Losing Lookup Condition after import

For transferring a project from development to test (and later production) we're using metadata export/import.
After import into the 'test repository' we noticed that in a mapping the Lookup Condition of several Key Lookups are missing, in fact these Key Lookups are all using the same Table definition.
Has anyone experienced this problem?
And, of course, is there a cure?
We're using
Warehouse Builder 9.0.3.37.0
Repository 9.0.3.0.1
Oracle db. 9.2.0.2.1
Regards,
Peter van Leeuwen

We resolved this issue.
The problem occurs when table names are long. The original table names was 27 characters long. In a mapping we have 3 lookups all based on the same table.
We lost the lookup condition in 2 cases, that is project export/import (from Development to Test) and copy mapping.
We solved the problem by shortening the table name.
Peter

Similar Messages

  • How do I import images from my hard drive without losing resolution? My original files after import are significantly smaller. What should I do?

    How do I import images from my hard drive without losing resolution? My original files after import are significantly smaller. What should I do?

    Hi Keith, and all others chiming in, I do have the correct option checked in advanced settings telling iPhoto to copy the images into the library. What is a refernced library? Perhaps this is where I am getting confused. I exported my entire photo library from an old iMac5 to my external hard drive, from there I attempted to import the entire library to my new iMac. Am I overlooking an obvious and easy way to import from the hard drive to the new iMac--I dragged the entire photo pholder from the hard drive to the open window of iPhoto on the new computer. Now, I only get preview file sizes in iPhoto, unless I have my external drive open. Perhaps I need to import the original images from the hard drive in a different way...?! (This is making me feel pretty stupid.)

  • Lookup Conditions

    Hello.
    I have a business requirement where I need to do currency conversions in ETL. We are a global organization. I'm working with two tables. One contains general ledger journal entry line data. This data has amounts recorded in one of 50+ local currencies. I have a second table that contains all historical currency conversion rates to be used to convert any local currency to one of three base currencies. The results should then be loaded into a fact table.
    For example, Table A has a journal entry line recorded in Yen. I need to use the currency conversion rate table, Table B, to convert that to US Dollars, Danish Kroner, and Indian Rupee. Those three conversions are each then a column in my fact table. The journal entry has an effective date which represents the date the entry was posted and therefore the date to be used for currency conversion. Furthermore, each row in the currency conversion table has a start and end date that indicates the time period that the currency conversion was valid. These start and end dates are not necessarily the same, so I need to lookup the conversion based on the following:
    Table_A.Local_Currency_Type = Table_B.Local_Currency_Type
    and
    Table_A.Effective_Date >= Table_B.Start_Date
    and
    Table_A.Effective Date <= Table_B.End_Date
    The results should return the Base Currency Type and the conversion rate from local to one of the three base currencies, one each for USD, DKK and INR base currencies. So for every one row of input 3 rows should be found.
    I'm using OWB 10.2.0.2.8 and see that I can't edit the lookup condition in the mapping editor.
    So, two questions: 1. Does a newer version of OWB allow for editing the lookup condition? 2. Can any of you provide guidance on alternative solutions for this issue?
    Thanks for your time.

    Hi, Scott.
    The only reason I considered the lookup was that I hadn't fully thought my design through. After a few more hours (ugh) I was able to redesign with a JOINER.
    Thanks for the feedback.
    Dan

  • Execution of programs after import (XPRA) error during transports

    Hi Experts
    I am applying the support stack level from 18 to 19. On applying the ABAP support pack i am getting the error.  (Ehp1- support pack)
       Execution of programs after import (XPRA)
       Transport request   : SAPKNA7013
       System              : RIS
       tp path             : tp
       Version and release: 372.04.40 701
       Post-import methods for change/transport request: SAPKNA7013
          on the application server: mel-srv-sap1
       Post-import method ENHS_AFTER_IMPORT started for ENHS L, date and time: 20090820182438
       Post-processing for ENHS /SAPCND/CONFIGURATION was already performed successfully earlier
       Post-processing for ENHS /SAPCND/GEN_AFTER_IMPORT was already performed successfully earlier
       Post-import method ENHS_AFTER_IMPORT completed for ENHS L, date and time: 20090820182438
       Post-import method ENHO_AFTER_IMPORT started for ENHO L, date and time: 20090820182438
       Post-processing for ENHO PRT_CONFIGURATION_EXIT was already performed successfully earlier
       Post-processing for ENHO REF_AFTER_IMPORT_EXT was already performed successfully earlier
       Post-processing for ENHO REF_CONFIGURATION_EXIT was already performed successfully earlier
       Post-processing for ENHO TTE_CONFIGURATION_EXIT was already performed successfully earlier
       Post-import method ENHO_AFTER_IMPORT completed for ENHO L, date and time: 20090820182438
       Post-import method /SAPCND/TRN_AFTER_IMPORT_OW started for CTAP L, date and time: 20090820182438
       Transport: Execution of method /SAPCND/TRN_AFTER_IMPORT_OW
       Mass activation off
       Transport: Execution of method /SAPCND/TRN_AFTER_IMPORT_O_OW
       End of processing of condition tables for order SAPKNA7013, time 18:24:38
    Program terminated (job: RDDEXECL, no.: 18243800)
       See job log
    Execution of programs after import (XPRA)
    End date and time : 20090820182453
    Ended with return code:  ===> 12 <===
    When i click on the job log i get the following details:
    Job log overview for job:    RDDEXECL / 18245300
    Date       Time     Message text
    20.08.2009 18:24:53 Job started
    20.08.2009 18:24:53 Step 001 started (program RDDEXECL, variant , user ID DDIC)
    20.08.2009 18:24:53 All DB buffers of application server mel-srv-sap1 were synchronized
    20.08.2009 18:24:53 ABAP/4 processor: SYNTAX_ERROR
    20.08.2009 18:24:53 Job cancelled
    Please help me to resolve the issue. Thanks in advance.
    Thanks & Regards

    Hello Folks,
                       Thank you all for your help. I apologize for the delay. Apparently SAP had a few SAP notes to suggest for my issue and once the notes were implemented, the problem got resolved. Here are the notes for your reference:
    1114409
    1113718
    1059837
    1055217
    Regards,
    Prashant

  • Automatic SWU_OBUF after import

    Hello,
    does anybody have a feedback, advice or thought about running SWU_OBUF automatically after import of a transport request in a target system? I don't know if it can be dangerous or not, or if there is another solution.
    We have many systems and administrators forget to run this transaction when workflow transports are done during the day. That makes us losing lot of time for analysis, doing tests again, etc.
    I think of creating a SWU_OBUF batch input and run it using AFTER_IMP method of PDWS object, and sRFC to run it on the right target client.
    Thanks a lot
    Sandra

    Sandra,
    I was reading that the program Rick mentioned could be used. I'm not 100% it is the same program since SWU_OBUF calls a different program, but they might end up calling the same code any way.
    See this link from the SAP-WUG Archinve [http://mailman.mit.edu/pipermail/sap-wug/2006-June/022956.html].
    In the worst case, you can just write a simple program that does a CALL TRANSACTION.
    Nabheet,
    Sandra didn't want to run it frequently. She needed it only upon importing a transport into a system. I'm not aware of anything available with the standard system so I suggested that she schedules the job to run more frequently on non-production systems. If you are aware of any automated method, it'll be great if you share with us.
    Regards,
    Abdullah

  • Can not refresh snapshot changes after importing data of master site

    Hello !
    I have two database computer,one as master site,one as snapshot site.Because the error of the hard disk of master computer,I use the exporting data file to recover my database.after importing ,I found I can't refresh the refreshgroup on snapshot,who can tell me why?
    thinks in advance!
    (exp system/manager full=y inctype=complete file='/home/save/backdata/xhsdcomp.dat')
    (imp system/manager inctype=system full=Y file='/home/save/backdata/xhsdcomp.dat'
    imp system/manager inctype=restore full=Y file='/home/save/backdata/xhsdcomp.dat')
    null

    You haven't listed the errors that you're receiving when attempting to refresh your refresh group, but if your snapshots are attempting to fast refresh, I suspect it's because the creation timestamp of the snapshot log on the master site is newer than the creation timestamp of the snapshot. In this case you will need to do a complete refresh of the snapshot (or drop and recreate the snapshot) before you will be able to fash refresh it again.
    If this is not the case, please post the errors you are receiving when you attempt to refresh the refresh group.
    HTH,
    -- Anita
    Oracle Support Services
    null

  • Apex Application not working after importing to my apps schema...

    Hi friends,
    I created one DB application in my sample schema that is associated with apex 4.0.....
    Application details:
    *) login page(where i will be giving username and password)
    *) page 1 (consist of several form fields, like
    --->name:
    --->module:
    --->projects:
    ----->email:
    the above are the fields, if i put any entries in the above field means, it will get automatically inserting in the report column, which is also in the same page consist of the above fields in the table manner...
    since this report table consist of an edit icon in front, if i clicked the edit icon of an one row means, it will go to another page..
    *) i.e. page 3(consist of the same fields with entries in it automatically corresponding to the each and every row, suppose if i want to update any changes means i can update in it....
    this is my application that i developed it is working well with in the sample schema apex 4.0..
    What i did is i created a new workspace with APPS schema in it...and i have imported my application that i developed in sample schema to APPS schema....
    Since after importing to APPS schema...when i tried to open the application, it is not showing any datas in it...That is due to the tables that are supporting the application is not in APPS schema, so what i did is i have given grant privilege to the respective tables and also i have created a synonym for accessing the table in APPS schema for supporting the application.....
    Now if i tried to put any entries in the form in page 2, it is getting inserting in the report column which is also in the page2....
    But my problem starts here, if i clicked the edit icon symbol in each and every row of the report column it is going to the page 3 which has a respective form fields, but it is not showing any entries in it automatically, and if i tried to put any entry in it, it is not getting updating in the report table......
    why this problem occurred for my application in APPS schema....But my application works very well within the sample schema......why it is not showing any entries in the form automatically soon after i clicked the edit icon in each and every row.....
    i couldn't know what is the real problem behind this..... help me friends.
    As this is my urgent requirement in my project..Reply me ASAP...
    Thanks in Advance..
    Regards,
    Harry...

    First, try a system reset although I can't give you any confidence.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Problem on CLOB datatype after import

    I got problem and call to Oracle support and they use DUL for extract data from datafile to dump file and I import everything is done and no error but when I check in CLOB datatype that have space(blank character) separate each character see below
    Original
    Oracle
    After Import
    O R A C L E
    So the application cannot execute those data.
    Anyone have solution how to fix this problem?
    Thanks,
    Taohiko

    if you use a direct insert you are restricted to 4000 characters.
    You can put your value in a varchar2 variable and that allows you to insert up to 32767 characters.
    declare
    my_clob_variable := rpad('x','X',25000);
    begin
    insert into my_table(my_clob_column)
    values(my_clob_variable);
    end;

  • My imported backup html files from another computer do not show up after import

    I am currently transferring files from my macbook pro to a pc netbook. I already exported my firefox bookmarks via an external drive and accessed the html file on my new netbook. After importing the html on firefox on my new netbook, the bookmarks do not show up on my bookmark list.

    Please see this article on how to move your bookmarks and settings from one computer to another: [[Moving your Firefox bookmarks and settings]].
    Caution: Restoring bookmarks from a backup will overwrite your current set of bookmarks with the ones in the backup file.

  • Cannot edit chapter names in iDVD after importing movie from iMovie

    I have no trouble customizing iDVD (version 5.0.1) menu page after importing iMovie directly (instead of going to QT as interim step). But the names of the chapter markers are file names for video clips, title pages and transitions. The iMovie help says to change the names in the space next to the 'thumbnails' of chapters found in iDVD. THERE ARE NO THUMBNAILS. And there is no way I could find, using menu options or clicking on the chapter frames shown in 'map' mode to type in anything.
    There are other problems, like getting rid of the default "Travel Cards' stuff...like I can drop a still photo in for a custom background, but the default 'celluloid design' banner still rolls up in previw mode. If you can also help with that, great. But the main thing right now is getting these chapter names change.

    VJK,
    You are the third person who has taken a crack at this. I don't know if you read my last reply which detailed the situation. But if you did and the 'menu' you refer to is the main menu page, that is not the problem; I can change text there. I am talking about the submenu for 'Scene Selections', which I have only been able to access via map mode.
    In map mode I cannot highlight the names. Period. Can't do it no matter where I place the cursor or carefully click.
    In preview mode, when the Scene Selection sub-menu page appears whenever you drag the cursor over a chapter name it automatically highlights so any clicking will either do nothing (if a real careful click, trying to highlight text and not trigger off play of the movie chapter) or just start play for the movie chapter.
    So...how does this newbie get to the 'menu' you mention where I can click on a chapter name in order to type new text?
    You will be able to change the names in the menu, but
    depending upon your mouse, etc, it can be a little
    particular.
    Place the cursor at the very beginning of the word
    you want to change. Click once .. this should hi-lite
    the word. Click again, it should make the word go
    blue (or in a blue box) then you can delete and
    re-type.
    Be sure to save the proj
    I have found that even after saving and successfully
    burning the project, if I return to it later the
    changes seem to have gone away ... so if you go back
    to it later, just double check that everything is
    kosher

  • How do delete photos from iphone after import to new photos app?

    With iphoto (or aperture which I own), after importing photos I was always asked if I wanted to remove the photos's from my phone. With the new photo's app I don't get that option, and I certainly don't want to delete 1200 photos by having to individually select each one on the phone. Any ideas?

    You should ask on the forum that Apple told you to use for Beta software discussions. This isn't the place. The moderators will likely soon remove your post.

  • Spoken work files will not play even after importing/converting?

    I have some audio files recorded on my Android phone with the basic recording app and the files play when I press the spacebar to preview them in Mavericks. However, after importing them into iTunes using various import settings, including the podcast spoken word ones, they just will not play. When I double click on the file it looks like it is about to play, the apple icon at the top switches to what looks like a progress bar, though it is different from other tracks that do play, and then it immediately switches back to the apple icon and does not play.
    Any ideas of anything I can do?
    Thanks.

    I've found an issue with movies when the audio is IMA format. Is that the format of your audio?

  • Could not able to see my customized BP after Importing

    Hi
    I am using Standard Business Package for SAP CRM4.0 60.2.3; it is stored in PCD -> Migrated Content
    I customized the Business Package and stored the content in my folder and transported the Business Package to Local (on Desktop) and Server (in server: C:\usr\sap\J2E\SYS\global\pcd\Export).
    I did not deleted the Standard BP from PCD/Migrated Content
    After importing the Customized Business Package from local system i could not able to see the Business Package in PCD.
    I could not able to see the Customized BP in PCD….. , Whether that Standard BP should be deleted before Importing
    What is the Default location it stores after importing?
    Plz help me to solve this issue its very urgent.
    Regards

    Hi Sanjay,
    There is no need to delete the Standard BP from PCD/Migrated Content.
    After customizing the business package and storing the content in your own folder, you have to add all objects to new transport package(by right clicking on main folder)then export it and download the epa to your local system.
    After importing the epa in some other portal, BP will sit under same path you have specified while creating business package(PCD).In sense, it will create the same PCD structure when you import epa in some other portal.
    You might have done some mistake while creating transport package and exporting it to your local system. You might not have added all object to new transport package.
    Hope this is of some help. Do write back in case you need further clarification
    Cheers
    Ruchi.

  • How do I eject iPhone after import to iPhoto?

    How do I eject iPhone after import to iPhoto?

    You don't need to eject the iPhone after importing, if it has vanished from iPhotos's source list in the sidebar. Then it has been dismounted.

  • Multiple alarms in ical after import

    is their a global way to remove a 2nd alarm that seems to have happened after importing from outlook. I have 2 alrms and i think this is making my ical file and entry numbers huge.
    Can you globally remove alarms and other ical event functions

    CaptainStarwars,
    FYI, this multiple alarm issue is affecting a lot of iCal users under a lot of different circumstances—not just import. Do a search and look for other threads.
    My observation is that MobileMe is responsible somehow. I fixed ALL my repeating events last week so that they all had a single alarm (like they're supposed to), and today duplicate alarms started showing up again.

Maybe you are looking for