Losing Home Sharing connection on Apple TV when Mac goes to sleep

Just got the 2nd gen Apple TV all setup with home sharing to my Mac Mini library with all the wake on sleep options activated in OSX as well as the latest Airport Extreme router. However, when my Mini goes to sleep, the AppleTV eventually loses the connection and I have to physically wake up the Mac to get the library back (it's in a different room of course). If I connect via my laptop, iTunes still shows the Mini still active like it should (ie. everything is setup correctly and it wakes up when accessing the library)), but it looks like the AppleTV implementation isn't doing the same (perhaps Apple can fix this in an update). Has anyone else successfully been able to access the home sharing library once the Mac goes to sleep? I'd hate to have my Mac on all the time and thought the whole purpose of the new Airport Extreme and wake on LAN options in 10.6 Snow Leopard was to be able to do this. Any suggestions or tips? Thanks

I have a similar but slightly different problem. My Mac never goes to sleep so that's not my problem. My problem is that I sometimes work from home over a secure VPN connection. While logged into the VPN the Apple TV cannot see the iTunes server, which is behavior I expect. But when I log out of the VPN network the Apple TV will still not see the iTunes server. I have to turn off home sharing, and turn it back on. Or quit iTunes and start it back up. Then the Apple TV will see the library. I think my issue and your issue have the same root cause.

Similar Messages

Lose AE connected printer on MacBook when G4 goes to sleep

I have a HP PSC750 connected to my AE, which I set-up on my G4 desktop. Everything works fine until the G4 goes to sleep. When it goes to sleep I lose the printer availability on my MacBook.

Hello TuAnhLe,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Best of luck,
Mario

HP Officejet 4620 All-in-One Loses Connection to Wireless Network When It Goes Into Sleep Mode

My HP 4620 All-In-One wireless printer works fine until it goes into sleep mode. Once it goes into sleep mode, it doesn't wake up if a print job is sent to it. If I wake it up manually by pressing the blinking on/off button, it still doesn't print. If I completely turn it off and then on again, the print job that was queued on my computer will start printing, but that's a huge pain and waste of time nearly every time I want to print. I've installed all available updates. I also assigned a static IP address in an effort to correct this but nothing helps. I see that others have complained about this problem, but I do not see that anyone has had success resolving this. My operating system is Windows Vista. I use a Link-Sys Wireless G Router. Thanks.
This question was solved.
View Solution.

so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

My Home Sharing connection on Apple TV stops after 35 minutes. I have to go back to the computer, cancel Home Sharing in iTunes, restart Home Sharing and then it continues to work for another 35 minutes. How do I get it to continue running?

I thought that this was caused by the Energy Saving setting in Preferences, but I reset the shut down time to "Never" and it continues to happen. Is there some other setting that I need to change?

Go to;
-System Preferences
-Security & Privacy
-Firewall-Unlock to Make Changes
-Advanced
-Untick 'Log Out After XXX Minutes of Activity or Enter a Figure of Maximum Minutes You Think You Will Use Your Apple TV
-Click OK
-Relock
Issue Resolved
John B

Losing connection to wireless internet when computer goes to sleep

I have a Macbook, with OS 10.5.6. I connect to internet via airport connected to internet via belkin router. When I close my macbook to put it to sleep i keep losing the connection to the internet. The airport is connected, its only the internet connection that is lost.the only way round this is to restart the airport or belkin router, when the connection is restored. does anyone know a solution to this problem?

Similar symptoms here. Fortunately my MBP "recovers". When I made some experiments with VPNs yesterday, I noticed, when switching the network environment, that the computer is requesting a new IP address. Maybe this will also happen when the Mac wakes up? And maybe the router doesn't respond properly? I would try to set a fixed IP and see what happens then.

Mavericks 10.9-10.9.1 bug/issue/problem: external drives connected through thunderbolt or firewire are not put to sleep when iMac goes to sleep

Previous to Mavericks (10.9 - 10.9.1) I've had no issues with external firewire or thunderbolt connected drives to be put to sleep. However, since Mavericks all of my external drives are not put to sleep when my iMac, or Mac Pro go to sleep.
How can a company such as Apple, pushing people to have external devices like hard drives, is not on top of fixing this issue? Apple pushed for firewire and thunderbolt, thus All external drives I've owned are firewire. Because of speed. I bought thunderbolt adapters for firewire, and before Mavericks all worked great. Now that we have 10.9.1 update, this is still an issue!
I'm aware of the temporary solution of connecting the drive through USB to make it work, this is not a solution, but a hack.
Please let Apple know that this is a known issue, and there should be a fix for it. Everyone's data depends on it! Not only current external backups, but also external sensitive hard drives we rely on. Currently, the following makes are experiencing this issue: Lacie, OWC (Elite Pro), WD, Promise, Seagate, Toshiba, G-Drive.
Other Apple Support Communities related thread:
https://discussions.apple.com/thread/5486167?start=60&tstart=0
https://discussions.apple.com/message/23541363
External References:
http://blog.macsales.com/21004-upgrade-to-mavericks-drama-free-with-owc
http://forums.macrumors.com/showthread.php?t=1659332&page=3
If anyone finds how to solve this issue, please help by posting the steps or solution.

Same 2 issues with 10.9.3:
External FireWire drive WILL NOT spin down when Mac goes to sleep.
also
External FireWire drive WILL NOT spin down for inactivity despite “Put hard disks to sleep when possible” is checked in energy saver.
This has been going on since the launch of Mavericks and no solution found yet.
USB ports work normally.

Airport drops my connection when it goes to sleep

My iMac always drops my connection to my network when it goes to sleep How do I fix this?

I have tried some minor fixes I saw recommended. Last tried was deleting 6 plist items from library. I have to wait and have it go to sleep to tell if it works.
I have 10.8.2 running on my imac. I have to go now but will check thus discussion upon my return. Thanks John

Printer loses wireless connection when it goes to sleep?

My printer loses wireless connection to my router when it goes to sleep and I have to input the WEP key again. As long as the printer is awake it works fine. The wireless light remains on.
Printer is HP Officejet Pro 8500A Plus and the router is a Verizon 7500.

If you mean WPA, that is good.
Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HT1600 I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing? I am able to get the 'Home sharing' 'user and password on my Mac.

I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing?
I am able to get the 'Home sharing' 'user and password on my Mac.
Also using IPad 2 I am able to get the ITunes to accept the user name and same password as the Mac.
However, the only way I can see the 'Home sharing; icon is in Music on the Ipad. When I tap on the Icon it asks for a password.
When I give the same password, it is rejected.
Help!!!!
Jaxxdiggs

Personally I think the iOS devices are poor at reconnecting - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
Something along those lines anyway.
I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
AC

Apple TV 3 home sharing connection issue.

Every time I turn my Apple TV on it is unable to connect to the iTunes library on my computer. My computer is on the same wireless network with iTunes open. The only way I can get it to reconnect is to turn off home sharing on the Apple TV and then turn it back on again. It is then able to reconnect.
I am running the latest software version on the ATV.

For me, it looks more and more a problem with my iMac waking up from sleep and not so much a problem with the Apple TV.
With Snow Leopard wireless wake on lan was working. With Mountain Lion, this is not working anymore. I tried several things (restart Airport Extreme, SMC en PRAM reset, configuring WiFi connection again, ...) but I can't get wireless wake on lan to work. And because my iMac won't wake up from sleep, the Apple TV can't reach the iTunes library.
I have the same problem when I start the Remote app on my iPhone: because the iMac is sleeping, it can't reach the iTunes library. When I go upstairs and wake my iMac, Remote can access the library.

I am trying to set up home sharing between my iphone 4s and mac which is running itunes 11. Both are connected to my home wifi network and using the same apple id but on the iphone app it says 'Turn on Home sharing in iTunes on your mac using account ***

I am trying to set up home sharing between my iphone 4s and mac which is running itunes 11. Both are connected to my home wifi network and using the same apple id but on the iphone app it says 'Turn on Home sharing in iTunes on your computer or apple tv using account ***
Does anybody have suggestions as to why this is the case?

Understanding Home Sharing - Support - Apple
Hope this helps.

Apple TV dropping home sharing connection

Previous setuo with my Mac mini and Apple TV 3rd gen was fine, wired network connection.
New setup with MB Pro is wireless connection, ATV keeps dropping Home Sharing. Both on same network.
iTunes is up to date and so is ATV. I have to log out of iTunes Home Sharing, log in and then sometimes
have to restart ATV. Not sure what is going on. I have MBP set not to go to sleep and to wake on wifi.
Very frustrating.

Hi there BaldElvis,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
-Griff W.

My home sharing on my apple tv isnt connecting to my laptop, how can i fix this?

my home sharing on my apple tv isnt connecting to my laptop, how can i fix this?

The following article(s) may help you.
Troubleshooting Homesharing

Home Sharing between 2 Apple ID accounts on separate PCs...can our iOS devices access both?

Hi All
Hope someone can help. My wife and I have separate iTunes accounts with separate Apple IDs on separate PCs.
We both have HomeSharing turned on and can access each others music libraries from both PCs which is great. However when I try to access the home shared libraries from our devices (I have an iPhone 4 and an iPad 2, and my wife has an iPhone 5) when connected to the home network I can only see my own shared library on my devices and my wife can only see her own shared Library from her iPhone 5.
Just for background we are both running the latest iTunes and are on win7 PCs, my iPhone 4 is on iOS7, the iPad 2 and iPhone 5 are currently running iOS6
Is there a way to see each others shared libraries on all our devices when we connect to the home network through wifi?
Many thanks!
Chris

Hello Chris G Shirley,
In order to do this, you would need to switch between the two Apple IDs used on each system in Settings > Music.
On iPhone, go to Settings > Music, then log in to Home Sharing using the same Apple ID and password.
iPhone User Guide - Home Sharing
http://help.apple.com/iphone/7/
Cheers,
Allen

I have to restart iTunes every day to access my home sharing on my Apple tv

I have to restart iTunes every day to access my home sharing on my Apple tv, Apple had me turn off the firewall on my computer that did not help This happens on all my 4 Apple TV's only 2 are wireless but it mainly happens on my wired Apple TV's. the rest of my network works fine

Exact same problem since a long time. Started after an ITune upgrade 6 months ago if I remember correctly.
Im using Home Sharing. I have IPad,IPhone and 2 Apple TV one 2nd (Wifi) and one 3rd gen. Wifi provided by Apple Express. Home sharing work great on all device without interupting playback and/or disconnecting until I leave iTune server hosting Home Sharing idle for something like 2 hours. I have tried many time to access Home Sharing from any of my Apple device before that said 2 hours idle and it connected properly. Like you, it mostly happen overnight while iTune is idle for a long period. When it happen, all devices stop detecting ITune Home Sharing. Remote Apps and/or Music Home Sharing can't connect. Doing of one of the points down below temporarly fix problem on all devise and they connect right away until everything is idle again.
1) Turning OFF then ON Home sharing temporarely fix the problem (Until next idle).
2) Closing Itune also temporarely fix the problem.
Since long time (Before this problem started) I have ITune installed in a VMware virtual machine running Windows XP SP3 32bit on top of an VMware ESXi 5.0 host. First I though it was more of my unusual setup causing the problem. I have tried a lot of things. Scratch reinstall, removing firewall, removing all kind of power features on host and OS it self.No anti-virus, no other software installed. Running out of idea. Now glad to see some else have the exact same problem.
Will keep looking and post if I find anything.
What is your setup hosting iTune ? PC, Mac + version ?

Losing Home Sharing connection on Apple TV when Mac goes to sleep

Similar Messages

Maybe you are looking for