Losing extended list of page sizes in Adobe PDF printer

I have Acrobat 9.0 Pro installed on Windows 7, and use it with Autocad 2011 x64 (no PDFmaker! very irritating, but another story).
From time to time, the Adobe PDF "printer" loses its extended list of page sizes, including the ARCH oversized page sizes. It appears to revert to the list one would see in Acrobat 9.0 Standard.
Usually, going to Programs, and doing a repair installation restores the list, though the first attempt to repair doesn't always seem to take.
Still, I would like to understand what is causing this breakdown, and prevent it, if possible. Any ideas?

Have no clue, unless it is that you are running a very old version of AA 9. Updating to AA 9.5.1 might resolve the issue.

Similar Messages

How to allow domain users to customize page Size in Adobe PDF printer.

Hi all,
I am not able to customize page size in Adobe PDF printer when I logged in with Domain user login. But I am able to Customize PDF printer in admin Login.
I need a solution to allow Domain users to customize page size for Adobe PDF printer.
Looking for a solution ASAP
Regards
Nagesh

Oops, I misread your question, so I edited my response.

Can only print one page to the Adobe PDF printer "device".

When I print to the Adobe PDF printer device I can only print one document. When I print a second document I get the message "Adobe PDF Creation cannot continue because Acrobat is not activated." However, if I reboot, I can again print a single document.
I'm running Windows 7 pro-64 bit. I have Adobe Acrobat X pro, version 10.1.7 installed AND ACTIVATED.
Any suggestions for solving this damn headache would be much appreciated. I'm sure tired of rebooting to print PDFs.
George Sundell

OK, here are a couple of ideas to try....
Go to Help and try Detect and Repair.
If you have Acrobat, you can try to distill the document or try a Save As
[signature deleted]

Adobe PDF printer and "Start printing after last page is spooled"

Hi,
After calling the Belgian Support for Adobe Product, I'm trying to have some information here.
Hope to get some help.
We use acrobat pro XI on windows 7 client and when we print a test page with the "adobe pdf" print queue on network share, we get a printing error when the "start printing after last page is spooled" is selected in the advanced tab of the printer queue. (document is not generated, and stay in the spooler with an error).
This problem is not present if printed localy or when we use the "start printing immediately" or "print directly to the printer".
The support agent from adobe Belgium told me that the reason is generating adobe pdf on network share is not a supported operation. We have to save the document localy all the time.
Is it really an answer from Adobe ?
Do you have an other explanation ?
Thanks for your help,

Thanks for your very good explanation Dov.
We use Adobe livecycle for this kind of purpose.
The situation described is diffrent, but you completely repond and I will be able to have some element to find a solution.
In fact, I'm implementing a softwate called DeviceLock, used to control connected devices (usb, network, drive). But this software, once installed, change the local printer parameters from "print directly to the printer" to ""start printing after last page is spooled".
As we use redirected folder in our environment and users cannot use local drive (for user's data backup) you will understand the problem.
Of course, we should be able to force the correct settings back, But Devicelock seem to change this settings after policy refresh.
I have contact with Devicelock about this problem of course as their software modify the settings, but was looking for a reason why we were not able to use the "start printing after last page is spooled" parameters with adobe Printer.
Thanks for your explanation,
PS:The driver's dialog won't prevent you from setting “Start printing after last page is spooled” or “Print directly to the printer” but setting either of those options will cause the operations to fail as you note.
note that only "Start printing after last page is spooled" cause an error and this, only for network share location. The "print directly to the printer" or the "start printing immediately" work fine either on a local drive and a network share

Acrobat X Pro v10.1.9: Cannot print to Adobe PDF Printer (access is denied)

Hello.
Suddenly I was not able to print Office 2013 files / Autocad files / Internet Explorer pages directly to Adobe PDF Printer anymore on my WINDOWS 7 Ultimate x64 sp1 computer.
I have tried to uninstall and reinstall Acrobat X Pro, but the issue was not resolved.
Neither after updating to the latest version (10.1.9).
When I try to print from any software (Office 2013 / AutoCAD 2012 / Others), are displayed two windows:
a) the first one named "Printing (not responding)", with the information: "now printing the file..."
b) the second one named "Save PDF File As", to where I do not have access to the filename fied to insert it neither to click the "cancel" button to abort the print dialog. It seems that this window is not active.
I have to click on the red "X" button on the first window to shutdown the application. Here is the error dialog I got:
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangXProcB1
Application Name: EXCEL.EXE
Application Version: 15.0.4551.1510
Application Timestamp: 528bece9
Hang Signature: c8e1
Hang Type: 32
Waiting on Application Name: acrotray.exe
Waiting on Application Version: 10.0.0.396
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Hang Signature 1: c8e100fcd630e6760c7abd2fba3f982e
Additional Hang Signature 2: ae17
Additional Hang Signature 3: ae17043737b8c27016deab1151342ddf
Additional Hang Signature 4: c8e1
Additional Hang Signature 5: c8e100fcd630e6760c7abd2fba3f982e
Additional Hang Signature 6: ae17
Additional Hang Signature 7: ae17043737b8c27016deab1151342ddf
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
When I try to print a webpage in Internet Explorer using the same printer, I get an "Adobe PDF" window stating "Access is denied".
Can anyone help me restoring this feature?

The reinstall is typically the last ditch effort to do. The first step is Help>Repair and Help>Updates. As far as Office 2013, the PDF Maker of AA X is not compatible and you can only print. In your list of errors it showed a problem with AcroTray.exe. As a first step, go to the print and select print-to-file. The file will be a PS file (maybe with a PRN extension). Once the printer if finished, open the file in Distiller to complete the process. If that is successful, then the problem is with AcroTray. Check your running tasks to be sure AcroTray is indeed running. If not, that is likely the problem. If it is, then restart it (it is located in the Acrobat folder). AcroTray provides the interface between the PS creation and Distiller to automate the process of creating the PDF.

Adobe PDF printer 'printing' garbage characters

Acrobat Professional v9.5.0 (Acrobat reports there are no updates available)
Windows 7 Home Premium 64-bit
I print from various applications and web pages to my 'Adobe PDF' printer to save things as PDF files.
Over the last several months, I have begun to have issues with printing to my Adobe PDF printer. This issue happened twice just yesterday, actually.
I will be looking at a web page, and choose to print it to PDF (a purchase receipt for example). I supply the filename and choose to print, and Acrobat will bring up the newly created PDF and it will have garbage characters in various places.
If I try printing it to PDF again, I get the same results.
However, if I print the item to Microsoft XPS format, it works just fine and all the characters are readable.
I don't know what to do. I saw an article about embedding the fonts, but it appears that all the standard 'web safe fonts' are already set to be embedded in PDF files via distiller (if that is what is actually doing the printing to create the PDF). If I have to choose more fonts to embed into the PDF, it seems to be extremely difficult to determine what fonts are being used by each site or application and choosing them all manually to be embedded in the files.
Surely there has to be a simpler solution to this issue.

I too had this annoying issue, usually printing from https sites, although the site address may be coincidental.
What worked for me was:
Select Print
In the print dialog box, select Adobe PDF and then Preferences.
In the Printing Preferences dialog box the tab should be Adobe PDF Settings
Uncheck the box next to Rely on system fonts only; do not use document fonts
Select OK
If the box is already unchecked, it might be caused by something similar. This worked so I went no further. I have not yet checked to see if this must be done each time or how to make it default.

FireFow freezes when printing to Adobe PDF printer

Hi,
I regularly but not always have FireFox freezing when printing a page with the Adobe PDF printer (not with the plug-in but by using the "print this page" button on the page I visit or by clicking File > Print . The only way to get out is to kill FireFox.
Most often, I can eventually print the page after restarting FireFox and regaining access to the page. The trouble is that the page may no longer be available if the site requires identification and starts a new session ( ignoring the previous one).
This is annoying.

This is as much as I know about that add on [http://helpx.adobe.com/acrobat/using/using-pdf-printer.html] Have you checked the printing preferences or made any changes recently?
It is also possible to reset the printer settings: [[Fix printing problems in Firefox]]

How to allow domain users to customize Adobe PDF printer page size in Printer Preferences

Hi
I am able to customize Adobe PDF printer page size in Printer Preferences in admin login but not able to customize Adobe PDF printer page size in domian users login...
can I have a solution to customize Adobe PDF printer page size in domin user login

WOW! I was amazed to see that within minutes of posting my initial thread, I tried something that works.
Apparently, the only way is will actually convert is if you select the regular Print option in the File tab. Then, change the Printer to Adobe PDF & the Paper Size to 11x17. It also worked for 36"x48" becuase I created a custom size named "Poster", so I changed the paper size to Poster & it worked!
I hope this helps someone. I searched for an existing forum on this issue off & on for MONTHS before creating this thread. If anyone has any suggestions why the Adobe PDF tab /PDF Maker wouldn't work, I'd like to know.

How can I change the default page size for the Adobe PDF Printer?

Hello All,
I have cases where I need to switch the default paper size from 8.5x11 to 11x17 via api for the Adobe PDF Printer and have not been able to find how this can be accomplished.
I am using C# .Net and would appreciate any help.
Thanks in advance,
Bob

There is no Acrobat API for this, but so far as I know there doesn't need to be. The user can go change this from the Printers Control panel as needed. The Adobe PDF printer has some differences from regular printer drivers, but this isn't one of them.

PDF Size jumps when printing to Adobe PDF printer redirected vs. locally installed

I have a Server 2008 R2 setup to run Sage Peachtree as a RemoteApp. RemoteApp is configured to pass local drives and printers through to the server for end user ease. When you print an invoice (or any file from Peachtree) to the Adobe Acrobat
X "Adobe PDF" printer that has been redirected, a single page pdf will save at about 1.1mb. If I print the exact same invoice to a local install of Adobe Acrobat X "Adobe PDF" printer on the Server 2008 R2 install, it will save to
about 8kb (which is the expected size for a single page pdf of lines and txt).
If you then try and print the 1.1mb pdf file to a normal HP printer PS (postscript) driver, it will expand in the print spooler several magnitudes to about 10-15mb, giving the impression that it sees the pdf data as an image instead of txt.
My guess is that the data being sent over the remote desktop connection to the redirected "Adobe PDF" printer is coming out of the pipe in a form that Adobe can only interpret as a graphic and thus compresses it as though it was one.
Anyone have any ideas on how to the local printer and the redirected printers to receive the same type of data and thus create pdf files of similiar size?

I suspected as much. I was hopeful it was something like a setting that needed to be changed or a reg hack that needed a bit changed from 0 to 1 to make the printing work as expected. I only installed the local printer to see if the RDP session
tunnel was in fact causing the print size to balloon so I will continue to instruct users to use that instead of the local redirected printer. I am disappointed but not surprised.
Edit:
Additionally I have tested the functionality of setting the GPO settings for Easy Print to use the redirected printer's drivers instead of the ones used by easy print, by setting “Computer
Configuration -> Administrative templates -Windows Components -> Remote Desktop Services > Remote Desktop Session Host -> Printer Redirection”.
to “Disabled” but
with no luck. In fact the printer received the proper Adobe PDF driver, but the job went out into print spool hell and was lost to the ether. I have concluded that this approach will not bear any fruit.

Adobe PDF printer not listed using Acro8Pro

Using AcroPro8 and Win8 I don't have a the Adobe PDF printer available from my list of printers. When I install AcroPro7 it returns. ANy ideas?
Thanks,
Mart

Sorry for the misunderstanding. Perhaps I could put it more clearly: "Since you have upgraded Windows, it is time to also upgrade Acrobat". The only version currently sold is XI (11).
I observe from this page http://www.adobe.com/uk/products/acrobatpro/buying-guide-upgrade-pricing.html that upgrade pricing for Acrobat 8 is only available until May 31, 2013. After that, a full price purchase will be needed.

How do you can change the page size of a pdf in MAC? I have multiple pdf documents of different sizes that I want to combine.

Help. How do I change the page size of a pdf in MAC? I have multiple pdf documents in varying sizes I would like to combine and print.

There's no real need to do that. A PDF can have pages of different sizes.
On Fri, Jun 6, 2014 at 4:11 AM, christine rambo <[email protected]>

Firefox 4 beta 12 can't print a page to adobe pdf printer unlike ealier versions

instead of bookmarking a page, I'd print to adobe pdf printer so I can always access offline but now it is no longer possible with firefox 4 beta 12. at first I thought adobe acrobat professional was corrupted so I repaired it - but I still had the same problem. I have installed acrobat professional 8 but nothing has really changed.
Mark.

This nasty bug is a known problem caused by the beta 12 update. You could wait til' the RC comes out, or you could grab one of the latest nightly builds availible here that fix this problem: ftp://ftp.mozilla.org/pub/firefox/nightly/latest-mozilla-central/
Just a note though, nightly versions of firefox are generally less stable than betas or releases. I am waiting for the Release Candidate to come out myself. (Should be early next week)

How can I change the page size of a pdf so i can view it on my iphone more clearly?

How can I change the page size of a pdf so i can view it on my iphone more clearly?

I think there may be more to this question than you say.
If your PDF page is say, 8 x 12 inches, and you found a way to scale it to 25%, changing it to 2 x 3 inch, shrinking everything on the page to quarter size - wouldn't it look exactly the same on the iPhone? It's just going to be the same as zooming.
Or were you hoping for something more like in Word, where changing the page size keeps everything the same size and spreads it over more pages? That isn't something you can do.

How determine page size by opening PDF file in binary mode

Hi,
I have to print PDF file but I would like to know the page size of the PDF file.
What I have to verify (section, parameters) in order to know the page size? (Letter, Legal)
Thanks!
FE

And if you multiply the values by (1/72):
(792 - 0) / 72 = 11
(612 - 0) / 72 = 8.5
You may also have to consider rotated pages and not all pages within a PDF will match the size of the first page.
Using Acrobat JavaScript:
var nPage = 0;
var cBox = "Crop";
var aRect = this.getPageBox(cBox, nPage);
var width = aRect[2] - aRect[0];
var height = aRect[1] - aRect[3];
console.println("Page " + (nPage + 1) + " has a width of " + (width / 72) + " inches and a height of "
+ (height / 72) + " inches");
Produces the following output on the Acrobat JS debugging console:
Page 1 has a width of 8.25 inches and a height of 11 inches

Losing extended list of page sizes in Adobe PDF printer

Similar Messages

Maybe you are looking for