchange server, and it also poses security risk when the backend exchange server is behind the firewall. How do we enable pass-through authentication so that the exchange frontend passes the mysapsso2 cookie to the exchange backend server?
    2) When I try to create an appointment or try to view the appointments, it gives an error message saying " No logon data found for system Exchange". The Exchange system has been configured for SAP Logon Ticket, and the user mapping fields were left empty. Why should it prompt for user mapping when the logon method is "SAP Logon Ticket"?
    There are many documents out there, but none is the latest with clear steps. Can anyone point me in the right direction please?
    Thanks,
    ~Yasin

    As far as I remember, when Exchange 2003 is installed on a Domain Controller, it uses the local DC as a GC. You need to set back the 2003 DC as GC and restart it.
    I believe, you are aware that demoting/promoting a DC with Exchange server on it is not supported by MS. The best approach is to:
    Introduce an Exchange 2010 member server
    Move all resources from Exchange 2003 to Exchange 2010
    Decommission Exchange 2003
    Demote the 2003 DC
    Step by Step Screencasts and Video Tutorials

  • Outlook 2007 on XPsp2 OEM unable to connect to Exchange Server 2003??

    Hi
    My outlook 2007 came part and package of the Microsoft Office 2007 Enterprise Edition, and our SBS server runs Exchange 2003.
    After setting up the connection in Outlook to connect too Exchange (when clicking test (check name) on configuration it is successful) --
    The Error Message is so upon start up :
    Cannot Open your Default e-mail Folders, You must connect to microsoft exchange with the current user profile before you can synchronize your folders with your offline folder file..
    When disabling the cached exchange mode the error message changes however, but it is still unable too actually open outlook.
    Cannot open your default E-Mail Folders. The Attempt too log on to the exchange server failed... (after in the configuration the test suceeded.)
    The computer has a fresh copy of XP SP2 OEM, as well as Microsoft Outlook, only other software on is SQL server 2000 (All microsoft Updates installed). The active user is domain controlled and has the same credentials as is used by Exchange.
    After selecting the checkbox under Control Panel -> Mail -> ......... "User Identification" -> Always prompt for login credentials no change is made to this error....
    I then disabled the use of offline folders..... "could not open your default email folders. The information store could not be opened"
    Please provide assistance in any way possible.... ASAP as well if possible.
    Thanks a lot
    Marc

    GedMarc,
    I had all the same problems you had, and did the exact same things you did to no avail.
    This is what solved my problem:
    http://support.microsoft.com/kb/913843
    1.
    Click Start, click Run, type regedit in the Open box, and then click OK.
    2.
    Locate and then click the following subkey:
    HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\RPC
    3.
    On the Edit menu, point to New, and then click DWORD Value.
    4.
    Type DefConnectOpts, and then press ENTER.
    5.
    Right-click DefConnectOpts, and then click Modify.
    6.
    In the Value data box, type 0, and then click OK.
    7.
    Exit Registry Editor.
    Best regards,
    T

  • Connect with Exchange server

    We are using Coldfusion 9 and Exchange Server 2010.
    I installed the certificate in CF 9.
    The Exchange server is configured for using OWA.
    With the follwing code:
    <cfexchangeConnection
        action="open"
        username="<username>"
        password="<password>"
        server="<ip-address>"
        protocol="https"
        connection="testconn1">
    I get following error:
    Unable to connect to the Exchange server using HTTP/HTTPS protocol.
    HTTP response code : 302
    Anybody any ideas how to cennect with CF 9 to Exchange 2010?
    regards
    Feike

    I seem to remember something about Exchange 2010 dropping WebDav which CF requires or something, and basically it won't work until CF10. Unless there's been some kind of update or someone knows more than I do about it.
    Certainly tried it myself and just hit a brick wall.

  • Treo 750 losing sync with Exchange Server

    Hi All,
    I have an AT&T Treo 750 that I have been using as my business phone for going on 2 years. I have had this synced with my Exchange server for over 1 1/2 years. About 2 weeks ago I noticed that I was not receiving emails as regularly and noticed that it was not syncing automatically. I could go into the account (using the outlook email account) and do a manual send/receive but it would not do it automatically. I reluctantly broke down and did a hard reset and set the account back up and it stared working again for about a week and quit again. I ended up getting on an online chat session with Palm and tehy had me delete and reset up teh account. Again it worked for about 4 days and now has quit working again.
    Any ideas? This is very frustrating as I am mobile a lot and need to get my emails quickly as they come in.
    Post relates to: Treo 750 (AT&T)

    That could be the problem and I think you should try to archive some of your email. Our chat support covered just about everything with the device itself. While it could be the device still causing this I want to see if the server could be at fault. With EAS its hard to tell what could be causing the issue. Other possibility could be that it is an account corruption on the server side or the device OS or email program is corrupted and cannot be fixed with a hard reset.
    Basically what we need to do is have you archive some of your email, if that does not resolve the issue then see if your IT can create a new email profile for you on the server and see if that resolves the problem. If they are unwilling to do that step or that does not work we need to try another device to see if you have the same issue. I would suggest that you try another 750 WM 6.0 to see if it is your treo or the server causing this.

  • IPHONE 4 with Verizon wont sync with Exchange server 2003

      I am trying to sync my VZ Iphone 4 with my exchange server at work. I have updated my account to have corporate email, I have done troubleshooting and tested my credentials on another phone (att) but NOTHING works. I have the white IPhone..(the color shouldnt matter!) but nothing is working...help....is it just verizon?

    Without details, like any errors that occur, it is almost impossible to offer suggestions.

  • Iphone does not work with exchange server 2003

    keeps saying server not found....

    You have to activate Exchange ActiveSync for each user's mobile device.  This is done by the IT folks in the back office.
    http://www.google.com/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=4&sqi=2&ved=0 CDwQFjAD&url=http%3A%2F%2Fimages.apple.com%2Fiphone%2Fbusiness%2Fdocs%2FiPhone_M S_Exchange.pdf&ei=API8UN6UCIiB6AGzgoHYDw&usg=AFQjCNHykbMLl4i_zgFoN2AAF6P5ucjrow

  • KB953804 for delegatesentitemsstyle in Outlook 2003 in combination with Exchange Server 2010 SP1 not working.

    KB953804 Full  title  "Hotfix for An e-mail message does not appear in a user's mailbox if the e-mail message was sent on behalf of the user by a delegate in Outlook 2003." 
    We have this working for ok Outlook 2003 SP3 in combination with Exchange Server 2003 SP2.  Now for mailboxes that are moved to our new Exchange 2010 environment the hotfix stopped working. The sent items get stuck in the outbox of the delegate instead
    of moving to the user in whose name the mail was sent. It does not matter if the user mailbox is on 2003 or 2010 as long as the delegated user is on Exchange 2010 SP1 it fails. We use Outlook 2003 SP3 in online mode.  Does anyone know how to fix this
    or maybe someone knows an alternative way to move the mails to the sent items with Exchange2010 SP1.

    Hi,
    I'd like to know how did you set "send on behalf",from outlook give delegation permission or from Exchange Server give "send as" right?
    Please try to use get-adpermission to verify if the user has "send as" right.
    Manage Send As Permissions for a Mailbox
    http://technet.microsoft.com/en-us/library/bb676368.aspx
    Note: After you grant send as right, please try to restart Microsoft Information Store.
    By the way, do you receive any NDR or error information when you send on behalf of others?
    Xiu

  • Snow Leopard-Exchange Server 2003-Entourage 2008 (12.2.1)

    +I have one final question before I upgrade to Snow Leopard.+
    I currently run a 2.8 GHz Mac Pro, Leopard 10.5.8, Entourage 2008 (12.2.1) using Exchange server 2003. Everything is happy and works well.
    I understand that I won't be able to use the new Snow Leopard built-in Exchange Server support.
    *But, if I upgrade to Snow Leopard...will everything stay happy with what I've been running?*

    There are connectivity issues between Exchange Server 2003 and Exchange accounts in Entourage 2008 running on Snow Leopard. These connectivity issues are also evident via web-based email (Safari & FireFox) on Snow Leopard and Exchange Serve 2003.
    You will eventually loose connection to Exchange Server 2003. Restarting your computer will solve the problem temporarily.
    POP accounts appear to work fine in this environment.

  • Iphone 3G, Exchange Server 2003 and NOT sending "Read Mail" receipts

    I have a 3G Iphone that syncs with Exchange Server 2003. I do NOT want people to see when I read or delete their emails so I have my Outlook account set up that way. It works from my desktop, however, my Iphone still triggers notifications saying whether I read a message or deleted without reading. I haven't found a way to change this on the phone - has anyone else?
    Sorry to repost this question, but the first back in March never got any replies, so support suggested I try again. Thanks!

    http://davmail.sourceforge.net/osximapmailsetup.html
    http://davmail.sourceforge.net/faq.html
    http://davmail.sourceforge.net/macosxsetup.html

  • ICal and Exchange Server 2003

    Hello from Barcelona,
    I am a new mac user trying to sync iCal with Exchange Server 2003. I have followed all instructions regarding domain, user name, password and URL address but it does not work. The last answer received was "account info not found" & "“HTTP/1.1 440 Login Timeout”. Incredible but when using the program AddressX (downloaded from internet) with the above mentioned configuration...it works and can get my company's global book address.
    Just to make sure I am following all "mac" rules. What I am using is:
    Domain/UserName
    Password
    https://company.com/exchange/User.Name
    Am I missing any important thing? Please help!!
    Thanks in advanced!!

    There are several discussions regarding this same topic on the Apple forums and elsewhere. None of them have solved the problem. This seems to be an issue that has been around for a long time but never addressed by Apple or Microsoft. From some simple tests that I have done, it appears the the Microsoft Exchange Server is not interpreting the iCal event (.ics extension) properly. I have seen discussions saying that Apple is not formatting the event properly or is using a newer standard that MS Exchange does not support. I believe it is the later as I can make the event work properly without any software changes but I have to do some steps manually. Here is how I can make it work and why I believe something is wrong in MS Exchange:
    - create event in iCal and add an Outlook user
    - send the event/email (ignore this email on the PC as it does not work)
    - open the just sent email and save the attached iCal event
    - find the saved iCal event and add a letter to the extension such as ".icss"
    - (Note: I don't know if there is a way to rename an attachment already in a message)
    - attach this renamed event to a new message and send it to the Outlook user
    - the Outlook user must open the message, save the attachment and rename it back to ".ics"
    - double clicking / opening this renamed file now works perfectly in Outlook
    Now, if I could only automate some of these steps on the Mac before I send the message would be very helpful. This is not a great solution but I use it for events that I want to sync between my home Mac and my office PC.
    Because the renamed attachment (.icss) works through Exchange (by ignoring it), I am lead to believe that MS Exchange will interpret an ".ics" extension and mess up the handling of it for some reason. Microsoft is never one to follow standards very carefully or adopt them very quickly. Our company is using Exchange 2003 so maybe that is part of the problem as it is an older version.

Maybe you are looking for

  • External Display not being found

    Hey i posted this under macbook display but no one really goes in there so can you guys help?? Hi recently i borrowed a friends official apple mini-dvi to video adapter to watch a movie with my macbook. He uses the cable with his iMac. I tried pluggi

  • Scheduling Back Ground job

    Hi All, I need to schedule a daily background job for MB52 transaction and need to save the output of MB52 in a specified directory . Can any one tell me whether it is possible to save back ground job output in specified directory? Thanks & Regards k

  • Can anyone share - Web Service / WSDL for either Access or SQL Server

    I am a newby and have never written a web service so I hoing someone will share a WSDL that is working for them! Thanks in advance for your help!

  • How do i cut and paste in thunderbird for windows 8?

    i don't know how to do it.

  • Stored proc as cron job

    I have a stored procedure that does updates. Is is possible to call this procedure at a specific time everyday like cron jobs are done? If so how can we set this up. Thanks srividya