Losing Itals When I Apply Styles

Hi,
I've started playing with InCopy templates, and I've run into a problem with maintaining italics when I place a Word file in a template. When I first place the document, it maintains the itals. But that text is in the Word doc's font, not in the font I want to use. So then I apply paragraph styles. But when I apply paragraph styles, the itals show up highlighted in pink. Is it a mistake I've made in setting up the paragraph style?
Thanks.

Create two character styles. Italic & Bold.
Then select all text, hit control-F.
At the bottom of the dialog box click in the Find Format area.
This will bring up setting. Go to Basic Character Formats and select a font style of Italic....hit ok.
Click in the Change Format Settings and select the Character Style of Italic(the one you just created)....hit ok.
Now Click Change All.
Repeat for Bold..or any other style you want to retain.
note: this will not work if the fields "Find what" and "Change to" are not blank.
Now you should be able to apply your style without changing the Italics and so on.
Hope this helps!

Similar Messages

How can I force a paragraph style without losing italic?

This has been annoying me for ages. I work on documents in Word, applying italic to book titles etc, and then import into indesign. I apply a paragraph style and three times out of four the bits of italic are preserved. However, the fourth time the paragraph style doesn't take (probably because of the presence of italic) and I have to force it to do so by using Alt-click. Invariably the italic is then replaced by roman.
It's happening just now with a whole lot of footnotes and endnotes in a book I'm working on and means I have to go back through them all, manually applying italic to my book titles and references. Is there any way to force an endnote/footnote paragraph style without losing the italic text?
Thanks for any suggestions,
Tom.

I'm not sure that forward planning is so necessary here.
If your only concern is losing italics when importing from Word, create,
in InDesign, an italic character style. Then do a search and replace
throughout the InDesign document (after you've placed the Word file)
searching for italics formatting, and replacing with your italics
character style.
That will prevent you from losing your italics formatting.
Repeat for bold, bold italics, superscript, subscript, and anything else
the author uses.
There are some scripts that help in this process (I think one of them is
called "preptext", by Jongware).
If you want a comprehensive solution that can find every type of
formatting override and creates and applies the appropriate character
style, check out my "Create Character Styles from Overrides" script,
available under the scripting tab on freelancebookdesign.com.
Ariel

When I apply Stationary to an e mail the saved custom style reverts to default. What am I doing wrong?

When I apply Stationary to an e mail the saved custom style reverts to default. What am I doing wrong?

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Divs being removed from parent div when a float style is applied

Divs being removed from parent div when a float style is applied
Hi All,
I hope someone is able to help me with the below issue.
I apologise if the questions I have been asking lately are really basic, I’m just teaching myself web design.
I really do appreciate the help you guys offer, so a big thank you in advance.
I am confused as to why I am not getting my desired effect for the below code. I am creating a website for someone and have structured the website in the following way:
<body>
<div id="wrap">
<div id="title"></div>
<div id="shopping_cart"></div>
<div id="content_wrap">
<h2 class="header">Header goes here</span></h2>
<div id="nav_bar">
<table>table goes here</table>
</div>
<div id="side_bar">
<h1>text here</h1>
<table>table goes here</table>
</div>
<div id="content">
<p>text here</p>
<div id="content_image"></div>
</div>
<div id="footer">
<div id="logo"></div>
<div id="flags"></div>
<div id="v_wd"></div>
</div>
</div>
</div>
</body>
Now I don't know if I am structuring my website the right way this is just the way that makes sense to me. It might not even be the source code that’s the issue and may be the CSS so I have also pasted that in below.
Now the problems I am having are as follows:
I want to have my whole site wrapped in one big div #wrap so I can centre the whole site. Within that div I want all my other divs (which some have divs inside those as well).
To start #title seems to fit inside #wrap without a problem but #shopping_cart gets push outside of #wrap even though it is inside the opening and closing #wrap tag.
My next div #content_wrap, it seems to be inside #wrap however the margin-top I have applied to #content_wrap pushes it down from #title not #shopping_cart even though #content_wrap is below #shopping_cart not #title.
The second problems seem to be with the divs that are or supposed to be inside #content_wrap.
h2 .header seems to fit inside #content_wrap without any problems. Now it gets really confusing, for me anyway. Any div I put below h2 .header which is inside #content_wrap doesn’t seem to actually go inside #content_wrap or #wrap they get pushed below #wrap even though in the source code they are inside the opening and closing div tags.
Also #side_bar and #content together equal 860px which is the width of their surrounding div #content_wrap so they should fit perfectly side by side. This I know ties into a previous discussion I raised in discussion (http://forums.adobe.com/message/4501038#4501038). I have taken Murry’s advice on board from this discussion and tried floating just #side bar to the left and left enough margin for #content to clear, I also tried floating both to the left. Nothing worked.
As I have been writing this I’ve gone through my code, all the above issues only occur if I float a div. If I float a div for some reason it removes that div from any div surrounding it and pushes it below every single div. I don’t know how to position my divs in the exact place I want without floating them but if I float they get moved out of their parent div and therefore aren’t in the position I want them in either.
If you are able to help me resolve this issue it will help me with all future projects. I really do appreciate any help you can give.
Kind Regards
Elliot
CSS
I have marked out where I would float a particular div */style*/ which I know would cancel that style. Therefore the problems I am having are with divs #shopping_cart, #side_bar and #content.
body {
background:url(images/body_bg.png) no-repeat center center fixed;
-webkit-background-size: cover;
-moz-background-size: cover;
-o-background-size: cover;
background-size: cover;}
#wrap {
height:auto;
width:895px;
margin:0 auto;}
#title {
Background-image:url(images/title.png);
height:67px;
width:895px;
margin-top:50px;
margin-left:auto;
margin-right:auto;}
#shopping_cart {
background: url(images/shopping_cart.jpg);
height:46px;
width:142px;
margin-top:15px;
margin-right:25px;
/*float:right;*/}
#content_wrap {
background:url(images/content_bg.png) repeat;
border:2px solid #666;
height: auto;
width:862px;
margin-top:15px;
margin-left:auto;
margin-right:auto;}
#nav_bar {
width:809px;
height:59px;
margin-left:26px;}
#side_bar {
height:auto;
width:285px;
margin-top:20px;
border-right:1px solid #666;
/*float:left;*/}
#content {
height:auto;
width:575px;
margin-top:20px;
/*float:left;*/}
#content_image {
background-image:url(images/couple.jpg);
height:184px;
width:271px;
margin:0 auto;}
#footer {
background-color:#0F0;
width:860px;
height:200px;}
#kejo_logo {
background-image:url(images/kejo.png);
height:100px;
width:227px;}
#flags {}
#viscari_wd {}
#copyright {}
#pp_tu {}
.header {
color: #FFF;
font-size:44px;
font-family:"Trebuchet MS", Arial, Helvetica, sans-serif;
margin-left:10px;}
.header_small {
color: #FFF;
font-family:"Trebuchet MS", Arial, Helvetica, sans-serif;
font-size: 25px;
margin-left:10px;}
#content_wrap #side_bar h1 {
font-family:"Trebuchet MS", Arial, Helvetica, sans-serif;
color: #4b4a4a;
font-size:20px;
padding-left:15px;}
#content_wrap #content p {
color: #484747;
text-align:center;
font-family:"Trebuchet MS", Arial, Helvetica, sans-serif;
font-size:20px;
padding-right:15px;}

Hi guys,
Thanks for your help but still having a few problems;
In design view the code you advised I should add seems to have placed #shopping_cart back into #wrap under #title and above #content_wrap but hasn't when previewed in browser as there is no margin between #content_wrap & #shopping_cart.
#side_bar and #content now seem to sit side by side each other fine in design view and in the browser, however #footer which is in #content_wrap but under #side_bar and #content is behind #side_bar and #content. How do I get #footer to position under #side_bar and #content?
I have added a green background to #footer to make it stand out. I have also added two images one of the site in design view and one previewed in the browser so you can see the difference. I've also pasted the amended code.
Again thanks for your continued help and advice.
<body>
<div id="wrap">
<div id="title"></div>
<div id="shopping_cart"></div>
<div id="content_wrap">
<h2 class="header">Header goes here</span></h2>
<div id="nav_bar">
<table>table goes here</table>
</div>
<div id="side_bar">
<h1>text here</h1>
<table>table goes here</table>
</div>
<div id="content">
<p>text here</p>
<div id="content_image"></div>
</div>
<div id="footer">
<div id="logo"></div>
<div id="flags"></div>
<div id="v_wd"></div>
</div>
</div>
</div>
</body>
CSS
body {
background:url(images/body_bg.png) no-repeat center center fixed;
-webkit-background-size: cover;
-moz-background-size: cover;
-o-background-size: cover;
background-size: cover;}
#wrap {
width:895px;
margin:0 auto;
overflow:hidden;}
#title {
background:url(images/title.png);
height:67px;
width:895px;
margin-top:50px;
margin-left:auto;
margin-right:auto;}
#shopping_cart {
background: url(images/shopping_cart.jpg);
height:46px;
width:142px;
margin-top:15px;
margin-right:25px;
float:right;}
#content_wrap {
background:url(images/content_bg.png) repeat;
border:2px solid #666;
width:862px;
margin-top:15px;
margin-left:auto;
margin-right:auto;
overflow: hidden;
clear: both;}
#nav_bar {
width:809px;
height:59px;
margin-left:26px;}
#side_bar {
height:auto;
width:285px;
margin-top:20px;
border-right:1px solid #666;
float:left;}
#content {
height:auto;
width:575px;
margin-top:20px;
float:right;}
#content_image {
background-image:url(images/couple.jpg);
height:184px;
width:271px;
margin:0 auto;}
#footer {
background-color:#0F0;
width:860px;
height:200px;}
#kejo_logo {
background-image:url(images/kejo.png);
height:100px;
width:227px;}
#flags {}
#viscari_wd {}
#copyright {}
#pp_tu {}
.header {
color: #FFF;
font-size:44px;
font-family:"Trebuchet MS", Arial, Helvetica, sans-serif;
margin-left:10px;}
.header_small {
color: #FFF;
font-family:"Trebuchet MS", Arial, Helvetica, sans-serif;
font-size: 25px;
margin-left:10px;}
#content_wrap #side_bar h1 {
font-family:"Trebuchet MS", Arial, Helvetica, sans-serif;
color: #4b4a4a;
font-size:20px;
padding-left:15px;}
#content_wrap #content p {
color: #484747;
text-align:center;
font-family:"Trebuchet MS", Arial, Helvetica, sans-serif;
font-size:20px;
padding-right:15px;}

How to apply style sheet (.css) in Weblogic directory listing

Hi,
We are migrating a directory listing application from Apache to Weblogic.
Earlier we did this by Apache httpd.conf entry like below :
<Directory "/opt/apache/httpd-2.1.9/htdocs/Myreportfolder">
IndexOptions FancyIndexing FoldersFirst NameWidth=* XHTML
IndexOrderDefault Descending Date
IndexStyleSheet "/css/style.css"
</Directory>
/opt/apache/httpd-2.1.9/htdocs folder has all it's usual resource files.
We were able to see documents in "Myreportfolder".
Now we have moved to Weblogic and using virtual directory mapping as below and we are trying to achieve the same thing:
<?xml version="1.0" encoding="UTF-8" ?>
- <wls:weblogic-web-app xmlns:wls="http://www.bea.com/ns/weblogic/weblogic-web-app" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://www.bea.com/ns/weblogic/weblogic-web-app http://www.bea.com/ns/weblogic/weblogic-web-app/1.0/weblogic-web-app.xsd">
- <wls:container-descriptor>
<wls:index-directory-enabled>true</wls:index-directory-enabled>
<wls:index-directory-sort-by>LAST_MODIFIED</wls:index-directory-sort-by>
</wls:container-descriptor>
- <wls:virtual-directory-mapping>
<wls:local-path>/Myreportfolder</wls:local-path>
<wls:url-pattern>/*</wls:url-pattern>
</wls:virtual-directory-mapping>
<wls:context-root>/getreports</wls:context-root>
</wls:weblogic-web-app>
We are able to view the reports but we do not get look-and-feel of Apache like directory listing.
but we encounter below issues:
1) File/Folder icons are not visible - we want to use style sheets in http header from the response that is returned from weblogic server
2) Filename is limited to 29 characters when it is showing
3) Files are not sortable as Descending order - we sorted using tag <wls:index-directory-sort-by>LAST_MODIFIED</wls:index-directory-sort-by> but the latest file is shown at the last
We are thinking that Weblogic must be having some configuration like Apache httpd.conf where we can apply style sheets (css ).
We would appreciate af anyone can provide better insight into the issue.
or is it possible to extend weblogic.servlet.fileservlet class to serve this purpose.
Thanks & regards,
Rabi

Hi Vikash,
Check the below links which will you idea on the same.
Stylesheet for WDA without integrating in SAP Portal
Apply custom css to WebDynpro application
Thanks
KH

Applying a shortcut to "Apply "style" then next style"

In CS2, is there a way to apply a keyboard shortcut to the "Apply 'style name' then next style" command in the paragraph styles menu.
thanks
jon

Gerald,
I retrieved the script for CS2 which I've copied below. I changed the name of the tag to fit my book but I have a problem running it. When it gets to the line:
if (app. selection. length> 0) {
I get an error: undefined is not an object
Can you offer any quick help? Thanks very much. Script below:
/ FirstAndNextStyles.jsx
var myFirstPStyle = "X Appendix Co. Name";
Object.prototype.isText = function()
switch(this.constructor.name)
case "InsertionPoint":
case "Character":
case "Word":
case "TextStyleRange":
case "Line":
case "Paragraph":
case "TextColumn":
case "Text":
case "TextFrame":
return true;
default :
return false;
if (app.selection.length > 0) {
var myDoc = app.documents[0];
for (oneSel = 0; oneSel < app.selection.length; oneSel++) {
if (app.selection[oneSel].isText()) {
// apply paragraph style to the first of selected paragraphs
try {
app.selection[oneSel].paragraphs[0].appliedParagraphStyle = myDoc.paragraphStyles.item (myFirstPStyle);
catch(e){
// apply paragraphs next style to the following paragraphs
if (app.selection[oneSel].paragraphs.length > 1) {
for (oneP = 1; oneP < app.selection[oneSel].paragraphs.length; oneP++)
app.selection[oneSel].paragraphs[oneP].appliedParagraphStyle = app.selection[oneSel].paragraphs[oneP-1].appliedParagraphStyle.nextStyle;
else if ((app.selection[oneSel].paragraphs.length == 1) && (app.selection[oneSel].paragraphs[0].insertionPoints[-1].paragraphs[0])) {
app.selection[oneSel].paragraphs[0].insertionPoints[-1].paragraphs[0].appliedParagraphSty le = app.selection[oneSel].paragraphs[0].appliedParagraphStyle.nextStyle;

Can't Apply Styles

I have a working Pages doc. There is a ton of info in a word doc I need to include. When I copy paste it into Pages, I then can not apply styles from the style drawer. What is that all about? Is there some way to be able to apply styles to info I paste? I dropped word because it displays ridiculous behavior like this. Is pages just as much of a useless time waster? Any help would be appreciated I'm extremely frustrated. Who has time for this kind of annoyance?!?!?!

You have to select the text you want to use a style on.
For more information on Styles download the Pages User Guide. It is downloadable from your Pages Help menu.

Apply styles to subpictures

Can I somehow apply styles to subpictures in Encore? Basically, I want to customize the look of text-buttons in three states: normal, selected and activated using styles (eg to make them glow,change stroke color etc) rather then simply change the color of the text.
I also tried to find an option to make a text as text or as button transperent (with a colour stroke style applied so you can actually read it) but couldn't :( Is it at all possible?
Thanks for any advice

In a word, no.
You may be able to apply styles, but they will be ignored when you preview the menu or build the DVD.
In the DVD-Video format, a subpicture is defined as a 2-bit RLE graphic overlay - one color value, and one opacity value. That means no drop shadows, glows, gradients, etc can be rendered by DVD players for subpicture information.
A color table is used for the subpicture layer that allows you to combine up to three of these 2 bit graphics. Using this color table, you can get a little tricky and use up to three different 2-bit graphics to make the subpicture look a bit more impressive. There's a tutorial on this site that shows how to do that.
But even using this trick, DVD-Video subpictures will never even get close to looking like Photoshop styles on a 32 bit monitor. :)
I don't understand the second part of your post. Can you clarify what it is you are trying to do there? (it seems separate from the styles question)

Create/find tables and apply style

Hello,
I'm very new to scripting. I want to learn the basics like creating a table, creating anchored frames, textframes, etc.
Now, I want to create/find tables in a document and I would like to apply styles. I saw a script to do this. When I paste the script in Extendscript CS4, than the program crash.
The program crash in part 1. When I create another script with only part 2 (see //part 2) then there is no problem.
What do i wrong? And can anyone tell me what part 1 of the script do?
Thanks,
// part 1
// using your version; I'd prefer to return 0 if table not found
function findTable(obj) {
         while (obj.constructor.name != "Table") {
        obj = obj.parent;
        if (obj.constructor.name == "Application") {
            throw "Can't find table"
    return obj
// part 2
var myTable = 0;
if (app.documents.length > 0 && app.selection.length > 0)
    myTable = findTable(app.selection[0]);
// check for at least enough rows for 1 top row, 1 body row, 1 bottom row
if (myTable != 0 && myTable.rows.length >= 3) {
    // delete all rules; set insets to 0
    myTable.cells.everyItem().appliedCellStyle = "[None]";
    // format bottom row
    // (remember rows uses 0-based count)
    a = myTable.rows.length - 1;
    myTable.rows[a].cells.everyItem().appliedCellStyle = "4.cell_body_last";
    // format middle rows
    first = 1;
     last = myTable.rows.length - 2;
    for (a = first; a <= last; ++a)
        myTable.rows[a].cells.everyItem().appliedCellStyle = "3.cell_body";
    // format top row
    a = 0;
    myTable.rows[a].cells.everyItem().appliedCellStyle = "2.cell_header";

Part 1 expects the text cursor to be anywhere inside a table -- either in the regular text, or with a cell, row, column, or the entire table selected.
It walks "up" using its parent until it arrives at the table object itself.
This will only work if the text cursor actually is anywhere inside a table. It does nothing when you are somewhere else, and it only works with the "current" table.

Problems losing quality when going from develop module to library module ?? anyone have a fix

Problems losing quality when going to library module from develop module. Sharpness and color quality decrease

This is normal. There will be a difference as you are comparing Library Previews with the image in Develop which accesses the original file, although the difference is usually slight. Real results need to be judged from exporting after selecting the output sharpening e.g. for glossy paper, if printing or screen sharpening for web images or emailing.
The idea with sharpening is to apply capture sharpening so that the image in Develop looks just sharp but not over sharp. Lightroom then uses the correct algorithm for output sharpening based upon image size and quality settings etc.

Router Dead , when i applied QOS on virtual-temp interface for vpn !!

hi all ,
i have a simple brief topology below :
PSTN======(R1-7206)>F1=======F2>(R2-7604 catalyst)>>>F1=========Internet
i have two router
R2========>MLS 7604
R1======>cisco 7204
on R2 , Im doing matching to QOS by dscp , im matching acls ips from internet with dscp values :
here is CONFIG for matching :
Gateway7600#sh policy-map LLQX
Policy Map LLQX
    Class YOUTUBE
      set ip dscp af43
    Class FACEBOOKVIDEOS
      set ip dscp af33
    Class HTTP
      set dscp af23
    Class DNSQOS
      set dscp af13
    Class class-default
      set ip dscp af11
================
Gateway7600#sh class-map
Class Map match-all FACEBOOKVIDEOS (id 7)
   Match access-group name facebookvideos
Class Map match-all DNSQOS (id 8)
   Match access-group name dnsqos
Class Map match-all HTTP (id 6)
   Match access-group name browsing
Class Map match-any class-default (id 0)
   Match any
Class Map match-all YOUTUBE (id 5)
   Match access-group name youtube
Gateway7600#
=========================================================
on this router i applied this policy map on interfaxce F1 in direction
and here matching is well :
Gateway7600#sh policy-map interface gigabitEthernet 1/5 in
GigabitEthernet1/5
Service-policy input: LLQX
    class-map: rate-limit (match-all)
      Match: access-group name rate-limit
      police :
        4088000 bps 384000 limit 384000 extended limit
      Earl in slot 1 :
        139044930 bytes
        30 second offered rate 143032 bps
        aggregate-forwarded 134420937 bytes action: transmit
        exceeded 4623993 bytes action: drop
        aggregate-forward 22544 bps exceed 0 bps
    class-map: YOUTUBE (match-all)
      Match: access-group name youtube
      set dscp 38:
      Earl in slot 1 :
        132693939697 bytes
        30 second offered rate 212144928 bps
        aggregate-forwarded 132693939697 bytes
    class-map: FACEBOOKVIDEOS (match-all)
      Match: access-group name facebookvideos
      set dscp 30:
      Earl in slot 1 :
        10726758352 bytes
        30 second offered rate 20682720 bps
        aggregate-forwarded 10726758352 bytes
    class-map: HTTP (match-all)
      Match: access-group name browsing
      set dscp 22:
      Earl in slot 1 :
        56874058537 bytes
        30 second offered rate 92669832 bps
        aggregate-forwarded 56874058537 bytes
    class-map: DNSQOS (match-all)
      Match: access-group name dnsqos
      set dscp 14:
      Earl in slot 1 :
        160308954 bytes
        30 second offered rate 303552 bps
        aggregate-forwarded 160308954 bytes
    class-map: class-default (match-any)
      Match: any
      set dscp 10:
      Earl in slot 1 :
        67394864030 bytes
        30 second offered rate 126884864 bps
        aggregate-forwarded 67394864030 bytes
=================================================================================
now the problem is below
on router 7200 , it is LNS router connected with LAC roiuter for ADSL customers.
now here is config of policy map on 7200 router:
R11#sh policy-map
Policy Map MATCH_MARKS
    Class MATCH_YOUTUBE
      bandwidth 220000 (kbps)
    Class MATCH_FACEBOOKVIDEOS
      bandwidth 20000 (kbps)
    Class MATCH_HTTP
      bandwidth 100000 (kbps)
=========================================================
R1#sh class-map
Class Map match-all MATCH_FACEBOOKVIDEOS (id 2)
   Match ip dscp af33 (30)
Class Map match-all MATCH_HTTP (id 3)
   Match ip dscp af23 (22)
Class Map match-any class-default (id 0)
   Match any
Class Map match-all MATCH_YOUTUBE (id 1)
   Match ip dscp af43 (38)
==========================================================
here is virtual-template interface before i apply the QOS
R1#sh running-config interface virtual-template 1
Building configuration...
Current configuration : 352 bytes
interface Virtual-Template1
bandwidth 1000000
ip unnumbered Loopback0
ip tcp adjust-mss 1412
ip policy route-map private
no logging event link-status
qos pre-classify
peer default ip address pool bitsead1 bitsead2
ppp mtu adaptive
ppp authentication pap vpdn
ppp authorization vpdn
ppp accounting vpdn
max-reserved-bandwidth 90
end
=========================================
when i apply the command
(service-poliy output MATCH_MAKRS ) under virtual-template interface i have console logs :
Insufficient bandwidth 149760 kbps for the bandwidth guarantee (220000)
Insufficient bandwidth 149760 kbps for the bandwidth guarantee (220000)
Insufficient bandwidth 149760 kbps for the bandwidth guarantee (220000)
also i have
*Jul 9 22:28:38.242: Interface Virtual-Access2551 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 9 22:28:38.250: Interface Virtual-Access627 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 9 22:28:38.258: Interface Virtual-Access786 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 9 22:28:38.266: Interface Virtual-Access623 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 9 22:28:38.274: Interface Virtual-Access2559 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 9 22:28:38.282: Interface Virtual-Access2281 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 9 22:28:38.290: Interface Virtual-Access142 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 9 22:28:40.262: %SYS-2-INTSCHED: 'suspend' at level 3 -Process= "VTEMPLATE Background Mgr", ipl= 3, pid= 278, -Traceback= 0x756FF0z 0x3439C58z 0x2778D70z 0x2CACCD0z 0x2CC63E0z 0x2CC7FF8z 0x2CADC74z 0x2CBE058z 0x2CA0340z 0x2CA04F8z 0x2E0BB18z 0x2D23378z 0x2D1825Cz 0x2D18738z 0x2E66FE0z 0x2D971ACz
*Jul 9 22:28:40.262: %SYS-2-INTSCHED: 'suspend' at level 3 -Process= "VTEMPLATE Background Mgr", ipl= 3, pid= 278, -Traceback= 0x756FF0z 0x3439C58z 0x2778D70z 0x2CACD28z 0x2CC63E0z 0x2CC7FF8z 0x2CADC74z 0x2CBE058z 0x2CA0340z 0x2CA04F8z 0x2E0BB18z 0x2D23378z 0x2D1825Cz 0x2D18738z 0x2E66FE0z 0x2D971ACz
after i apply it ,
the cpu is 100 % and the router got down !!!
now
what is the problem ????
here is ios for 7200 router
R1#sh version
Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version 12.4(24)T7, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 28-Feb-12 12:53 by prod_rel_team
ROM: System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
Bras1 uptime is 13 weeks, 1 day, 9 hours, 24 minutes
System returned to ROM by reload at 16:24:51 GMT+3 Tue Jun 17 2003
System image file is "disk2:c7200p-adventerprisek9-mz.124-24.T7.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 7206VXR (NPE-G2) processor (revision A) with 917504K/65536K bytes of memory.
Processor board ID 36858624
MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2
6 slot VXR midplane, Version 2.11
Last reset from power-on
PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb1 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
for c7200 bandwidth points oversubscription and usage guidelines.
1 FastEthernet interface
3 Gigabit Ethernet interfaces
2045K bytes of NVRAM.
250880K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
==============================================================================
wish to Help ASAP
regards

hi ,
i did
the same issue ,
i did a TEST policymap that has 30 percent gurantee
but the same result!!!!!!!!!!!!!!!!
the router god down agian !
here is logs :
take effect on the queueing features configured via service-policy
*Jul 11 02:40:33.605: Interface Virtual-Access1896 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:33.797: Interface Virtual-Access1317 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:33.809: Interface Virtual-Access993 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:33.817: Interface Virtual-Access1699 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:33.981: Interface Virtual-Access254 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:33.993: Interface Virtual-Access687 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.001: Interface Virtual-Access35 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.009: Interface Virtual-Access160 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.017: Interface Virtual-Access1337 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.029: Interface Virtual-Access1670 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.037: Interface Virtual-Access1948 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.049: Interface Virtual-Access1669 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.109: Interface Virtual-Access1334 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.117: Interface Virtual-Access151 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.125: Interface Virtual-Access761 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.137: Interface Virtual-Access810 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.197: Interface Virtual-Access1522 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.237: Interface Virtual-Access1692 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.257: Interface Virtual-Access368 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.305: Interface Virtual-Access1758 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.317: Interface Virtual-Access2061 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.325: Interface Virtual-Access1203 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.337: Interface Virtual-Access188 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.345: Interface Virtual-Access1975 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.357: Interface Virtual-Access1172 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.509: Interface Virtual-Access1647 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.517: Interface Virtual-Access458 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.609: Interface Virtual-Access608 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.621: Interface Virtual-Access2128 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.633: Interface Virtual-Access1167 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.641: Interface Virtual-Access487 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.653: Interface Virtual-Access1793 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.665: Interface Virtual-Access2280 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.769: Interface Virtual-Access839 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.781: Interface Virtual-Access2311 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.793: Interface Virtual-Access1788 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.857: Interface Virtual-Access8 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.869: Interface Virtual-Access2243 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:34.881: Interface Virtual-Access580 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:35.057: Interface Virtual-Access6 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:35.065: Interface Virtual-Access1331 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:35.077: Interface Virtual-Access1235 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:35.177: Interface Virtual-Access1748 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:35.189: Interface Virtual-Access2262 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Jul 11 02:40:35.205: Interface Virtual-Access2136 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
i want to ask a question , could this be from IOS ????

ITunes 11.1.4 will not install properly - windows 8.1, 64 bit. My only way to recover is to restore my system. iTunes 11.1.3.8 functions properly. When will Apply provide a workable update?

iTunes 11.1.4 will not install properly - windows 8.1, 64 bit. The only way I have found to recover is to restore my system. I have unistalled/reintalled iTunes two times. No success. iTunes 11.1.3.8 functions properly (following system restore). When is Apply expected to provide a workable update?

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Shortcut to: Apply (style), Clear Overrides ?

Hi there,
I'm working on a approx 100pg price list that I've set up a tables for, and the design of it has changed slightly (sigh). It looks like a basic excel spreadsheet and I have imported the text already. Basically, I'm going through and applying a cell style to various rows, not equidistant from each other -- some 3 rows apart, some 15. I need to, and have been, highlighting the row, right-clicking the particular cell style, and doing the "Apply (style), Clear Overrides" to get the desired result. So, what I was wondering, Is there ANY way to create a shortcut to do this? I know how to apply the style with a shortcut, but not the overrides option.
Even better, if anyone knows how to select multiple rows at once and apply, that would be fantastic.
Love this forum and thanks in advance!

I was just thinking about that cost/benefit analysis on my way to work this morning. If it takes me a whole hour to gin up that script, then how many months before I make those hours back in time saved? My parastyles always have numpad shortcuts (e.g. Control + numpad 8), and my "Clear All Overrides" shortcut is Control + Shift + numpad Enter, so it might be a long, long time before the saved fraction of a second from using a single script instead of two keyboard shortcuts that are right next to one another adds up to the hour of Javascript fumbling.
(Then again, if I cared that much about saving milliseconds, I wouldn't be posting this. )

Set background color when condition applied

hi,
Can anybody tell me how to set background color when condition applied.
My initial plan was to highlight a specify row(Change color) when the third column of this JTable consists of OK word.
int rowCount = table.getRowCount();
for(int i=0 ;i <rowCount ; i++)
String word = table.getValueAt(i,3).toString();
if(word.equals("Word")) {
table.setSelectionBackground(Color.red);
break;
else {
table.setBackground(getBackground());
Thanks.

import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.table.*;
public class TableChanges
    public TableChanges()
        String[] headers = { "column 1", "column 2", "column 3", "column 4" };
        int rows = 18;
        int cols = 4;
        String[][] data = new String[rows][cols];
        for(int row = 0; row < rows; row++)
            for(int col = 0; col < cols; col++)
                data[row][col] = "item " + (row * cols + col + 1);
        JTable table = new JTable(data, headers);
        // add custom cell renderer to each column
        TableColumnModel columnModel = table.getColumnModel();
        for(int j = 0; j < columnModel.getColumnCount(); j++)
            TableColumn col = columnModel.getColumn(j);
            col.setCellRenderer(new CellRenderer());
        // add table model listener to listen for cell edits
        // so we can detect our special selection edit value
        // which is "word"
        TableModel tableModel = table.getModel();
        tableModel.addTableModelListener(new ModelListener(table));
        JScrollPane scrollPane = new JScrollPane(table);
        JFrame f = new JFrame();
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.getContentPane().add(scrollPane);
        f.setSize(400,400);
        f.setLocation(200,200);
        f.setVisible(true);
        Dimension d = scrollPane.getViewport().getSize();
        table.setRowHeight(d.height/rows);
    public static void main(String[] args)
        new TableChanges();
class ModelListener implements TableModelListener
    JTable table;
    public ModelListener(JTable table)
        this.table = table;
    public void tableChanged(TableModelEvent e)
        int firstRow = e.getFirstRow();
        int lastRow = e.getLastRow();
        int colIndex = e.getColumn();
        if(e.getType() == TableModelEvent.UPDATE &&
              firstRow != TableModelEvent.HEADER_ROW &&
              colIndex != TableModelEvent.ALL_COLUMNS &&
              colIndex == 2)                            // column 3 only
            String value = (String)table.getValueAt(firstRow, colIndex);
            // check for our special selection criteria
            if(value.equals("word"))
                for(int j = 0; j < table.getColumnCount(); j++)
                    CellRenderer renderer =
                        (CellRenderer)table.getCellRenderer(firstRow, j);
                    renderer.setSpecialSelection(firstRow, j);
class CellRenderer extends DefaultTableCellRenderer
    int specRow, specCol;
    public CellRenderer()
        specRow = -1;
        specCol = -1;
    public Component getTableCellRendererComponent(JTable table,
                                                   Object value,
                                                   boolean isSelected,
                                                   boolean hasFocus,
                                                   int row, int col)
        setHorizontalAlignment(JLabel.CENTER);
        Color color = Color.black;
        if(hasFocus)
            color = Color.blue;
        else if(isSelected)
            color = Color.green.darker();
        else if(row == specRow && col == specCol)
            color = color.red;
        setForeground(color);
        setText((String)value);
        return this;
    public void setSpecialSelection(int row, int col)
        specRow = row;
        specCol = col;
}

When I apply the Key for a green screen, everything blue turns purple. How can I correct?

When I apply the Key to an evenly lit greenscreen, anything blue turns purple. How can I correct this?

There's way too much blue in that green screen
This is green
Try pulling down the spill level and reducing the spill tint. You're probably going to have to tweak the color selection manually.

Losing Itals When I Apply Styles

Similar Messages

Maybe you are looking for