Losing connection with uverse at 830 every night and last for hours

Then come daytime my internet is just fine til 830 again each evening.Will come on and you can go to one page then it goes right back to "local access only" mode.

dwwsmp wrote:
Then come daytime my internet is just fine til 830 again each evening.
Will come on and you can go to one page then it goes right back to "local access only" mode.
Unluckily sounds like interference or dirty power causing these problems, dirty power solved by Tripp-Lite Surge Protectors.
Interference like these:
From ScottMac:
Have you notice the occurrances in the context of other events in your home, possibly outside your home, and (really happens) something in a neighbor's house?
A neighbor with a new kilowatt linear for his Ham or CB radio?
Maybe a blinky streetlight?
Any electrically-operated workout gear in your home (or neighbor's)?
Aquariums?
Heating Pads?
Light Dimmers?
Touch-control lamps?
Dusk/Dawn sensors on the porch?
Any new CFL bulbs (OK to be green, as long as you don't watch TV or listen to AM radio ... j/k ...)
From SomeJoe7777:
* Power line interference, such as:
* Fluorescent light ballasts
* High-intensity gas discharge lights like mercury vapor
* Grounding problems, such as improper ground at the NID, the pedestal, etc.
* Electrical system grounding problems, such as improper ground on the RG's outlet, the breaker panel, etc.
* HAM radio broadcasts in the HF band
* AM radio transmissions, such as a nearby radio station
Try to isolate any potential source of these problems and see if you can find one that eliminates the interference.
Chris
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more

Similar Messages

  • Ipad3 vs wifi? Everytime i lock the screen i am losing connection with my wifi

    Ipad3 vs wifi? Everytime i lock the screen i am losing connection with my wifi. It has not happened before

    Try restarting or rebooting your iPad. See if that helps.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Acouple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since with Apple

    A couple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since,with Apple & Apple store support & many hours of contact with them the problem keeps recurring

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • I keep losing connection with my printer

    I keep losing connection with my printer.

    Can you provide more details?
    - What kind of time capsule you are using?
    - What kind of printer?
    - How is the printer connected (Wifi, LAN, USB...)?

  • I am experiencing network failures with my Airport Extremes: the main router is a 2nd Gen, the extension a 5th Gen. The 5th Gen keeps on losing connection with the main router. Any ideas why?

    I am experiencing network failures with my Airport Extremes: the main router is a 2nd Gen, the extension a 5th Gen.
    The 5th Gen keeps on losing connection with the main router and thus with the internet.
    Any ideas why?

    Is the second Extreme configured to "extend" the network created by the first? If so its position must be such that it has a strong wireless connection to the first Extreme. If it is at the limits of the first one's wireless range its connection will be tenuous. Place them closer together and determine if that makes a difference.

  • Hi, in our Enterprise environment, we have a single mac with Mavericks version 10.9.2 and Office for Mac 14.4.1. When setting up outlook, we are trying to connect to a mailbox on exchange server 2007.

    Hi, in our Enterprise environment, we have a single mac with Mavericks version 10.9.2 and Office for Mac 14.4.1. When setting up outlook, we are trying to connect to a mailbox on exchange server 2007. We put in the EWS details in the server field since our autodiscover function is not functioning. But still it doesn't work. There are no errors, no popups. We turned on the logging and in the logs, it says a error of -3259. We are stuck and any help will be really appreciated.

    I have a customer experiencing exactly the same issue. Their computer is running Windows 7 Pro with Office 2007 SP3. After seemingly exhausting all troubleshooting options, I backed up their data, formatted the hard drive and performed a clean install of
    Windows and all their applications. It didn't solve the problem!
    What's strange is the customer also has a laptop computer, running the same version of Outlook, and that doesn't experience any problems connecting to Office 365 on the same network.
    My next step is to send the customer a new ADSL modem/router to try.
    I have another customer on Office 365, also running Outlook 2007, and they also experience issues with emails sitting in the outbox while Outlook displays the status message “Outlook is trying to retrieve data from the Microsoft exchange server outlook.office365.com.”
    In this case Outlook doesn't freeze/stop responding, like it does for the first customer I mentioned.

  • The picture ID on my outgoing Mac mail  is not mine -- it's the photo of boyfriend of my mother in law is appearing as my ID photo.  I have no link or connection with anybody  or other accounts whatsoever, and I don't have ANY third-party networks myself.

    The picture ID on my outgoing Mac mail  is not mine -- it's the photo of boyfriend of my mother in law is appearing as my ID photo.  I have no link or connection with anybody  or other accounts whatsoever, and I don't have ANY third-party networks myself.    HELP!!!

    Nobody but you sees that photo, it does not appear on outgoing emails.
    To remove the picture rather than change it, open Address Book and select your personal card, then from the menubar select Card > Clear Custom Image. Now the system will use Apple’s generic user picture in the login window and System Preferences’ Accounts pane. Mail and Address Book will remain blank until you designate a new picture in Address Book or System Preferences > Accounts.

  • My imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I've

    my imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I’ve tried shutting it down and unplugging it, and that does not work -- I’ve run disk utilities checked permissions, and run anti-virus and get no adverse results – I cannot figure out what is different that causes this problem

    From previous experience 3 indicates a shutdown initiated by the SMC (System Management Controller) — hardware responsible for many low-level functions including power, sleep, lights, and fan activity.
    Try resetting it:
    Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
    Before Resetting the SMC
    Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
    Press Command + Option + Escape to force quit any application that is not responding.
    Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
    Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
    Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
    Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.

  • My mac seems to have a virus thats connected with a few apps i use and i can't use them without my computer glitching out even though i've reinstalled the apps a few times.

    My mac seems to have a virus thats connected with a few apps i use and i can't use them without my computer glitching out even though i've reinstalled the apps a few times.  It's very frusterating especially when i'm doing someting when my  computer randomly freezes or justs logs out for no reason when i'm using the apps.

    Matthew,
    if you boot your MacBook Pro in Safe mode, do those apps still behave in the same way?

  • Apple magic mouse keeps losing connection with Macbook pro

    I have a 2012 macbook pro, after upgrading to Mavericks(10.9.1, not have any other 3rd party software,just pure OS X), my magic mouse always losing bluetooth connection suddenly every one or two days. When losing connection, I found the bluetooth chipset type showing in macbook system information changed to unkown (FFFF). I have contacted with apple global support, and also have not gotten the solution. Just cleaning cache, and ect. but still didn't work.
    When I downgrading the OS X to 10.8.5 Mountain Lion, same macbook, same magic mouse, work very well. Never happened lose connection issue during one and a half month.  So, it should be a Mavericks bluetooth driver's issue, or something reletived.
    Any body have some good idea in solving this issue?
    Thanks in advance!

    I have the same problem with a 2007 MacBook Pro on Snow Leopard. As soon as I changed the mouse's batteries, it started losing connection every few seconds. The mouse came with Energizer batteries originally - they supposedly don't fit well, but the mouse worked fine. I exchanged them with Duracell, which gave problems. Now I have Varta batteries installed, they give problems too. The paper-trick doesn't work for me.
    Quite franky, I think it's rediculous that a fancy €69,- wireless mouse is so fussy about batteries. It's impossible to work with it. Is this just another way for Apple to get people to buy their batteries? I think a mouse this expensive should accept any and all batteries. Please, Apple: fix it. Seems like a really simple matter. Just put longer and stronger springs in the contacts for the negative poles.
    Thanks.

  • Laptop ONLY loses connection 9:00 p.m. every night

    We started out with one desk top computer connecting through Comcast.  We bought a second computer moved the first to the up stairs so we bought the WRT54G Ver. 6 wireless router.  Both computers worked fine.  My husband recently purchased a laptop which is connecting through the router.  (VIsta) Now for some reason EVERY night at 9:00 p.m. on the dot neither the lap top or the upstairs computer will connect to the internet.  The downstairs desktop connected directly to Comcast will connect.  There are no issues with the direct connect to Comcast  at 9:00.  The inability to not connect last for a couple hours but it is every night at 9:00.  Any ideas?  Thanks.

    If you go into the settings on the WRT54G it gives you the option of when to allow use of the wireless, you may go and check if it is setup to block access at that time. You can access the settings by typing 192.168.1.1 or whatever your ip address could be into your browser.

  • Apple TV losing connection with iTunes on Windows

    I am running iTunes on both an HP MediaSmart Windows Home Server (WHS) and a newly installed Windows Vista system.  I have multiple Apple TV's around the house - both ATV2's and ATV3's.
    I was using the MediaSmart Server as my main iTunes server for Apple TV streaming.  That was the system's only function.  Unfortunately, I was constantly restarting iTunes and/or the system as my Apple TV's would lose connection to home sharing.  I thought WHS was the problem so I set up an unused computer to install Windows Vista (only license I had laying around) and installed iTunes.  Everything seemed to work fine for a few days then I started losing connection to that iTunes also.  I turned off the WHS system thinking it was causing the other iTunes to choke.  That did not help.
    For reference, All of my computers are hard wired and I have some ATV's that are hard wired and some that are using wireless.  Wired or wireless....the problem still exists.  Also, I have competely disabled anti-virus and the firewall on both iTunes servers.
    I can watch multiple movies at one sitting.  However, if iTunes is idle overnight (or even for a few hours it seems), my Apple TV's can not re-connect to home sharing and I need to restart iTunes.
    Last night I disabled the AppleMobileDeviceHelper and the iPodService services hoping that would help.  I have not had a chance to fully test this out yet, but did stumble across quite a few posts where MANY others are having tjhis same issue.  Many are saying it has to do with the ATV3's sleep mode.  If I recall correctly, my major problems did seem to start about the time I got my first ATV3.  When I get home tonight I will disable the sleep mode on all of my ATV's.
    Here is the question...just in case that works:  Is powering off the device by holding down the play button the same as allowing the device to "sleep"?  I ask because I use Harmony remotes and I have programmed them to power off the Apple TV when turning off all devices.
    As I said, I have multiple ATV's (7 to be exact - 3 ATV3's and 4 ATV2's) and would hate to leave them all on all the time just to fix this problem.
    Any feedback would be appreciated.  It is difficult to discern a solid solution from the 400,000 other posts on this topic.
    Thanks.

    Sorry, I updated another thread I was a part of but didn't update my own thread.....ughhh!
    I updated all of my ATV 2's and 3's to the latest firmware when it was released and have been problem free since. I do believe the major issue of not being able to connect after a period of inactivity has been corrected with the latest ATV firmware.
    I can look at my network connection table using "netstat -an" in a CMD window and I do not see the massive number of connections I saw before the update.
    Here is a link to the other thread I was referring to above:
    https://discussions.apple.com/message/19952545#19952545
    Have you applied the latest firmware updates to your ATV 3's?

  • Losing Connection with WRT54GS

    Hi All,
    First off I apologize if this concern has been noted and solved elsewhere on these boards. I recently moved into a new apt with a friend, we went with Comcast for our cable/internet set-up, and upgraded internet. Since I have a cable wire in my room we set-up the Comcast modem in there, as well as the new WRT54GS router I bought from Linksys, with the speed booster, not sure if that makes a difference. My friend is connecting through the router with a USB G card (also speed booster). Everything was working fine for the first 8-10 hours, the connections and hook-ups are all correct, but in the last 48 hours I have found that I have been losing my internet connection (I’m wired to the router). The linksys software has been diagnosing this problem as “Another network detected” and basically telling me that I am no longer connected to my router. In short, to fix the issue all I have to do is unplug the router, plug it back in, and wait 15 seconds and I’m back online. Obviously this isn’t a huge issue but it is getting rather annoying, especially since it seems to go offline every 2-3 hours after I fix it with the same issue. I have called linksys but was unable to get anyone the first time, so before I try again I was hoping that perhaps someone on these boards had a similar issue, or could at least tell me the direction to take, if its most like a router issue, or perhaps Comcast issue, in that maybe my wiring or modem is causing the problem. There are several other wireless networks in the area, I’m not sure if it could be an interference issue as well. The peculiar part is that my roommate has not lost his connection during my down time….
    Thanks in advance for your help
    Regards
    EMS

    I'd like to see some input on this one as well.
    I have the WRK54G and it is doing the same thing, it started about 3 weeks ago losing it's connection every 2 or 3 hours.
    I just reformatted my system (for an issue not related to the router obviously) and now it's losing connection every couple of minutes then reconnecting.
    The Linksys connection software won't even let it connect, but the default windows software will at least let it connect for a little while, it's getting pretty frustrating.
    I've had to wait for it to reconnect 3 times just while typing this.Message Edited by Douglajl on 03-20-200702:56 PM

  • Keep losing connection with EA6500

    I have an EA6500 router that I have to power down at least once a day to regain connection to the internet. And every few days I've been having to factory reset the modem to get back online. Is there a setting that I need to change to fix this? Doing either type of reset from the router page doesn't work either, it has to be either unplugging the router itself and plugging it back in, or sometimes the hard-reset by holding the reset button in. I am using a Comcast-supplied modem, Arris model# TM722G/CT.
    When the router is working I love it! But losing connection during games, school tests, or backups is really getting old!

    Try to isolate the problem by connecting the computer for at least 24 hours, directly to the modem. In that way, you will be able to determine if the problem lies with the router. Upgrading the router to the latest firmware and to reset the router could help resolve the issue. Changing the router’s mtu size: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=fbf8e8564632422eaa8ea80bf9dcba64_386.xml&pid=80&re... could also improve the router’s performance. In case the router would still have the same problem, then might as well contact tech support to report that issue or have that router replaced.

  • HT1218 Does anyone else have a constant problem with losing connection with smart phone due to airport

    phones are constantly searching for internet connection My time capsule/air port is always losing internet connection----anyone know how to solve this?

    Wireless interference is probably the cause.
    If there are competing wireless networks in your area, there is little you can do other than to use 5 GHz with all the devices capable of it. For iOS devices, only iPads and the newest iPhone is. Macs have supported 5 GHz for many years.

Maybe you are looking for

  • ASA 5505 external interface dying

    Hi, We have an ASA 5505 ( version 9.1(2) ) that frequently stopped functioning ie the external interface refuses to pass any traffic , ASDM wont connect,etc. The internal interface does continue to function and if we SSH into the unit and do a reload

  • Can I scan  line art (B&W drawings) into Elements and then fill them with color?

    In Photoshop CS I could do this. Can this be done with Elements? All I see under "IMPORT" is importing from a camera. Can I import something I have scanned as well?

  • ORA-55714: savepoint savepoint disabled with interleaved changes across..

    We have a PL/SQL program that is called by OAF page and has savepoint logic used in it. We are getting the below error when we call the OAF page. ***Error*** ***ORA-01086: savepoint 'START_ATP' never established in this session or is invalid ORA-0651

  • Recovering form files needed for preview

    Can someone please help. I have accidentally deleted form files that allow me to preview my forms and make changes to the forms using drag-and-drop from the palette. Is there a way that I can regenerate the form file? Thanks

  • Serial Nos while doing PGI in the Delivery

    Hi Everyone, Please guide me for the following query: After selecting an item line and then clicking on option for Serial No. on the screen, no screen is being appeared for entering the Serial Nos. Note: The Material is a serialized material. Please