Losing I-tune purchased songs AFTER using "system restore"

I beg someone to help me. I will get to the point asap, but please be patient with my ramblings since the problem eventually gets to I-tunes.
1-I constantly get this message when launchig yahoo messenger or watching DVD on computer or wanting to listen to my I-tunes purchased/downloaded songs" "The computer's audio output is already in use by another application". Sometimes, I get a message which states that my audio configutation is not correct. This just happened recently. ANYWAY.
2-I decided to do system restore....and restored my system to an earlier version. THIS WAS great.....my audio configuration went back to normal. NOW, THE MAIN POINT:
3-After doing a system restore...I totally lose my I-tunes registration. Even though I restored back to an earlier time...I should still BE able to log back into my i-tunes and store and EXPECT to find my songs. But..boom the songs are gone..it is as if I-tunes never recognized me as a user/purchaser. AND yes, I restored my computer to an earlier time BEFORE I purchased songs from I-tunes. But I do not see how this can be an issue..since....I have alread purchased the songs..and I-tunes or Apple.com has me in their system.
So, my need is: getting my songs back, even though I did a system restore to an earlier date. Yes, I can use system restore again and go back to my recent restore point when I had I-tunes and I can find my songs..but....then...MY AUDIO configuration problem exits, again.
sorry for rambling.
Any help...would be be more than appreciated.
thank you
Gateway tower Lx3700x Windows XP

Phil, this link will explain how one computer use multiple authorizations & what you can do to get things straightened out. Hope this helps & welcome to discussions!
http://docs.info.apple.com/article.html?artnum=300161

Similar Messages

Accessing purchased songs after Dell System Restore

I recently had to restore my computer to factory settings, and had to re-download iTunes on my computer. I found that when I tried to listen to songs purchased at the music store, the computer was not authorized, so I had to use one of my five extra authorizations on my original computer in order to listent to the songs I bought. Is there a way to get the authorization back, or will I have to use one every time my computer crashes?

Phil, this link will explain how one computer use multiple authorizations & what you can do to get things straightened out. Hope this helps & welcome to discussions!
http://docs.info.apple.com/article.html?artnum=300161

Lost purchased iTunes after computer system restore

How can I retreive purchsed iTunes that I lost after I had my computer system restored? I re-loaded the iPod + iTunes disc and non of my songs seem available to me.

That is going to depend on what you mean by "restore". If you formatted your hard drive and did not have a backup then the music files are gone and you will have to re purchase them all. Same thing if you
If you still have your music files all you need to do is add them to iTunes. Go to File > Add Folder to Lib... and point to where the files are.
If you believe you still have the music files but do not know where they are try doing a search for *.m4p, or *.mpb, or *.mp3. If the files are still on your hard drive then that should find them.

After using system restore, can't reinstall firefox

I 'think' the problem was with Roboform. Using Firefox 7.0.2 my Roboform fill forms wasn't working properly after updating to a newer version so decided to roll back 24 hours using windows vista system restore. No luck. So thought that I could reinstall Firefox. Download went fine...when I ran the program, I got the following zev[zqz] flashing real fast with the crash screen saying Firefox has crashed send in a report and we'll get back to ya. Uninstalled..tried again. Same thing. Uninstalled EVERYTHING except personal data...Same thing. So installed IE 9 so at least I could come here and post...miss Firefox!!

Hello JMcIntee, # In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
# in the search area type '''College Shop''' and delete(with right-click) anything related.
then try the [https://addons.mozilla.org/en-us/firefox/addon/searchreset/ SearchReset] add-on, (the add-on resets your search preferences and home page to their default values, and then uninstalls itself).
any luck ?
thank you

How do you get back your purchased songs after you have restored your ipod?

hi my name is meagan i just restored my ipod and all my (purchased songs , videos , etc.) are gone and i just called the apple hot line and they told me this would be the best way and that you guys can help get my purchased songs back this would be greatly appreciated:) please let me know as soon as possible

Hi Meagan,
If you have sync'd / transferred the songs to iTunes prior to the restore (they would be listed under iTunes Store or within your library if so) then you can easily sync these across. If, however, you don't you will need to get in contact with iTunes Store Support so as that they can look at possibly reauthorising a download of them for you.
As an aside, with any purchases you ever make regularly backup and transfer the purchases from your device to your computer. That way you shouldn't lose them

How to transfer iTunes purchased songs from work system to home system

I have an itunes account set up on my computer at work and have recently purchased songs that reside at work. Unable to burn purchased songs on work system.
Signed in at itunes at home and unable to find songs purchased with same itunes sign in id at work.
How do I go about finding the songs using the same id.

They are on your work computer. You canot download them again (for free) from iTunes.
You need to copy them off the work computer.
Use an iPod or a removable drive.
You can email them although the file would be pretty big.
You can FTP them somewhere.

Ipod mini won't play purchased songs after 2 days.

Windows XP
ok this is really weird but my iPod mini won't play ANY of my purchased songs after 2 days of use. Then I have to hook it up to my comp and buy another song or download and then it will play the purchased songs. my mom has an ipod mini and doesn't have this problem. whats up with it?
thanks!

finally someone with my same problem, it has been solved though! what you do is you hook the mini to comp and then clik on the mini in source list, play purchased song, and then it should work

After i used system restore, firefox wont open

Tonight i had to use system restore and restored my computer to early this morning. Everything else works, i can connect to the internet if i use IE, but when i goto click on Firefox Icon it won' do anything now.

After you have tried to open FF, is the process firefox.exe running? you can check that in task manager. If it is, you are not the only one experiencing this problem see thread;
https://support.mozilla.com/en-US/questions/705984?page=3

Firefox 4 could not be made to show bookmarks on Vista 64bit. I used system restore to get back to older version. Now Firefox won't open at all even after undoing system restore

I use Vista 64 bit. Was fine with older Version of Firefox (3.6, I believe). Upgraded to Ver. 4. Couldn't access extensive bookmarks file or bookmarks toolbar. Tried all the Firefox help recs and they didn't work. Clicking the top button would give list of toolbars but when I tried to move to bookmarks toolbar the menu changed. Tried going thru tools and options and that didn't work. So decided to use System Restore to get old Firefox version back. Icons remained but program wouldn't open. Tried many ways, including start menu. Old version is still on program control file but only option is to uninstall. So went back to System Restore to get Vers. 4 back and it's not there. What to do?? I can use Google Chrome or Internet Explorer but I want all my 100's of bookmarks back. Thank you.

'''''<u>Users are overusing and misusing System Restore!</u>'''''
System Restore:
#is a way of protecting the '''''Windows environment'''''
#'''''may help to avoid a complete reinstall of the Windows Operating System'''''.
# should '''''never be used in place of un-installing an application and trying to replace it with an earlier version of that same application'''''
#'''''should generally be the LAST step in diagnosing/reversing a problem with the operation of Windows, BEFORE performing a complete reinstall of the Windows Operating System'''''
See this and related articles on the Microsoft site: http://support.microsoft.com/kb/959063

Win 7 x64 - Need to repair a single driver, but can't use System Restore

Basic Info - an HP/Compaq Elite 8200 Convewrtible Minitower with 2 extra SATA drives & a Creative SoundBlaster card installed.
Background: My system had begun going into Blue Screen (BS hereafter) every couple of days with a message that the BIOS was not "fully ACPI compliant." I contaced HP and was able to obtain & install the needed BIOS upgrade. Following this, I decided to do some housekeeping & checked for out-of-date drivers. I installed these one at a time, as I had a previous bad experience with updating too many drivers, particularly Intel chipset drivers, at a single time. When I finished the last update, which involved two drivers labeled IntStrA and IntStrB, if I recall correctly (I'm posting this from my PC at work, so I may have the names off by a character or so) my system began going BS after ~10 minutes or so. Nearly every BS referenced the MicroSoft system driver wdf01000.sys.
It is my belief that either wdf01000.sys became corrupted, or the last 2 updates were having a negative impact on the M S driver. Unfortunately, if I try to use System Restore to roll back the suspect updates, the system will BS ~1-2 minutes after the m essage "Restore is initializing" appears.
The only solution I can get from the HP Tech is to back up my data and then use the "Erase, Reformat & Reinstall" function from the Recovery Disks. Unfortunately, with a system that goes B S every 10 minutes, it is impossible to perform a reliable back-up for all 3 disks, while the Recovery Disk is only willing to back up my drive F:\, not my primary OS Drive, C:\ or my other drive, G:\ (the HP Recovery partition is drive D:\).
My questions are:
1. If the problem is a corrupted WDF01000.sys is it possible to obtain a reliable copy of & replace it? (The HP tech warned about the danger of obtaining a copy of a MicroSoft sysem file from the internet - a danger of which I was fully aware - but, isn't there at least one system in HP's possession running Windows 7 x64 professional? I should think a file supplied from HP would be sufficiently safe. However, when I raise the possibility with the tech, there is no response.)
2. If the problem stems from the last 2 Intel driver updates, is there a way to get a functional OS loaded from DVD that would peremit System Restore to run? My last system had Win 7 installed from MS media and, as I recall, once loaded, the use of System Restore was one of the repair options. The HP Recolvery disks only offer 2 choices - back-up (which would only cover drive F:\, with <10% of my 4+ years worth of data) or "Erase, Reformat & Reinstall." Following this course would put at risk ~90% of my data, not to mention the grief of reinstalling a great deal of software.
3. The HP tech tells me that, since Recovery is only willing to back up drive F:\, this is where the Recovered OS would be installed. This would give me the independently loaded OS I sought in question 2. However, I greatly fear that drive where recovery operated would be my primary OS drive, C:\. If this were the case, the result would be disastrous! I do have back-up via Carbonite, but I don't think this has been operating properly since the ACPI-related BSs began.
So -- any suggestions? Anything that gets me out of this problem without loss of data will be most sincerely appreciated!
Tom Filipi

Hello TomF,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that after running some updates your system is getting BSOD errors associated with the Windows file wdf01000.sys. Now I cannot claim to be able to get you a copy of that file. I am not sure just replacing it would resolve your issue anyways. I can do this for you I can tell you that first the HP Compaq 8200 Elite Convertible Minitower PC is a commercial product. You can do this at you may get more assistance by posting this on the commercial forums at Business PCs - Compaq, Elite, Pro.
Additionally, I would suggest you start your computer in Safe Mode and using an elevated command prompt run the command "SFC /SCANNOW". You can do this by right-clicking on the Command Prompt link and choosing Run as adminstator. Also, you can use chkdsk to run another repair on your files to see if they can be repaired.
The SFC /SCANNOW command will run the System File Checker to see if it can repair any corrupted system files where the chkdsk will do the same, but for ALL the files on your computer.
I am also providing you with resources on both below:
Use the System File Checker tool to repair missing or corrupted system files
Run Check Disk from a Command Line to Check for and fix Disk Errors
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

1.Backup to External drive 2. CoverArt lost after Windows system restore

I recently spent many hours searching for and applying cover art for my music which was mostly ripped before cover art was readily available.
Because of this investment, I want to be sure my library is fully backed up. I want to use space on an external drive, rather than DVD's.
I noticed as I added art, iTunes started acting sluggish. I thought it might be because of the new version or a recent Windows Vista update. So I decided to run system restore. I was appalled to discover that restore wiped out the art I had added. So I reversed the restore and the cover art returned. It became clear to me that the art must be stored in some other way than in the actual music file. I've searched the forum and found others who had problems with system restore, but no explanation of exactly what I should do if I want to proceed with a system restore. I use system restore several times a year and I have never lost anything in iTunes before I started adding cover art. I also never had a problem with sluggishness til I added a bunch of cover art.
My library is large at 3000 items.
Is there a way to compact or optimize the database to improve responsiveness?
Is there a way to backup to an external drive? Is it just a file copy and export library file?
If I export the library as an xml file before I do a system restore, can I then replace it after the restore and protect my cover art.

To be completely sure what you're doing please take a look at your iTunes Folder and see what Vista stores inside it. To find it, go to Start>Computer>Hard Disk C>Users>Your Name>Music>iTunes>.......
Please note there is an artwork folder PLUS a music folder!
My guess is that your system restore point pre-dated the time you added artwork to your iTunes files. (Celebrate that system restore still works for you--I have not been able to successfully restore for over a year now--Norton Internet Security causes system restore failures for many Windows users! I've tried to do this using Windows XP and Vista--and I can never successfully restore anymore.)
To fully backup your library, just copy the entire iTunes folder to another source--second hard drive, USB drive, or burn it to a CD or DVD, etc.
If you're experiencing "sluggishness" it may be due to the amount of RAM on your system. iTunes needs a great deal of RAM to run smoothly. You can choose to: increase the RAM on your system, OR, turn off cover flow/album view and see if things run more smoothly.

A few days ago(after a system restore) the firefox 15.0.1 crashes every time i opened(in a few secondes or in 1-2 minutes)

a few days (after a system restore )the firefox 15.0.1 chrashing and freezing every time i open it.in a safe mode i dont have any problem ,but i cant find if blame any addon or anything else.im unistalling and reinstall the update or older version(14 ,15.0)but the problem remain.what can i do?i have win 7 ultimate

If the problems arose after a restore from a Windows restore point you may need to resort to reinstalling Firefox, as sometimes Windows restores have been known to break Firefox.
Security software including Firewalls is another problem that can slow Firefox or cause it not to work. You need to ensure the security software recognises the current version of Firefox (Again I wonder if a Windows restore may have affected this also.)
* [[Configure Windows Firewall to allow Firefox access to the Internet]]
*also see [[Firefox hangs or is not responding - How to fix]]
If you are getting crashes are you able to provide the Crash IDs for a couple of recent crashes.
* see [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] <br/> they can be found by navigating to about:crashes
Also see
* [[Firefox does not work - Common fixes to get you back up and running]]
*[[Configure Windows Firewall to allow Firefox access to the Internet]]
Apparently you say there is no problem in Safe Mode, if so try Firefox with Hardware Acceleration off, if that helps then instead of leaving it off look at your graphics drivers.
* see [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems#w_turn-off-hardware-acceleration]]_turn-off-hardware-acceleration
* maybe your graphics driver rolled back on the restore, and needs reinstalling see [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]

Key board not working at startup. Have to use system restore.

The only way to get the keyboard working on start-up is by using system restore. Unplugging and reinstalling just brings up a cannot install message. I have tried uninstalling in the device manager and reinstalling in a different usb port but to no avail. The system restore is no big deal but every time I do it I have to download all my norton updates.
Model HP Pavilion HPE with Hp keyboard Windows 7

Hello again errola,
Thank you for providing your computer's information!
Since you have already attempted to connect a second keyboard with drivers installed, I recommend installing the Intel USB Controller Driver Update. This software package should help update the Intel USB 3.0 eXtensible Host Controller, which your keyboard is attempting to connect to.
If the keyboard is still not able to function after installing the update, I suggest Using Recovery Manager to Restore Software and Drivers (Windows 7). This should help re-install drivers for the hardware and original programs that came with the computer. After this process is complete, please follow up with the HP Support Assistant (Windows 7) to update these drivers.
Should the issue persist after re-installing the original drivers for your computer, I recommend performing a backup and recovery of your Operating System. To do this, please follow this document on Backing Up Your Files (Windows 7) as well as Performing an HP System Recovery (Windows 7).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

How do I get application manager to install products after a system restore removed them?

I had some issues starting the computer and had to use system restore to get it runnng.
But that meant that all the applications I installed using creative cloud were gone.
When I started the Application Manger, It read that all the applications that I had installed were still installed.
I don't know how to reset anything to reinstall what I lost. As you can see I says the installed programs are up to date. But they are not on the hard drive.
If anyone can help, thank you very much. Or I wait till they open tomorrow. Barry

Hi Mylenium
i did a Forum search upon AAM issues and came here.
My system and all installed CS6 Applications are running smoothly, just AAM shows some odd behaviour
Most needed applications are installed, but under the "All" Tab, AAM shows "install" on the right, see my screenshot below.
Contrary to that what is seen on the screenshot up there from user "Bar".
under "Updates" it shows all up to date (see screenshot below)
This way, I'm cannot be sure if AAM works correctly or not.
So i have followed your suggested advice and cleaned everythig up, downloaded and installed everything again, ugh!, but problem still persitis.
Usually it should show up which Applications are alredy installed, respectively are up to date and which application are still not installed.
Is there a known issue with AAM?
Thank you.

Uploading previous iWeb work after a system restore?

How do I upload previous iWeb work after a system restore?
I backed up my data on a Hard-drive then I did a factory reset or restore of my hard-drive....
Now I am attempting to open my previous iWeb work online and it is not working please help.....

Your domain.sites2 file is the file that iWeb stores all its data and it is this file that you need if you want to continue updating your website in iWeb.
It is found under your User/Library/Application Support/iWeb folder and then the domain.sites file.
Your user library is the one with the house and this is where your personal user information is stored as opposed to your System Library which is general and where iWeb is not.
If you don't have your domain.sites file then you will have to re-build your site from scratch as iWeb does not have the ability to read or open html files - so a previously published site - it is a one way street creating html files upon publishing.

Losing I-tune purchased songs AFTER using "system restore"

Similar Messages

Maybe you are looking for